Lithium-and manganese-rich(LMR)layered cathode materials hold the great promise in designing the next-generation high energy density lithium ion batteries.However,due to the severe surface phase transformation and str...Lithium-and manganese-rich(LMR)layered cathode materials hold the great promise in designing the next-generation high energy density lithium ion batteries.However,due to the severe surface phase transformation and structure collapse,stabilizing LMR to suppress capacity fade has been a critical challenge.Here,a bifunctional strategy that integrates the advantages of surface modification and structural design is proposed to address the above issues.A model compound Li_(1.2)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)(MNC)with semi-hollow microsphere structure is synthesized,of which the surface is modified by surface-treated layer and graphene/car-bon nanotube dual layers.The unique structure design enabled high tap density(2.1 g cm^(−3))and bidirectional ion diffusion pathways.The dual surface coatings covalent bonded with MNC via C-O-M linkage greatly improves charge transfer efficiency and mitigates electrode degradation.Owing to the synergistic effect,the obtained MNC cathode is highly conformal with durable structure integrity,exhibiting high volumetric energy density(2234 Wh L^(−1))and predominant capacitive behavior.The assembled full cell,with nanograph-ite as the anode,reveals an energy density of 526.5 Wh kg^(−1),good rate performance(70.3%retention at 20 C)and long cycle life(1000 cycles).The strategy presented in this work may shed light on designing other high-performance energy devices.展开更多
Porous polyaniline (PANI) was prepared through an efficient and costeffective method by polymerization of aniline in the NaCl solution at room temperature. The resulting PANI provided large surface area due to its hig...Porous polyaniline (PANI) was prepared through an efficient and costeffective method by polymerization of aniline in the NaCl solution at room temperature. The resulting PANI provided large surface area due to its highly porous structure and the intercrossed nanorod, resulting in good electrochemical performance. The porous PANI electrodes showed a high specific capacitance of 480 F·g^-1, 3 times greater than that of PANI without using the NaCl solution. We also make chemically crosslinked hydrogel film for hydrogel polymer electrolyte as well as the flexible supercapacitors (SCs) with PANI. The specific capacitance of the device was 234 F·g^-1 at the current density of 1 A·g^-1. The energy density of the device could reach as high as 75 W·h·kg^-1 while the power density was 0.5 kW·kg^-1, indicating that PANI be a promising material in flexible SCs.展开更多
基金The authors greatly appreciate the financial support from the National Science Foundation of China(22075048,51173027,21875141)Beijing National Laboratory for Condensed Matter Physics,Shanghai International Collaboration Research Project(19520713900).
文摘Lithium-and manganese-rich(LMR)layered cathode materials hold the great promise in designing the next-generation high energy density lithium ion batteries.However,due to the severe surface phase transformation and structure collapse,stabilizing LMR to suppress capacity fade has been a critical challenge.Here,a bifunctional strategy that integrates the advantages of surface modification and structural design is proposed to address the above issues.A model compound Li_(1.2)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)(MNC)with semi-hollow microsphere structure is synthesized,of which the surface is modified by surface-treated layer and graphene/car-bon nanotube dual layers.The unique structure design enabled high tap density(2.1 g cm^(−3))and bidirectional ion diffusion pathways.The dual surface coatings covalent bonded with MNC via C-O-M linkage greatly improves charge transfer efficiency and mitigates electrode degradation.Owing to the synergistic effect,the obtained MNC cathode is highly conformal with durable structure integrity,exhibiting high volumetric energy density(2234 Wh L^(−1))and predominant capacitive behavior.The assembled full cell,with nanograph-ite as the anode,reveals an energy density of 526.5 Wh kg^(−1),good rate performance(70.3%retention at 20 C)and long cycle life(1000 cycles).The strategy presented in this work may shed light on designing other high-performance energy devices.
文摘Porous polyaniline (PANI) was prepared through an efficient and costeffective method by polymerization of aniline in the NaCl solution at room temperature. The resulting PANI provided large surface area due to its highly porous structure and the intercrossed nanorod, resulting in good electrochemical performance. The porous PANI electrodes showed a high specific capacitance of 480 F·g^-1, 3 times greater than that of PANI without using the NaCl solution. We also make chemically crosslinked hydrogel film for hydrogel polymer electrolyte as well as the flexible supercapacitors (SCs) with PANI. The specific capacitance of the device was 234 F·g^-1 at the current density of 1 A·g^-1. The energy density of the device could reach as high as 75 W·h·kg^-1 while the power density was 0.5 kW·kg^-1, indicating that PANI be a promising material in flexible SCs.