Cloud point extraction (CPE) with Tergitol TMN-6 was applied for the extraction of trace amounts of palladium (Pd(Ⅱ)), platinum (Pt(Ⅳ)), and gold (Au(Ⅲ)) in the soil of industrial sewage. Ammonium pyrolysine dithio...Cloud point extraction (CPE) with Tergitol TMN-6 was applied for the extraction of trace amounts of palladium (Pd(Ⅱ)), platinum (Pt(Ⅳ)), and gold (Au(Ⅲ)) in the soil of industrial sewage. Ammonium pyrolysine dithiocarbamate (APDC) was adopted as the chelating agent prior to CPE and then was detected by atomic absorption spectrometry (AAS). Different parameters such as the concentration of surfactants, chelating agent and salt, sample pH, equilibration temperature and time, centrifugation time and rates, and the effect of foreign ions were studied. Under optimum conditions, the low limits of detections are 1.4, 2.8 and 1.2 ng·ml^-1 and the enrichment factors are 21, 12, and 24 for Pd(Ⅱ), Pt(Ⅳ), and Au(Ⅲ, respectively. The relative standard deviations vary from 0.6% to 1.0% (n=11). All correlation coefficients of the calibration curves are >0.9960. The proposed method was successfully applied for the determination of Pd(Ⅱ), Pt(Ⅳ), and Au(Ⅲ) in the real soil of industrial sewage samples.展开更多
An modified laminar crystal sodium silicate （A1-SKS-6） was synthesized by spray drying and high temperature crystallization using sodium silicate as silicon source, A1 atom as inorganic source and hexadecyltrimethy ...An modified laminar crystal sodium silicate （A1-SKS-6） was synthesized by spray drying and high temperature crystallization using sodium silicate as silicon source, A1 atom as inorganic source and hexadecyltrimethy ammonium bromide （CTMAB） as the structure template. The hydrothermal stability of product was at least 1 h. The synthesized material was characterized by XRD and SEM. The results indicated that shape and intensity of XRD diffraction peak at 20 took changes, but raw material 8 phase crystal form kept unchanged, and assured high Ca^2＋ and Mg^2＋ binding capacity of the products. The Ca^2＋ and Mg^2＋ binding capacity of product is up to 380 mg Ca/g and 410mg Mg/g respectively. It was found that the hole of product became smaller and appeared rod structure based on SEM. The hydrothermal stability was increased due to the pillaring of AI atom.展开更多
基金supported by the National Natural Science Foundation of China(No.20961012)the Medical Neurobiology Key Laboratory of Kunming University of Science and Technology,Basic and Applied Research Project in Yunnan Province(No.2008ZC082M)+3 种基金the Analysis and Testing Foundation of Kunming University of Science and Technology(No.2010121)Innovation Fund for Smalland Medium Technology Based Firms(No.11C26215305936)Natural and Science Foundation of Yunnan Province(No.2010ZC027)Focus Fund of Department of Education in Yunnan Province(No.2010Z016)
文摘Cloud point extraction (CPE) with Tergitol TMN-6 was applied for the extraction of trace amounts of palladium (Pd(Ⅱ)), platinum (Pt(Ⅳ)), and gold (Au(Ⅲ)) in the soil of industrial sewage. Ammonium pyrolysine dithiocarbamate (APDC) was adopted as the chelating agent prior to CPE and then was detected by atomic absorption spectrometry (AAS). Different parameters such as the concentration of surfactants, chelating agent and salt, sample pH, equilibration temperature and time, centrifugation time and rates, and the effect of foreign ions were studied. Under optimum conditions, the low limits of detections are 1.4, 2.8 and 1.2 ng·ml^-1 and the enrichment factors are 21, 12, and 24 for Pd(Ⅱ), Pt(Ⅳ), and Au(Ⅲ, respectively. The relative standard deviations vary from 0.6% to 1.0% (n=11). All correlation coefficients of the calibration curves are >0.9960. The proposed method was successfully applied for the determination of Pd(Ⅱ), Pt(Ⅳ), and Au(Ⅲ) in the real soil of industrial sewage samples.
文摘An modified laminar crystal sodium silicate （A1-SKS-6） was synthesized by spray drying and high temperature crystallization using sodium silicate as silicon source, A1 atom as inorganic source and hexadecyltrimethy ammonium bromide （CTMAB） as the structure template. The hydrothermal stability of product was at least 1 h. The synthesized material was characterized by XRD and SEM. The results indicated that shape and intensity of XRD diffraction peak at 20 took changes, but raw material 8 phase crystal form kept unchanged, and assured high Ca^2＋ and Mg^2＋ binding capacity of the products. The Ca^2＋ and Mg^2＋ binding capacity of product is up to 380 mg Ca/g and 410mg Mg/g respectively. It was found that the hole of product became smaller and appeared rod structure based on SEM. The hydrothermal stability was increased due to the pillaring of AI atom.
