Evaluation of reservoir environment by chemical properties of reservoir water‒A case study of Chang 6 reservoir in Ansai oilfield,Ordos Basin,China

The Ordos Basin is the largest continental multi-energy mineral basin in China,which is rich in coal,oil and gas,and uranium resources.The exploitation of mineral resources is closely related to reservoir water.The chemical properties of reservoir water are very important for reservoir evaluation and are significant indicators of the sealing of reservoir oil and gas resources.Therefore,the caprock of the Chang 6 reservoir in the Yanchang Formation was evaluated.The authors tested and analyzed the chemical characteristics of water samples selected from 30 wells in the Chang 6 reservoir of Ansai Oilfield in the Ordos Basin.The results show that the Chang 6 reservoir water in Ansai Oilfield is dominated by calcium-chloride water type with a sodium chloride coefficient of generally less than 0.5.The chloride magnesium coefficients are between 33.7 and 925.5,most of which are greater than 200.The desulfurization coefficients range from 0.21 to 13.4,with an average of 2.227.The carbonate balance coefficients are mainly concentrated below 0.01,with an average of 0.008.The calcium and magnesium coefficients are between 0.08 and 0.003,with an average of 0.01.Combined with the characteristics of the four-corner layout of the reservoir water,the above results show that the graphics are basically consistent.The study indicates that the Chang 6 reservoir in Ansai Oilfield in the Ordos Basin is a favorable block for oil and gas storage with good sealing properties,great preservation conditions of oil and gas,and high pore connectivity.

Sedimentary characteristics and processes of the Paleogene Dainan Formation in the Gaoyou Depression, North Jiangsu Basin, eastern China

In this paper,the type,vertical evolution,and distribution pattern of sedimentary facies of the Paleogene Dainan Formation in the Gaoyou Depression of the North Jiangsu Basin are studied in detail.Results show that fan delta,delta,nearshore subaqueous fan,and lacustrine facies developed during the Dainan Formation period and their distribution pattern was mainly controlled by tectonics and paleogeography.The fan delta and nearshore subaqueous fan facies predominantly occur in the southern steep slope region where fault-induced subsidence is thought to have created substantial accommodation,whereas the delta facies are distributed on the northern gentle slope which is thought to have experienced less subsidence.Finally,the lacustrine facies is shown to have developed in the center of the depression,as well as on the flanks of the fan delta,delta,and nearshore subaqueous fan facies.Vertically,the Dainan Formation represents an integrated transgressiveregressive cycle,with the E2d1being the transgressive sequence and the E2d2being the regressive sequence.This distribution model of sedimentary facies plays an important role in predicting favorable reservoir belts for the Dainan Formation in the Gaoyou Depression and similar areas.In the Gaoyou Depression,sandstones of the subaqueous distributary channels in the fan delta and the subaqueous branch channels in the delta are characterized by physical properties favorable for reservoir formation.

Lacustrine shale oiliness influenced by diabase intrusions in the Paleogene Funing Formation,Subei Basin,China

The research on the correlation between hydrocarbon accumulations and magmatic activities has always attracted aroused much wide attention.Existing research has primarily the hydrocarbon generations capability of source rocks and the quality of reservoirs by diabase intrusions.whereas,rare systematic research has been conducted on the oiliness and enrichment mechanism.To be specific,the diabase intrusive zone,the contact metamorphic zone and the normal shale zone of the Funing Formation in the Gaoyou Sag,Subei Basin were taken as the object of this study.Moreover,in this study,the hydrocarbon generation quality,reservoir quality,and oil-bearing quality of diabase-metamorphic zone-normal shale were evaluated using X-ray diffractions,argon ion polishing-field emission scanning electron microscope,energy spectrum,rock slice/light-sheet microscopic observations,organic geochemical tests,N_(2) gas adsorption and 2D NMR tests.The results indicated that the intrusive zone,the metamorphic zone,and the normal zone were formed in order by the degree of effect of diabase intrusions.Secondly,the oil content of different parts exhibited significant heterogeneity due to the baking effect of diabase,and the metamorphic zone had the significantly better oil-bearing nature than the intrusive zone.Lastly,a distribution model was proposed for the diabase intrusive zone-metamorphic zone-normal surrounding rock zone.

A novel method for predicting breakthrough time of horizontal wells in bottom water reservoirs

Dimensional analysis and numerical simulations were carried out to research prediction method of breakthrough time of horizontal wells in bottom water reservoir. Four dimensionless independent variables and dimensionless time were derived from 10 influencing factors of the problem by using dimensional analysis. Simulations of horizontal well in reservoir with bottom water were run to find the prediction correlation. A general and concise functional relationship for predicting breakthrough time was established based on simulation results and theoretical analysis. The breakthrough time of one conceptual model predicted by the correlation is very close to the result by Eclipse with less than 2% error. The practical breakthrough time of one well in Helder oilfield is 10 d, and the predicted results by the method is 11.2 d, which is more accurate than the analytical result. Case study indicates that the method could predict breakthrough time of horizontal well under different reservoir conditions accurately. For its university and ease of use, the method is suitable for quick prediction of breakthrough time.

Tectonics-palaeogeomorphology in rift basins: controlling effect on the sequence architecture

The relationship between deposition and tectonics of sedimentary basins has been a significant subject in recent years.Using typical rift basins such as the Nanpu Sag as an example,combined with the analysis of the tectonics-palaeogeomorphology of basins,we undertook a detailed study of the differences of the third-order sequences in different basins,the combination of depositional systems within the sequence framework and the distribution of depocenters and subsidence centers.Our results revealed a significant relationship between the tectonics-palaeogeomorphology of rift basins and the filling styles of sedimentary sequences.The basin structure plays a primary role in controlling the development of the third-order sequences and the boundary of these sequences is easily formed in basins with gentle slopes,shallow water and a small area.The characteristics of the tectonics-palaeogeomorphology of rift basins are dominated by half-grabens of extensional faults,which affect the temporal and spatial combination of sedimentary systems within the sequences as well as the distribution of depocenters and subsidence centers.Based on the development rules of the faults dominating the half-grabens of extensional faults,rift basins are classified into two types： the single fault segmented-linkage type and the multi-fault combination type.The main controlling factors of the temporal and spatial combination of sedimentary systems and the distribution of depocenters and subsidence centers in different basins are different.The characteristics of early segmentation and later linkage of the faults play a critical role in controlling the sedimentary system combination within the sequence framework and the temporal and spatial differences of depocenters and subsidence centers of the single fault segmented-linkage rift basins,while the differences in fault activities are the dominating factors of the multi-fault combination rift basins.

Sequence stratigraphic framework and sedimentary model of Shanxi Formation in northeast Zhoukou Depression of the North China Plate

The sequence stratigraphic framework of Shanxi Formation in the northeast Zhoukou Depression was established based on detailed sequence stratigraphical and sedimentological analysis by utilizing the logging and core data of six wells drilled in the eastern tectonic unit of Zhoukou Depression.It was divided into three third-order sequences,namely SQs1,SQs2,and SQs3 from bottom to top.Each sequence can be divided into a transgressive system tract(TST)and a highstand system tract(HST).Furthermore,four sequence boundaries and three maximum flooding surfaces were identified,and they are the bottom interface SBs and maximum flooding surface mfss1 of SQs1,the bottom interface SBs1 and maximum flooding surface mfss2 of SQs2,the bottom interface SBs3 and maximum flooding surface mfss3 of SQs3,and the top interface SBx from bottom to top.Carbonate tidal flat–clastic tidal flat sedimentary system developed in Shanxi Formation in the northeast Zhoukou Depression(also referred to as the study area)under the control of regression.Meanwhile,four sedimentary microfacies were identified in the sedimentary system,which are lime-mud flats,sand flats,mixed flats,and mud flats.The transgression in the study area occurred from the southeast to the northwest.Therefore,the northwestern part is the seaward side,and the southeastern part is the landward side.As revealed by relevant drilling data,SQs1 of the Shanxi Formation is characterized by the development of limestone and carbonaceous mudstone,with limestone,dark mudstone,and carbonaceous mudstone mainly developing.Meanwhile,lime-mud flats were mainly deposited in it.During the periods of SQs2 and SQs3,the sedimentary environment of the study area changed from the carbonate tidal flats to clastic tidal flats as the coastline migrated towards the sea.In these periods,sand flats mainly developed near the maximum flooding surfaces and were relatively continuous in the eastern and southern parts of the transgressive system tract;mixed flats were relatively continuous in the western and northern parts of the transgressive system tract as well as the eastern and southern parts of the highstand system tract;mud flats widely developed in the highstand system tract.Peat flats mainly developed in the period of HSTs2,with coal seams relatively developing in the southeastern part of the study area as revealed by drilling data.The peat flats in SQs2 are favorable hydrocarbon source layers,the lime-mud flats in SQs1 and sand flats formed in the transgression periods of SQs2 and SQs3 constitute favorable hydrocarbon reservoirs,and the mud flats form in the transgressions periods serve as favorable cap rocks.Therefore,the study area features a reservoir-cap assemblage for self-generating and self-storing of hydrocarbon,and the southeastern part of the study area can be taken as a favorable exploration area.

Exploration Strategies for Complex Fault Block Reservoirs in the Subei Basin

The geological background of the Subei basin is that of small relief subsidence, low geothermal gradient, multi-sedimentary hiatuses, intense reconstruction of the basin, frequent magmatic activity, and a unique combination of source rock and reservoir. This geological background resulted in characteristics such as many small fault blocks, multiple oil-bearing formations, scattered oil distribution, mini- to small-sized reservoirs, and difficulties in exploration. Aimed at such characteristics, an effective exploration strategy was adopted, and the oil reserves, production and economic benefits of the Jiangsu oilfield were significantly increased. This exploration strategy included understanding the hydrocarbon generation mechanism of source rocks, progressive evaluation of oil resources, comprehensive research on the faulted systems, the distribution of oil reservoirs and their controlling factors. The techniques used included integration of acquisition, processing and interpretation with 3-D seismics as the core technology, trap description and evaluation, directional drilling and cluster drilling, integration of cuttings logging, gas chromatographic logging and geochemical logging, and integration of early reservoir description and progressive exploration and development. This strategy could be guidance for other complex fault blocks.

Provenance records of the North Jiangsu Basin,East China:Zircon U-Pb geochronology and geochemistry from the Paleogene Dainan Formation in the Gaoyou Sag

Detailed zircon U-Pb dating and whole-rock geochemical analyses were carried out on the sedimentary rocks of the Paleogene Dainan Formation from Gaoyou Sag in the North Jiangsu Basin,East China.Whole-rock rare earth element characteristics suggest that the provenance was mainly from the Late Proterozoic low-grade metamorphic felsic rocks in the Dabie-Sulu orogenic belt,with the parent rocks probably being the I-type high-potassium granite gneiss.Cathodoluminescence images indicate that most of the detrital zircons are originally magmatic.A few zircons show overgrowths,indicating multiple-episode tectonic events.The U-Pb age distribution patterns of the detrital zircons suggest four main magmatic episodes in the provenance:Late Archean-Early Proterozoic(2450-2600 Ma),Early Proterozoic(1700-1900 Ma),Late Proterozoic(700-850 Ma),and Late Paleozoic-Mesozoic(100-300 Ma).These zircon U-Pb age and whole-rock geochemical results suggest that the sediments of the Dainan Formation were mainly sourced from the recycled orogenic belts within and/or around the North Jiangsu Basin,including the basement of the Yangtze Block,the Neoproterozoic rocks in the Dabie-Sulu orogenic belt,and the Mesozoic igneous rocks in the south part of Zhangbaling Uplift.

Paleomagnetic constraints on Paleogene-Neogene rotation and paleo-stress in the northern Qaidam Basin

Knowing the rotation and paleo-stress history in Qaidam Basin is a fundamental parameter to quantify the mechanism of intracontinental deformation in Tibetan Plateau.However,few studies have been conducted on tectonic rotation and stress evolution over long timescales in the Qaidam Basin.Here,we report new magnetic declination and the anisotropy of magnetic susceptibility(AMS)from a~52–7 Ma sequence of fluvial and lacustrine sediments in the Dahonggou(DHG)section in the northern Qaidam Basin.The magnetic declination revealed that the northern Qaidam Basin underwent a clockwise rotation 25.1°±8.6°during~33–17 Ma,followed by a counterclockwise rotation 16.9°±6.8°during~17–13.5 Ma.The AMS results showed that the“earliest deformation”fabrics were interrupted by the“pencil structure”fabrics in the intervals of~52–45 and~21–15 Ma.The interruption,synchronous with the marked deceleration of the India-Asia convergence rate,indicates pulse of strong tectonic compressive stress.In addition,the AMS results documented a transition in stress direction from S-N to SW-NE at~15 Ma,suggesting a kinematic shift in the northeastern TP.Our constraints on the rotation and stress from the northern Qaidam Basin support the two-stage evolution of the Altyn Tagh Fault(ATF).The fast-rate slip motion on the ATF during the early Oligocene caused the clockwise rotation in the northern Qaidam Basin;the second stage with enhanced thrusting since the middle Miocene caused extensive crustal shortening and dispersive NW-trending folds and faults in the Qaidam Basin and the northeastern TP.