Monodisperse hollow polymer microspheres having various functional groups on the shell-layer, such as carboxylic acid, pyridyl and amide, were prepared by two-stage distillation precipitation polymerization in neat ac...Monodisperse hollow polymer microspheres having various functional groups on the shell-layer, such as carboxylic acid, pyridyl and amide, were prepared by two-stage distillation precipitation polymerization in neat acetonitrile in the absence of any stabilizer or additive, during which monodisperse poly(methacrylic acid) (PMAA) afforded from the first-stage polymerization was utilized as the seeds for the second-stage polymerization. The shell layer with different functional groups was formed during the second-stage copolymerization of either divinylbenzene (DVB) or ethyleneglycol dimethacrylate (EGDMA) as crosslinker and the functional comonomers, in which the hydrogen-bonding interaction between the carboxylic acid group of PMAA core and the functional groups of the corresponding comonomers, including carboxylic acid, amide and pyridyl, played an essential role for the formation of monodisperse core-shell functional microspheres. The hollow polymer microspheres were then developed after the subsequent removal of PMAA cores by dissolution in ethanol under basic condition. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used to determine the morphology of the resultant PMAA core, functional core-shell microspheres and the corresponding hollow polymer microspheres with different functional groups. FT-IR spectra confirmed the successful incorporation of the various functional groups on the shell layer of the hollow polymer microspheres.展开更多
Two-dimensional carbon-based materials have shown promising electromagnetic wave absorption capabilities in mid-and high-frequency ranges,but face challenges in low-frequency absorption due to limited control over pol...Two-dimensional carbon-based materials have shown promising electromagnetic wave absorption capabilities in mid-and high-frequency ranges,but face challenges in low-frequency absorption due to limited control over polarization response mecha-nisms and ambiguous resonance behavior.In this study,we pro-pose a novel approach to enhance absorption efficiency in aligned three-dimensional(3D)MXene/CNF(cellulose nanofibers)cavities by modifying polarization properties and manipulating resonance response in the 3D MXene architecture.This controlled polarization mechanism results in a significant shift of the main absorption region from the X-band to the S-band,leading to a remarkable reflection loss value of-47.9 dB in the low-frequency range.Furthermore,our findings revealed the importance of the oriented electromagnetic coupling in influencing electromagnetic response and microwave absorption properties.The present study inspired us to develop a generic strategy for low-frequency tuned absorption in the absence of magnetic element participation,while orientation-induced polarization and the derived magnetic resonance coupling are the key controlling factors of the method.展开更多
A new functional glycomonomer was obtained from modified glucosamine. Hemoglobin-imprinted polymer gel was prepared with allyl-bromide modified glucosamine as functional monomer, poly(ethylene-glycol)diacrylate (PE...A new functional glycomonomer was obtained from modified glucosamine. Hemoglobin-imprinted polymer gel was prepared with allyl-bromide modified glucosamine as functional monomer, poly(ethylene-glycol)diacrylate (PEGDA) as cross-linker and ammonium persulfate [(NHn)2S2O8]/sodium hydrogen sulfite (NaHSO3) as initiators in a phosphate buffer. The adsorption capacity and selective adsorption of the molecular imprinting polymer (MIP) were also discussed.展开更多
Divinylbenzene-80 (DVB-80) and polar monomer acrylic acid (AA) having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2'-azobis(isobu...Divinylbenzene-80 (DVB-80) and polar monomer acrylic acid (AA) having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2'-azobis(isobutyronitrile) (AIBN) as initiator. The experiments were investigated from a two-dimensional matrix, i.e., the actual crosslinking degree of DVB varying from 0 to 80% and the solvent composition varying from 0 to 100% of toluene mixture with acetonitrile, when the mixture of acetonitrile and toluene was used as the reaction solvent. Under various reaction conditions, six distinct morphologies including soluble polymers, swellable microgels, coagulum, irregular microparticles, and nano-/micrometer microspheres were formed and the structures of these polymer architectures were described. A morphological map was utilized to discuss the effects of both crosslinking degree of DVB and composition of solvent on the transitions between morphology domains. The results demonstrated that the microspheres are formed by an internal contraction due to the marginal solvency of the continuous phase and the crosslinking of the polymer network through the covalent bonding from DVB as well as the interchain hydrogen-bonding between the carboxylic acid units.展开更多
Monodisperse poly(poly(ethyleneglycol) methyl ether acrylate-co-acrylic acid) (poly(PEGMA-co-AA)) microspheres were prepared by distillation-precipitation polymerization with divinylbenzene (DVB) as crosslin...Monodisperse poly(poly(ethyleneglycol) methyl ether acrylate-co-acrylic acid) (poly(PEGMA-co-AA)) microspheres were prepared by distillation-precipitation polymerization with divinylbenzene (DVB) as crosslinker with 2,2'- azobisisobutyronitrile (AIBN) as initiator in neat acetonitrile without stirring. Under various reaction conditions, four distinct morphologies including the sol, microemulsion, microgels and microspheres were formed during the distillation of the solvent from the reaction system. A 2D morphological map was established as a function of crosslinker concentration and the polar monomer AA concentration, in comonomer feed in the transition between the morphology domains. The effect of the covalent crosslinker DVB on the morphology of the polymer network was investigated in detail at AA fraction of 40 vol%. The ratios of acid to ethylene oxide units presenting in the comonomers dramatically affected the polymer-polymer interaction and hence the morphology of the resultant polymer network. The covalent crosslinking by DVB and the hydrogen bonding crosslinking between two acid units as well as between the acid and ethylene oxide unit played key roles in the formation of monodisperse polymer microspheres.展开更多
Narrow disperse poly(ethyleneglycol dimethacrylate-co-4-vinylpyridine) (poly(EGDMA-co-4-VPy)) microspheres were prepared by distillation-precipitation copolymerization of ethyleneglycol dimethacrylate (EGDMA) ...Narrow disperse poly(ethyleneglycol dimethacrylate-co-4-vinylpyridine) (poly(EGDMA-co-4-VPy)) microspheres were prepared by distillation-precipitation copolymerization of ethyleneglycol dimethacrylate (EGDMA) and 4-vinylpyridine (4-VPy) with 2,2'-azobisisobutyronitrile (AIBN) as initiator in neat acetonitrile. The polymer microspheres containing pyridyl group were then utilized as stabilizer for gold metallic colloids with the diameter around 7 nm, which were prepared by the in situ reduction of gold chloride trihydrate with sodium borohydride through the coordination of the pyridyl group on the gel layer and surface of the microsphere with the gold metallic nano-particles. The catalytic properties of the pyridyl- functionalized microsphere-stabilized gold metallic colloids and the behavior of the stabilized-catalyst for the recycling were investigated with reduction of 4-nitrophenol to 4-aminophenol as a model reaction.展开更多
A facile one-pot synthesis of solid polymer electrolytes(SPEs), composed of carbonate terminated poly(ethylene glycol)(CH3O-PEG-IC), poly(ethylene glycol)-block-polystyrene(PEG-b-PS) block copolymer nanoparticles cont...A facile one-pot synthesis of solid polymer electrolytes(SPEs), composed of carbonate terminated poly(ethylene glycol)(CH3O-PEG-IC), poly(ethylene glycol)-block-polystyrene(PEG-b-PS) block copolymer nanoparticles containing a conductive PEG corona, fumed SiO2 and Li TFSI salt via polymerization-induced self-assembly is proposed. This method to prepare SPEs has the advantages of one-pot convenient synthesis, avoiding use of organic solvent and conveniently adding inorganic additives. CH3O-PEG-IC combines advantages of PEG and polycarbonate, the in situ synthesized PEG-b-PS nanoparticles containing a rigid polystyrene(PS) core and a PEG corona guarantee continuous lithium ion transport in the synthesized SPEs, and the fumed SiO2 optimizes the interfacial properties and improves the electrochemical stability, all of which afford SPEs a well considerable room temperature ionic conductivity of 1.73 × 10^-4S/cm, high lithium transference number of 0.53, and wide electrochemical stability window of 5.5 V(vs. Li^+/Li). By employing these SPEs, the assembled solid state cells of Li FePO4 |SPEs|Li exhibit considerable cell performance.展开更多
Reversible addition-fragmentation transfer (RAPT) miniemulsion polymerizations for PMMA with cumyl dithiobenzoate (CDB) as a chain transfer agent (CTA) has been carried out. Higher temperature made the polymeriz...Reversible addition-fragmentation transfer (RAPT) miniemulsion polymerizations for PMMA with cumyl dithiobenzoate (CDB) as a chain transfer agent (CTA) has been carried out. Higher temperature made the polymerization much faster and the PDI remained below 1.20, when the temperature was upon 70 ℃.展开更多
The self-assembly of symmetric diblock copolymers confined in the channels of variously shaped cross sections (regu- lar triangles, squares, and ellipses) is investigated using a simulated annealing technique. In th...The self-assembly of symmetric diblock copolymers confined in the channels of variously shaped cross sections (regu- lar triangles, squares, and ellipses) is investigated using a simulated annealing technique. In the bulk, the studied symmetric diblock copolymers form a lamellar structure with period LL. The geometry and surface property of the confining channels have a large effect on the self-assembled structures and the orientation of the lamellar structures. Stacked perpendicular lamellae with period LL are observed for neutral surfaces regardless of the channel shape and size, but each lamella is in the shape of the corresponding channel's cross section. In the case of triangle-shaped cross sections, stacked parallel lamel- lae are the majority morphologies for weakly selective surfaces, while morphologies including a triangular-prism-shaped B-cylinder and multiple tridentate lamellae are obtained for strongly selective surfaces. In the cases of square-shaped and ellipse-shaped cross sections, concentric lamellae are the signature morphology for strongly selective surfaces, whereas for weakly selective surfaces, stacked parallel lamellae, and several types of folding lamellae are obtained in the case of square-shaped cross sections, and stacked parallel lamellae are the majority morphologies in the case of ellipse-shaped cross sections when the length of the minor axis is commensurate with the bulk lamellar period. The mean-square end- to-end distance, the average contact number between different species and the surface concentration of the A-monomers are computed to elucidate the mechanisms of the formation of the different morphologies. It is found that the resulting morphology is a consequence of competition among the chain stretching, interfacial energy, and surface energy. Our results suggest that the self-assembled morphology and the orientation of lamellae can be manipulated by the shape, the size, and the surface property of the confining channels.展开更多
Spherical macroporous copolymers of methyl acrylate and trimethylolpropane triacrylate with different surface and pore structure were synthesized via suspension polymerization. and their surface and pore structure wer...Spherical macroporous copolymers of methyl acrylate and trimethylolpropane triacrylate with different surface and pore structure were synthesized via suspension polymerization. and their surface and pore structure were characterized by measurements of surface area, apparent density and skeleton density and calculation of average pore diameter The results revealed that crosslinking degree and porogent determined the physical structure of these copolymers. Some of the copolymers were applied to adsorptive purification of ginkgo leaves extract to enhance the content of flavonoids, the results showed that most of the copolymers could be used to increase the flavonoids content.展开更多
The uniform surface ion-imprinted resins for Zn2+ as the imprinting guest were prepared by emulsifier-free emulsion polymerization utilizing ally phenyl hydrogenphosphate as a functional comonomer. The Zn2+-imprinted ...The uniform surface ion-imprinted resins for Zn2+ as the imprinting guest were prepared by emulsifier-free emulsion polymerization utilizing ally phenyl hydrogenphosphate as a functional comonomer. The Zn2+-imprinted resin adsorbed Zn2+ much more effectively than did the unimprinted one. The selective feature of the surface imprinted resins to the template ions was demonstrated.展开更多
The diblock copolymers intercalated layered silicate was prepared via a melt dispersion technique. Then the effect of intercalated hybrid as filler on acrylonitrile- butadiene-styrene resin was characterized by X-ray ...The diblock copolymers intercalated layered silicate was prepared via a melt dispersion technique. Then the effect of intercalated hybrid as filler on acrylonitrile- butadiene-styrene resin was characterized by X-ray diffraction, transmission electron microscopy, stress-strain measurements in elongation.展开更多
The goal of this paper was to reveal the feasibility of chloromethylation of polymers made from technical divinylbenzene so as to introduce functional groups into polymeric adsorbents. For this study, the factors that...The goal of this paper was to reveal the feasibility of chloromethylation of polymers made from technical divinylbenzene so as to introduce functional groups into polymeric adsorbents. For this study, the factors that effect the chloromethylation reaction, such as the pore structure of the polymer, the ratio of the reactants to catalyst, the reaction temperature and reaction time and so on were investigated, and the pore structure and property of the chloromethylated polymers were studied. The results showed that polymers of technical divinylbenzene could be chloromethylated successfully, and the adsorptive property of the chloromethylated resin was different from that of the initial resin.展开更多
Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2...Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.展开更多
Heteroatom-doped carbon-based transition-metal single-atom catalysts(SACs) are promising electrocatalysts for oxygen reduction reaction(ORR). Herein, with the aid of hierarchically porous silica as hard template, a fa...Heteroatom-doped carbon-based transition-metal single-atom catalysts(SACs) are promising electrocatalysts for oxygen reduction reaction(ORR). Herein, with the aid of hierarchically porous silica as hard template, a facile and general melting perfusion and mesopore-confined pyrolysis method was reported to prepare single-atomic Fe/N–S-doped carbon catalyst(FeNx/NC-S) with hierarchically porous structure and well-defined morphology. The FeNx/NC-S exhibited excellent ORR activity with a half-wave potential(E_(1/2)) of 0.92 V, and a lower overpotential of 320 mV at a current density of 10 mA cm^(-2)for OER under alkaline condition. The remarkable electrocatalysis performance can be attributed to the hierarchically porous carbon nanospheres with S doping and high content of Fe-Nx sites(up to 3.7 wt% of Fe), resulting from the nano-confinement effect of the hierarchically porous silica spheres(NKM-5) during the pyrolysis process. The rechargeable Zn-air battery with FeNx/NC-S as a cathode catalyst demonstrated a superior power density of 194.5 mW cm-2charge–discharge stability. This work highlights a new avenue to design advanced SACs for efficient sustainable energy storage and conversion.展开更多
Spherical macroporous adsorbents with active sites capable of hydrogen bonding adsorption based on urea-formaldehyde condensed polymer were synthesized via reversed suspension polymerization. The properties of the obt...Spherical macroporous adsorbents with active sites capable of hydrogen bonding adsorption based on urea-formaldehyde condensed polymer were synthesized via reversed suspension polymerization. The properties of the obtained adsorbent were also investigated in detail. The results showed that the water permeability could be improved by adding hydroxyl-containing organic compound moiety into the adsorbent. The specific surface area and average pore diameter of these adsorbents increased while the porosity first increased then decreased with the increase of the amount of the added hydroxyl-containing compound.展开更多
Controlled polymerization of N-n-propylacrylamide was achieved by atom transfer radical polymerization(ATRP) in a N,N-dimethylformamide-water mixture(50 vol%)at room temperature with methyl 2-chloropropinonate as init...Controlled polymerization of N-n-propylacrylamide was achieved by atom transfer radical polymerization(ATRP) in a N,N-dimethylformamide-water mixture(50 vol%)at room temperature with methyl 2-chloropropinonate as initiator and CuCl/tris(2-dimethylaminoethyl)amine as the catalytic system in a ratio of 1:1:1.High molecular weight homopolymers(up to 3.7×10~4)with narrow molecular weight distribution(less than 1.2)were obtained.The living character of the polymerization was further demonstrated by self-blocking...展开更多
Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl...Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl chloride as the reaction termi-nating agent. The polymer was characterized by FTIR and SEC. The emulsifier-free emul-sion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containingvarious concentrations of PEO-A was studied. In all cases stable emulsion coplymerizationsof MMA and BA were obtained. The stabilizing effect was found to be dependent on themolecular weight and the feed amount of the macromonomer.展开更多
The synthesis and characterization of a series of novel comb-like polymethacrylates bearing heterocyclic azo group and mesogenic group are described. The thermal properties of the polymers such as thermal stability an...The synthesis and characterization of a series of novel comb-like polymethacrylates bearing heterocyclic azo group and mesogenic group are described. The thermal properties of the polymers such as thermal stability and phase transition behavior were investigated by thermogravimetric analysis, differential thermal analysis and polarizing optical microscopy techniques. The experimental results show that all the synthesized polymers do not exhibit liquid crystallinity except the homopolymer of the mesogenic monomer MAPB2 and the glass transition temperatures of the polymers increase with increasing content of azo moiety in polymers linearly.展开更多
In the course of investigating the catalytic behavior of metal complexes for ring opening metathesis polymerization of cycloolefins, metathesis, hydroformylation and selective hydrogenation of olefins experimental res...In the course of investigating the catalytic behavior of metal complexes for ring opening metathesis polymerization of cycloolefins, metathesis, hydroformylation and selective hydrogenation of olefins experimental results time and again indicate the presence of effects of macromolecular supports - the utilization of macromolecular supports increases obviously the activity, selectivity, and stability of the catalysts and so as to increase the conversion of substrates, yields of reactions, properties of formed polymers and so on. Discussed these effects on the basis of the authors' experiments. (Author abstract) 18 Refs.展开更多
基金supported by the National Natural Science Foundation of China(No.20874049)
文摘Monodisperse hollow polymer microspheres having various functional groups on the shell-layer, such as carboxylic acid, pyridyl and amide, were prepared by two-stage distillation precipitation polymerization in neat acetonitrile in the absence of any stabilizer or additive, during which monodisperse poly(methacrylic acid) (PMAA) afforded from the first-stage polymerization was utilized as the seeds for the second-stage polymerization. The shell layer with different functional groups was formed during the second-stage copolymerization of either divinylbenzene (DVB) or ethyleneglycol dimethacrylate (EGDMA) as crosslinker and the functional comonomers, in which the hydrogen-bonding interaction between the carboxylic acid group of PMAA core and the functional groups of the corresponding comonomers, including carboxylic acid, amide and pyridyl, played an essential role for the formation of monodisperse core-shell functional microspheres. The hollow polymer microspheres were then developed after the subsequent removal of PMAA cores by dissolution in ethanol under basic condition. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used to determine the morphology of the resultant PMAA core, functional core-shell microspheres and the corresponding hollow polymer microspheres with different functional groups. FT-IR spectra confirmed the successful incorporation of the various functional groups on the shell layer of the hollow polymer microspheres.
基金financial support from National Key R&D Program of China(MoST,2020YFA0711500)the National Natural Science Foundation of China(NSFC,21875114),(NSFC,52303348)+1 种基金111 Project(B18030)“The Fundamental Research Funds for the Central Universities”,Nankai University.
文摘Two-dimensional carbon-based materials have shown promising electromagnetic wave absorption capabilities in mid-and high-frequency ranges,but face challenges in low-frequency absorption due to limited control over polarization response mecha-nisms and ambiguous resonance behavior.In this study,we pro-pose a novel approach to enhance absorption efficiency in aligned three-dimensional(3D)MXene/CNF(cellulose nanofibers)cavities by modifying polarization properties and manipulating resonance response in the 3D MXene architecture.This controlled polarization mechanism results in a significant shift of the main absorption region from the X-band to the S-band,leading to a remarkable reflection loss value of-47.9 dB in the low-frequency range.Furthermore,our findings revealed the importance of the oriented electromagnetic coupling in influencing electromagnetic response and microwave absorption properties.The present study inspired us to develop a generic strategy for low-frequency tuned absorption in the absence of magnetic element participation,while orientation-induced polarization and the derived magnetic resonance coupling are the key controlling factors of the method.
基金the National Natural Science Foundation of China(No.50673044)for financial support.
文摘A new functional glycomonomer was obtained from modified glucosamine. Hemoglobin-imprinted polymer gel was prepared with allyl-bromide modified glucosamine as functional monomer, poly(ethylene-glycol)diacrylate (PEGDA) as cross-linker and ammonium persulfate [(NHn)2S2O8]/sodium hydrogen sulfite (NaHSO3) as initiators in a phosphate buffer. The adsorption capacity and selective adsorption of the molecular imprinting polymer (MIP) were also discussed.
基金The work was supported by the National Natural Science Foundation of China (Nos. 20274018 and 20504015)the starting-up foundation from Nankai University and Ministry of Education, China.
文摘Divinylbenzene-80 (DVB-80) and polar monomer acrylic acid (AA) having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2'-azobis(isobutyronitrile) (AIBN) as initiator. The experiments were investigated from a two-dimensional matrix, i.e., the actual crosslinking degree of DVB varying from 0 to 80% and the solvent composition varying from 0 to 100% of toluene mixture with acetonitrile, when the mixture of acetonitrile and toluene was used as the reaction solvent. Under various reaction conditions, six distinct morphologies including soluble polymers, swellable microgels, coagulum, irregular microparticles, and nano-/micrometer microspheres were formed and the structures of these polymer architectures were described. A morphological map was utilized to discuss the effects of both crosslinking degree of DVB and composition of solvent on the transitions between morphology domains. The results demonstrated that the microspheres are formed by an internal contraction due to the marginal solvency of the continuous phase and the crosslinking of the polymer network through the covalent bonding from DVB as well as the interchain hydrogen-bonding between the carboxylic acid units.
基金This work was supported in part by the National Science Foundation of China (No. 20504015)the starting project for young teachers from the Ministry of Education, China.
文摘Monodisperse poly(poly(ethyleneglycol) methyl ether acrylate-co-acrylic acid) (poly(PEGMA-co-AA)) microspheres were prepared by distillation-precipitation polymerization with divinylbenzene (DVB) as crosslinker with 2,2'- azobisisobutyronitrile (AIBN) as initiator in neat acetonitrile without stirring. Under various reaction conditions, four distinct morphologies including the sol, microemulsion, microgels and microspheres were formed during the distillation of the solvent from the reaction system. A 2D morphological map was established as a function of crosslinker concentration and the polar monomer AA concentration, in comonomer feed in the transition between the morphology domains. The effect of the covalent crosslinker DVB on the morphology of the polymer network was investigated in detail at AA fraction of 40 vol%. The ratios of acid to ethylene oxide units presenting in the comonomers dramatically affected the polymer-polymer interaction and hence the morphology of the resultant polymer network. The covalent crosslinking by DVB and the hydrogen bonding crosslinking between two acid units as well as between the acid and ethylene oxide unit played key roles in the formation of monodisperse polymer microspheres.
基金This work was supported in part by the National Science Foundation of China(No.20504015)the Opening Research Fund from the State Key Laboratory of Polymer Chemistry and Physics,Chinese Academy of Sciences(No.200613).
文摘Narrow disperse poly(ethyleneglycol dimethacrylate-co-4-vinylpyridine) (poly(EGDMA-co-4-VPy)) microspheres were prepared by distillation-precipitation copolymerization of ethyleneglycol dimethacrylate (EGDMA) and 4-vinylpyridine (4-VPy) with 2,2'-azobisisobutyronitrile (AIBN) as initiator in neat acetonitrile. The polymer microspheres containing pyridyl group were then utilized as stabilizer for gold metallic colloids with the diameter around 7 nm, which were prepared by the in situ reduction of gold chloride trihydrate with sodium borohydride through the coordination of the pyridyl group on the gel layer and surface of the microsphere with the gold metallic nano-particles. The catalytic properties of the pyridyl- functionalized microsphere-stabilized gold metallic colloids and the behavior of the stabilized-catalyst for the recycling were investigated with reduction of 4-nitrophenol to 4-aminophenol as a model reaction.
基金supported by the National Science Foundation for Distinguished Young Scholars (No. 21525419)the National Natural Science Foundation of China (No. 21474054)the National Key Research and Development Program of China (No. 2016YFA0202503)
文摘A facile one-pot synthesis of solid polymer electrolytes(SPEs), composed of carbonate terminated poly(ethylene glycol)(CH3O-PEG-IC), poly(ethylene glycol)-block-polystyrene(PEG-b-PS) block copolymer nanoparticles containing a conductive PEG corona, fumed SiO2 and Li TFSI salt via polymerization-induced self-assembly is proposed. This method to prepare SPEs has the advantages of one-pot convenient synthesis, avoiding use of organic solvent and conveniently adding inorganic additives. CH3O-PEG-IC combines advantages of PEG and polycarbonate, the in situ synthesized PEG-b-PS nanoparticles containing a rigid polystyrene(PS) core and a PEG corona guarantee continuous lithium ion transport in the synthesized SPEs, and the fumed SiO2 optimizes the interfacial properties and improves the electrochemical stability, all of which afford SPEs a well considerable room temperature ionic conductivity of 1.73 × 10^-4S/cm, high lithium transference number of 0.53, and wide electrochemical stability window of 5.5 V(vs. Li^+/Li). By employing these SPEs, the assembled solid state cells of Li FePO4 |SPEs|Li exhibit considerable cell performance.
文摘Reversible addition-fragmentation transfer (RAPT) miniemulsion polymerizations for PMMA with cumyl dithiobenzoate (CDB) as a chain transfer agent (CTA) has been carried out. Higher temperature made the polymerization much faster and the PDI remained below 1.20, when the temperature was upon 70 ℃.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11204215,51302187,20990234,20925414,21204040,and 91227121)the Natural Science Foundation of Tianjin City,China(Grant Nos.12JCYBJC32500 and 14JCZDJC32100)+1 种基金the Program for Changjiang Scholars and Innovative Research Team in University(PCSIRT)(Grant No.IRT1257)the 111 Project.A.C.Shi gratefully acknowledges the supports from the Natural Sciences and Engineering Research Council(NSERC)of Canada
文摘The self-assembly of symmetric diblock copolymers confined in the channels of variously shaped cross sections (regu- lar triangles, squares, and ellipses) is investigated using a simulated annealing technique. In the bulk, the studied symmetric diblock copolymers form a lamellar structure with period LL. The geometry and surface property of the confining channels have a large effect on the self-assembled structures and the orientation of the lamellar structures. Stacked perpendicular lamellae with period LL are observed for neutral surfaces regardless of the channel shape and size, but each lamella is in the shape of the corresponding channel's cross section. In the case of triangle-shaped cross sections, stacked parallel lamel- lae are the majority morphologies for weakly selective surfaces, while morphologies including a triangular-prism-shaped B-cylinder and multiple tridentate lamellae are obtained for strongly selective surfaces. In the cases of square-shaped and ellipse-shaped cross sections, concentric lamellae are the signature morphology for strongly selective surfaces, whereas for weakly selective surfaces, stacked parallel lamellae, and several types of folding lamellae are obtained in the case of square-shaped cross sections, and stacked parallel lamellae are the majority morphologies in the case of ellipse-shaped cross sections when the length of the minor axis is commensurate with the bulk lamellar period. The mean-square end- to-end distance, the average contact number between different species and the surface concentration of the A-monomers are computed to elucidate the mechanisms of the formation of the different morphologies. It is found that the resulting morphology is a consequence of competition among the chain stretching, interfacial energy, and surface energy. Our results suggest that the self-assembled morphology and the orientation of lamellae can be manipulated by the shape, the size, and the surface property of the confining channels.
基金Supported by the National Natural Science Foundation of China !(Grant No. 29574164)
文摘Spherical macroporous copolymers of methyl acrylate and trimethylolpropane triacrylate with different surface and pore structure were synthesized via suspension polymerization. and their surface and pore structure were characterized by measurements of surface area, apparent density and skeleton density and calculation of average pore diameter The results revealed that crosslinking degree and porogent determined the physical structure of these copolymers. Some of the copolymers were applied to adsorptive purification of ginkgo leaves extract to enhance the content of flavonoids, the results showed that most of the copolymers could be used to increase the flavonoids content.
基金Financial supported by the Natural Science Foundation of China (No: 50003006)
文摘The uniform surface ion-imprinted resins for Zn2+ as the imprinting guest were prepared by emulsifier-free emulsion polymerization utilizing ally phenyl hydrogenphosphate as a functional comonomer. The Zn2+-imprinted resin adsorbed Zn2+ much more effectively than did the unimprinted one. The selective feature of the surface imprinted resins to the template ions was demonstrated.
基金Chinese Education Ministry Foundation for Nankai University and Tianjin University Joint Academy
文摘The diblock copolymers intercalated layered silicate was prepared via a melt dispersion technique. Then the effect of intercalated hybrid as filler on acrylonitrile- butadiene-styrene resin was characterized by X-ray diffraction, transmission electron microscopy, stress-strain measurements in elongation.
文摘The goal of this paper was to reveal the feasibility of chloromethylation of polymers made from technical divinylbenzene so as to introduce functional groups into polymeric adsorbents. For this study, the factors that effect the chloromethylation reaction, such as the pore structure of the polymer, the ratio of the reactants to catalyst, the reaction temperature and reaction time and so on were investigated, and the pore structure and property of the chloromethylated polymers were studied. The results showed that polymers of technical divinylbenzene could be chloromethylated successfully, and the adsorptive property of the chloromethylated resin was different from that of the initial resin.
文摘Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.
基金supported by National Natural Science Foundation of China (21773128)。
文摘Heteroatom-doped carbon-based transition-metal single-atom catalysts(SACs) are promising electrocatalysts for oxygen reduction reaction(ORR). Herein, with the aid of hierarchically porous silica as hard template, a facile and general melting perfusion and mesopore-confined pyrolysis method was reported to prepare single-atomic Fe/N–S-doped carbon catalyst(FeNx/NC-S) with hierarchically porous structure and well-defined morphology. The FeNx/NC-S exhibited excellent ORR activity with a half-wave potential(E_(1/2)) of 0.92 V, and a lower overpotential of 320 mV at a current density of 10 mA cm^(-2)for OER under alkaline condition. The remarkable electrocatalysis performance can be attributed to the hierarchically porous carbon nanospheres with S doping and high content of Fe-Nx sites(up to 3.7 wt% of Fe), resulting from the nano-confinement effect of the hierarchically porous silica spheres(NKM-5) during the pyrolysis process. The rechargeable Zn-air battery with FeNx/NC-S as a cathode catalyst demonstrated a superior power density of 194.5 mW cm-2charge–discharge stability. This work highlights a new avenue to design advanced SACs for efficient sustainable energy storage and conversion.
基金uported by the National Natural Science Foundation of China !(Grant No. 29574164)
文摘Spherical macroporous adsorbents with active sites capable of hydrogen bonding adsorption based on urea-formaldehyde condensed polymer were synthesized via reversed suspension polymerization. The properties of the obtained adsorbent were also investigated in detail. The results showed that the water permeability could be improved by adding hydroxyl-containing organic compound moiety into the adsorbent. The specific surface area and average pore diameter of these adsorbents increased while the porosity first increased then decreased with the increase of the amount of the added hydroxyl-containing compound.
基金This work was supported by the National Natural Science Foundation of China through Young Investigator Award(No.20328407)Nankai University,and the Canada Research Chair program.
文摘Controlled polymerization of N-n-propylacrylamide was achieved by atom transfer radical polymerization(ATRP) in a N,N-dimethylformamide-water mixture(50 vol%)at room temperature with methyl 2-chloropropinonate as initiator and CuCl/tris(2-dimethylaminoethyl)amine as the catalytic system in a ratio of 1:1:1.High molecular weight homopolymers(up to 3.7×10~4)with narrow molecular weight distribution(less than 1.2)were obtained.The living character of the polymerization was further demonstrated by self-blocking...
文摘Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl chloride as the reaction termi-nating agent. The polymer was characterized by FTIR and SEC. The emulsifier-free emul-sion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containingvarious concentrations of PEO-A was studied. In all cases stable emulsion coplymerizationsof MMA and BA were obtained. The stabilizing effect was found to be dependent on themolecular weight and the feed amount of the macromonomer.
文摘The synthesis and characterization of a series of novel comb-like polymethacrylates bearing heterocyclic azo group and mesogenic group are described. The thermal properties of the polymers such as thermal stability and phase transition behavior were investigated by thermogravimetric analysis, differential thermal analysis and polarizing optical microscopy techniques. The experimental results show that all the synthesized polymers do not exhibit liquid crystallinity except the homopolymer of the mesogenic monomer MAPB2 and the glass transition temperatures of the polymers increase with increasing content of azo moiety in polymers linearly.
基金The project was supported by the National Natural Science Foundation of China, "Macromolecular ligand effects of catalytic system for ring opening metathesis polymerization of dicydopentadiene" (Approval No. 29474160) & "Polymeric metal complex catalysts
文摘In the course of investigating the catalytic behavior of metal complexes for ring opening metathesis polymerization of cycloolefins, metathesis, hydroformylation and selective hydrogenation of olefins experimental results time and again indicate the presence of effects of macromolecular supports - the utilization of macromolecular supports increases obviously the activity, selectivity, and stability of the catalysts and so as to increase the conversion of substrates, yields of reactions, properties of formed polymers and so on. Discussed these effects on the basis of the authors' experiments. (Author abstract) 18 Refs.