WC–Co cemented carbides, well-known as the conventional tooling materials, have not been successfully produced by one step additive manufacturing processes such as selective laser melting(SLM) yet. The microstructure...WC–Co cemented carbides, well-known as the conventional tooling materials, have not been successfully produced by one step additive manufacturing processes such as selective laser melting(SLM) yet. The microstructure evolution as well as WC grain growth behavior has rarely been investigated in detail during SLM process. In this study, the WC–Co cemented carbides with different Co contents(12–32 wt%) were prepared by optimized SLM processes for comparative investigation of densification behavior, microstructure characterization and mechanical property. The increase in Co content in feedstock carbide granules can improve the densification behavior during SLM process. The SLM processed WC-12 Co shows larger average WC grain size and higher percentage of coarser WC grains as compared with both WC-20 Co and WC-32 Co. The microstructure characterization, combined with finite element simulation, shows the WC grain growth mechanisms include agglomeration and dissolution-deposition of WC during SLM process and agglomeration of WC is an important mechanism especially for WC–Co cemented carbides with Co content as low as 12 wt%. The comparison between horizontal(perpendicular to the SLM laser beam) and vertical(parallel to the SLM laser beam) cross sections of carbides shows that SLM process introduces a certain degree of microstructure and mechanical behavior anisotropy for WC-12 Co, WC-20 Co, and WC-32 Co.展开更多
基金financially supported by the Science and Technology Project of Guangdong Province,China(Grant Nos.2017B090911006 and 2017B090913006)the Key Project of Basic Research and Applied Basic Research in Universities of Guangdong Province,China(Grant No.2018KZDXM043)+3 种基金the Jihua Laboratory Project“Additive Manufacturing for Difficulty-to-Machine Materials”(Grant No.X190061UZ190)the Heyuan Science and Technology Project(Grant No.HEKE 000781)the Young Innovative Talents Program of Universities in Guangdong Province(Grant No.2018KQNCX141)the Guangzhou Science and Technology Project(Grant No.202002030259)。
文摘WC–Co cemented carbides, well-known as the conventional tooling materials, have not been successfully produced by one step additive manufacturing processes such as selective laser melting(SLM) yet. The microstructure evolution as well as WC grain growth behavior has rarely been investigated in detail during SLM process. In this study, the WC–Co cemented carbides with different Co contents(12–32 wt%) were prepared by optimized SLM processes for comparative investigation of densification behavior, microstructure characterization and mechanical property. The increase in Co content in feedstock carbide granules can improve the densification behavior during SLM process. The SLM processed WC-12 Co shows larger average WC grain size and higher percentage of coarser WC grains as compared with both WC-20 Co and WC-32 Co. The microstructure characterization, combined with finite element simulation, shows the WC grain growth mechanisms include agglomeration and dissolution-deposition of WC during SLM process and agglomeration of WC is an important mechanism especially for WC–Co cemented carbides with Co content as low as 12 wt%. The comparison between horizontal(perpendicular to the SLM laser beam) and vertical(parallel to the SLM laser beam) cross sections of carbides shows that SLM process introduces a certain degree of microstructure and mechanical behavior anisotropy for WC-12 Co, WC-20 Co, and WC-32 Co.