New Approach to Lightning Strike Risk Assessment of Wind Farm

In the past,lightning strike risk assessment of buildings mainly referred to the Protection against Lightning—Part 2:Risk Management(IEC 62305-2-2010)based on protection angle method.Lightning strike risk assessment of wind farms was conducted according to the Lightning Protection for Wind Energy System(IEC 61400-24-2019),which proposed the method of lightning strike risk assessment for wind turbine.In fact,the basic idea of the two is the same,that is,the source of the lightning strike wind turbine is transformed from the former S1-S4 to the latter N D-N DJ.According to the above method,wind farm was evaluated,and it has been proved that the practice can not achieve good results.After 2018,China has issued the Guide to Evaluation of Lightning Protection Technology in Buildings(T/GZLY 3-2022)and the Technical Specifications for Lightning Interception in Forest Areas(T/LYCY 4062-2024)based on semicircle protection,in which the source of risk defined by lightning point was closer to the reality,highly targeted and effective.Taking offshore wind farm as an example,this paper introduced a new method of establishing six evaluation indicators to determine the risk level according to the principle of compliance and the new protection technology of semi-circular method,which can be used as a reference for technical personnel.

Flashover Probability of Wind Turbine Blade and Impact of Strong Electromagnetic Pulse from Lightning Strikes on Wind Turbine Safety

This paper systematically studies the flashover probability of wind turbine blade lightning arrester and the impact of strong electromagnetic pulses on the local and surrounding wind turbines during lightning strikes.The research results indicate that the flashover probability of direct lightning strikes by the wind turbine blade lightning arrester is almost negligible,and the strong electromagnetic pulse of wind turbine blade during lightning strikes has a serious impact on the electronic equipment of the machine,while the impact on the surrounding wind turbine is relatively small.At the same time,the calculation formula for the reflection of lightning current on the carbon brush between the wind turbine hub and the engine compartment during the flashing of the wind turbine blades is provided,and the calculation method for calculating the spatial gradient distribution of electromagnetic field intensity using Biot-Savart Law theorem is applied.The limitations of using wind turbine blades for lightning protection are pointed out,and a technical route for achieving wind turbine lightning safety is proposed,which can be used as a reference for wind turbine lightning protection technicians.