The study deals with adsorption of Naphthol Green B on two unburned carbons and the parent coal,from which the UCs have been created in a fluidised-bed power station.Particular attention has been paid to the adsorptio...The study deals with adsorption of Naphthol Green B on two unburned carbons and the parent coal,from which the UCs have been created in a fluidised-bed power station.Particular attention has been paid to the adsorption equilibrium modelling:experimental data has been analysed using 2-parameter(Langmuir,Freundlich) and3-parameter(Redlich-Peterson) isotherms — both linear and non-linear regressions have been used for the estimation of the isotherm parameters.In the case of both UCs,the Langmuir isotherm model provides the worst fit,whereas 2-parameter Freundlich and 3-parameter Redlich-Peterson models are both good,from which 3-parameter Redlich-Peterson isotherm provides slightly better results(despite the penalty used for the higher number of parameters).In the case of both UCs,the linear regression of Freundlich and Redlich-Peterson models provides good results(comparable with non-linear regressions).Unlike both UCs,the best fit of the experimental data from the adsorption on the coal has been achieved by the Langmuir isotherm model.The results based on the Freundlich or Redlich-Peterson model were(in this case) somewhat worse.展开更多
Bentonite is one of the most widespread used clays connected with various applications. In the case of foundry technology, bentonite is primarily used as a binder for mold manufacture. Thermal stability of bentonites ...Bentonite is one of the most widespread used clays connected with various applications. In the case of foundry technology, bentonite is primarily used as a binder for mold manufacture. Thermal stability of bentonites is a natural property of clay minerals and it depends on the genesis, source and chemical composition of the clay. This property is also closely connected to bentonite structure. According to DTA analysis if only one peak of dehydroxylation is observed(about 600 oC), the cis- isomerism of bentonite is expected, while two peaks of de-hydroxylation(about 550 and 850 oC) are expected in the trans- one. In this overview, the bentonite structure, the water – bentonite interaction and the swelling behavior of bentonite in connection with the general technological properties of bentonite molding mixture are summarized. Further, various types of methods for determination of bentonite thermostability are discussed, including instrumental analytical methods as well as methods that employ evaluation of various technological properties of bentonite binders and/or bentonite molding mixtures.展开更多
基金Supported by the project No.LO1404(Sustainable Development of Center ENET-Energy Units for the Utilization of Non-Traditional Energy Sources)project No.LO 1203(Regional Materials Science and Technology Centre-Feasibility Program)+1 种基金the project No.LO1406(Institute of Clean Technologies for Mining and Utilization of Raw Materials for Energy Use-Sustainability Programsupported by the National Programme for Sustainability I 2013-2020
文摘The study deals with adsorption of Naphthol Green B on two unburned carbons and the parent coal,from which the UCs have been created in a fluidised-bed power station.Particular attention has been paid to the adsorption equilibrium modelling:experimental data has been analysed using 2-parameter(Langmuir,Freundlich) and3-parameter(Redlich-Peterson) isotherms — both linear and non-linear regressions have been used for the estimation of the isotherm parameters.In the case of both UCs,the Langmuir isotherm model provides the worst fit,whereas 2-parameter Freundlich and 3-parameter Redlich-Peterson models are both good,from which 3-parameter Redlich-Peterson isotherm provides slightly better results(despite the penalty used for the higher number of parameters).In the case of both UCs,the linear regression of Freundlich and Redlich-Peterson models provides good results(comparable with non-linear regressions).Unlike both UCs,the best fit of the experimental data from the adsorption on the coal has been achieved by the Langmuir isotherm model.The results based on the Freundlich or Redlich-Peterson model were(in this case) somewhat worse.
文摘Bentonite is one of the most widespread used clays connected with various applications. In the case of foundry technology, bentonite is primarily used as a binder for mold manufacture. Thermal stability of bentonites is a natural property of clay minerals and it depends on the genesis, source and chemical composition of the clay. This property is also closely connected to bentonite structure. According to DTA analysis if only one peak of dehydroxylation is observed(about 600 oC), the cis- isomerism of bentonite is expected, while two peaks of de-hydroxylation(about 550 and 850 oC) are expected in the trans- one. In this overview, the bentonite structure, the water – bentonite interaction and the swelling behavior of bentonite in connection with the general technological properties of bentonite molding mixture are summarized. Further, various types of methods for determination of bentonite thermostability are discussed, including instrumental analytical methods as well as methods that employ evaluation of various technological properties of bentonite binders and/or bentonite molding mixtures.
