期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
An Innovative Electro-Optic Q-Switch Technology in 1064 nm and 1319 nm Dual-Wavelength Operation of a Nd:YAG Laser
1
作者 金光勇 吴春婷 +2 位作者 陈薪羽 于永吉 王超 《Chinese Physics Letters》 SCIE CAS CSCD 2013年第3期88-91,共4页
An innovative electro-optic(EO)Q-switch technology in 1064 nm and 1319 nm dual-wavelength operation of a Nd:YAG laser is illustrated.Output energy of 4.6 mJ and pulse width of 400 ns for 1064 nm and output energy of 8... An innovative electro-optic(EO)Q-switch technology in 1064 nm and 1319 nm dual-wavelength operation of a Nd:YAG laser is illustrated.Output energy of 4.6 mJ and pulse width of 400 ns for 1064 nm and output energy of 8.7 mJ and pulse width of 80 ns for 1319 nm are achieved simultaneously at the repetition rate of 1 Hz and pumping voltage of 750 V by using this bias voltage electro-optic Q-switched-technology when the voltage on LiNbO_(3) crystal is 2254 V.The strong line of 1064 nm in Q-switched operation is inhibited efficiently. 展开更多
关键词 ND:YAG SWITCHED PUMPING
下载PDF
The Process of a Laser-Supported Combustion Wave Induced by Millisecond Pulsed Laser on Aluminum Alloy 被引量:1
2
作者 张巍 魏智 +1 位作者 王翼斌 金光勇 《Chinese Physics Letters》 SCIE CAS CSCD 2016年第1期60-62,共3页
We study the process of a laser-supported combustion wave (LSCW) when an aluminum alloy is irradiated by a millisecond pulse laser based on the method of laser shadowgraphy. Under the condition of different laser pa... We study the process of a laser-supported combustion wave (LSCW) when an aluminum alloy is irradiated by a millisecond pulse laser based on the method of laser shadowgraphy. Under the condition of different laser parameters, the obtained results include the velocity, ignition threshold of LSCW and the variation law. The speed of LSCW increases with the laser energy under the same irradiation laser pulse width, and the speed of LSCW reduces with the increase of the laser pulse width under the same irradiation laser energy. Moreover, the ignition time of LSCW becomes shorter by increasing the laser number of the pulse and is not effected by changing the frequencies, when keeping the laser pulse width and energy unchanged. The results of the study can be applied in the laser propulsion technology and metal surface laser heat treatment, etc. 展开更多
关键词 of as in TIME is by The Process of a Laser-Supported Combustion Wave Induced by Millisecond Pulsed Laser on Aluminum Alloy on
下载PDF
A 200 kHz Q-Switched Adhesive-Free Bond Composite Nd:YVO4 Laser using a Double-Crystal RTP Electro-optic Modulator 被引量:3
3
作者 于永吉 陈薪羽 +3 位作者 王超 吴春婷 刘瑞 金光勇 《Chinese Physics Letters》 SCIE CAS CSCD 2012年第2期98-101,共4页
A diode-end-pumped electro-optic (EO) Q-switched adhesive-free bond composite Nd:YVO4 laser operating at a repetition rate of 200 kHz is reported.A pair of RbTiOPO4 (RTP) crystals are used as a high repetition EO Q-sw... A diode-end-pumped electro-optic (EO) Q-switched adhesive-free bond composite Nd:YVO4 laser operating at a repetition rate of 200 kHz is reported.A pair of RbTiOPO4 (RTP) crystals are used as a high repetition EO Q-switch.At the repetition rate of 200kHz,the maximum average output power of 11.8 W at wavelength 1064 nm and full width at half maximum of pulses of 16.65ns are achieved at an incident pump power of 27 W,corresponding to an optical conversion efficiency of 43.7% and a slope efficiency of 44.6%,respectively.To the best of our knowledge,this is the highest repetition rate reported on the EO Q-switched laser by using RTP crystals. 展开更多
关键词 ND:YVO4 RTP Crystal
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部