Advanced Machine Learning Methods for Prediction of Blast-Induced Flyrock Using Hybrid SVR Methods

Blasting in surface mines aims to fragment rock masses to a proper size.However,flyrock is an undesirable effect of blasting that can result in human injuries.In this study,support vector regression(SVR)is combined with four algorithms:gravitational search algorithm(GSA),biogeography-based optimization(BBO),ant colony optimization(ACO),and whale optimization algorithm(WOA)for predicting flyrock in two surface mines in Iran.Additionally,three other methods,including artificial neural network(ANN),kernel extreme learning machine(KELM),and general regression neural network(GRNN),are employed,and their performances are compared to those of four hybrid SVR models.After modeling,the measured and predicted flyrock values are validated with some performance indices,such as root mean squared error(RMSE).The results revealed that the SVR-WOA model has the most optimal accuracy,with an RMSE of 7.218,while the RMSEs of the KELM,GRNN,SVR-GSA,ANN,SVR-BBO,and SVR-ACO models are 10.668,10.867,15.305,15.661,16.239,and 18.228,respectively.Therefore,combining WOA and SVR can be a valuable tool for accurately predicting flyrock distance in surface mines.

Evaluation of deep learning algorithms for national scale landslide susceptibility mapping of Iran

The identification of landslide-prone areas is an essential step in landslide hazard assessment and mitigation of landslide-related losses.In this study,we applied two novel deep learning algorithms,the recurrent neural network(RNN)and convolutional neural network(CNN),for national-scale landslide susceptibility mapping of Iran.We prepared a dataset comprising 4069 historical landslide locations and 11 conditioning factors(altitude,slope degree,profile curvature,distance to river,aspect,plan curvature,distance to road,distance to fault,rainfall,geology and land-sue)to construct a geospatial database and divided the data into the training and the testing dataset.We then developed RNN and CNN algorithms to generate landslide susceptibility maps of Iran using the training dataset.We calculated the receiver operating characteristic(ROC)curve and used the area under the curve(AUC)for the quantitative evaluation of the landslide susceptibility maps using the testing dataset.Better performance in both the training and testing phases was provided by the RNN algorithm(AUC=0.88)than by the CNN algorithm(AUC=0.85).Finally,we calculated areas of susceptibility for each province and found that 6%and 14%of the land area of Iran is very highly and highly susceptible to future landslide events,respectively,with the highest susceptibility in Chaharmahal and Bakhtiari Province(33.8%).About 31%of cities of Iran are located in areas with high and very high landslide susceptibility.The results of the present study will be useful for the development of landslide hazard mitigation strategies.

A Comprehensive Investigation of Machine Learning Feature Extraction and ClassificationMethods for Automated Diagnosis of COVID-19 Based on X-ray Images

The quick spread of the CoronavirusDisease(COVID-19)infection around the world considered a real danger for global health.The biological structure and symptoms of COVID-19 are similar to other viral chest maladies,which makes it challenging and a big issue to improve approaches for efficient identification of COVID-19 disease.In this study,an automatic prediction of COVID-19 identification is proposed to automatically discriminate between healthy and COVID-19 infected subjects in X-ray images using two successful moderns are traditional machine learning methods(e.g.,artificial neural network(ANN),support vector machine(SVM),linear kernel and radial basis function(RBF),k-nearest neighbor(k-NN),Decision Tree(DT),andCN2 rule inducer techniques)and deep learningmodels(e.g.,MobileNets V2,ResNet50,GoogleNet,DarkNet andXception).A largeX-ray dataset has been created and developed,namely the COVID-19 vs.Normal(400 healthy cases,and 400 COVID cases).To the best of our knowledge,it is currently the largest publicly accessible COVID-19 dataset with the largest number of X-ray images of confirmed COVID-19 infection cases.Based on the results obtained from the experiments,it can be concluded that all the models performed well,deep learning models had achieved the optimum accuracy of 98.8%in ResNet50 model.In comparison,in traditional machine learning techniques, the SVM demonstrated the best result for an accuracy of 95% and RBFaccuracy 94% for the prediction of coronavirus disease 2019.

Strigolactones interact with other phytohormones to modulate plant root growth and development

Strigolactones(SLs),which are biosynthesized mainly in roots,modulate various aspects of plant growth and development.Here,we review recent research on the role of SLs and their cross-regulation with auxin,cytokinin,and ethylene in the modulation of root growth and development.Under nutrientsufficient conditions,SLs regulate the elongation of primary roots and inhibit adventitious root formation in eudicot plants.SLs promote the elongation of seminal roots and increase the number of adventitious roots in grass plants in the short term,while inhibiting lateral root development in both grass and eudicot plants.The effects of SLs on the elongation of root hairs are variable and depend on plant species,growth conditions,and SL concentration.Nitrogen or phosphate deficiency induces the accumulation of endogenous SLs,modulates root growth and development.Genetic analyses indicate cross-regulation of SLs with auxin,cytokinin,and ethylene in regulation of root growth and development.We discuss the implications of these studies and consider their potential for exploiting the components of SL signaling for the design of crop plants with more efficient soil-resource utilization.

Spatial prediction of landslide susceptibility in western Serbia using hybrid support vector regression(SVR)with GWO,BAT and COA algorithms

In this study,we developed multiple hybrid machine-learning models to address parameter optimization limitations and enhance the spatial prediction of landslide susceptibility models.We created a geographic information system database,and our analysis results were used to prepare a landslide inventory map containing 359 landslide events identified from Google Earth,aerial photographs,and other validated sources.A support vector regression(SVR)machine-learning model was used to divide the landslide inventory into training(70%)and testing(30%)datasets.The landslide susceptibility map was produced using 14 causative factors.We applied the established gray wolf optimization(GWO)algorithm,bat algorithm(BA),and cuckoo optimization algorithm(COA)to fine-tune the parameters of the SVR model to improve its predictive accuracy.The resultant hybrid models,SVR-GWO,SVR-BA,and SVR-COA,were validated in terms of the area under curve(AUC)and root mean square error(RMSE).The AUC values for the SVR-GWO(0.733),SVR-BA(0.724),and SVR-COA(0.738)models indicate their good prediction rates for landslide susceptibility modeling.SVR-COA had the greatest accuracy,with an RMSE of 0.21687,and SVR-BA had the least accuracy,with an RMSE of 0.23046.The three optimized hybrid models outperformed the SVR model(AUC=0.704,RMSE=0.26689),confirming the ability of metaheuristic algorithms to improve model performance.

Predicting rock size distribution in mine blasting using various novel soft computing models based on meta-heuristics and machine learning algorithms

Blasting is well-known as an effective method for fragmenting or moving rock in open-pit mines.To evaluate the quality of blasting,the size of rock distribution is used as a critical criterion in blasting operations.A high percentage of oversized rocks generated by blasting operations can lead to economic and environmental damage.Therefore,this study proposed four novel intelligent models to predict the size of rock distribution in mine blasting in order to optimize blasting parameters,as well as the efficiency of blasting operation in open mines.Accordingly,a nature-inspired algorithm(i.e.,firefly algorithm-FFA)and different machine learning algorithms(i.e.,gradient boosting machine(GBM),support vector machine(SVM),Gaussian process(GP),and artificial neural network(ANN))were combined for this aim,abbreviated as FFA-GBM,FFA-SVM,FFA-GP,and FFA-ANN,respectively.Subsequently,predicted results from the abovementioned models were compared with each other using three statistical indicators(e.g.,mean absolute error,root-mean-squared error,and correlation coefficient)and color intensity method.For developing and simulating the size of rock in blasting operations,136 blasting events with their images were collected and analyzed by the Split-Desktop software.In which,111 events were randomly selected for the development and optimization of the models.Subsequently,the remaining 25 blasting events were applied to confirm the accuracy of the proposed models.Herein,blast design parameters were regarded as input variables to predict the size of rock in blasting operations.Finally,the obtained results revealed that the FFA is a robust optimization algorithm for estimating rock fragmentation in bench blasting.Among the models developed in this study,FFA-GBM provided the highest accuracy in predicting the size of fragmented rocks.The other techniques(i.e.,FFA-SVM,FFA-GP,and FFA-ANN)yielded lower computational stability and efficiency.Hence,the FFA-GBM model can be used as a powerful and precise soft computing tool that can be applied to practical engineering cases aiming to improve the quality of blasting and rock fragmentation.

Dynamics of bioconvection flow of micropolar nanoparticles with Cattaneo-Christov expressions

A numerical analysis is performed to analyze the bioconvective double diffusive micropolar non-Newtonian nanofluid flow caused by stationary porous disks.The consequences of the current flow problem are further extended by incorporating the Brownian and thermophoresis aspects.The energy and mass species equations are developed by utilizing the Cattaneo and Christov model of heat-mass fluxes.The flow equations are converted into an ordinary differential model by employing the appropriate variables.The numerical solution is reported by using the MATLAB builtin bvp4c method.The consequences of engineering parameters on the flow velocity,the concentration,the microorganisms,and the temperature profiles are evaluated graphically.The numerical data for fascinating physical quantities,namely,the motile density number,the local Sherwood number,and the local Nusselt number,are calculated and executed against various parametric values.The microrotation magnitude reduces for increasing magnetic parameters.The intensity of the applied magnetic field may be utilized to reduce the angular rotation which occurs in the lubrication processes,especially in the suspension of flows.On the account of industrial applications,the constituted output can be useful to enhance the energy transport efficacy and microbial fuel cells.

Synchronization Phenomena Investigation of a New Nonlinear Dynamical System 4D by Gardano’s and Lyapunov’s Methods

Synchronization is one of the most important characteristics of dynamic systems.For this paper,the authors obtained results for the nonlinear systems controller for the custom Synchronization of two 4D systems.The findings have allowed authors to develop two analytical approaches using the second Lyapunov(Lyp)method and the Gardanomethod.Since the Gardano method does not involve the development of special positive Lyp functions,it is very efficient and convenient to achieve excessive systemSYCR phenomena.Error is overcome by using Gardano and overcoming some problems in Lyp.Thus we get a great investigation into the convergence of error dynamics,the authors in this paper are interested in giving numerical simulations of the proposed model to clarify the results and check them,an important aspect that will be studied is Synchronization Complete hybrid SYCR and anti-Synchronization,by making use of the Lyapunov expansion analysis,a proposed control method is developed to determine the actual.The basic idea in the proposed way is to receive the evolution of between two methods.Finally,the present model has been applied and showing in a new attractor,and the obtained results are compared with other approximate results,and the nearly good coincidence was obtained.

Optimal treatment of stratified Carreau and Casson nanofluids flows in Darcy-Forchheimer porous space over porous matrix

A comparative three-dimensional(3D)analysis for Casson-nanofluid and Carreau-nanofluid flows due to a flat body in a magnetohydrodynamic(MHD)stratified environment is presented.Flow is estimated to be suspended in a Darcy-Forchheimer medium.Soret and Dufour responses are also accommodated in the flow field.A moving(rotating)coordinate system is exercised to examine the bidirectionally stretched flow fields(flow,heat transfer,and mass transfer).Nanofluid is compounded by taking ethylene glycol/sodium alginate as base fluid and ferric-oxide(Fe3O4)as nanoparticles.Governing equations are handled by the application of optimal homotopy asymptotic method(OHAM),where convergence parameters are optimized through the classical least square procedure.The novel mechanism(hidden physics)due to appearing parameters is explored with the assistance of tabular and graphical expositions.Outcomes reveal the double behavior state for temperature field with thermal stratification/Dufour number,and for concentration field with Soret number due to the presence of turning points.

Security Requirement Management for Cloud-Assisted and Internet of Things—Enabled Smart City

The world is rapidly changing with the advance of information technology.The expansion of the Internet of Things(IoT)is a huge step in the development of the smart city.The IoT consists of connected devices that transfer information.The IoT architecture permits on-demand services to a public pool of resources.Cloud computing plays a vital role in developing IoT-enabled smart applications.The integration of cloud computing enhances the offering of distributed resources in the smart city.Improper management of security requirements of cloud-assisted IoT systems can bring about risks to availability,security,performance,condentiality,and privacy.The key reason for cloud-and IoT-enabled smart city application failure is improper security practices at the early stages of development.This article proposes a framework to collect security requirements during the initial development phase of cloud-assisted IoT-enabled smart city applications.Its three-layered architecture includes privacy preserved stakeholder analysis(PPSA),security requirement modeling and validation(SRMV),and secure cloud-assistance(SCA).A case study highlights the applicability and effectiveness of the proposed framework.A hybrid survey enables the identication and evaluation of signicant challenges.

Detection and Grading of Diabetic Retinopathy in Retinal Images Using Deep Intelligent Systems: A Comprehensive Review

Diabetic Retinopathy(DR)is an eye disease that mainly affects people with diabetes.People affected by DR start losing their vision from an early stage even though the symptoms are identified only at the later stage.Once the vision is lost,it cannot be regained but can be prevented from causing any further damage.Early diagnosis of DR is required for preventing vision loss,for which a trained ophthalmologist is required.The clinical practice is time-consuming and is not much successful in identifying DR at early stages.Hence,Computer-Aided Diagnosis(CAD)system is a suitable alternative for screening and grading of DR for a larger population.This paper addresses the different stages in CAD system and the challenges in identifying and grading of DR by analyzing various recently evolved techniques.The performance metrics used to evaluate the Computer-Aided Diagnosis system for clinical practice is also discussed.

Design and Fabrication of a Low-Loss Microstrip Lowpass-Bandpass Diplexer for WiMAX Applications

This work presents a compact lowpass-bandpass microstrip diplexer with a novel configuration.It consists of a lowpass filter integrated with a bandpass filter via a simple compact junction.The proposed bandpass filter consists of four rectangular patch cells and some thin strips.The step impedance structures,with a radial cell,are applied to achieve a lowpass frequency response.The lowpass channel of the introduced diplexer has 2.64 GHz cut-off frequency,whereas,the bandpass channel center frequency is 3.73 GHz for WiMAX applications and covers the frequencies3.31 GHz to 4 GHz.In addition to having novel structures,both filters have other advantages in terms of high return loss,low insertion loss and high selectivity.The presented microstrip diplexer has the compact size of 29 mm×13.8 mm×0.762 mm,calculated at 2.64 GHz.The obtained insertion losses are 0.20 dB(for the first channel)and 0.25 dB(for the second channel),which make the proposed diplexer suitable for energy harvesting.The stopband properties of both bandpass and lowpass filters are improved by creating several transmission zeros.The comparison results show that the lowest insertion losses,the minimum gap between channels,good return losses,and good isolation are obtained.

Numerically simulated behavior of radiative Fe_(3)O_(4) and multi-walled carbon nanotube hybrid nanoparticle flow in presence of Lorentz force

Free convection in hybrid nanomaterial-saturated permeable media is crucial in various engineering applications.The present study aims to investigate the free convection of an aqueous-based hybrid nanomaterial through a zone under the combined effect of the Lorentz force and radiation.The natural convection of the hybrid nanomaterial is modeled by implementing a control volume finite element method(CVFEM)-based code,whereas Darcy assumptions are used to model the porosity terms in the momentum buoyancy equation involving the average Nusselt number Nu_(ave),flow streamlines,and isotherm profiles.A formula for estimating Nu_(ave) is proposed.The results show that the magnetic force retards the flow,and the fluid tends to attract the magnetic field source.Nu_(ave) is directly correlated with the Rayleigh number and radiation;however,it is indirectly dependent on the Hartmann number.Conduction is the dominant mode at larger Darcy and Hartmann numbers.

Modeling viscosity of methane,nitrogen,and hydrocarbon gas mixtures at ultra-high pressures and temperatures using group method of data handling and gene expression programming techniques

Accurate gas viscosity determination is an important issue in the oil and gas industries.Experimental approaches for gas viscosity measurement are timeconsuming,expensive and hardly possible at high pressures and high temperatures(HPHT).In this study,a number of correlations were developed to estimate gas viscosity by the use of group method of data handling(GMDH)type neural network and gene expression programming(GEP)techniques using a large data set containing more than 3000 experimental data points for methane,nitrogen,and hydrocarbon gas mixtures.It is worth mentioning that unlike many of viscosity correlations,the proposed ones in this study could compute gas viscosity at pressures ranging between 34 and 172 MPa and temperatures between 310 and 1300 K.Also,a comparison was performed between the results of these established models and the results of ten wellknown models reported in the literature.Average absolute relative errors of GMDH models were obtained 4.23%,0.64%,and 0.61%for hydrocarbon gas mixtures,methane,and nitrogen,respectively.In addition,graphical analyses indicate that the GMDH can predict gas viscosity with higher accuracy than GEP at HPHT conditions.Also,using leverage technique,valid,suspected and outlier data points were determined.Finally,trends of gas viscosity models at different conditions were evaluated.

Modeling and Simulation of Two Axes Gimbal Using Fuzzy Control

The application of the guided missile seeker is to provide stability to the sensor’s line of sight toward a target by isolating it from the missile motion and vibration.The main objective of this paper is not only to present the physical modeling of two axes gimbal system but also to improve its performance through using fuzzy logic controlling approach.The paper is started by deriving the mathematical model for gimbals motion using Newton’s second law,followed by designing the mechanical parts of model using SOLIDWORKS and converted to xml file to connect dc motors and sensors using MATLAB/SimMechanics.Then,a Mamdani-type fuzzy and a Proportional-Integral-Derivative(PID)controllers were designed using MATLAB software.The performance of both controllers was evaluated and tested for different types of input shapes.The simulation results showed that self-tuning fuzzy controller provides better performance,since no overshoot,small steady-state error and small settling time compared to PID controller.

System Performance of Wireless Sensor Network Using LoRa–Zigbee Hybrid Communication

Wireless sensor network(WSN)is considered as the fastest growing technology pattern in recent years because of its applicability in varied domains.Many sensor nodes with different sensing functionalities are deployed in the monitoring area to collect suitable data and transmit it to the gateway.Ensuring communications in heterogeneous WSNs,is a critical issue that needs to be studied.In this research paper,we study the system performance of a heterogeneous WSN using LoRa–Zigbee hybrid communication.Specifically,two Zigbee sensor clusters and two LoRa sensor clusters are used and combined with two Zigbee-to-LoRa converters to communicate in a network managed by a LoRa gateway.The overall system integrates many different sensors in terms of types,communication protocols,and accuracy,which can be used in many applications in realistic environments such as on land,under water,or in the air.In addition to this,a synchronous management software on ThingSpeak Web server and Blynk app is designed.In the proposed system,the token ring protocol in Zigbee network and polling mechanism in LoRa network is used.The system can operate with a packet loss rate of less than 0.5%when the communication range of the Zigbee network is 630 m,and the communication range of the LoRa network is 3.7 km.On the basis of the digital results collected on the management software,this study proves tremendous improvements in the system performance.

Detecting Lumbar Implant and Diagnosing Scoliosis from Vietnamese X-Ray Imaging Using the Pre-Trained API Models and Transfer Learning

With the rapid growth of the autonomous system,deep learning has become integral parts to enumerate applications especially in the case of healthcare systems.Human body vertebrae are the longest and complex parts of the human body.There are numerous kinds of conditions such as scoliosis,vertebra degeneration,and vertebrate disc spacing that are related to the human body vertebrae or spine or backbone.Early detection of these problems is very important otherwise patients will suffer from a disease for a lifetime.In this proposed system,we developed an autonomous system that detects lumbar implants and diagnoses scoliosis from the modified Vietnamese x-ray imaging.We applied two different approaches including pre-trained APIs and transfer learning with their pre-trained models due to the unavailability of sufficient x-ray medical imaging.The results show that transfer learning is suitable for the modified Vietnamese x-ray imaging data as compared to the pre-trained API models.Moreover,we also explored and analyzed four transfer learning models and two pre-trained API models with our datasets in terms of accuracy,sensitivity,and specificity.

Prediction of flyrock induced by mine blasting using a novel kernel-based extreme learning machine

Blasting is a common method of breaking rock in surface mines.Although the fragmentation with proper size is the main purpose,other undesirable effects such as flyrock are inevitable.This study is carried out to evaluate the capability of a novel kernel-based extreme learning machine algorithm,called kernel extreme learning machine(KELM),by which the flyrock distance(FRD) is predicted.Furthermore,the other three data-driven models including local weighted linear regression(LWLR),response surface methodology(RSM) and boosted regression tree(BRT) are also developed to validate the main model.A database gathered from three quarry sites in Malaysia is employed to construct the proposed models using 73 sets of spacing,burden,stemming length and powder factor data as inputs and FRD as target.Afterwards,the validity of the models is evaluated by comparing the corresponding values of some statistical metrics and validation tools.Finally,the results verify that the proposed KELM model on account of highest correlation coefficient(R) and lowest root mean square error(RMSE) is more computationally efficient,leading to better predictive capability compared to LWLR,RSM and BRT models for all data sets.

GIS-based landslide susceptibility modeling:A comparison between fuzzy multi-criteria and machine learning algorithms

Hazards and disasters have always negative impacts on the way of life.Landslide is an overwhelming natural as well as man-made disaster that causes loss of natural resources and human properties throughout theworld.The present study aimed to assess and compare the prediction efficiency of different models in landslide susceptibility in the Kysuca river basin,Slovakia.In this regard,the fuzzy decision-making trial and evaluation laboratory combining with the analytic network process(FDEMATEL-ANP),Naïve Bayes(NB)classifier,and random forest(RF)classifier were considered.Initially,a landslide inventory map was produced with 2000 landslide and nonlandslide points by randomly dividedwith a ratio of 70%:30%for training and testing,respectively.The geospatial database for assessing the landslide susceptibility was generated with the help of 16 landslide conditioning factors by allowing for topographical,hydrological,lithological,and land cover factors.The ReliefF methodwas considered for determining the significance of selected conditioning factors and inclusion in the model building.Consequently,the landslide susceptibility maps(LSMs)were generated using the FDEMATEL-ANP,Naïve Bayes(NB)classifier,and random forest(RF)classifier models.Finally,the area under curve(AUC)and different arithmetic evaluation were used for validating and comparing the results and models.The results revealed that random forest(RF)classifier is a promising and optimum model for landslide susceptibility in the study area with a very high value of area under curve(AUC=0.954),lower value of mean absolute error(MAE=0.1238)and root mean square error(RMSE=0.2555),and higher value of Kappa index(K=0.8435)and overall accuracy(OAC=92.2%).

Comparison of machine learning models for gully erosion susceptibility mapping

Gully erosion is a disruptive phenomenon which extensively affects the Iranian territory,especially in the Northern provinces.A number of studies have been recently undertaken to study this process and to predict it over space and ultimately,in a broader national effort,to limit its negative effects on local communities.We focused on the Bastam watershed where 9.3%of its surface is currently affected by gullying.Machine learning algorithms are currently under the magnifying glass across the geomorphological community for their high predictive ability.However,unlike the bivariate statistical models,their structure does not provide intuitive and quantifiable measures of environmental preconditioning factors.To cope with such weakness,we interpret preconditioning causes on the basis of a bivariate approach namely,Index of Entropy.And,we performed the susceptibility mapping procedure by testing three extensions of a decision tree model namely,Alternating Decision Tree(ADTree),Naive-Bayes tree(NBTree),and Logistic Model Tree(LMT).We dichotomized the gully information over space into gully presence/absence conditions,which we further explored in their calibration and validation stages.Being the presence/absence information and associated factors identical,the resulting differences are only due to the algorithmic structures of the three models we chose.Such differences are not significant in terms of performances;in fact,the three models produce outstanding predictive AUC measures(ADTree=0.922;NBTree=0.939;LMT=0.944).However,the associated mapping results depict very different patterns where only the LMT is associated with reasonable susceptibility patterns.This is a strong indication of what model combines best performance and mapping for any natural hazard-oriented application.