Characterization of bright betatron radiation generated by direct laser acceleration of electrons in plasma of near critical density

Directed x-rays produced in the interaction of sub-picosecond laser pulses of moderate relativistic intensity with plasma of near-critical density are investigated. Synchrotron-like (betatron) radiation occurs in the process of direct laser acceleration (DLA) of electrons in a relativisticlaser channel when the electrons undergo transverse betatron oscillations in self-generated quasi-static electric and magnetic fields. In anexperiment at the PHELIX laser system, high-current directed beams of DLA electrons with a mean energy ten times higher than the ponderomotive potential and maximum energy up to 100 MeV were measured at 10^(19) W/cm^(2)laser intensity. The spectrum of directed x-raysin the range of 5–60 keV was evaluated using two sets of Ross filters placed at 0°and 10°to the laser pulse propagation axis. The differential x-ray absorption method allowed for absolute measurements of the angular-dependent photon fluence. We report 10^(13) photons/sr withenergies >5 keV measured at 0°to the laser axis and a brilliance of 10^(21) photons s^(−1) mm^(−2) mrad−2(0.1%BW)−1. The angular distributionof the emission has an FWHM of 14°–16°. Thanks to the ultra-high photon fluence, point-like radiation source, and ultra-short emissiontime, DLA-based keV backlighters are promising for various applications in high-energy-density research with kilojoule petawatt-class laserfacilities.

Characterization and performance of the Apollon short-focal-area facility following its commissioning at 1 PW level

We present the results of the first commissioning phase of the short-focal-length area of the Apollon laser facility(located in Saclay,France),which was performed with the first available laser beam(F2),scaled to a nominal power of 1 PW.Under the conditions that were tested,this beam delivered on-target pulses of 10 J average energy and 24 fs duration.Several diagnostics were fielded to assess the performance of the facility.The on-target focal spot and its spatial stability,the temporal intensity profile prior to the main pulse,and the resulting density gradient formed at the irradiated side of solid targets have been thoroughly characterized,with the goal of helping users design future experiments.Emissions of energetic electrons,ions,and electromagnetic radiation were recorded,showing good laser-to-target coupling efficiency and an overall performance comparable to that of similar international facilities.This will be followed in 2022 by a further commissioning stage at the multipetawatt level.

A comparison of emissive and cold floating probe techniques for electric potential measurements in rf inductive discharge

A cold floating probe method was compared with the emissive floating probe method in terms of a low-pressure radio-frequency inductive discharge.The dependences of difference between the plasma potential and the floating potential on the electron temperature 1-8 eV,plasma density 109-1012 cm 3 and magnetic field 100-650 G were obtained.It was demonstrated that the difference between the potentials that obtained by these two methods can differ significantly from the expected value of 5.2 kTe/e for argon.

Particle Simulation of the Fast Ignition Mechanism for Laser Fusion

We have developed the two and half-dimension electromagnetic relativistic electron and mobile ion cloud-in-cell(CIC)code.Mechanisms of the fast ignition and interaction of ultra-intense and ultra-short pulse laser with plasma are analysed theoretically and simulated numerically using CIC code.Strong flows of relativistic electron and form of the channel are observed.The results show that the temperature of superhot electron is about MeV to tens of MeV,and the boring velocity is 0.05c-0.1c with c being the light speed.Some preliminary scale laws are obtained.This simulation quantitatively reproduces the experimental results at early and long times.

Development of new diagnostics based on LiF detector for pump-probe experiments

We present new diagnostics for use in optical laser pump-X-ray Free Electron Laser(XFEL)probe experiments to monitor dimensions,intensity profile and focusability of the XFEL beam and to control initial quality and homogeneity of targets to be driven by optical laser pulse.By developing X-ray imaging,based on the use of an LiF crystal detector,we were able to measure the distribution of energy inside a hard X-ray beam with unprecedented high spatial resolution(~1 mm)and across a field of view larger than some millimetres.This diagnostic can be used in situ,provides a very high dynamic range,has an extremely limited cost,and is relatively easy to be implemented in pump-probe experiments.The proposed methods were successfully applied in pump-probe experiments at the SPring-8 Angstrom Compact free electron LAser(SACLA)XFEL facility and its potential was demonstrated for current and future High Energy Density Science experiments.

Comparing of Hydrogen On-Board Storage by the Largest Car Companies, Relevance to Prospects for More Efficient Technologies

It presented a comparative consideration of General Motors long-term activities on the current subject of fuel-cell-powered electric vehicles vs Toyota Mirai recent results, relevant to prospects on more efficient and safe technologies of the hydrogen on-board storage. It also presented a call on the project International cooperation. The main aim of this paper is to attract attention of General Motors, Toyota and/or other large car companies to a real possibility of developing and using, in the nearest future, of the break-through hydrogen on-board storage technology based on the solid H2 intercalation into graphite nanostructures.

Evolution of ionization waves in a multi-pulsed plasma jet:the role of memory charges

In this paper,we discuss the properties of ionization waves(IWs)in a multi-pulsed plasma jet while using the two-dimensional computational approach.The IWs are generated by application of three short negative pulses with a repetition frequency 12.5 MHz.The simulations are performed continuously during a single run while accounting for charges accumulated inside(surface charges)and outside(space charges)the tube.The plasma forming gas mixture(He/O2=99.8%/0.2%)is injected through the discharge tube into the surrounding humid air.We show that an IW can emerge from the tube exit at a pulse rising edge(as a negative IW)and at a falling edge of the same pulse(as a positive IW).It is demonstrated that remnants of the negative and positive charges play an essential role in the discharge evolution.The first pulse travels the shortest distance as it propagates through the initially non-ionized environment.The IWs developing during the second pulse essentially enlarge the plasma plume length.At the same time,the IWs generated by the third pulse eventually decay due to the remnants of charges accumulated during the previous pulses.Accumulated memory charges can lead to the IW extinction.

Characterization of hot electrons generated by laser-plasma interaction at shock ignition intensities

In an experiment carried out at the Prague Asterix Laser System at laser intensities relevant to shock ignition conditions(I>10^(16) W/cm^(2)),the heating and transport of hot electrons were studied by using several complementary diagnostics,i.e.,K_(α)time-resolved imaging,hard x-ray filtering(a bremsstrahlung cannon),and electron spectroscopy.Ablators with differing composition from low Z(parylene N)to high Z(nickel)were used in multilayer planar targets to produce plasmas with different coronal temperature and collisionality and modify the conditions of hot-electron generation.The variety of available diagnostics allowed full characterization of the population of hot electrons,retrieving their conversion efficiency,time generation and duration,temperature,and angular divergence.The obtained results are shown to be consistent with those from detailed simulations and similar inertial confinement fusion experiments.Based on the measured data,the advantages,reliability,and complementarity of the experimental diagnostics are discussed.

Direct imaging of shock wave splitting in diamond at Mbar pressure

Understanding the behavior of matter at extreme pressures of the order of a megabar(Mbar)is essential to gain insight into various physical phenomena at macroscales—the formation of planets,young stars,and the cores of super-Earths,and at microscales—damage to ceramic materials and high-pressure plastic transformation and phase transitions in solids.Under dynamic compression of solids up to Mbar pressures,even a solid with high strength exhibits plastic properties,causing the induced shock wave to split in two:an elastic precursor and a plastic shock wave.This phenomenon is described by theoretical models based on indirect measurements of material response.The advent of x-ray free-electron lasers(XFELs)has made it possible to use their ultrashort pulses for direct observations of the propagation of shock waves in solid materials by the method of phase-contrast radiography.However,there is still a lack of comprehensive data for verification of theoretical models of different solids.Here,we present the results of an experiment in which the evolution of the coupled elastic-plastic wave structure in diamond was directly observed and studied with submicrometer spatial resolution,using the unique capabilities of the x-ray free-electron laser(XFEL).The direct measurements allowed,for the first time,the fitting and validation of the 2D failure model for diamond in the range of several Mbar.Our experimental approach opens new possibilities for the direct verification and construction of equations of state of matter in the ultra-high-stress range,which are relevant to solving a variety of problems in high-energy-density physics.

A new method for precise optical measurements of the sub-micron height of levitation of droplet clusters

Droplet clusters levitating over the locally heated water surface are considered a very promising phe-nomenon of microfluidics for the potential use of the droplets as unique microreactors for microbio-logical experiments.A new optical method is suggested for precise measurements of the sub-micron levitation height of single droplets.The method is based on the analysis of variable colors of the inter-ference halo around the droplet.For the first time,it is possible to measure the extremely low downward velocity of droplets,which grow due to steam condensation.This velocity was found to be 5-8 nm/s.The height of the levitation of various droplets just before their coalescence with a layer of water was also determined.Such measurements might be used for the verification of sophisticated models for the droplet levitation to be developed for a very thin layer of humid air under the droplet when the Knudsen effect should be taken into account.

Electrical triggering of earthquakes:results of laboratory experiments at spring-block models

Recently published results of field and laboratory experiments on the seismic/acoustic response to injection of direct current （DC） pulses into the Earth crust or stressed rock samples raised a question on a possibility of electrical earthquake triggering. A physical mechanism of the considered phenomenon is not clear yet in view of the very low current density （10-7-10-s A/m^2） generated by the pulsed power systems at the epicenter depth （5-10 km） of local earthquakes occurred just after the current injection. The paper describes results of laboratory ＂earthquake＂ triggering by DC pulses under conditions of a spring-block model simulated the seismogenic fault. It is experimentally shown that the electric triggering of the laboratory ＂earthquake＂ （sharp slip of a movable block of the spring-block system） is possible only within a range of subcritical state of the system, when the shear stress between the movable and fixed blocks obtains 0.98-0.99 of its critical value. The threshold of electric triggering action is about 20 A/m^2 that is 7-8 orders of magnitude higher than estimated electric current density for Bishkek test site （Northern Tien Shan, Kirghizia） where the seismic response to the man-made electric action was observed. In this connection, the electric triggering phenomena may be explained by contraction of electric current in the narrow conductive areas of the faults and the corresponding increase in current density or by involving the secondary triggering mechanisms like electromagnetic stimulation of conductive fluid migration into the fault area resulted in decrease in the fault strength properties.

A New Method of Measurement of the True Temperature and Emissivity of Non-Black Body Using One Component of Wien’s Spectrum of Thermal Radiation

It is shown that the measurement of only one component of the Wein’s spectrum of thermal radiation in range λT ≤ 3000 (°C μm) is sufficient to estimate the true temperature and spectral emissivity of the selected component with sufficient accuracy, although more than one hundred years this statement was considered as incorrect. The proposed method is based on the formation of the linear dependence of the logarithm of the emissivity of not real wavelengths and artificially generated “virtual” spectral components.

Ignition of nanothermites by a laser diode pulse

Experimental investigation has been carried out for laser ignition and combustion of nanothermites based on aluminum and oxides of copper,bismuth and molybdenum.Ultrasonic mixing of nanosized powders was used to produce compositions.For thermite ignition,initiating laser pulse with a maximum intensity of 770 W/cm2 was generated by a laser diode with a wavelength of 808 nm.The ignition delay times,the minimum initiation energy density,and the average burning rate at various thermite densities and mass fractions of components were determined by recording the emission of radiation of the reaction products using a multichannel pyrometer jointly with a high-speed video camera.The effect of adding carbon black on the threshold parameters of a laser pulse was also studied.Based on the obtained results,certain assumptions were put forward with regard to the mechanism of nanothermites’ignition by laser radiation and their burning.In particular,the assumptions were made on the two-stage process of the reaction initiation and jet burning mechanism of porous nanothermites.

X-ray spectroscopy evidence for plasma shell formation in experiments modeling accretion columns in young stars

Recent achievements in laboratory astrophysics experiments with high-power lasers have allowed progress in our understanding of the early stages of star formation.In particular,we have recently demonstrated the possibility of simulating in the laboratory the process of the accretion of matter on young stars[G.Revet et al.,Sci.Adv.3,e1700982(2017)].The present paper focuses on x-ray spectroscopy methods that allow us to investigate the complex plasma hydrodynamics involved in such experiments.We demonstrate that we can infer the formation of a plasma shell,surrounding the accretion column at the location of impact with the stellar surface,and thus resolve the present discrepancies between mass accretion rates derived from x-ray and optical-radiation astronomical observations originating from the same object.In our experiments,the accretion column ismodeled by having a collimated narrow(1 mm diameter)plasma stream first propagate along the lines of a large-scale external magnetic field and then impact onto an obstacle,mimicking the high-density region of the stellar chromosphere.A combined approach using steady-state and quasi-stationarymodels was successfully applied tomeasure the parameters of the plasma all along its propagation,at the impact site,and in the structure surrounding the impact region.The formation of a hot plasma shell,surrounding the denser and colder core,formed by the incoming stream of matter is observed near the obstacle using x-ray spatially resolved spectroscopy.

Optimization of a laser plasma-based x-ray source according to WDM absorption spectroscopy requirements

X-ray absorption spectroscopy is a well-accepted diagnostic for experimental studies of warm dense matter.It requires a short-lived X-ray source of sufficiently high emissivity and without characteristic lines in the spectral range of interest.In the present work,we discuss how to choose an optimum material and thickness to get a bright source in the wavelength range 2A–6A(∼2 keV to 6 keV)by considering relatively low-Z elements.We demonstrate that the highest emissivity of solid aluminum and silicon foil targets irradiated with a 1-ps high-contrast sub-kJ laser pulse is achieved when the target thickness is close to 10μm.An outer plastic layer can increase the emissivity even further.

Precise wavelength measurements of potassium He- and Li-like satellites emitted from the laser plasma of a mineral target

Atomic models of high-Zmulticharged ions are extremely complex and require experimental validation.Oneway to do so is to crosscheck the predicted wavelengths of resonance transitions in He-and Li-like ions against precise spectroscopic measurements that use the spectral lines of H-like ions for spectra calibration;these reference data can be modeled with outstanding precision.However,for elements with Z of at least 15,it is quite difficult to create a hot dense plasma with a large concentration ofH-like charge states.To mitigate this issue,the suggestion here is to use as laser targets particular minerals comprising elements with moderate(between 15 and 30)and low(less than 15)Z,with emission from the latter delivering perfect reference lines over a whole range o fHe-and Li-like moderate-Z emission under examination.This approach is implemented to measure the wavelengths of resonance transitions(1snp→1s^(2) for n=2,3)in He-likeKions and their dielectronic satellites by irradiating plates of orthoclase(KAlSi_(3)O_(8))with0.5-kJ subnanosecond laser pulses.X-ray spectra of the laser-generated plasma contain the investigated lines of highly charged K-ions together with precisely known reference lines of H-like Al and Si atoms.The K-shell spectral line wavelengths are measured with a precision of around 0.3 mA.

Thermodynamic Properties of Li-LiH (LiD, LiT) Systems. The Phase Diagram

The paper presents a comprehensive critical review and detailed analysis of the literature, published in the field of the phase diagram solution Li-LiH (LiD, LiT). Special attention is paid to the completeness of the source information on the paper’s topic resulting in an extended reference list. Particularly, paper reviews rarely used sources including little-known publications from research centers, proceedings of the international scientific meetings and dissertations. These publications were more thoroughly analyzed in order to make the information available to the scientific society.

Alignment of solid targets under extreme tight focus conditions generated by an ellipsoidal plasma mirror

The design of ellipsoidal plasma mirrors(EPMs)for the PEARL laser facility is presented.The EPMs achieve a magnification of 0.32 in focal spot size,and the corresponding increase in focused intensity is expected to be about 8.Designing and implementing such focusing optics for short-pulse(<100 fs)systems paves the way for their use in future high-power facilities,where they can be used to achieve intensities beyond 1023W/cm^(2).A retro-imaging-based target alignment system is also described,which is used to align solid targets at the output of the ellispoidal mirrors(with a numerical aperture of 0.75 in this case).

Analysis of non-ionized substance losses in experiments on plasma mass separation

Plasma mass separation requires a lot of diagnostic techniques that not only demonstrate the separation effect but also show the efficiency of the process.During the test experiments,plasma flux to be separated may contain neutral particles that avoid the separation process due to their insensitivity to electromagnetic field.We present the diagnostics of the lost substance in experiments on plasma mass separation.The obtained data of the diagnostics helps determine the law of particle evaporation from the plasma source.We show that neutral flux is unable to distort the result of separation diagnostics.The presented approach can be used in experiments aimed at enhancing the separation effect and achieving target productivity for industry applications.