期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Complete stabilization of severely As-contaminated soil by a simple H2O2 pre-oxidation method combined with non-toxic TMT-15 and FeCl3·6H2O 被引量:2
1
作者 Chang-sheng Yue Ben Peng +3 位作者 Wei Tian Guang-hua Lu Gui-bo Qiu Mei Zhang 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2019年第9期1105-1112,共8页
The stabilization of severely As-polluted soil has been a challenge, especially for the extremely toxic As(Ⅲ) contaminants. In this study, soil with a high As concentration(26084 mg/kg) was availably stabilized by a ... The stabilization of severely As-polluted soil has been a challenge, especially for the extremely toxic As(Ⅲ) contaminants. In this study, soil with a high As concentration(26084 mg/kg) was availably stabilized by a H2O2 pre-oxidation assisted TMT-15(Na3S3C3N3 solution with a mass fraction of 15%) and FeCl3·6 H2O stabilization method. The results showed that the combination of the two stabilizers(i.e., TMT-15 and FeCl3·6 H2O) presented a better stabilization behavior than either stabilizer used individually. The use of the H2O2 pre-oxidation assisted TMT-15 and FeCl3·6 H2O stabilization approach not only converted the As(Ⅲ) to As(Ⅴ) but also reduced the toxic leaching concentration of As to 1.61 mg/L, which is a safe level, when the additions of TMT-15 and FeCl3·6 H2O were 2 mL and 0.20 g, respectively. Thus, using only a simple H2O2 pre-oxidation to combine clean stabilization with non-toxic stabilizers TMT-15 and FeCl3·6 H2O could render the severely As-contaminated soil safe for disposal in a landfill. 展开更多
关键词 severely As-contaminated soil NON-TOXIC STABILIZERS combining STABILIZATION PRE-OXIDATION
下载PDF
Microstructure and texture evolution during recrystallization of low-carbon steel sheets
2
作者 Dong-dong Zhuang Lei-gang Wang +3 位作者 Yao Huang Xiao-min Li Hua-yang Zhang De-wei Ren 《Journal of Iron and Steel Research(International)》 SCIE EI CAS CSCD 2017年第1期84-90,共7页
Aluminum killed low-carbon steel sheets were cold rolled at different reduction ratios and annealed using different temperatures and holding time.The Vickers hardness was examined.The results show that when cold rolli... Aluminum killed low-carbon steel sheets were cold rolled at different reduction ratios and annealed using different temperatures and holding time.The Vickers hardness was examined.The results show that when cold rolling reduction ratios increase from 40% to 81%,recrystallization temperatures decrease from 602℃ to 572℃ during 4hisochronal annealing,as well recrystallization holding time decreases from 117 min to 5min during isothermal annealing at 610℃.All recrystallization temperatures and holding time can be calculated using the annealing experiment results.Microstructure was examined through electron backscattered diffraction(EBSD).The results show that as rolling direction preferentially grows,equiaxed grains grow into cake-type during recrystallization.Cake-type grains are more beneficial to obtaining ideal〈111〉//ND(normal direcrtion)orientation texture.{111}orientation grains nucleate and grow up preferentially.Deformation grains of{111}〈110〉orientations grow into new recrystallization grains of{111}〈123〉and{111}〈112〉during recrystallization.Texture formation can be explained by directional nucleation. 展开更多
关键词 Aluminum killed low-carbon steel sheet RECRYSTALLIZATION ANNEALING Vickers hardness TEXTURE
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部