Direct scaling of residual displacements for bilinear and pinching oscillators

The estimation of residual displacements in a structure due to an anticipated earthquake event has increasingly become an important component of performance-based earthquake engineering because controlling these displacements plays an important role in ensuring cost-feasible or cost-effective repairs in a damaged structure after the event.An attempt is made in this study to obtain statistical estimates of constant-ductility residual displacement spectra for bilinear and pinching oscillators with 5%initial damping,directly in terms of easily available seismological,site,and model parameters.None of the available models for the bilinear and pinching oscillators are useful when design spectra for a seismic hazard at a site are not available.The statistical estimates of a residual displacement spectrum are proposed in terms of earthquake magnitude,epicentral distance,site geology parameter,and three model parameters for a given set of ductility demand and a hysteretic energy capacity coefficient in the case of bilinear and pinching models,as well as for a given set of pinching parameters for displacement and strength at the breakpoint in the case of pinching model alone.The proposed scaling model is applicable to horizontal ground motions in the western U.S.for earthquake magnitudes less than 7 or epicentral distances greater than 20 km.

Learning from socially driven frugal innovation to design the future of healthcare:A case of mobile Primary Health Center

Background and Aim:Despite their flaws,the low-cost but powerful economical solutions can ensure everyone has access to health.The main aim of this study is to extract characteristics of frugal innovation(FI)and social innovation(SI)for Primary Health Centers(PHCs)in low resource settings(LRS)for sustainable development.We will use the gained insights to design the mobile primary healthcare infrastructure using FI and SI strategies.There is a lack of methodology to design sustainable healthcare infrastructure for LRS.There is a gap in the literature about building sustainable infrastructure to provide basic healthcare facilities essential to the community.This article studies several factors necessary for designing sustainable infrastructure from the lens of FI,SI,and sustainability to develop a mobile healthcare infrastructure for last-mile people.Methods:Started with purposive sampled case studies to find out factors and criteria that most affect the success for an innovation to be frugal,social,and sustainable.The established criteria were used to design,develop,and deploy the mobile Primary Health Center(mPHC).Moving forward,we tested the system designed with stakeholders to gather insights.At this stage we found the feedback loop from the stakeholders and the role of interdisciplinary discussions between experts,medical officers,nurses,patient,and other staff of PHCs during the design,development,deployment,and test stage to be useful in taking design decisions efficiently.Results:The designed healthcare infrastructure of mPHC through the aspects of FI and SI proves to be efficient in providing key healthcare services to LRS.Conclusion:Focusing on essential capabilities and optimizing performance with technology,methodologies,and processes reduces costs in an innovation.Focus on socially inclusive and rebalancing power disparities,overcome societal challenges and improve human capabilities will create a sustainable and novel solution.

Scaling of residual displacements in terms of elastic and inelastic spectral displacements for existing SDOF systems

Structures undergoing inelastic displacements during earthquake ground motions are known to sustain some amount of residual displacements, which may make them unusable or unsafe. In this study an attempt is made to estimate residual displacements for elastic-perfectly-plastic single-degree-of-freedom oscillators with a given lateral strength ratio. It is observed in the case of a class of ground motions that there are no trends in the dependence of residual displacement on the temporal features of the ground motion, and thus any estimation of residual displacements should be carried out only in the statistical sense. Statistical estimation of residual displacement spectrum via normalization with respect to inelastic or elastic spectral displacements is considered, and it is found that normalization with respect to inelastic spectral displacements is preferable. Expressions for residual displacement spectra are proposed for both types of normalizations and for the givenlateral-strength-ratio type oscillators.

The role and significance of Magnesium in modern day research-A review

Magnesium is one of the largely available elements in the earth’s crust. It has a low structural density with high specific strength. This unique material property has forced an increase in the use of magnesium and its alloys in various applications pertaining to industrial sector,automobiles, aerospace and biomedical. Since magnesium is a highly reactive metal, it is prone to higher rate of corrosion as compared to its counterparts. Thus, it is essential to analyze the corrosion behavior of magnesium and its alloys in its applications. An appropriate process is to be followed in the design and development of magnesium alloys which overcome the limitations of magnesium and enhance the desired material properties in accordance to their applications. This review paper summarizes the importance of magnesium and its material properties. The influence of various alloying elements on the mechanical properties of magnesium is reviewed. The broad classification of Mg alloys and their behavioral trends are detailed. The corrosion behavior of magnesium and the influence of corrosion products on the material characteristics of magnesium, in aqueous medium, are discussed. The manufacturing techniques of magnesium alloys along with the secondary techniques are also covered. The various applications and the limitations of magnesium in these applications are covered. A complete section is dedicated towards detailing the recent trends of magnesium(Mg) alloys, i.e., the biodegradable nature and applications of Mg alloys. The influence of biocorrosion on Mg alloys and techniques to overcome it have been deliberated. This paper provides a thorough review on recent developments of magnesium with respect to engineering applications.

Function of longitudinal vs circular muscle fibers in esophageal peristalsis, deduced with mathematical modeling

We summarize from previous works the functions of circular vs. longitudinal muscle in esophageal peristaltic bolus transport using a mix of experimental data, the conservation laws of mechanics and mathematical modeling. Whereas circular muscle tone generates radial closure pressure to create a local peristaltic closure wave, longitudinal muscle tone has two functions, one physiological with mechanical implications, and one purely mechanical. Each of these functions independently reduces the tension of individual circular muscle fibers to maintain closure as a consequence of shortening of longitudinal muscle locally coordinated with increasing circular muscle tone. The physiological function is deduced by combining basic laws of mechanics with concurrent measurements of intraluminal pressure from manometry, and changes in cross sectional muscle area from endoluminal ultrasound from which local longitudinal shortening (LLS) can be accurately obtained. The purely mechanical function of LLS was discovered from mathematical modeling of peristaltic esophageal transport with the axial wall motion generated by LLS. Physiologically, LLS concentrates circular muscle fibers where closure pressure is highest. However, the mechanical function of LLS is to reduce the level of pressure required to maintain closure. The combined physiological and mechanical consequences of LLS are to reduce circular muscle fiber tension and power by as much as 1/10 what would be requiredfor peristalsis without the longitudinal muscle layer, a tremendous benefit that may explain the existence of longitudinal muscle fiber in the gut. We also review what is understood of the role of longitudinal muscle in esophageal emptying, reflux and pathology.

Investigation of dry sliding wear properties of multi-directional forged Mg-Zn alloys

Effect of multi-directional forging(MDF)on wear properties of Mg-Zn alloys(with 2,4,and 6wt%Zn)is investigated.Dry sliding wear test was performed using pin on disk machine on MDF processed and homogenized samples.Wear behavior of samples was analyzed at loads of ION and 20 N,with sliding distances of 2000m and 4000m,at a sliding velocity of 3m/s.Microstructures of worn samples were observed under scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),and x-ray diffraction(XRD)and the results were analyzed.Mechanical properties were evaluated using microhardness test.After 5 passes of MDF,the average grain size was found to be 30±4p m,22±3 pm,and 18±3 pm,in Mg-2%Zn,Mg-4%Zn,and Mg-6%Zn alloys,respectively,with significant improvement in hardness in all cases.Wear resistance was improved after MDF processing,as well as,with increment in Zn content in Mg alloy.However,it decreased when the load and the sliding distance increased.Worn surface exhibited ploughing,delamination,plastic deformation,and wear debris along sliding direction,and abrasive wear was found to be the main mechanism.

Event-Triggered Sliding Mode Control for Trajectory Tracking of Nonlinear Systems

In this paper, an event-triggered sliding mode control approach for trajectory tracking problem of nonlinear input affine system with disturbance has been proposed. A second order robotic manipulator system has been modeled into a general nonlinear input affine system. Initially, the global asymptotic stability is ensured with conventional periodic sampling approach for reference trajectory tracking. Then the proposed approach of event-triggered sliding mode control is discussed which guarantees semi-global uniform ultimate boundedness. The proposed control approach guarantees non-accumulation of control updates ensuring lower bounds on inter-event triggering instants avoiding Zeno behavior in presence of the disturbance. The system shows better performance in terms of reduced control updates, ensures system stability which further guarantees optimization of resource usage and cost. The simulation results are provided for validation of proposed methodology for tracking problem by a robotic manipulator. The number of aperiodic control updates is found to be approximately 44% and 61% in the presence of constant and time-varying disturbances respectively.

Performance characterization of Bi_2O_3/Al nanoenergetics blasted micro-forming system

This paper reports a novel micro-blast driven manufacturing process for micro-forming of Aluminum foils. The micro-blast is realized by using a nanoenergetic material system comprising of Bi_2O_3 microrods and aluminum particles. There is an enhanced need of forming of thin aluminum foil structures in small regions from point of view of drug packaging etc. The process developed caters to this need by using a single shot forming process using a micro-blast source. The micro-blast that is generated from an energetic composite system is made highly tunable by modulating the peak pressure generated through the blasting process and their impact in micro-forming of thin aluminum foils is observed through parametric studies. The engineering challenge involved in these experiments is to tune the blast pressure properties in order to address the forming of thin metal sheets with limiting boundary values as defined by the failure criteria. A variety of characterization techniques related to a thorough analysis of the synthesized material viz. X-ray diffraction(XRD), Scanning Electron Microscopy(SEM) etc, are used to tune the functional properties like gauge blast pressure etc, of material system. We have found a material system that can generate a maximum peak pressure of 73.8 MPa with pressurization rate of 2460 GPas^(-1) and that is able to accomplish micro-forming on thin metal foils(around 0.3 mm thickness). Experimental investigations demonstrate that tunabilty aspect of the energetic composites when exercised can enable variant processes such as embossing, coining, drilling etc. which may be of significant utility to drug packaging industries. A proper mathematical modeling of the forming process and critical process parameters therein have also been detailed.

Dry/wet snow mapping based on the synergistic use of dual polarimetric SAR and multispectral data

We propose a multi-sensor multi-spectral and bi-temporal dual-polarimetric Synthetic Aperture Radar(SAR) data integration scheme for dry/wet snow mapping using Sentinel-2 and Sentinel-1 data which are freely available to the research community. The integration is carried out by incorporating the information retrieved from ratio images of the conventional method for wet snow mapping and the multispectral data in two different frameworks. Firstly, a simple differencing scheme is employed for dry/wet snow mapping, where the snow cover area is derived using the Normalized Differenced Snow Index(NDSI). In the second framework, the ratio images are stacked with the multispectral bands and this stack is used for supervised and unsupervised classification using support vector machines for dry/wet snow mapping. We also investigate the potential of a state of the art backscatter model for the identification of dry/wet snow using Sentinel-1 data. The results are validated using a reference map derived from RADARSAT-2 full polarimetric SAR data. A good agreement was observed between the results and the reference data with an overall accuracy greater than 0.78 for the different blending techniques examined. For all the proposed frameworks, the wet snow was better identified. The coefficient of determination between the snow wetness derived from the backscatter model and the reference based on RADARSAT-2 data was observed to be 0.58 with a significantly higher root mean square error of 1.03 % by volume.

Twin lintel belt in steel for seismic strengthening of brick masonry buildings

A single-room,single-storey full-scale brick masonry building with precast RC roofing system was tested thrice under displacement controlled lateral cyclic loading,to assess the effectiveness of the basic repair and seismic strengthening techniques.Initially,the virgin building specimen was loaded laterally to f^tilure.In the second stage,the damaged building was repaired by stitching across the cracks,and tested under the same lateral loading.In the third stage,the twice-damaged structure was repaired once more by stitching and strengthened by twin lintel belt in steel and vertical comer reinforcement, and re-tested.The building strengthened by twin lintel belt in steel showed about 28% higher strength under lateral loading than the virgin building.

Molecular dynamics simulation of nanometer scale mechanical properties of hexagonal Mgsingle bondLi alloy

Nano mechanical behavior of Mgsingle bondLi nanowire is investigated under tension and compression to elicit property alteration due to Li alloying in Mg within hexagonal range.Embedded atom method(EAM)is employed to carry out present simulation work.Nanowire under consideration is supposed to be isotropic and mechanical behavior is uninfluenced by material texture.The elastic modulus,yield strength both in tension and compression is assessed with change in strain rate.Effects of temperature in tension and compression are studied.Results of present simulation work elicit serrated yielding under uniaxial tension,however,twin mediated deformation under compression is completely tuned with previously reported experimental works.This investigation bridges nanometer scale properties to microscale material response,which in turn can be applied for designing suitable robust processing routes of this material.

Rate-dependent mechanical behavior of jointed rock with an impersistent joint under different infill conditions

Transition in the rate-dependent mechanical response of rock was investigated due to the presence of impersistent joint with different infill conditions.Four types of samples,i.e.intact,jointed with no grouting,jointed and grouted with cement,and jointed and grouted with epoxy,were fabricated using model material.A series of dynamic split Hopkinson pressure bar(SHPB) tests was conducted on prepared samples with strain rates varying between 53-130 salong with static uniaxial compression tests(10s).Progression of fracture/failure along samples was monitored using high-speed imaging and digital image correlation(DIC).Strength was observed to be significantly lower for jointed samples as compared to intact samples.However,the increasing trend of strength with strain rates remained similar for all types of samples.Epoxy was observed to be a better grout due to greater improvement in the strength of epoxy grouted jointed samples than cement grouted samples under both static and dynamic conditions.Significant changes were observed in fracture behavior(initiation,pattern and mechanism)with strain rate for intact and jointed unfilled/grouted samples.Fracturing was dominated by shear and tensile cracks at high strain rates compared to tensile cracks at low strain rates in all samples.Unlike static loading conditions,the location of cracks initiation shifts away from joint tips with increasing strain rate and depending upon existing infill conditions(unfilled/grouted).

State of charge and health estimation of batteries for electric vehicles applications:key issues and challenges

Using electric vehicles(EVs)for transportation is considered as a necessary component for managing sustainable development and environmental issues.The present concerns regarding the environment,such as rapid fossil fuel depletion,increases in air pollution,accelerating energy demands,global warming,and climate change,have paved the way for the electrification of the transport sector.EVs can address all of the aforementioned issues.Portable power supplies have become the lifeline of the EV world,especially lithium-ion(Li-ion)batteries.Li-ion batteries have attracted considerable attention in the EV industry,owing to their high energy density,power density,lifespan,nominal voltage,and cost.One major issue with such batteries concerns providing a quick and accurate estimation of a battery’s state and health;therefore,accurate determinations of the battery’S performance and health,as well as an accurate prediction of its life,are necessary to ensure reliability and efficiency.This study conducts a review of the technological briefs of EVs and their types,as well as the corresponding battery characteristics.Various aspects of recent research and developments in Li-ion battery prognostics and health monitoring are summarized,along with the techniques,algorithms,and models used for current/voltage estimations,state-of-charge(SoC)estimations,capacity estimations,and remaining-useful-life predictions.

Evaluation of mannitol effect in patients with acute hepatic failure and acute-on-chronic liver failure using conventional MRI,diffusion tensor imaging and in-vivo proton MR spectroscopy

AIM： To evaluate the effect of an intravenous bolus of mannitol in altering brain metabolites, brain water content, brain parenchyma volume, cerebrospinal fluid （CSF） volume and clinical signs in controls and in patients with acute liver failure （ALF） and acute- on-chronic liver failure （ACLF）, by comparing changes in conventional magnetic resonance imaging （MRI）, in vivo proton magnetic resonance spectroscopy （PMRS） and diffusion tensor imaging （DTI） before and after its infusion.METHODS： Five patients each with ALF and ACLF in grade 3 or 4 hepatic encephalopathy and with clinical signs of raised intracranial pressure were studied along with five healthy volunteers. After baseline MRI, an intravenous bolus of 20% mannitol solution was given over 10 min in controls as well as in patients with ALF and ACLE Repeat MRI for the same position was acquired 30 rnin after completing the rnannitol injection. RESULTS： No statistically significant difference was observed between controls and patients with ALF and ACLF in metabolite ratios, DTI metrics and brain volume or CSF volume following 45 rain of mannitol infusion. There was no change in clinical status at the end of post-mannitol imaging. CONCLUSION： The osmotic effect of mannitol did not result in significant reduction of brain water content, alteration in metabolite ratios or any change in the clinical status of these patients during or within 45 min of mannitol infusion.

DFT and TD-DFT Study of Bis[2-(5-Amino-[1,3,4]-Oxadiazol-2-yl) Phenol](Diaqua)M(II) Complexes [M = Cu, Ni and Zn]: Electronic Structures, Properties and Analyses

Ground state geometries, spectral (IR and UV-Vis) properties, analysis of frontier molecular orbitals (FMOs), natural bond orbital (NBO) analysis and molecular electrostatic potential (MEP) surfaces of three transition metal complexes [Cu(AOYP)2(OH2)2] (A), [Ni(AOYP)2(OH2)2] (B) and [Zn-(AOYP)2(OH2)2] (C), have been studied theoretically by the Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT) methods. AOYP is the oxadiazole ligand 2-(5-amino-[1,3,4]-oxadiazol-2-yl)phenol. The geometries of these complexes were initially optimized using two basis sets: LAN2DZ and a generic basis set, the latter of which was selected for subsequent analysis. The stability of the complexes arising from intramolecular interactions and electron delocalization was estimated by natural bond orbital (NBO) analysis. The NBO results showed significant charge transfer from lone pair orbitals on the AOYP donor atoms O19, O21, N15 and N36 to central metal ions in the complexes, as well as to the benzene and oxadiazole rings. The electronic spectrum of (A) showed bands at 752 and 550 nm mainly attributable to ligand-to-metal charge transfer (LMCT) transitions, and a band at 446 nm assigned to a d-d transition. The electronic spectrum of (B) consisted of bands at 540, 463 and 395 nm mainly due to d-d transitions. Calculated electronic bands for (C) occurred at 243, 238 and 235 nm, arising from intraligand charge transfer (ILCT) transitions within AOYP. A good agreement in terms of band positions was found between experimental and calculated absorption spectra of the complexes.

Axial Tensile Testing of Single Fibres

The mechanical and damage properties of single fibres used in fibrous composite have gained tremendous importance in recent years. These properties are used in determination of effective properties of composites by micromechanics. These are also used in the micromechanical damage modeling. Further, these properties are used as an indicator of the excellence of product by manufacturers. In the present study the axial tensile modulus, ultimate strength and failure strain of single fibres are determined for carbon and glass fibres. ASTM D3379-75 standard is followed and a number of fibers are tested for statistical analysis. The axial tensile moduli measured are 246.7 GPa and 93.3 GPa, respectively and strength are 3031.6 MPa and 2035.9 MPa, respectively for carbon and glass fibres. Further, the respective axial tensile failure strains are 0.0137 and 0.0224. The error in the measurement of axial modulus is below 8% while for axial tensile strength is below 1%.

A review of challenges and opportunities in micropillar compression studies in Mg alloys

This review paper provides an overview of the micropillar compression technique as applied to magnesium(Mg) and its alloys. It explores the influence of various factors, such as pillar size, shape, temperature, and strain rate on the mechanical properties of Mg.Additionally, the impact of alloying elements, aging, and precipitates in Mg alloys has been extensively examined, revealing their significant influence on mechanical performance. The study highlights the strength and strain hardening improvements in Mg with decreasing pillar size in micropillar compression. Furthermore, the role of precipitates as strengthening agents, affecting deformation mechanisms and overall mechanical response, is explored. These valuable insights are crucial for designing Mg-based materials with enhanced mechanical properties for advanced engineering applications.

A Study on the Far Wake of Elliptic Cylinders

The evolution of far wake of stationary elliptic cylinders with angle of attack is investigated for the unsteady flow at Re=200 using a stabilized finite-element method.The Reynolds number,Re,is based on the major axis of cylinder and free-stream speed.Cylinder aspect ratios,AR considered are 0.2,0.5 and 0.8 while the angle of attack,αvaries from 0° to 90°.With increasingα,the Karman or primary shedding frequency of each cylinder decreases monotonically while the primary wavelength and time-averaged as well as r.m.s.drag increase monotonically.The time-averaged lift and moment coefficients initially increase withαand then decrease.The power spectrum analysis of unsteady transverse velocity signal at various stations along the wake centerline is used to study the associated frequencies.The Karman or primary shedding frequency exists for eachα.For the AR=0.2 cylinder,the secondary and subsequently,low magnitude tertiary frequencies appear in the wake asαcontinues to increase from 30°.In contrast to the decaying nature of primary frequency withα,secondary frequency exhibits a nonmonotonic variation.The secondary frequency in general is not a sub-harmonic of the primary.This suggests that the secondary structures do not form due to merging of primary vortices.With increasingα,the location of formation of secondary structures advances upstream.For a given orientation,the upstream advancement is more dominant with decreasing AR.Power spectrum analysis indicates that the wake state for confined flow is characterized by the primary frequency alone,i.e.the imposition of blockage suppresses the formation of secondary structures.

Local and biglobal linear stability analysis of parallel shear flows

Linear Stability Analysis(LSA)of parallel shear flows,via local and global approaches,is presented.The local analysis is carried out by solving the Orr-Sommerfeld(OS)equation using a spectral-collocation method based on Chebyshev polynomials.A stabilized finite element formulation is employed to carry out the global analysis using the linearized disturbance equations in primitive variables.The local and global analysis are compared.As per the Squires theorem,the two-dimensional disturbance has the largest growth rate.Therefore,only two-dimensional disturbances are considered.By its very nature,the local analysis assumes the disturbance field to be spatially periodic in the streamwise direction.The global analysis permits a more general disturbance.However,to enable a comparison with the local analysis,periodic boundary conditions,at the inlet and exit of the domain,are imposed on the disturbance.Computations are carried out for the LSA of the Plane Poiseuille Flow(PPF).The relationship between the wavenumber,a,of the disturbance and the streamwise extent of the domain,L,in the global analysis is explored for Re=7000.It is found that a and L are related by L=2pn/a,where n is the number of cells of the instability along the streamwise direction within the domain length,L.The procedure to interpret the results from the global analysis,for comparison with local analysis,is described.

ANN Based Performance Analysis of UPFC in Power Flow Control

The Unified Power Flow Controller （UPFC） is one of the most versatile Flexible AC Transmission Systems （FACTS） devices that has unique capability of independently controlling the real and reactive power flows, in addition to regulate the system bus voltage. This paper presents performance analysis of Unified Power Flow Controller based on two axis theory. Based on this analysis, a new Artificial Neural Network （ANN） based controller has been proposed to improve the system performance. The controller rules are structured depending upon the relationship between series inserted voltage and the desired changes in real/reactive power flow in the power system. The effects of different controllers along with parameters of series transformer and transmission line have been investigated through developed control block model in SIMULINK tool box of MATLAB. The effectiveness of the proposed scheme is demonstrated by case studies.