Experimental Investigation of the Resistance Performance and Heave and Pitch Motions of Ice-Going Container Ship Under Pack Ice Conditions

In order to analyze the ice-going ship’s performance under the pack ice conditions, synthetic ice was introduced into a towing tank. A barrier using floating cylinder in the towing tank was designed to carry out the resistance experiment. The test results indicated that the encountering frequency between the ship model and the pack ice shifts towards a high-velocity point as the concentration of the pack ice increases, and this encountering frequency creates an unstable region of the resistance, and the unstable region shifts to the higher speed with the increasing concentration. The results also showed that for the same speed points, the ratio of the pack ice resistance to the open water resistance increases with the increasing concentration, and for the same concentrations, this ratio decreases as the speed increases. Motion characteristics showed that the mean value of the heave motion increases as the speed increases, and the pitch motion tends to increase with the increasing speed. In addition, the total resistance of the fullscale was predicted.

Study on the Characteristics of A New Hybrid Mooring System for DualPlatform Joint Operations

As the sustainable exploitation of marine resources develops,dual-platform joint operation has caught increasing attention.Dual-platform joint operation requires smaller relative motion between the two sub-platforms,which is normally difficult to be satisfied by the traditional mooring system.Therefore,a new hybrid mooring system is developed and studied in this article.To ensure safety during platform movements,both the number of anchor chains and the relative motion between the two sub-platforms are reduced in the new hybrid mooring system.By performing numerical simulations based on three-dimensional potential flow theory in AQWA and physical experiments,the performances of both the new hybrid and traditional mooring systems under two different wave conditions(i.e.,working wave and freak wave conditions) are systematically investigated.Regarding the new hybrid mooring system,the relative stability between the two sub-platforms of the new system is better,and the platforms can restore stability faster when affected by freak waves.

Computational Fluid Dynamics Uncertainty Analysis for Simulations of Roll Motions for a 3D Ship

The roll motions are influenced by significant viscous effects such as the flow separation.The 3D simulations of free decay roll motions for the ship model DTMB 5512 are carried out by Reynold averaged NavierStokes(RANS) method based on the dynamic mesh technique.A new moving mesh technique is adopted and discussed in details for the present simulations.The purpose of the research is to obtain accurate numerical prediction for roll motions with their respective numerical/modeling errors and uncertainties.Errors and uncertainties are estimated by performing the modern verification and validation(V&V) procedures.Simulation results for the free-floating surface combatant are used to calculate the linear,nonlinear damping coefficients and resonant frequencies including a wide range of forward speed.The present work can provide a useful reference to calculate roll damping by computational fluid dynamics(CFD) method and simulate a general ship motions in waves.

Structural Safety Assessment for FLNG-LNGC System During Offloading Operation Scenario

The crashworthiness of the cargo containment systems （CCSs） of a floating liquid natural gas （FLNG） and the side structures in side-by-side offioading operations scenario are studied in this paper. An FLNG vessel is exposed to potential threats from collisions with a liquid natural gas carrier （LNGC） during the offioading operations, which has been confirmed by a model test of FLNG-LNGC side-by-side offioading operations. A nonlinear finite element code LS-DYNA is used to simulate the collision scenarios during the offioading operations. Finite element models of an FLNG vessel and an LNGC are established for the purpose of this study, including a detailed LNG cargo containment system in the FLNG side model. Based on the parameters obtained from the model test and potential dangerous accidents, typical collision scenarios are defined to conduct a comprehensive study. To evaluate the safety of the FLNG vessel, a limit state is proposed based on the structural responses of the LNG CCS. The different characteristics of the structural responses for the primary structural components, energy dissipation and collision forces are obtained for various scenarios. Deformation of the inner hull is found to have a great effect on the responses of the LNG CCS, with approximately 160 mm deformation corresponding to the limit state. Densely arranged web frames can absorb over 35% of the collision energy and be proved to greatly enhance the crashwo- rthiness of the FLNG side structures.