In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction m...In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.展开更多
Chinese chive is a kind of medicinal and edible plant,with many diseases,and chemical fungicides are usually used for control.In order to find out the risk of pesticide residues in Chinese chives,this paper summarized...Chinese chive is a kind of medicinal and edible plant,with many diseases,and chemical fungicides are usually used for control.In order to find out the risk of pesticide residues in Chinese chives,this paper summarized relevant literatures published in recent years,and sorted out and analyzed the types of pesticides used and detection techniques of common diseases in Chinese chives.展开更多
The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in orde...The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.展开更多
Silicon-based aluminum casting alloys are known to be one of the most widely used alloy systems mainly due to their superior casting characteristics and unique combination of mechanical and physical properties. Howeve...Silicon-based aluminum casting alloys are known to be one of the most widely used alloy systems mainly due to their superior casting characteristics and unique combination of mechanical and physical properties. However,manufacturing of thin-walled aluminum die-casting components,less than 1.0 mm in thickness,is generally known to be very difficult task to achieve aluminum casting alloys with high fluidity.Therefore,in this study,the optimal die-casting conditions for producing 297 mm×210 mm×0.7 mm thin-walled aluminum component was examined experimentally by using 2 different gating systems,tangential and split type,and vent design.Furthermore,computational solidification simulation was also conducted.The results showed that split type gating system was preferable gating design than tangential type gating system at the point of view of soundness of casting and distortion generated after solidification.It was also found that proper vent design was one of the most important factors for producing thin-wall casting components because it was important for the fulfillment of the thin-wall cavity and the minimization of the casting distortion.展开更多
[Objectives] This study was conducted to investigate the feasibility of using modified peanut dietary fiber as a functional food ingredient. [Methods]Using peanut shells as a test material,the process parameters of so...[Objectives] This study was conducted to investigate the feasibility of using modified peanut dietary fiber as a functional food ingredient. [Methods]Using peanut shells as a test material,the process parameters of soluble dietary fiber( SDF) modified by extrusion and expansion were studied,and the functional and structural characteristics of SDF before and after modification were discussed. [Results] The optimum conditions were as follows: screw speed 200 rpm,temperature 130 ℃ and moisture content 20 %,and the SDF extraction yield was 22. 3%. The modified SDF showed BCmax values of( 378. 5 ± 5. 3),( 278. 3 ± 3. 2)and( 167. 2 ± 2. 5) μmol/g and BCmin of( 30. 4 ± 1. 3),( 63. 4 ± 3. 7) and( 71. 3 ± 4. 2) μmol/L,for Pb,As and Cu,respectively,indicating that the adsorption to the three heavy metals was enhanced. The modified SDF had a porous network like honeycomb and swelled structure. [Conclusions]Therefore,it is feasible to modify SDF by extrusion and expansion.展开更多
Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utili...Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.展开更多
High thickness uniformity and large-scale films of α-Ga_(2)O_(3) are crucial factors for the development of power devices.In this work, a high-quality 2-inch α-Ga_(2)O_(3) epitaxial film on c-plane sapphire substrat...High thickness uniformity and large-scale films of α-Ga_(2)O_(3) are crucial factors for the development of power devices.In this work, a high-quality 2-inch α-Ga_(2)O_(3) epitaxial film on c-plane sapphire substrates was prepared by the mist-CVD method.The growth rate and phase control mechanisms were systematically investigated. The growth rate of the α-Ga_(2)O_(3) films was limited by the evaporation of the microdroplets containing gallium acetylacetonate. By adjusting the substrate position(z) from 80 to 50 mm, the growth rate was increased from 307 nm/h to 1.45 μm/h when the growth temperature was fixed at 520 °C.When the growth temperature exceeded 560 °C, ε-Ga_(2)O_(3) was observed to form at the edges of 2-inch sapphire substrate.Phase control was achieved by adjusting the growth temperature. When the growth temperature was 540 °C and the substrate position was 50 mm, the full-width at half maximum(FWHM) of the rocking curves for the(0006) and(10-14) planes were 0.023° and 1.17°. The screw and edge dislocations were 2.3 × 10~6 and 3.9 × 10~(10)cm~(-2), respectively. Furthermore, the bandgaps and optical transmittance of α-Ga_(2)O_(3) films grown under different conditions were characterized utilizing UV-visible and near-IR scanning spectra.展开更多
This paper presents an integration methodology for ma chining and measuring processes using OMM (On-Machine Measurement) technology b ased on CAD/CAM/CAI integration concept. OMM uses a CNC machining center as a me as...This paper presents an integration methodology for ma chining and measuring processes using OMM (On-Machine Measurement) technology b ased on CAD/CAM/CAI integration concept. OMM uses a CNC machining center as a me asuring station by changing the tools into measuring probes such as touch-type, laser and vision. Although the measurement accuracy is not good compared to tha t of the CMM (Coordinate Measuring Machine), there are distinctive advantages us ing OMM in real situation. In this paper, two topics are handled to show the eff ectiveness of the machining and measuring process integration: (1) inspection pl anning strategy for sculptured surface machining and (2) tool path compensation for profile milling process. For the first topic, as a first step, effective mea suring point locations are determined to obtain optimum results for given sampli ng numbers. Two measuring point selection methods are suggested based on the CAD /CAM/CAI integration concept: (1) by the prediction of cutting errors and (2) by considering cutter contact points to avoid the measurement errors caused by cus ps. As a next step, the TSP (Traveling Salesman Problem) algorithm is applied to minimize the probe moving distance. Appropriate simulations and experiments are performed to verify the proposed inspection planning strategy, and the results are analyzed. For the second topic, a methodology for profile milling error comp ensation is presented by using an ANN (Artificial Neural Network) model trained by the inspection database of OMM system. First, geometric and thermal errors of the machining center are compensated using a closed-loop configuration for the improvement of machining and inspection accuracy. The probing errors are also t aken into account. Then, a specimen workpiece is machined and then the machi ning surface error distribution is measured on the machine using touch-type pro be. In order to efficiently analyze the machining errors, two characteristic err or parameters (W err and D err) are defined. Subsequently, these param eters are modeled by applying the RFB (Radial Basis Function) network approach a s an ANN model. Based on the RBF network model, the tool paths are compensated i n order to effectively reduce the errors by employing an iterative algorithm. In order to validate the approaches proposed in this paper, a concrete case of the machining process is taken into account and about 90% of machining error reduction is successfully accomplished through the proposed approaches.展开更多
Pesticide residue detection is an important work to ensure the quality safety of agricultural products.In the process of agricultural production,in order to prevent and control agricultural diseases and pests,a certai...Pesticide residue detection is an important work to ensure the quality safety of agricultural products.In the process of agricultural production,in order to prevent and control agricultural diseases and pests,a certain amount of pesticides need to be used.However,if pesticides are used excessively,there will be certain pesticide residues in crops and related products.Therefore,it is necessary to do a good job in pesticide residue detection.The gas chromatography-mass spectrometry(GC-MS)and liquid chromatography-mass spectrometry(LC-MS)detection methods have good results and can effectively detect pesticide residues in related products.This paper reviewed and analyzed the application of GC-MS and LC-MS in pesticide residue detection,and proposed optimization measures based on practical experience,hoping to provide reference for relevant scholars.展开更多
[Objectives]This study was conducted to understand the status of pesticide residues and dietary intake risk of Chinese chives in Tangshan area. [Methods] Sixty eight kinds of pesticide residues in 415 Chinese chive sa...[Objectives]This study was conducted to understand the status of pesticide residues and dietary intake risk of Chinese chives in Tangshan area. [Methods] Sixty eight kinds of pesticide residues in 415 Chinese chive samples collected from Tangshan area were qualitatively and quantitatively determined by high-performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS) and gas chromatography(GC) in 2020. [Results] The results showed that 41 kinds of pesticide residues were detected in the 415 Chinese chive samples, and the detection rate was 69.4%(288/415), and there was a combination of pesticides in many samples. According to the National Food Safety Standard―Maximum Residue Limits of Pesticides in Food(GB 2763-2019), the residues of 12 pesticides exceeded the maximum residue limits(MRLs), and the unqualified rate was 38.07%(158/415). The highest detection rate of clothianidin was 41.20%(171/415), but there was no MRL in GB 2763-2019. The next was procymidone, the detection rate of which was 35.42%(147/415), and the over-standard rate was 30.12%(125/415). Forbidden and restricted pesticides were detected in some samples. According to the dietary exposure risk assessment, the NEDI/ADI values were all less than 1 and the intake risk was within acceptable range. In Tangshan area, the types of pesticides used in Chinese chive production are complex, and there are risks of multi-residue pollution and use of banned and restricted pesticides and unregistered pesticides. It is suggested that routine monitoring of pesticide residues and management of pesticide use should be strengthened to ensure the quality and safety of agricultural products. [Conclusions] This study provides a theoretical basis for the safe production of Chinese chive and the standardized and rational use of pesticides.展开更多
Low temperature screen plasma technology, a high plasma density, through using a low energy supply, shows excellent effects on a low alloy chromium-molybdenum steel for plastic molds because it does not show a compoun...Low temperature screen plasma technology, a high plasma density, through using a low energy supply, shows excellent effects on a low alloy chromium-molybdenum steel for plastic molds because it does not show a compound layer and a high surface hardness without a deterioration in matrix hardness. For interest about hardening depth, both the screen plasma nitriding and plasma nitro-carburizing processes were tested including nitrogen, hydrogen and a methane mixed gas environmental at 653 K, 713 K. The optical emission spectroscopy (OES) has been analyzed during screen plasma nitriding (SPN) and a nitro-carburizing process (SPNC) was proceeded at 713 K and the same pressure. I find it difficult to dissociate nitrogen molecules perfectly with neutral nitrogen atoms via the DC-plasma nitriding process. Therefore, the SPN and SPNC process have shown a high density of plasma species even though low temperature plasma conditions have a high peak intensity of Hβ and Hγ in the results of the analysis by OES. The hardness value was measured with the micro-Vickers hardness tester after the SPN, SPNC process and the chemical composition of nitriding layers were traced by GDOES. The screen nitriding layer via the screen plasma technology has shown excellent properties with a thickness depth of about 850 ~ 900 HV without the deterioration of matrix hardness value.展开更多
Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of ...Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.展开更多
NH_(3) selective catalytic reduction(SCR) has been widely recognized as a promising technique for reducing nitrogen oxides from diesel vehicle exhausts. High-efficiency SCR catalysts that could perform at low temperat...NH_(3) selective catalytic reduction(SCR) has been widely recognized as a promising technique for reducing nitrogen oxides from diesel vehicle exhausts. High-efficiency SCR catalysts that could perform at low temperatures are essential to denitration. In this work, a series of bimetallic CeCu-SAPO-34 molecular sieves were synthesized by one-step hydrothermal method. The Ce Cu-SAPO-34 maintained good crystallinity and a regular hexahedron appearance of Cu-SAPO-34 after introducing Ce species, while exhibiting a higher specific surface area and pore volume. The as-prepared CeCu-SAPO-34 with 0.02%(mass) Ce constituent exhibited the best catalytic activity below 300℃ and a maximum NO_(x) conversion of 99% was attained;the NO_(x) removal rates of more than 68% and 94% were achieved at 150℃ and 200℃, respectively. And the introduction of cerium species in Cu-SAPO-34 improves the low-temperature hydrothermal stability of the catalyst towards NH_(3)-SCR reaction. Additionally, the introduced Ce species could enhance the formation of abundant weak Br?nsted acid centers and promote the synergistic effect between CuO grains and isolated Cu^(2+) to enhance the redox cycle, which benefit the NH_(3)-SCR reaction.This work provides a facile synthesis method of high-efficiency SCR denitration catalysts towards diesel vehicles exhaust treatment under low temperature.展开更多
Herein,a layer of molybdenum oxide(MoO_(x)),a transition metal oxide(TMO),which has outstanding catalytic properties in combination with a carbonbased thin film,is modified to improve the hydrogen production performan...Herein,a layer of molybdenum oxide(MoO_(x)),a transition metal oxide(TMO),which has outstanding catalytic properties in combination with a carbonbased thin film,is modified to improve the hydrogen production performance and protect the MoO_(x)in acidic media.A thin film of graphene is transferred onto the MoO_(x)layer,after which the graphene structure is doped with N and S atoms at room temperature using a plasma doping method to modify the electronic structure and intrinsic properties of the material.The oxygen functional groups in graphene increase the interfacial interactions and electrical contacts between graphene and MoO_(x).The appearance of surface defects such as oxygen vacancies can result in vacancies in MoO_(x).This improves the electrical conductivity and electrochemically accessible surface area.Increasing the number of defects in graphene by adding dopants can significantly affect the chemical reaction at the interfaces and improve the electrochemical performance.These defects in graphene play a crucial role in the adsorption of H^(+)ions on the graphene surface and their transport to the MoO_(x)layer underneath.This enables MoO_(x)to participate in the reaction with the doped graphene.N^(‐)and S^(‐)doped graphene(NSGr)on MoO_(x)is active in acidic media and performs well in terms of hydrogen production.The initial overpotential value of 359 mV for the current density of−10 mA/cm^(2)is lowered to 228 mV after activation.展开更多
The process parameters of laser additive manufacturing have an important influence on the forming quality of the produced items or parts.In the present work,a finite element model for simulating transient heat transfe...The process parameters of laser additive manufacturing have an important influence on the forming quality of the produced items or parts.In the present work,a finite element model for simulating transient heat transfer in such processes has been implemented using the ANSYS software,and the temperature and stress distributions related to 316L stainless steel thin-walled ring parts have been simulated and analyzed.The effect of the laser power,scanning speed,and scanning mode on temperature distribution,molten pool structure,deformation,and stress field has been studied.The simulation results show that the peak temperature,weld pool size,deformation,and residual stress increase with an increase in laser power and a decrease in the scanning speed.The scanning mode has no obvious effect on temperature distribution,deformation,and residual stress.In addition,a forming experiment was carried out.The experimental results show that the samples prepared by laser power P=800 W,V=6 mm/s,and the normal scanning method display good quality,whereas the samples prepared under other parameters have obvious defects.The experimental findings are consistent with the simulation results.展开更多
Microstructural evolution and strengthening mechanisms of Mg-3Sn-1Ca based alloys with additions of different amounts of Al N nanoparticles were investigated.It was found that with increasing the amount of AlN nano-pa...Microstructural evolution and strengthening mechanisms of Mg-3Sn-1Ca based alloys with additions of different amounts of Al N nanoparticles were investigated.It was found that with increasing the amount of AlN nano-particles the grain size decreases obviously.The existence of AlN nano-particles could refine the primary crystal phases CaMgSn,which provided more heterogeneous nucleation sites for the formation of magnesium.Moreover,such nano-particles could also restrict the grain growth during solidification.After adding AlN nano-particles,both the tensile properties at room temperature and high temperature 250℃and the hardness are largely improved.The improvement of strength is attributed to grain refinement and second phase refinement.展开更多
[Objectives]This study was conducted to understand the effects of microbial inocula on the biological yield and nutritional components of corn.[Methods]Silage corn varieties suitable for planting in Hebei Province wer...[Objectives]This study was conducted to understand the effects of microbial inocula on the biological yield and nutritional components of corn.[Methods]Silage corn varieties suitable for planting in Hebei Province were selected,and set with an experimental group and a control check group each.Meanwhile,at the late stage of milk ripening of silage corn growth cycle,the nutritional components and indexes of silage corn were determined and analyzed by a near-infrared analyzer and the NIRS technique.Meanwhile,the biological yield of silage corn was determined at the maturation stage of its growth period,aiming at comprehensively evaluating the regulation effects of the microbial inoculum tested on silage corn from the aspects of basic nutritional components,mineral element contents,energy and related indexes of corn,combined with agronomic characters and biological yield.[Results]The microbial inoculum improved the biological yield and nutritional indexes of silage corn,and had a positive regulation effect on the growth of silage corn.[Conclusions]The results of this study provide a theoretical basis for popularizing the planting methods and cultivation methods of silage corn with high yield and high quality.展开更多
In this paper, the zero voltage switching (ZVS) region of a dual active bridge (DAB) converter with wide band-gap (WBG) power semiconductor device is analyzed. The ZVS region of a DAB converter varies depending on out...In this paper, the zero voltage switching (ZVS) region of a dual active bridge (DAB) converter with wide band-gap (WBG) power semiconductor device is analyzed. The ZVS region of a DAB converter varies depending on output power and voltage ratio. The DAB converters operate with hard switching at light loads, it is difficult to achieve high efficiency. Fortunately, WBG power semiconductor devices have excellent hard switching characteristics and can increase efficiency compared to silicon (Si) devices. In particular, WBG devices can achieve ZVS at low load currents due to their low parasitic output capacitance (C<sub>o,tr</sub>) characteristics. Therefore, in this paper, the ZVS operating resion is analyzed based on the characteristics of Si, silicon carbide (SiC) and gallium nitride (GaN). Power semiconductor devices. WBG devices with low C<sub>o,tr</sub> operate at ZVS at lower load currents compared to Si devices. To verify this, experiments are conducted and the results are analyzed using a 3 kW DAB converter. For Si devices, ZVS is achieved above 1.4 kW. For WBG devices, ZVS is achieved at 700 W. Due to the ZVS conditions depending on the switching device, the DAB converter using Si devices achieves a power conversion efficiency of 91% at 1.1 kW output. On the other hand, in the case of WBG devices, power conversion efficiency of more than 98% is achieved under 11 kW conditions. In conclusion, it is confirmed that the WBG device operates in ZVS at a lower load compared to the Si device, which is advantageous in increasing light load efficiency.展开更多
In recent years,the problem of pesticide residues in Chinese chives has attracted widespread attention from society.This paper comprehensively analyzed the production and planting situation,quality and safety status a...In recent years,the problem of pesticide residues in Chinese chives has attracted widespread attention from society.This paper comprehensively analyzed the production and planting situation,quality and safety status and changes in pesticide standards of Chinese chives,and deeply discussed the main quality and safety problems of Chinese chives and their causes.On this basis,it was proposed to improve the quality and safety level of Chinese chives from three aspects:improving limit standards,promoting green production prevention and control techniques,and strengthening supervision on input products.展开更多
The prediction of suitable area is a method for predicting the potential distribution by using the maximum entropy model.This study predicted the potential suitable habitats for the genus Cricotopus of Chironomidae in...The prediction of suitable area is a method for predicting the potential distribution by using the maximum entropy model.This study predicted the potential suitable habitats for the genus Cricotopus of Chironomidae in China.The latitude and longitude information of 98 distribution sites of Cricotopus in China and the biological environmental factors and altitude distribution in China were collected,and suitable habitats for Cricotopus were predicted,obtaining the suitable ranges and areas of Cricotopus in China,which is consistent with the known living conditions of Cricotopus.The study on the diversity of Cricotopus and the prediction of its suitable habitats provide a theoretical basis for Cricotopus in water monitoring and paddy fields,as well as basic data for the study on the genus Cricotopus.展开更多
基金supported by the Qingdao Postdoctoral Program Funding(QDBSH20220202045)Shandong provincial Natural Science Foundation(ZR2021ME049,ZR2022ME176)+1 种基金National Natural Science Foundation of China(22078176)Taishan Industrial Experts Program(TSCX202306135).
文摘In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.
基金Supported by Special Project of the Central Government in Guidance of Local Science and Technology Development (Scientific and Technological Innovation Base Project) (226Z5504G)The Fourth Batch of High-end Talent Project in Hebei Province.
文摘Chinese chive is a kind of medicinal and edible plant,with many diseases,and chemical fungicides are usually used for control.In order to find out the risk of pesticide residues in Chinese chives,this paper summarized relevant literatures published in recent years,and sorted out and analyzed the types of pesticides used and detection techniques of common diseases in Chinese chives.
基金supported by the Learning & Academic Research Institution for Master’s and Ph.D. Students and Postdocs (LAMP) Program of the National Research Foundation of Korea (NRF) grant funded by the Ministry of Education (No. RS-2023-00285353)supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIP) (NRF-2021R1A2C3006662, NRF-2022R1A5A1030054, and 2021R1A2C1091301)+3 种基金the support from Natural Sciences and Engineering Research Council of Canada (NSERC)Canada Foundation for Innovation (CFI)Atlantic Canada Opportunities Agency (ACOA)the New Brunswick Innovation Foundation (NBIF)
文摘The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.
基金Acknowledgement This work was supported by Korea Institute of Industrial Technology and Gwangju Metropolitan City through "The Advanced Materials and Components Industry Development Program".
文摘Silicon-based aluminum casting alloys are known to be one of the most widely used alloy systems mainly due to their superior casting characteristics and unique combination of mechanical and physical properties. However,manufacturing of thin-walled aluminum die-casting components,less than 1.0 mm in thickness,is generally known to be very difficult task to achieve aluminum casting alloys with high fluidity.Therefore,in this study,the optimal die-casting conditions for producing 297 mm×210 mm×0.7 mm thin-walled aluminum component was examined experimentally by using 2 different gating systems,tangential and split type,and vent design.Furthermore,computational solidification simulation was also conducted.The results showed that split type gating system was preferable gating design than tangential type gating system at the point of view of soundness of casting and distortion generated after solidification.It was also found that proper vent design was one of the most important factors for producing thin-wall casting components because it was important for the fulfillment of the thin-wall cavity and the minimization of the casting distortion.
基金Supported by The High-level Talents Program of Hebei Province (A20190-1128)Tangshan Science and Technology Planning Project (19150204E)。
文摘[Objectives] This study was conducted to investigate the feasibility of using modified peanut dietary fiber as a functional food ingredient. [Methods]Using peanut shells as a test material,the process parameters of soluble dietary fiber( SDF) modified by extrusion and expansion were studied,and the functional and structural characteristics of SDF before and after modification were discussed. [Results] The optimum conditions were as follows: screw speed 200 rpm,temperature 130 ℃ and moisture content 20 %,and the SDF extraction yield was 22. 3%. The modified SDF showed BCmax values of( 378. 5 ± 5. 3),( 278. 3 ± 3. 2)and( 167. 2 ± 2. 5) μmol/g and BCmin of( 30. 4 ± 1. 3),( 63. 4 ± 3. 7) and( 71. 3 ± 4. 2) μmol/L,for Pb,As and Cu,respectively,indicating that the adsorption to the three heavy metals was enhanced. The modified SDF had a porous network like honeycomb and swelled structure. [Conclusions]Therefore,it is feasible to modify SDF by extrusion and expansion.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022R1F1A1070168,2020R1C1C1004322)the Korea Institute of Industrial Technology as Development of core technology for smart wellness care based on cleaner production process technology(KITECH-PEH23030)+1 种基金supported by the Renewable Surplus Sector Coupling Technology Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)granted financial resource from the Ministry of Trade,Industry&Energy,Republic of Korea(No.20226210100050)the National Research Council of Science&Technology(NST)grant by the Korea government(MSIT)(No.CPS21141-100)。
文摘Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.
基金National Natural Science Foundation of China (Grant Nos. 52002219, 51932004 and 61975098)Key-Area Research and Development Program of Guangdong Province (Grant No. 2020B010174002)+2 种基金Shenzhen Fundamental Research Program (Grant No. JCYJ20210324132014038)Natural Science Foundation of Shandong (Grant No. ZR202105230005)the 111 Project 2.0 (Grant No. BP2018013)。
文摘High thickness uniformity and large-scale films of α-Ga_(2)O_(3) are crucial factors for the development of power devices.In this work, a high-quality 2-inch α-Ga_(2)O_(3) epitaxial film on c-plane sapphire substrates was prepared by the mist-CVD method.The growth rate and phase control mechanisms were systematically investigated. The growth rate of the α-Ga_(2)O_(3) films was limited by the evaporation of the microdroplets containing gallium acetylacetonate. By adjusting the substrate position(z) from 80 to 50 mm, the growth rate was increased from 307 nm/h to 1.45 μm/h when the growth temperature was fixed at 520 °C.When the growth temperature exceeded 560 °C, ε-Ga_(2)O_(3) was observed to form at the edges of 2-inch sapphire substrate.Phase control was achieved by adjusting the growth temperature. When the growth temperature was 540 °C and the substrate position was 50 mm, the full-width at half maximum(FWHM) of the rocking curves for the(0006) and(10-14) planes were 0.023° and 1.17°. The screw and edge dislocations were 2.3 × 10~6 and 3.9 × 10~(10)cm~(-2), respectively. Furthermore, the bandgaps and optical transmittance of α-Ga_(2)O_(3) films grown under different conditions were characterized utilizing UV-visible and near-IR scanning spectra.
文摘This paper presents an integration methodology for ma chining and measuring processes using OMM (On-Machine Measurement) technology b ased on CAD/CAM/CAI integration concept. OMM uses a CNC machining center as a me asuring station by changing the tools into measuring probes such as touch-type, laser and vision. Although the measurement accuracy is not good compared to tha t of the CMM (Coordinate Measuring Machine), there are distinctive advantages us ing OMM in real situation. In this paper, two topics are handled to show the eff ectiveness of the machining and measuring process integration: (1) inspection pl anning strategy for sculptured surface machining and (2) tool path compensation for profile milling process. For the first topic, as a first step, effective mea suring point locations are determined to obtain optimum results for given sampli ng numbers. Two measuring point selection methods are suggested based on the CAD /CAM/CAI integration concept: (1) by the prediction of cutting errors and (2) by considering cutter contact points to avoid the measurement errors caused by cus ps. As a next step, the TSP (Traveling Salesman Problem) algorithm is applied to minimize the probe moving distance. Appropriate simulations and experiments are performed to verify the proposed inspection planning strategy, and the results are analyzed. For the second topic, a methodology for profile milling error comp ensation is presented by using an ANN (Artificial Neural Network) model trained by the inspection database of OMM system. First, geometric and thermal errors of the machining center are compensated using a closed-loop configuration for the improvement of machining and inspection accuracy. The probing errors are also t aken into account. Then, a specimen workpiece is machined and then the machi ning surface error distribution is measured on the machine using touch-type pro be. In order to efficiently analyze the machining errors, two characteristic err or parameters (W err and D err) are defined. Subsequently, these param eters are modeled by applying the RFB (Radial Basis Function) network approach a s an ANN model. Based on the RBF network model, the tool paths are compensated i n order to effectively reduce the errors by employing an iterative algorithm. In order to validate the approaches proposed in this paper, a concrete case of the machining process is taken into account and about 90% of machining error reduction is successfully accomplished through the proposed approaches.
基金Supported by The Fourth Batch of High-end Talent Project in Hebei ProvinceTangshan Science and Technology Entrepreneurship and Innovation Leading Talent Project(21130243A)+1 种基金Special Project of the Central Government in Guidance of Local Science and Technology Development(226Z5504G)Tangshan Talent Project(A202202005).
文摘Pesticide residue detection is an important work to ensure the quality safety of agricultural products.In the process of agricultural production,in order to prevent and control agricultural diseases and pests,a certain amount of pesticides need to be used.However,if pesticides are used excessively,there will be certain pesticide residues in crops and related products.Therefore,it is necessary to do a good job in pesticide residue detection.The gas chromatography-mass spectrometry(GC-MS)and liquid chromatography-mass spectrometry(LC-MS)detection methods have good results and can effectively detect pesticide residues in related products.This paper reviewed and analyzed the application of GC-MS and LC-MS in pesticide residue detection,and proposed optimization measures based on practical experience,hoping to provide reference for relevant scholars.
基金Supported by The Fourth Batch of High-end Talent Project in Hebei ProvinceTangshan Science and Technology Entrepreneurship and Innovation Leading Talent ProjectFund for the Central Government to Guide Local Scientific and Technological Development (226Z5504G)。
文摘[Objectives]This study was conducted to understand the status of pesticide residues and dietary intake risk of Chinese chives in Tangshan area. [Methods] Sixty eight kinds of pesticide residues in 415 Chinese chive samples collected from Tangshan area were qualitatively and quantitatively determined by high-performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS) and gas chromatography(GC) in 2020. [Results] The results showed that 41 kinds of pesticide residues were detected in the 415 Chinese chive samples, and the detection rate was 69.4%(288/415), and there was a combination of pesticides in many samples. According to the National Food Safety Standard―Maximum Residue Limits of Pesticides in Food(GB 2763-2019), the residues of 12 pesticides exceeded the maximum residue limits(MRLs), and the unqualified rate was 38.07%(158/415). The highest detection rate of clothianidin was 41.20%(171/415), but there was no MRL in GB 2763-2019. The next was procymidone, the detection rate of which was 35.42%(147/415), and the over-standard rate was 30.12%(125/415). Forbidden and restricted pesticides were detected in some samples. According to the dietary exposure risk assessment, the NEDI/ADI values were all less than 1 and the intake risk was within acceptable range. In Tangshan area, the types of pesticides used in Chinese chive production are complex, and there are risks of multi-residue pollution and use of banned and restricted pesticides and unregistered pesticides. It is suggested that routine monitoring of pesticide residues and management of pesticide use should be strengthened to ensure the quality and safety of agricultural products. [Conclusions] This study provides a theoretical basis for the safe production of Chinese chive and the standardized and rational use of pesticides.
文摘Low temperature screen plasma technology, a high plasma density, through using a low energy supply, shows excellent effects on a low alloy chromium-molybdenum steel for plastic molds because it does not show a compound layer and a high surface hardness without a deterioration in matrix hardness. For interest about hardening depth, both the screen plasma nitriding and plasma nitro-carburizing processes were tested including nitrogen, hydrogen and a methane mixed gas environmental at 653 K, 713 K. The optical emission spectroscopy (OES) has been analyzed during screen plasma nitriding (SPN) and a nitro-carburizing process (SPNC) was proceeded at 713 K and the same pressure. I find it difficult to dissociate nitrogen molecules perfectly with neutral nitrogen atoms via the DC-plasma nitriding process. Therefore, the SPN and SPNC process have shown a high density of plasma species even though low temperature plasma conditions have a high peak intensity of Hβ and Hγ in the results of the analysis by OES. The hardness value was measured with the micro-Vickers hardness tester after the SPN, SPNC process and the chemical composition of nitriding layers were traced by GDOES. The screen nitriding layer via the screen plasma technology has shown excellent properties with a thickness depth of about 850 ~ 900 HV without the deterioration of matrix hardness value.
基金Financial support from the Science Fund for Creative Research Groups of the National Science Foundation of China (22021005)the National Natural Science Foundation of China (21776032)the Innovation Team of Dalian University of Technology (DUT2017TB01)。
文摘Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.
基金supported by Project of Central Government for Local Science and Technology Development of China (2022JH6/100100050)the National Natural Science Foundation of China (21776028)Liaoning Key Laboratory of Chemical Additive Synthesis and Separation (ZJKF2001)。
文摘NH_(3) selective catalytic reduction(SCR) has been widely recognized as a promising technique for reducing nitrogen oxides from diesel vehicle exhausts. High-efficiency SCR catalysts that could perform at low temperatures are essential to denitration. In this work, a series of bimetallic CeCu-SAPO-34 molecular sieves were synthesized by one-step hydrothermal method. The Ce Cu-SAPO-34 maintained good crystallinity and a regular hexahedron appearance of Cu-SAPO-34 after introducing Ce species, while exhibiting a higher specific surface area and pore volume. The as-prepared CeCu-SAPO-34 with 0.02%(mass) Ce constituent exhibited the best catalytic activity below 300℃ and a maximum NO_(x) conversion of 99% was attained;the NO_(x) removal rates of more than 68% and 94% were achieved at 150℃ and 200℃, respectively. And the introduction of cerium species in Cu-SAPO-34 improves the low-temperature hydrothermal stability of the catalyst towards NH_(3)-SCR reaction. Additionally, the introduced Ce species could enhance the formation of abundant weak Br?nsted acid centers and promote the synergistic effect between CuO grains and isolated Cu^(2+) to enhance the redox cycle, which benefit the NH_(3)-SCR reaction.This work provides a facile synthesis method of high-efficiency SCR denitration catalysts towards diesel vehicles exhaust treatment under low temperature.
基金Korea Institute of Industrial Technology,Grant/Award Number:KITECH EO‐22‐0005National Research Foundation of Korea,Grant/Award Numbers:2022R1A3B1078163,2022R1A4A1031182,2022R1A2C2005701。
文摘Herein,a layer of molybdenum oxide(MoO_(x)),a transition metal oxide(TMO),which has outstanding catalytic properties in combination with a carbonbased thin film,is modified to improve the hydrogen production performance and protect the MoO_(x)in acidic media.A thin film of graphene is transferred onto the MoO_(x)layer,after which the graphene structure is doped with N and S atoms at room temperature using a plasma doping method to modify the electronic structure and intrinsic properties of the material.The oxygen functional groups in graphene increase the interfacial interactions and electrical contacts between graphene and MoO_(x).The appearance of surface defects such as oxygen vacancies can result in vacancies in MoO_(x).This improves the electrical conductivity and electrochemically accessible surface area.Increasing the number of defects in graphene by adding dopants can significantly affect the chemical reaction at the interfaces and improve the electrochemical performance.These defects in graphene play a crucial role in the adsorption of H^(+)ions on the graphene surface and their transport to the MoO_(x)layer underneath.This enables MoO_(x)to participate in the reaction with the doped graphene.N^(‐)and S^(‐)doped graphene(NSGr)on MoO_(x)is active in acidic media and performs well in terms of hydrogen production.The initial overpotential value of 359 mV for the current density of−10 mA/cm^(2)is lowered to 228 mV after activation.
基金funded by the National Natural Science Foundation of China(Grant Nos.51975339,51605262)China Postdoctoral Science Foundation(Grant Nos.2019T120602,2017M610439)Youth Innovation and Technology Support Program for University in Shandong Province(Grant No.2019KJB003).
文摘The process parameters of laser additive manufacturing have an important influence on the forming quality of the produced items or parts.In the present work,a finite element model for simulating transient heat transfer in such processes has been implemented using the ANSYS software,and the temperature and stress distributions related to 316L stainless steel thin-walled ring parts have been simulated and analyzed.The effect of the laser power,scanning speed,and scanning mode on temperature distribution,molten pool structure,deformation,and stress field has been studied.The simulation results show that the peak temperature,weld pool size,deformation,and residual stress increase with an increase in laser power and a decrease in the scanning speed.The scanning mode has no obvious effect on temperature distribution,deformation,and residual stress.In addition,a forming experiment was carried out.The experimental results show that the samples prepared by laser power P=800 W,V=6 mm/s,and the normal scanning method display good quality,whereas the samples prepared under other parameters have obvious defects.The experimental findings are consistent with the simulation results.
基金financially supported by the Study Abroad Program by the Government of Shandong Province(201802005)Linyi Industrial Technology Research Institute and Shandong Yinguang Yuyuan Light Metal Precise Forming Co.,Ltd。
文摘Microstructural evolution and strengthening mechanisms of Mg-3Sn-1Ca based alloys with additions of different amounts of Al N nanoparticles were investigated.It was found that with increasing the amount of AlN nano-particles the grain size decreases obviously.The existence of AlN nano-particles could refine the primary crystal phases CaMgSn,which provided more heterogeneous nucleation sites for the formation of magnesium.Moreover,such nano-particles could also restrict the grain growth during solidification.After adding AlN nano-particles,both the tensile properties at room temperature and high temperature 250℃and the hardness are largely improved.The improvement of strength is attributed to grain refinement and second phase refinement.
基金Supported by Fund Project for Transformation of Agricultural Scientific and Technological Achievements in Hebei Province in 2022Agricultural Products Quality and Safety Technology Innovation Center of Hebei Province+2 种基金Tangshan Talent Project(A202110026)Tangshan Science and Technology Planning Project(23150210A)High-level Talent Fund of Hebei Province(C20231087).
文摘[Objectives]This study was conducted to understand the effects of microbial inocula on the biological yield and nutritional components of corn.[Methods]Silage corn varieties suitable for planting in Hebei Province were selected,and set with an experimental group and a control check group each.Meanwhile,at the late stage of milk ripening of silage corn growth cycle,the nutritional components and indexes of silage corn were determined and analyzed by a near-infrared analyzer and the NIRS technique.Meanwhile,the biological yield of silage corn was determined at the maturation stage of its growth period,aiming at comprehensively evaluating the regulation effects of the microbial inoculum tested on silage corn from the aspects of basic nutritional components,mineral element contents,energy and related indexes of corn,combined with agronomic characters and biological yield.[Results]The microbial inoculum improved the biological yield and nutritional indexes of silage corn,and had a positive regulation effect on the growth of silage corn.[Conclusions]The results of this study provide a theoretical basis for popularizing the planting methods and cultivation methods of silage corn with high yield and high quality.
文摘In this paper, the zero voltage switching (ZVS) region of a dual active bridge (DAB) converter with wide band-gap (WBG) power semiconductor device is analyzed. The ZVS region of a DAB converter varies depending on output power and voltage ratio. The DAB converters operate with hard switching at light loads, it is difficult to achieve high efficiency. Fortunately, WBG power semiconductor devices have excellent hard switching characteristics and can increase efficiency compared to silicon (Si) devices. In particular, WBG devices can achieve ZVS at low load currents due to their low parasitic output capacitance (C<sub>o,tr</sub>) characteristics. Therefore, in this paper, the ZVS operating resion is analyzed based on the characteristics of Si, silicon carbide (SiC) and gallium nitride (GaN). Power semiconductor devices. WBG devices with low C<sub>o,tr</sub> operate at ZVS at lower load currents compared to Si devices. To verify this, experiments are conducted and the results are analyzed using a 3 kW DAB converter. For Si devices, ZVS is achieved above 1.4 kW. For WBG devices, ZVS is achieved at 700 W. Due to the ZVS conditions depending on the switching device, the DAB converter using Si devices achieves a power conversion efficiency of 91% at 1.1 kW output. On the other hand, in the case of WBG devices, power conversion efficiency of more than 98% is achieved under 11 kW conditions. In conclusion, it is confirmed that the WBG device operates in ZVS at a lower load compared to the Si device, which is advantageous in increasing light load efficiency.
基金Supported by The Fourth Batch of High-end Talent Project in Hebei ProvinceHebei Provincial Science and Technology Innovation Leading Talents(21130243A)+1 种基金Special Project of the Central Government in Guidance of Local Science and Technology Development(226Z5504G)Tangshan Talent Project(A202202005).
文摘In recent years,the problem of pesticide residues in Chinese chives has attracted widespread attention from society.This paper comprehensively analyzed the production and planting situation,quality and safety status and changes in pesticide standards of Chinese chives,and deeply discussed the main quality and safety problems of Chinese chives and their causes.On this basis,it was proposed to improve the quality and safety level of Chinese chives from three aspects:improving limit standards,promoting green production prevention and control techniques,and strengthening supervision on input products.
基金Supported by the National Natural Science Foundation of China(NSFC)(32070483).
文摘The prediction of suitable area is a method for predicting the potential distribution by using the maximum entropy model.This study predicted the potential suitable habitats for the genus Cricotopus of Chironomidae in China.The latitude and longitude information of 98 distribution sites of Cricotopus in China and the biological environmental factors and altitude distribution in China were collected,and suitable habitats for Cricotopus were predicted,obtaining the suitable ranges and areas of Cricotopus in China,which is consistent with the known living conditions of Cricotopus.The study on the diversity of Cricotopus and the prediction of its suitable habitats provide a theoretical basis for Cricotopus in water monitoring and paddy fields,as well as basic data for the study on the genus Cricotopus.