Thermal Characterization of Concrete and Cement Mortar from Construction Sites and Industrial Production Units in the City of Ouagadougou with a View to Standardization in Energy Certification

The present study allowed to carry out a thermal characterization of concrete and cement mortar. Thermal tests were carried out with the KD2 Pro device, on concrete and mortar samples taken from twenty-six (26) construction sites of office buildings and two (2) industrial production units in the city of Ouagadougou. The tests were carried out on rectangular specimens after four weeks (4) of conservation on the site of construction or production of materials. This study seeks to determine the thermal properties of the materials, in particular the thermal conductivity, the thermal diffusivity and the thermal capacity of the samples, in the real conditions of execution of the buildings and environment. The thermal conductivity varies from 1.413 to 1.965 W/m·K, 0.940 - 1.658 W/m·K and 0.703 - 1.149 W/m·K respectively for concrete, cinder block mortar and plaster mortar. Regarding the other properties, especially the capacity and thermal diffusivity, the values vary respectively, from 1070.59 - 1974.67 kJ/kg·K and (3.74 - 6.70) × 10-7 m2/s for concrete, from 1123.69 - 1586.81 kJ/kg·K and (3.38 - 5.65) × 10-7 m2/s for plaster mortar and 1202.51 - 1736.01 kJ/kg·K and (3.82 - 7.36) × 10-7 m2/s for the mortar of building blocks. The conductivity, capacity and thermal diffusivity of industrial mortar vary from 1.019 - 1.229 W/m·K, 792.18 - 1862.58 J/kg·K and (2.75 - 6.80) × 10-7 m2/s, respectively. Only the correlations made between the thermal properties and the density of the samples of the plaster mortar, give good relations namely R2 = 0.9308 for the thermal conductivity, R2 = 0.7823 for the thermal capacity and R2 = 0.9272 for the thermal diffusivity. This study contributes to the establishment of a thermal regulation in Burkina Faso for the adoption of the West African Economic and Monetary Union (WAEMU) Directive 05 on energy efficiency in buildings.

Simulation and Performance Analysis of Six Types of Sun Tracker Approaches:A Comparative Analysis for Solar Concentrating Technology Application at Burkina Faso

Modelization equations of six approaches for tracking the sun are recalled and used to evaluate the constraints and performances to which they lead to.The geographical study case is taken for the specific latitude of 12 North that is a good matching with the location of the country of Burkina Faso.Three decisive periods were locally established in order to consider the different travels of the sun on sky during one year.This work presents some technical data which facilitates the choice of sun tracking approaches with concern of a concentrator limits such as its angle of acceptance,its motion control card interpolation model,or its minimum irradiation level for energy conversion effectiveness.

Numerical Assessment of the Thermal Efficiency of a Concentrated Photovoltaic/Thermal (CPV/T) Hybrid System Using Air as Heat Transfer Fluid

In this paper, we propose a thermal model of a hybrid photovoltaic/thermal concentration system. Starting from the thermal balance of the model, the equation is solved and simulated with a MATLAB code, considering air as the cooling fluid. This enabled us to evaluate some of the parameters influencing the electrical and thermal performance of this device. The results showed that the temperature, thermal efficiency and electrical efficiency delivered depend on the air mass flow rate. The electrical and thermal efficiencies for different values of air mass flow are encouraging, and demonstrate the benefits of cooling photovoltaic cells. The results show that thermal efficiency decreases air flow rate greater than 0.7 kg/s, whatever the value of the light concentration used. The thermal efficiency of the solar cell increases as the light concentration increases, whatever the air flow rate used. For a concentration equal to 30 sun, the thermal efficiency is 0.16 with an air flow rate equal to 0.005 kg/s;the thermal efficiency increases to 0.19 with an air flow rate equal to 0.1 kg/s at the same concentration. An interesting and useful finding was that the proposed numerical model allows the determination of the electrical as well as thermal efficiency of the hybrid CPV/T with air flow as cooling fluid.

Investigating the Impact of Base Heating and External Electric Field on PV Cell Performance under Intense Illumination

The characterization of the performances of a PV cell is linked to intrinsic factors of this cell. It is therefore important for us to identify the favorable or unfavorable conditions that affect the performance of PV cells. It is from this perspective that it seems judicious to us to study the simultaneous influence of the heating of the base and an external electric field on the performance of a PV cell under intense illumination of 50 suns. Two phenomena contribute to the heating of the base of a PV cell which is heating due to the transfer by conduction of solar radiation energy received by the surface of the PV cell and the heat generated inside the PV cell by various phenomena linked to the movement of photogenerated charged carriers. In this study, we take into account the heating linked to the movement of the charged carriers in the base. After a mathematical modeling of the PV cell considered, some hypotheses are formulated and the expressions of the electrical parameters are established as a function of the electric field and base temperature. Subsequently, we use numerical simulation to highlight the behavior of theses parameters as a function of temperature and of the intensity of the electric field. The results show that for any given temperature, the orientation of the electric field as considered in our work improves the performance of the PV cell while high temperatures degrade these performances. Furthermore, the analysis of the curves shows that the harmful effect of temperature on the performance of a PV cell is more accentuated at large values of electric field.

Thermal Study and Modeling of the Cold Room of a Solar Adsoption Refrigerator

In this work, we are interested in the study of the thermal exchanges which take place at the evaporator of an adsorption refrigerator. Due to the cost of designing experimental devices and the impossibility of studying the influence of certain parameters experimentally, an alternative would be simulation. The aim is to provide a model for predicting the thermal behavior of the various elements in the cold room of an adsorption solar refrigerator. A dynamic modelling of the refrigerator taking into account fluid flow, heat and mass transfer phenomena in the cold room was made. The calculation code obtained using COMSOL 5.1 software makes it possible to analyze and study the influence of the various parameters on the performance of the system. In a second step, the theoretical results obtained were compared with the experimental results in order to validate the model. The analysis of the influence of the physical-thermal properties of the insulating material on the temperature of the chamber makes it possible to conclude that a material having a low density ρ, a low thermal conductivity λ and a low specific heat capacity offers better performance to the cold room. Better thermal insulation also implies having a reasonable insulation thickness.

Investigation of the Behavior of a Photovoltaic Cell under Concentration as a Function of the Temperature of the Base and a Variable External Magnetic Field in 3D Approximation

The photovoltaic (PV) cell performances are connected to the base photogenerated carriers charge. Some studies showed that the quantity of the photogenerated carriers charge increases with the increase of the solar illumination. This situation explains the choice of concentration PV cell (C = 50 suns) in this study. However, the strong photogeneration of the carriers charge causes a high heat production by thermalization, collision and carriers charge braking due to the electric field induced by concentration gradient. This heat brings the heating of the PV cell base. That imposes the taking into account of the temperature influence in the concentrator PV cell operation. Moreover, with the proliferation of the magnetic field sources in the life space, it is important to consider its effect on the PV cell performances. Thus, when magnetic field and base temperature increase simultaneously, we observe a deterioration of the photovoltage, the electric power, the space charge region capacity, the fill factor and the conversion efficiency. However the photocurrent increases when the base temperature increases and the magnetic field strength decreases. It appears an inversion phenomenon in the evolution of the electrical parameters as a function of magnetic field for the values of magnetic field B> 4×10-4 T.

Analysis and Comparison of Doping Level Effects on a Crystalline Silicon PV Cell under Both Moderate Light Concentration and Normal Illumination Modes

The main purpose of this work is to study doping level effects on a silicon PV cell under both moderate light concentration and normal illumination. This study also aims to compare the doping level effects under the both illumination modes. The results show for both illumination modes that diffusion parameters decrease with increasing doping level. These results are in agreement with the studies of the current and the voltage which showed for the two illumination modes that doping level increase leads to a decrease in current density and an increase in voltage. It also emerges for the two illumination modes and for the doping range 1013 cm-3 - 1016 cm-3, a decrease of maximum power and conversion efficiency. The results also show that decrease of diffusion parameters is faster under moderate concentration in comparison with normal illumination. These results predict a greater variation rate of the current, the voltage, the maximum power and the conversion efficiency under moderate concentration compared to normal illumination. Contrary to diffusion parameters study, the results show higher variation rates of parameters under normal illumination. This is explained by the fact that under moderate concentration, carriers density is close to doping level: the cell is then in high injection condition. Consequently, under moderate concentration, carriers density is less sensitive to doping level variations. The study confirms that carriers density variation with the doping level is weak under the moderate concentration compared to normal illumination.

Numerical Study of Heat Transfer in a Differentially Heated Cavity

Laminar natural convection is studied in a square cavity filled with air whose two vertical sides are subject to a temperature difference, while the other two horizontal sides are adiabatic. The hot and cold wall temperatures are kept constant. We have presented a dynamic and thermal study of pure natural convection for different values of the Rayleigh number. The numerical simulation was carried out for Rayleigh numbers ranging from 102, 103, …, 105 and the Prandtl number is Pr = 0.71. We used the COMSOL Multiphysic 5.1 software, which allows us to simultaneously solve the coupled physical phenomena in a square enclosure containing air under the Boussinesq approximation. For the coupling of natural convection with radiation from radiative surfaces, both horizontal faces are subjected to radiative flux, and the emissivity of the surfaces varies from ε = 0.1 to 0.8. We have seen that a circulation process is involved. The fluid that is subjected to a high temperature near the hot wall rises to the ceiling and the fluid near the cold wall sinks. This movement continues until the fluid reaches thermal equilibrium. In a natural convection-surface radiation coupling, simulation results indicate that radiative exchange decreases as a function of the Rayleigh number. Surface radiation reduces the flow in the cavity.

Establishment of a Model for the Calculation of the COP of a Solar Adsorption Refrigerator

This paper deals with the evaluation of the Coefficient of Performance (COP) of solar adsorption refrigeration. In the literature, simulation models to predict the thermal behaviour and the coefficient of performance of these systems are uncommon. This is why we suggest a model to simulate the operation of the machine in a typical hot and dry climate of the city of Ouagadougou. The objective is to provide a model for calculating the COP from the measurement of the ambient temperature and the irradiation of a given site. Starting from mathematical modelling, a resolution and simulation were made with COMSOL software based on the Dubinin-Astakhov adsorption model, the heat transfer balance equations, and the Linear Driving Force (LDF) model to describe the thermal behaviour of the system. A one-week measurement sequence on the adsorption solar refrigerator at the Albert Schweitzer Ecological Centre (CEAS) validated the numerical results. The measurement shows that for the days with high sunshine, the temperature of the reaction medium reaches 110°C, and the pressure reaches 500 mbar. This leads to a production of cold that allows it to reach the temperature of -5°C at the evaporator. Under these conditions, the COP is worth 14%. These results are obtained both by numerical simulation using the COMSOL 5.1 software and after a measurement session on the solar refrigerator available to the CEAS. We obtained an experimental and theoretical coefficient of performance varying between 9% and 14% with a difference of between 0% and 3%. We conclude that our model is suitable to estimate the COP of any device based on its thermal properties, the ambient temperature and the irradiation of a given site.

Effect of Incidence Angle of Magnetic Field on the Performance of a Polycrystalline Silicon Solar Cell under Multispectral Illumination

The aim of this work is to investigate, with a three-dimensional steady-state approach, the effect of the incidence angle of a magnetic field on the performance of a polycrystalline silicon solar cell under multispectral illumination. The magneto-transport and continuity equations of excess minority carriers are solved to find the expression of the density of excess minority carriers and the related electrical parameters, such as the photocurrent density, the photovoltage and the electric power, of a grain of the polycrystalline silicon solar cell. The influence of the incidence angle of the magnetic field on the diffusion coefficient, the short-circuit photocurrent density, the open-circuit photovoltage and the electric power-photovoltage is studied. Then, the curves of the electric power-photovoltage is used to find the maximum electric power allowing to calculate, according to the incidence angle of the magnetic field, the fill factor and the conversion efficiency. The study has shown that the increase of the incidence angle of the magnetic field from 0 rad to π/2 rad, can reduce the degradation of the performance of solar cells.

Temperature Effect on Light Concentration Silicon Solar Cell’s Operating Point and Conversion Efficiency

It is well known that temperature acts negatively on practically all the parameters of photovoltaic solar cells. Also, the solar cells which are subjected to particularly very high temperatures are the light concentration solar cells and are used in light concentration photovoltaic systems (CPV). In fact, the significant heating of these solar cells is due to the concentration of the solar flux which arrives on them. Light concentration solar cells appear as solar cells under strong influences of heating and temperature. It is therefore necessary to take into account temperature effect on light concentration solar cells performances in order to obtain realistic results. This one-dimensional study of a crystalline silicon solar cell under light concentration takes into account electrons concentration gradient electric field in the determination of the continuity equation of minority carriers in the base. To determine excess minority carrier’s density, the effects of temperature on the diffusion and mobility of electrons and holes, on the intrinsic concentration of electrons, on carrier’s generation rate as well as on width of band gap have also been taken into account. The results show that an increase of temperature improves diffusion parameters and leads to an increase of the short-circuit photocurrent density. However, an increase of temperature leads to a significant decrease in open-circuit photovoltage, maximum electric power and conversion efficiency. The results also show that the operating point and the maximum power point (MPP) moves to the open circuit when the cell temperature increases.

Potentials of an Eco-Friendly Composite in Hot-Dry Climate

This study aims to show the aptitude of a locally made composite for providing thermal comfort and mechanical resistance in buildings in hot-dry climates.The thermal characterization reveals that the thermal diffusivity of the studied material is lower than that of commonly used materials such as agglomerated and full cinderblocks and laterite blocks and therefore is a better insulating material.In addition,its thermal inertia is the highest compared to commonly used materials of agglomerated and full cinderblocks,laterite blocks and compressed earth blocks,which implies a longer time lag.On the basis of mechanical resistance,with a compression resistance of 3.61 MPa,the studied material meets the requirement of CRATerre and NBF 02-003(2009)as a material for construction of single-storey buildings.Therefore,this material,containing 1%Hibiscus sabdariffa fibers and compacted by vibration,is a suitable material for the walls of standing buildings and for thermal comfort in hot dry climates.

Modelling Study of Magnetic Field Effect on the Performance of a Silicon Photovoltaic Module

Solar Photovoltaic is a very promising solution that can greatly contribute in solving the increasing global energy demand. In both rural and urban areas, photovoltaic modules are in some instances installed close to telecommunication antennas or voltage transformers which generate important magnetic fields in their vicinity. The question is whether or not these magnetic fields affect the performances of the photovoltaic installations. This article presents a modelling study of external magnetic field effect on the electrical parameters of a photovoltaic module. The photocurrent, the photovoltage, the electric power, the series and the shunt resistances of the photovoltaic module, made up of ideal cells, are deduced from those of a silicon solar cell. Then, the I-V and P-V curves are plotted and the theoretical values of the electrical parameters of the photovoltaic module are deduced. The series and shunt resistances of the photovoltaic module are calculated using well known equations and the previous electrical parameters. The results show the negative effect of magnetic field on the performance of a solar photovoltaic module.

3-D Modeling of Temperature Effect on a Polycrystalline Silicon Solar Cell under Intense Light Illumination

The efficiency of a silicon solar cell is directly linked to the quantity of carrier photogenerated in its base. It increases with the increase of the quantity of carrier in the base of the solar cell. The carrier density in the base of the solar cell increases with the increase of the flux of photons that crosses the solar cell. One of the methods used to increase the flux of photon on the illuminated side of the solar cell is the intensification of the illumination light. However, the intensification of the light come with the increase of the energy released by thermalization, the collision between carriers, their braking due to the carriers concentration gradient electric field which lead to increase the temperature in the base of the solar cell. This work presents a 3-D study, of the effect of the temperature on the electronic parameters of a polycrystalline silicon solar under intense light illumination. The electronic parameters on which we analyze the temperature effect are:?the mobility of solar cell carriers?(electrons and holes),?their diffusion coefficient, their diffusion length and their distribution in the bulk of the base. To study the effect of the temperature on electronic parameters, we take into account, the dependence of carriers (electrons and holes) mobility with the temperature (μn,(T)?μp(T)). Then, the resolution of the continuity equation,which is a function of the carriers gradient electric field and the carriers mobility,?leads to the expressions of?the diffusion coefficient, the diffusion length, and the density of carriers which are function of the temperature. Then, we studied the effects of the temperature on the diffusion parameters in order to explain their effect on the behavior the carriers distribution in intermediate, short circuit and open circuit operating modes at several positions in the base depth. It appears through this study that the diffusion coefficient and the diffusion length decrease with the increase of the temperature. We observe also that with the increase of the temperature, the density of carriers in the base of the solar cell in short circuit and open voltage operating modes increases. In intermediate operating mode, the density of carriers increases also with the temperature but it is function of the base depth.

Diurnal Variability of the Radiative Impact of Atmospheric Aerosols in Ouagadougou, Burkina Faso: A Seasonal Approach

The objective of this work is to study the diurnal evolution of the radiative impact of atmospheric aerosols in an urban city located in the West African Sahel and the correlations with the main influencing factors of local climate dynamics. The simulation was performed using a treatment chain including the GAME code. In the methodology, the atmosphere is modeled by 33 plane parallel layers and the effects of absorption, multiple scattering by particles and gas are taken account. An hour-by-hour calculation of radiative forcing at the top of the atmosphere, in the atmospheric layer and at the earth’s surface was performed. The data used as input are the monthly averages of optical properties, radiosonde measurements, daily synoptic measurements and surface albedo. The results show a parabolic diurnal course of a negative radiative impact at the top of the atmosphere with an extremum at 12 o'clock. Maximum cooling is observed shortly after sunrise and shortly after sunset. The largest annual deviations are noted between the months of March and December with respective maximum cooling values of -34 W/m2 and -15.60 W/m2. On the earth’s surface, a cooling impact is observed with two diurnal peaks at sunrise and sunset, the greatest difference between the diurnal maximums is noted between March (-104.45 W/m2) and August (-54 W/m2). In the atmospheric layer, there is almost constant diurnal warming between 9 a.m. and 4 p.m. The maximum difference between the diurnal extremes is also noted between March (about 85 W/m2) and August (35 W/m2). Likewise, the study of the diurnal warming of the first atmospheric layer showed the extreme values in March (5.6°C) and August (2.4°C), these maximum values being always observed at around 12 o’clock. An analysis of similar works carried out in urban cities in various locations of the world has shown a relatively good accordance with the values obtained. This study highlights the radiative impact of Saharan desert dust, the effect of the local climate and the succession between dry season (November to May) and the rainy one (July to October), as well as the zenith solar angle and human activity.

Improvement of the Silicon Solar Cell Performance by Integration of an Electric Field Source in the Solar Cell or Solar Module System

This manuscript is about a theoretical modelling of conversion efficiency improvement of a typical polycrystalline Si solar cell in 1D assumptions. The improvement is brought by the increase of the collection of the minority carriers charge in excess. This increase is the consequence of the influence of an electric field provided by the use of the open circuit photovoltage of another silicon solar cell. We assume that it is integrated two silicon solar cells to the system. The first solar cell provides the open circuit photovoltage which is connected to two aluminum planar armatures creating a planar capacitor. The second solar cell is placed under the uniform electric field created between the two aluminum armatures. This work has shown an improvement of the output electric power leading to the increase of the conversion efficiency. We observe an increase of 0.7% of the conversion efficiency of the second silicon solar cell.

The Radiative Forcing of Aerosols in a West Africa Sahelian Urban City: Case Study of Ouagadougou

This paper is an assessment of radiative forcing caused by atmospheric aerosols in an urban city in West Africa. It is carried out in Ouagadougou in Burkina Faso and is an illustration of the radiative impact in most of the large Sahelian urban cities which are under the same climatic influences and whose populations present similarities in their socio-economic aspects. Using the GAME code, the radiative forcing was calculated at the top of the atmosphere, in the atmospheric layer and at the earth’s surface. The results showed overall a cooling effect at the top of the atmosphere due to the backscattering in space of the incident radiation, a heating in the atmospheric layer due to the absorption effect and a surface cooling justified by the attenuation of radiation crossing the atmosphere. Using monthly average values of optical properties, vertical temperature and humidity profiles, daily temperatures and surface albedo, the simulation yielded forcing values ranging from -6.77 W/m2 to -2.56 W/m2 at the top of the atmosphere, from 15.8 W/m2 to 34.7 W/m2 in the atmospheric layer and from -41.00 W/m2 to -21.68 W/m2 at the earth’s surface. In addition, the warming was simulated in the first atmospheric layer (in contact with the surface), and the results show values ranging from 0.8°C to 1.8°C. The study of the annual variability of the results showed a strong correlation between the radiative forcing and the seasonal succession characteristic of the climate in West Africa with the extreme values in the month of March (characteristic of the dry and hot season) and in the month of August (characteristic of the rainy season).

Study of the Potential for the Solar Concentrating Sector in Burkina Faso

The results of atmospheric effect characterization on the town of Ouagadougou in Burkina Faso are presented and the link with the availability of the direct component of solar radiation is discussed.Experimental meteorological data are treated to set a system of constant references which are used to extrapolate the likely atmospheric effect given by the other experimental meteorological data from 1976 to 2006.As results the periods of strong monthly attenuation of the solar potential are pointed out.

Experimental Measurement of Minority Carriers Effective Lifetime in Silicon Solar Cell Using Open Circuit Voltage Decay under Magnetic Field in Transient Mode

This manuscript presents a simple method for excess minority carriers’ lifetime measurement within the base region of p-n junction polycrystalline solar cell in transient mode. This work is an experimental transient 3-Dimensionnal study. The magnitude of the magnetic field B is varied from 0 mT to 0.045 mT. Indeed, the solar cell is illuminated by a stroboscopic flash with air mass 1.5 and under magnetic field in transient state. The experimental details are assumed in a figure. The procedure is outlined by the Open Circuit Voltage Decay analysis. Effective minority carrier life-time is calculated by fitting the linear zone of the transient voltage decay curve because linear decay is an ideal decay. The kaleidagraph software permits access to the slope of the curve which is inversely proportional to the lifetime. The external magnetic effects on minority carriers’ effective lifetime is then presented and analyzed. The analysis shows that the charge carrier’s effective lifetime decrease with the magnetic field increase.