A dynamic database of solid-state electrolyte(DDSE)picturing all-solid-state batteries

All-solid-state batteries(ASSBs)are a class of safer and higher-energy-density materials compared to conventional devices,from which solid-state electrolytes(SSEs)are their essential components.To date,investigations to search for high ion-conducting solid-state electrolytes have attracted broad concern.However,obtaining SSEs with high ionic conductivity is challenging due to the complex structural information and the less-explored structure-performance relationship.To provide a solution to these challenges,developing a database containing typical SSEs from available experimental reports would be a new avenue to understand the structureperformance relationships and find out new design guidelines for reasonable SSEs.Herein,a dynamic experimental database containing>600 materials was developed in a wide range of temperatures(132.40–1261.60 K),including mono-and divalent cations(e.g.,Li^(+),Na^(+),K^(+),Ag^(+),Ca^(2+),Mg^(2+),and Zn^(2+))and various types of anions(e.g.,halide,hydride,sulfide,and oxide).Data-mining was conducted to explore the relationships among different variates(e.g.,transport ion,composition,activation energy,and conductivity).Overall,we expect that this database can provide essential guidelines for the design and development of high-performance SSEs in ASSB applications.This database is dynamically updated,which can be accessed via our open-source online system.

Microstructural analyses of all-solid-state Li–S batteries using LiBH4-based solid electrolyte for prolonged cycle performance

Complex hydride materials have been widely investigated as potential solid electrolytes because they have good compatibility with the lithium metal anodes used in all-solid-state batteries. However, the development of all-solid-state batteries utilizing complex hydrides has been difficult as these cells tend to have short cycle lives. This study investigated the capacity fading mechanism of all-solid-state lithium–sulfur(Li–S) batteries using Li4(BH4)3I solid electrolytes by analyzing the cathode microstructure. Crosssectional scanning electron microscopy observations after 100 discharge–charge cycles revealed crack formation in the Li4(BH4)3I electrolyte and an increased cathode thickness. Raman spectroscopy indicated that decomposition of the Li4(BH4)3I solid electrolyte occurred at a constant rate during the cycling tests.To combat these effects, the cycle life of Li–S batteries was improved by increasing the amount of solid electrolyte in the cathode.

Data-Driven Viewpoint for Developing Next-Generation Mg-Ion Solid-State Electrolytes

Magnesium(Mg)is a promising alternative to lithium(Li)as an anode material in solid-state batteries due to its abundance and high theoretical volumetric capacity.However,the sluggish Mg-ion conduction in the lattice of solidstate electrolytes(SSEs)is one of the key challenges that hamper the development of Mg-ion solid-state batteries.Though various Mg-ion SSEs have been reported in recent years,key insights are hard to be derived from a single literature report.Besides,the structure-performance relationships of Mg-ion SSEs need to be further unraveled to provide a more precise design guideline for SSEs.In this viewpoint article,we analyze the structural characteristics of the Mg-based SSEs with high ionic conductivity reported in the last four decades based upon data mining-we provide big-data-derived insights into the challenges and opportunities in developing next-generation Mg-ion SSEs.

Mineral sulphide-lime reactions and effect of CaO/C mole ratio during carbothermic reduction of complex mineral sulphides

Mineral sulphide （MS）-lime （CaO） ion exchange reactions （MS ＋ CaO = MO ＋ CaS） and the effect of CaO/C mole ratio during carbothermic reduction （MS ＋ CaO ＋ C = M ＋ CaS ＋ CO（g）） were investigated for complex froth flotation mineral sulphide concentrates. Phases in the partially and fully reacted samples were characterised by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The primary phases during mineral sulphide-lime ion exchange reactions are Fe304, CaSO4 Cu2S, and CaS. A complex liquid phase of Ca2CuFeO3S forms during mineral sulphide-lime exchange reactions above 1173 K. The formation mechanisms of Ca2CuFeO3S liquid phase are determined by characterising the partially reacted samples. The reduction rate and extent of mineral sulphides in the presence of CaO and C increase with the increase in CaO/C ratio. The metallic phases are surrounded by the CaS rich phase at CaO/C 〉 1, but the metallic phases and CaS are found as separate phases at CaO/C 〈 1. Experimental results show that the stoichiometric ratio of carbon should be slightly higher than that of CaO. The reactions between CaO and gangue minerals （SiO2 and A1203） are only observed at CaO/C 〉 1 and the reacted samples are excessively sintered.