Spectral Analysis in EUV Range for Study of Core Impurity Behavior in HL-2A

Extreme ultraviolet （EUV） spectroscopy has been developed for impurity diagnostics in HL-2A tokamak. The EUV spectrometer consists of an entrance slit, a holographic varied-line- space （VLS） grating, a back-illuminated charge-coupled device （CCD） and a laser light source for optical alignment. Spectral lines in wavelength region of 20-500 A observed from HL-2A plasmas were analyzed to study the impurity behavior. Spectral and temporal resolutions used for the analysis were 0.19A at CV （2×33.73 ,h,） and 6 ms, respectively. It was found that carbon, oxygen and iron impurities were usually dominant in the HL-2A plasma. They almost disappeared when the siliconization was carried out. Although the EUV spectra were entirely replaced by the silicon emissions just after the siliconization, the emissions were considerably decreased with accumulation of discharges. Aluminum and neon were externally introduced into the HL-2A plasma based on laser blow-off （LBO） and supersonic molecular beam injection （SMBI） techniques for a trial of the impurity transport study, respectively. The preliminary result is presented for time behavior of EUV spectral lines.

HL-2A tokamak disruption forecasting based on an artificial neural network

Artificial neural networks are trained to forecast the plasma disruption in HL-2A tokamak. Optimized network architecture is obtained. Saliency analysis is made to assess the relative importance of different diagnostic signals as network input. The trained networks can successfully detect the disruptive pulses of HL-2A tokamak. The results obtained show the possibility of developing a neural network predictor that intervenes well in advance for avoiding plasma disruption or mitigating its effects.

Reference Design of ICRF Antenna for EAST

An antenna array suitable for plasma heating and current drive has been designed for the ion cyclotron resonance frequency range （ICRF） heating on the EAST superconducting tokamak. The ICRF heating is planned to operate in a frequency range of 30 MHz to 80 MHz and hence the antenna geometry is optimized for 55 MHz. The design is based on the conventional strap antenna element. The coupling properties of the antenna are calculated with a slab model of the plasma for the antenna simulation. The coupling code is extended for the analysis of the toroidal antenna array separated by septa.

Analysis Scheme for Density Modulation Experiments to Study Particle Confinements

Density modulation experiments are powerful experimental schemes for the study of particle transport. The diffusion coefficients （D） and convection velocity （V）, which cannot be evaluated from the particle balance in the equilibrium state, can be obtained separately. Further, the estimated values of D and V are determined independent of the absolute value of the particle source rate, which is difficult to obtain experimentally. However, the sensitivities and interpretation of D and V from the modulation experiments need to be considered. This paper describes numerical techniques for solving the particle balance equation of the modulation components. Examples of the analysis are shown regarding the data of LHD experiments, and the results of the modulation experiments are discussed.

Toroidal component of velocity for geodesic acoustic modes in the edge plasmas of the J-TEXT tokamak

The toroidal component of the velocity for geodesic acoustic modes(GAMs)is first demonstrated.Multiple Langmuir probe arrays set up near the top tokamak of the J-TEXT were utilized for this study.A significant peak at the GAM frequency is observed in Mach number fluctuations.The toroidal velocity for the GAMs is estimated as 10–100 ms-1 and increases with the poloidal velocity.The ratio of toroidal component to the poloidal one of the velocity is mainly located in the interval between 0.3 and 1.0.With higher safety factors q,the ratio almost does not change with decreasing the safety factor,whereas it goes up sharply at low q.The coherencies between poloidal electric fields and Mach number fluctuations in turbulence frequency bands are also evaluated,and are higher than those between radial electric fields and Mach number fluctuations.

High Density Plasma Heating by EC-Waves Injected from the High-Field Side for Mode Conversion to Electron Bernstein Waves in LHD

To realize an excitation of electron Bernstein waves （EBW） via mode conversion from X-mode waves injected from the high magnetic field side （HFS）, new inner-vessel mirrors were installed close to a helicM coil in the large helicM device （LHD）. 77 GHz electron cyclotron （EC） wave beams injected from an existing EC-wave injection system toward the new mirror are reflected on the mirror so that the beams are injected to plasmas from HFS. Evident increases in the electron temperature at the plasma core region and the plasma stored energy were observed by the HFS beam injection to the plasmas with the line-average electron density of 7.5~ 1019 m-3, which is slightly higher than the plasma cut-off density of 77 GHz EC-waves, 7.35~ 1019 m-3. The heating efficiency evaluated from the changes in the time derivative of the plasma stored energy reached ,,~70%. Although so far it is not clear which is the main cause of the heating effect, the mode-converted EBW or the X-mode wave itself injected from the HFS, an effective heating of high-density plasma over the plasma cut-off of EC-wave was successfully demonstrated.

Development of a Heavy Ion Bearn Probe for Measuring Electrostatic Potential Profile and Its Fluctuation in LHD

A heavy ion beam probe （HIBP） using a 3-MV tandem accelerator has been installed on large helical device （LHD）. Electrostatic potential in core plasma can be measured under the toroidal magnetic field strength of up to 3 T. By using the HIBP, the transition of potential profiles from electron-root to ion^root is observed in core plasmas during ramp-up of the electron density. Potential fluctuations are also measured electron cyclotron current drive （ECCD）. Two kind of characteristic fluctuations are observed. One is a reversed-shear-induced Alfv^n eigenmode （RSAE）, whose frequency varies during the evolution of the rotational transform profile, and the other is with a constant geodeisc acoustic mode （GAM） frequency.

High Power RF Transmitters for ICRF Applications on EAST

An Ion Cyclotron Range of Frequency （ICRF） system with a radio frequency （RF） power of 4×1.5 MW was developed for the Experimental Advanced Superconducting Tokamak （EAST）. High RF power transmitters were designed as a part of the research and development （R^D） for an ICRF system with long pulse operation at megawatt levels in a frequency range of 25 MHz to 70 MHz. Studies presented in this paper cover the following parts of the high power transmitter： the three staged high power amplifier, which is composed of a 5 kW wide- band solid state amplifier, a 100 kW tetrode drive stage amplifier and a 1.5 MW tetrode final stage amplifier, and the DC high voltage power supply （HVPS）. Based on engineering design and static examinations, the RF transmitters were tested using a matched dummy load where an RF output power of 1.5 MW was achieved. The transmitters provide 6 MW RF power in primary phase and will reach a level up to 12 MW after a later upgrade. The transmitters performed successfully in stable operations in EAST and HT-7 devices. Up to 1.8 MW of RF power was injected into plasmas in EAST ICRF heating experiments during the 2010 autumn campaign and plasma performance was greatly improved.

Formation of Edge Transport Barriers by L-H Transition and Large Reversed Plasma Current on LHD

On the Large Helical Device （LHD） where nested magnetic surfaces are surrounded by the ergodic field layer, edge transport barrier （ETB） was produced in neutral-beam-injection （NBI） heated plasmas through transition and non-transition processes. The former case is the ETB formation by L-Htransition, where characteristics of L-H transition observed in a tokamak plasma are clearly recognized. The confinement improvement is the modest （- 10%）, compared with the ISS95 international stellarator scaling. The threshold power for the transition is comparable or slightly lower than the ITER scaling law established by tokamaks and compact tori. The ETB is formed inside the ergodic field layer of the vacuum field. The ETB formation destabilizes edge coherent modes such as m/n = 1/1, 2/3 and 1/2, of which rational surfaces are in the magnetic hill. The formed ETB is partially and transiently destroyed by these coherent edge MHD modes and edge localized modes （ELMs） typically observed in Ha signals. The latter ETB is observed in a plasma with large reversed NBI-driven current more than 100 kA at Bt = 1 T. In these plasmas, the edge magnetic shear is enhanced by the current and the rotational transform in the core region is expected to be appreciably reduced. Thus reduced rotational transform in the plasma central region will enhance outward heat and particle fluxes toward ergodic edge layer. The ETB with steep electron temperature gradient up to - 5 keV/m is formed by blocking enhanced outward heat flux.

Evaluation of The Thermal Performance of Multi-Element Doped Graphite under Steady-State High Heat Flux

Multi-element doped graphite, GBST1308 has been developed as a plasma facing material (PFM) for high heat flux components of the HT-7U device. The thermal performance of the material under steady-state (SS) high heat flux was evaluated under actively cooling conditions, the specimens were mechanically joined to copper heat sink with supercarbon sheet as a compliant layer between the interfaces. The experiments have been performed in a facility of ACT (actively cooling test stand) with a 100 kW electron gun in order to test the suitability and the loading limit of such materials. The surface temperature and bulk temperature distribution of the specimens were investigated. The experimental results are very encouraging that when heat flux is not more than 6 MW/m2, the surface temperature of GBST1308 is less than 1000℃, which is the lowest, compared with IG-430U and even with CX-2002U (CFC); The primary results indicate that the mechanically-joined material system by such a proper design as thin tile, super compliant layer, GBST as a PFM and copper-alloy heat sink, can be used as divertor plates for HT-7U in the first phase.

Soft x-ray tomographic reconstruction of Heliotron J plasma for the study of magnetohydrodynamic equilibrium and stability

The preparation for an experimental soft x-ray tomography study on the Heliotron J (H-J) machine is carried out,with the objectives of evaluating the capability of the current soft x-ray tomographic system in terms of the identification of different mode structures and their poloidal rotation,and the axis shift with different plasma and machine parameters,and fixing the physics goals for the experimental study.These preparations were carried out via a simulated soft x-ray data set arising from different plasma conditions,such as magnetic islands,low beta and high beta.Soft x-ray tomography (SXT) is performed by the discrete pixel method including singular value decomposition and Phillips-Tikhonov regularization,to obtain clear and smooth images.The H-J soft x-ray tomography results from simulated soft x-rays for the equilibrium H-J plasma sensed the magnetic axis shift clearly and an estimate was also achieved.Successful reconstruction for mode structure m =1/n =1 was obtained along with the realization of the poloidal rotation of the structure.The reconstruction for the m =2/n =1 mode was not very clear for the current soft x-ray diagnostic design.Effective mode identification was not possible due to the lack of measurements.The SXT from the current soft x-ray diagnostic on H-J,the magnetic axis shift can be estimated and the m =1/n =1 mode can be studied.Study of higher poloidal modes is difficult with the current design.

Design of High Power DC Break For ICRH Of EAST

1.5MW Ion Cyclotron Wave Heating system was developed, the transmitter and the antenna both have their ground loops, which will severely perturb the system’s normal operation. To avoid perturbation, a DC break was designed. The S parameter and the VSWR (voltage standing wave ratio) of incident port were calculated; the thermal effect caused by conductor loss and dielectric loss was analyzed.

Measurement of the Electron Bernstein Wave Emission with One of the Power Transmission Lines for ECH in LHD

Possibility of the measurement of radiated waves derived from the thermally emitted electron Bernstein wave （EBW） is numerically investigated based on the assumption of the super dense core （SDC） plasma generated in LHD. EBW that is thermally emitted in the electron cyclotron resonance （ECR） layer may couple with the electromagnetic wave and be emitted to the vacuum via the EBW-extraordinary-ordinary （B-X-O） mode conversion process. We consider the use of one of the transmission lines for electron cyclotron heating （ECH） in LHD as a receiving system of the emission. It is derived that the waves in the fundamental cyclotron frequency range are emitted as the EBW near their upper hybrid resonance （UHR） layer outside the last close flux surface （LCFS）. On the other hand, waves in the second harmonics cyclotron frequency range are emitted in the core region. It means that successful measurement of waves of the second harmonic frequency range emitted from extremely high dense core plasma with setting an aim angle for receiving indicates a possibility of the second harmonic ECH by EBW in the core region with setting the same aim angle and the same polarization for launching.

Refueling for Steady-State Plasma by Repetitive Pellet Injection in Large Helical Device

A repetitive pellet injector has been developed for investigation ofrefueling issues towards the steady-state operation in Large Helical Device (LHD). Continuousoperation of more than 10000 pellet launching at 10 Hz has been demonstrated. The maximum repeatingrate is 11 Hz. No technical constraint for longer operation has been found. The reliability ofpellet launch has exceeded 99.9%. The initial application to the NBI-heated plasmas has beensuccessful in the last experimental campaign of LHD. Although the pulse length is limited by theoperational constraint of NBI, the plasma with a density of 8 X 10^(19) m^(-3) has been sustainedfor 2 s by the pellet injection at 10 Hz. A prospect for the future experiment is discussed on thebasis of the initial result.

Linear Gyro-Kinetic Response Function for Zonal Flows

A linear response function for zonal flows is obtained by solving the gyro-kinetic equation. This is an extension of a previous work which adopted the method of ＂integrating along particle orbit＂ to solve the drift kinetic equation. The formula derived in this paper is used to calculate the dispersion relation of geodesic acoustic mode, which is then compared with that of the gyro-kinetic analytic formula.

Asphericalizing the Light Collection Mirror for the 200-Point Thomson Scattering Diagnostic Installed on the Large Helical Device

Shown is a possibility to make the image of a laser beam over a distance of 2.5 m, formed by the spherical multi-segment mirror installed in LHD, twice sharper by suitably adjusting the inclination of each segment mirror, which is equivalent to making the mirror surface aspherical. This will further enhance the attractiveness of a mirror-based Thomson scattering system.

Study of Electron Orbits for Formation of Toroidal Closed Flux Surface by ECH

Electron orbits under the external vertical field （Bv） and the self poloidal field of the toroidal plasma current in a toroidal geometry are investigated by using analytic model fields in order to search for the conditions of occurence of appropriate confinement asymmetry of fast electrons along the field lines. This asymmetry efficiently and quickly generates a toroidal current, which may close the field lines in ECH-started plasmas. It is analytically shown that the characteristics of confinement asymmetry depend on the product of the major radius and the strength of the external vertical field. The results suggest that in large devices By should be lowered and also some artificial means to speed up the pitch angle scattering for the fast electrons at a higher energy range are beneficial to generate the toroidal current in order to close the filed

Predictions for EAST Divertor Performance

A detailed study of the divertor performance in EAST has been performed for both its double null （DN） and single null （SN） configurations. The results of application of the SOLPS （B2-Eirene） code package to the analysis of the EAST divertor are summarized. In this work, we concentrate on the effects of increased geometrical closure and of magnetic topology variation on the scrape-off layer （SOL） and divertor plasma behavior. The results of numerical predictions for the EAST divertor operational window are also described in this paper. A simple Core-SOL- Divertor （C-S-D） model was applied to investigate the possibility of extending plasma operational space of low hybrid current drive （LHCD） experiments for EAST.

Induced Charge of Spherical Dust Particle on Plasma-facing Wall in Non-uniform Electric Field

Induced charge of a spherical dust particle on a plasma-facing wall was investigated analytically, where non-uniform electric field was applied externally. The one-dimensional nonuniform electrostatic potential was approximated by the polynomial of the normal coordinate toward the wall. The bipolar coordinate was introduced to solve the Laplace equation of the induced electrostatic potential. The boundary condition at the dust surface determines the unknown coefficients of the general solution of the Laplace equation for the induced potential. From the obtained potential the surface induced charge can be calculated. This result allows estimating the effect of the surrounding plasma, which shields the induced charge.

Investigation of Experimental Con6guration for Electron Bernstein Wave Heating on LHD

Investigation of experimental configuration for the electron Bernstein wave （EBW） heating by using the existing electron cyclotron heating （ECH） antennas on LHD was performed. By using an antenna installed in the lower port, direct oblique launching of the extraordinary （X-） mode from the high magnetic field side （HFS） is available. Since the parallel component of the refractive index （NIF） varies during propagation because of the inhomogeneity of the magnetic field, NH can be zero when the launched X-mode crosses the fundamental electron cyclotron resonance （ECR） layer even NⅡ is noonzero initially. In such a condition, if the electron density is above a certain level the obliquely launched X-mode can pass the fundamental ECR layer without being damped out and can be mode-converted to EBW that is absorbed at the Doppler shifted ECR layer. By using an antenna installed in the horizontal port, oblique launching from the lower magnetic field side （LFS） toward the over-dense plasma is available. Excitation of EBW via the mode conversion process of ordinary mode（O）-extraordinary mode（X）-electron Bernstein wave （B） is expected with the O-mode launching toward an appropriate direction. The O-X-B mode conversion rate and the region of power deposition were surveyed by varying the magnetic field strength and the launching direction. The results of the survey suggest that efficient heating in the core region is difficult by using the existing antenna. Rearrangement of the final mirror of the launching antenna may be needed.