Sodium dodecyl sulfate (SDS) as an effective corrosion inhibitor for Mg-8Li-3Al alloy in aqueous NaCl: A combined experimental and theoretical investigation

The corrosion inhibition behavior of Mg-8Li-3Al alloy in NaCl solution with sodium dodecyl sulfate(SDS)was investigated by hydrogen analysis,scanning electron microscopy(SEM),electrochemical test,scanning Kelvin probe force microscopy(SKPFM)and computational methods.Results showed that the corrosion resistance of Mg-8Li-3Al alloy in NaCl solution was effectively improved with SDS.The SEM and SKPFM results confirmed a dense,200 nm-thick SDS-adsorbed layer had formed on the alloy surface.The separation energy ΔE_(gap) and adsorption energy E_(ads) of SDS on the Mg surface were calculated by density functional theory and molecular dynamics simulations,respectively.And the corrosion inhibition mechanism was hypothesized and described.

基于偏振激光干涉技术的波长计

提出了一种基于偏振激光干涉技术的波长计，该波长计能在微米行程上实现10^-6的测量精度，位移行程的缩减有效地减小了环境温度、波长漂移、空气折射率对测量精度的影响。给出了两种未知激光源（DL100-Toptica和Nd：YAG）的波长测量值及不确定度值，同时还给出了该波长计与商用波长计的比对结果。

基于相控外差干涉技术的纳米定位方法的研究

针对工业领域和计量界对定位精度要求的提高,提出了一种基于迈克尔逊干涉仪反向特性的定位控制方法。该方法采用相位锁定控制和外差干涉技术来完成位置测量和控制。在严格控制实验环境条件下,得到了步距值为5 nm的双向步进位移。步距值的不确定度为8×10-9 nm,位移重复性误差小于1 nm。该定位方法的测量尺寸可直接溯源至长度标准,并且采用光电步进相移法可克服压电陶瓷的非线性和蠕变的机械缺陷。该方法在系统环境控制条件下适用于毫米行程位移,可应用于纳米计量和超精密加工等领域。

偏振激光干涉仪的纳米定位系统

详细阐述了用于纳米定位的偏振激光干涉仪的原理,并介绍了基于该偏振仪的纳米定位控制方法.该方法已由实验论证,实验位移系统的最小步长实测值为5 nm.并对系统的最小位移步长、重复性和分辨率做了详细的分析,在系统环境控制条件下适用于毫米行程位移,可应用于纳米计量和纳米加工.

Reactive Power Reserve Improvement Using Power Systems Inherent Structural Characteristics

This paper considers the use of the inherent structural characteristics of power system networks for improving the reactive power reserve margins for both topologically weak and strong networks. The inherent structural characteristics of the network are derived from the Schur complement of the partitioned Y-admittance matrix using circuit theory representations. Results show that topologically strong networks, operating close to the upper voltage limit could be made to increase their loadability margin by locating reactive power compensators close to generator sources, whereas topologically weak (ill conditioned) networks could be made to operate within the feasible operating limits by locating reactive power compensators on buses farther from generator sources.

Modeling Rules Fission and Modality Selection Using Ontology

Researchers in computer science and computer engineering devote a significant part of their efforts on communication and interaction between man and machine. Indeed, with the advent of multimedia and multimodal processing in real time, the computer is no longer considered only as a computational tool, but as a machine for processing, communication, collection and control. Many machines assist and support many activities in daily life. The main objective of this paper is to propose a new methodological solution by modeling an architecture that facilitates the work of multimodal system especially for a fission module. To realize such systems, we rely on ontology to integrate data semantically. Ontologies provide a structured vocabulary usedas support for data representation. This paper provides a better understanding of the fission system and multimodal interaction. We present our architecture and the description of the detection of optimal modalities. This is done by using an ontological model that contains different applicable scenarios and describes the environment where a multimodal system exists.

Mathematical Model with Energy and Clustering Energy Based Routing Protocols as Remediation to the Directional Source Aware Routing Protocol in Wireless Sensor Networks

In this paper, a routing protocol for wireless sensor network, baptized energy based protocol (EBP) is proposed. Wireless sensor network presents many challenges and constraints, and one of the major constraints is the routing problem. Due to the limited energy of sensor nodes, routing in this type of network shall perform efficiently to maximize the network lifetime. One of the proposed algorithms is the directional source aware routing protocol (DSAP) which, after simulation, showed a lot of limitations and drawbacks. The modified directional source aware routing protocol (MDSAP) was proposed by the authors of this paper to address some of the DSAP’s limitations but remains limited to a fixed topology, fixed source and stationary nodes. So EBP is proposed and operated under different scenarios and showed, after its simulation using TinyOS, many advantages in terms of load balancing, free looping, minimizing packet error rate and maximizing network lifetime.

Generic Tabu Search

The Multiple Sequence Alignment problem is considered to be an NP-Hard problem, requiring initially a specific encoding schema and design, as for any other of its siblings, to implement and run any of the main categories of heuristic. This paper intends to discuss our proposed generic implementation of the Tabu Search algorithm, a heuristic procedure proposed by Fred Glover to solve discrete combinatorial optimization problems. In this research, we try to coordinate and synchronize different designs/implementations discussed in many literatures, with some of the references mentioned in this paper. The basic idea is to avoid that the search for best solutions stops when a local optimum is found, by maintaining a list of non-acceptable or forbidden (taboo) solutions/costs, called Tabu list or Short-Term Memory (STM). In our algorithm, we attempt to add some executions tracing functionalities in order to help later analysis for initial parameters tuning. On the other hand, we propose to include the concept of a list called Long-Term Memory (LTM), so that some of the best solutions found so far can be saved, for search diversification.

Phase control of ellipsometric interferometer for nanometric positioning system

Development in industry is asking for improved resolution and higher accuracy in dimensional metrology. In this paper,we proposed a control displacement method based on a polarization ellipsometirc interferometer and phase-locked loop technique. The proposed principle was set up. The experimental results of step and step displacements with a step value of 5 nm were presented. We also analyzed the resolution,the potential minimal displacement of the established system. The results show that the position error induced by the ellipticty deviation of the light beam becomes negligible thanks to our signal processing circuit with high-order filter. This method could be useful for many applications in nano dimensional metrology and semiconductor industry.

Polarimetric interferometer for measuring nonlinearity error of heterodyne interferometric displacement system

This letter presents a polarimetric interferometer （PI） that can measure the ellipsometric parameter θ with an accuracy of 0.01° leading to a potential accuracy of 17 pm. The PI is constructed and compared with a commercial heterodyne interferometer （HI）. Given its low nonlinearity, the PI is used to measure the residual nonlinearity of a heterodyne interferometric displacement system. A rotating half wave plate is used to compensate for a part of the nonlinearity error caused by the misalignment of the axis between input polarizing states and beamsplitter.

Low friction in self-mated silicon carbide tribosystem using nanodiamond as lubricating additive in water

Nanodiamond particles(NDPs)have been considered as a potential lubricant additive to various tribological applications,such as water lubrication systems.In this study,the tribological properties of silicon carbide(SiC)lubricated by NDPs dispersed in water are investigated utilizing the ball-on-disk tribometer.It is found that the slight addition of NDP to water(i.e.,0.001 wt%)can distinctly accelerate the running-in process,which is necessary to achieve a friction coefficient(μ)as low as 0.01.This study also discusses two NDP functional terminations—hydroxyl and carboxyl.It is demonstrated that the use of carboxyl-terminated NDP over a wide range of concentration(0.001 wt%-1 wt%)yields a low friction force.In contrast,the ideal effective concentration of hydroxyl-terminated NDP is considerably limited because agglomeration in this material is more probable to occur than in the former.Meanwhile,when utilizing NDPs,the input friction energy(P_(in),defined as the product of sliding speed and applied load)is found to have an essential function.Several sliding tests were implemented at various P_(in) values(50-1,500 mW)using carboxyl-terminated water-dispersed NDPs.It was observed that theμand wear decreased with increasing P_(in) when 200 mW<P_(in)<1,500 mW.However,when P_(in)<200 mW,low friction with high wear occurs compared with the resulting friction and wear when pure water is used.