Dynamic property tests of frozen red sandstone using a split hopkinson pressure bar

In this study, frozen red sandstone specimens were impacted by a Split Hopkinson bar (SHPB), with a velocity of 4.558 ~ 6.823 ms-1. The temperature of the specimens was maintained at -15℃ during the experiment. For comparison purposes, static uniaxial compression tests were conducted in advance using a freezing triaxial test machine. Four stress-strain curves were obtained in diff erent average strain rates. The test results suggested that when the average strain rate is low, the specimen strength changes gradually;but when it is high, its strength changes rapidly. When the average strain rate is 120.73 s-1, the peak value of stress is as high as 82.96 MPa, which is about two times that of the static compressive strength of 44.1 MPa. A constitutive model was established that was composed of the damaged, viscoelastic and spring bodies, and revealed the variations of compressive strength and strain for the frozen red sandstone under diff erent high strain rates. The test results also showed that the failure form was correlated to the average strain rate of the frozen red sandstone. When the average strain rate is low, the damage was only distributed on the specimen’s edges. However, as the average strain rate increases, the damage range extended to the central parts of the specimen. When the average strain rate reached 107.34s-1, the specimen was smashed.

Longwall mining “cutting cantilever beam theory” and 110 mining method in China——The third mining science innovation

With the third innovation in science and technology worldwide, China has also experienced thismarvelous progress. Concerning the longwall mining in China, the ＂masonry beam theory＂ （MBT） wasfirst proposed in the 1960s, illustrating that the transmission and equilibrium method of overburdenpressure using reserved coal pillar in mined-out areas can be realized. This forms the so-called ＂121mining method＂, which lays a solid foundation for development of mining science and technology inChina. The ＂transfer rock beam theory＂ （TRBT） proposed in the 1980s gives a further understanding forthe transmission path of stope overburden pressure and pressure distribution in high-stress areas. In thisregard, the advanced 121 mining method was proposed with smaller coal pillar for excavation design,making significant contributions to improvement of the coal recovery rate in that era. In the 21st century,the traditional mining technologies faced great challenges and, under the theoretical developmentspioneered by Profs. Minggao Qian and Zhenqi Song, the ＂cutting cantilever beam theory＂ （CCBT） wasproposed in 2008. After that the 110 mining method is formulated subsequently, namely one stope face,after the first mining cycle, needs one advanced gateway excavation, while the other one is automaticallyformed during the last mining cycle without coal pillars left in the mining area. This method can beimplemented using the CCBT by incorporating the key technologies, including the directional presplittingroof cutting, constant resistance and large deformation （CRLD） bolt/anchor supporting systemwith negative Poisson＇s ratio （NPR） effect material, and remote real-time monitoring technology. TheCCBT and 110 mining method will provide the theoretical and technical basis for the development ofmining industry in China.