Nano-crystalline pre-alloyed powders of W-Ni-Fe were fabricated by high energy ball milling mechanical alloying (MA) technique. The change of appearances and the crystallite sizes of powders before and after high ener...Nano-crystalline pre-alloyed powders of W-Ni-Fe were fabricated by high energy ball milling mechanical alloying (MA) technique. The change of appearances and the crystallite sizes of powders before and after high energy ball milling were investigated by XRD, TOPAS P software, SEM and EDS. The results show that the nano-crystalline pre-alloyed powders can be fabricated by 5 h high energy ball milling. During the MA process, the diffusion of W, Ni and Fe happens in the process of repeated welding and fracturing. As a result, nano-crystalline supersaturated solid solutions are formed. The crystallite sizes won't be refined after 10 h ball milling. The crystallite sizes of different compositions are almost the same under the same MA condition. Due to the toughening mechanism of rare earth element, the powders of 90W-4Ni-2Fe-3.8Mo-0.2RE alloy are seriously agglomerated after ball milling compared with the other alloys. It can be concluded that the optimal sintering temperature of 90W-4Ni-2Fe-3.8Mo-0.2RE pre-alloyed powders after 15 h mechanical alloying is 1 300-1 350 ℃.展开更多
Saturated vapor pressure, critical evaporation temperature and evaporation loss rate of Fe-Ga alloy were calculated under different conditions of Ga and Fe contents with activity coefficients. The relationship between...Saturated vapor pressure, critical evaporation temperature and evaporation loss rate of Fe-Ga alloy were calculated under different conditions of Ga and Fe contents with activity coefficients. The relationship between the change of Ga content and melting time was determined. The results demonstrated that saturated vapor pressure of Ga was higher than that of Fe under the same conditions. The difference value of critical evaporation temperature of Ga with and without Ar was nearly 800 K. The critical evaporation temperature of Fe was higher than that of Ga under vacuum, indicating that Ga was more volatile than Fe. At 1800 K, the evaporation rate of Ga was 84 times higher than that of Fe in the melt of Fe81Ga19 alloy. Under this condition, the change of Ga content and smelting time kept a linear relationship. The higher the temperature was, the faster the Ga content decreased, which was consistent with theoretical calculations.展开更多
基金Project(2006259) supported by the Education Science Foundation of Jiangxi Provincial Education DepartmentProject(2007gqc1562) supported by the Natural Science Foundation of Jiangxi Province, China
文摘Nano-crystalline pre-alloyed powders of W-Ni-Fe were fabricated by high energy ball milling mechanical alloying (MA) technique. The change of appearances and the crystallite sizes of powders before and after high energy ball milling were investigated by XRD, TOPAS P software, SEM and EDS. The results show that the nano-crystalline pre-alloyed powders can be fabricated by 5 h high energy ball milling. During the MA process, the diffusion of W, Ni and Fe happens in the process of repeated welding and fracturing. As a result, nano-crystalline supersaturated solid solutions are formed. The crystallite sizes won't be refined after 10 h ball milling. The crystallite sizes of different compositions are almost the same under the same MA condition. Due to the toughening mechanism of rare earth element, the powders of 90W-4Ni-2Fe-3.8Mo-0.2RE alloy are seriously agglomerated after ball milling compared with the other alloys. It can be concluded that the optimal sintering temperature of 90W-4Ni-2Fe-3.8Mo-0.2RE pre-alloyed powders after 15 h mechanical alloying is 1 300-1 350 ℃.
基金Item Sponsored by National Natural Science Foundation of China(51161019)Project of Department of Science and Technology of Jiangxi Province of China(20133BBE50011)Project of Department of Science & Technology of Jiangxi Province of China(20141BDH80025)
文摘Saturated vapor pressure, critical evaporation temperature and evaporation loss rate of Fe-Ga alloy were calculated under different conditions of Ga and Fe contents with activity coefficients. The relationship between the change of Ga content and melting time was determined. The results demonstrated that saturated vapor pressure of Ga was higher than that of Fe under the same conditions. The difference value of critical evaporation temperature of Ga with and without Ar was nearly 800 K. The critical evaporation temperature of Fe was higher than that of Ga under vacuum, indicating that Ga was more volatile than Fe. At 1800 K, the evaporation rate of Ga was 84 times higher than that of Fe in the melt of Fe81Ga19 alloy. Under this condition, the change of Ga content and smelting time kept a linear relationship. The higher the temperature was, the faster the Ga content decreased, which was consistent with theoretical calculations.