Research on flexible display at Ulsan National Institute of Science and Technology

Displays represent information visually,so they have become the fundamental building block to visualize the data of current electronics including smartphones.Recently,electronics have been advanced toward flexible and wearable electronics that can be bent,folded,or stretched while maintaining their performance under various deformations.Here,recent advances in research to demonstrate flexible and wearable displays are reviewed.We introduce these results by dividing them into several categories according to the components of the display:active-matrix backplane,touch screen panel,light sources,integrated circuit for fingerprint touch screen panel,and characterization tests;and we also present mechanical tests in nano-meter scale and visual ergonomics research.

Local dose-dense chemotherapy for triple-negative breast cancer via minimally invasive implantation of 3D printed devices

Dose-dense chemotherapy is the preferred first-line therapy for triple-negative breast cancer(TNBC),a highly aggressive disease with a poor prognosis.This treatment uses the same drug doses as conventional chemotherapy but with shorter dosing intervals,allowing for promising clinical outcomes with intensive treatment.However,the frequent systemic administration used for this treatment results in systemic toxicity and low patient compliance,limiting therapeutic efficacy and clinical benefit.Here,we report local dose-dense chemotherapy to treat TNBC by implanting 3D printed devices with timeprogrammed pulsatile release profiles.The implantable device can control the time between drug releases based on its internal microstructure design,which can be used to control dose density.The device is made of biodegradable materials for clinical convenience and designed for minimally invasive implantation via a trocar.Dose density variation of local chemotherapy using programmable release enhances anti-cancer effects in vitro and in vivo.Under the same dose density conditions,device-based chemotherapy shows a higher anticancer effect and less toxic response than intratumoral injection.We demonstrate local chemotherapy utilizing the implantable device that simulates the drug dose,number of releases,and treatment duration of the dose-dense AC(doxorubicin and cyclophosphamide)regimen preferred for TNBC treatment.Dose density modulation inhibits tumor growth,metastasis,and the expression of drug resistance-related proteins,including p-glycoprotein and breast cancer resistance protein.To the best of our knowledge,local dose-dense chemotherapy has not been reported,and our strategy can be expected to be utilized as a novel alternative to conventional therapies and improve anti-cancer efficiency.

Facile synthesis of accordion-like porous carbon from waste PET bottles-based MIL-53(Al)and its application for high-performance Zn-ion capacitor

It is of great scientific and economic value to recycle waste poly(ethylene terephthalate)(PET)into high-value PET-based metal organic frameworks(MOFs)and further convert it into porous carbon for green energy storage applications.In the present study,a facile and costeffective hydrothermal process was developed to direct recycle waste PET bottles into MIL-53(Al)with a 100% conversation,then the MOFderived porous carbon was assembled into electrodes for high-performance supercapacitors.The results indicated that the as-synthesized carbon exhibited high SSA of 1712 m^(2)g^(-1)and unique accordion-like structure with hierarchical porosity.Benefit to these advantageous characters,the assembled three-electrode supercapacitor displayed high specific capacitances of 391 F g^(-1)at the current density of 0.5 A g^(-1)and good rate capability of 73.6% capacitance retention at 20 A g^(-1)in 6 mol L^(-1)KOH electrolyte.Furthermore,the assembled zinc ion capacitor still revealed outstanding capacitance of 335 F g^(-1)at 0.1 A g^(-1),excellent cycling stability of 92.2% capacitance retention after 10000 cycles and ultra-high energy density of 150.3 Wh kg^(-1)at power density of 90 W kg^(-1)in 3 mol L^(-1)ZnSO_(4)electrolyte.It is believed that the current work provides a facile and effective strategy to recycle PET waste into high-valuable MOF,and further expands the applications of MOF-derived carbons for high-performance energy storage devices,so it is conducive to both pollution alleviation and sustainable economic development.

Effects of Initial and Boundary Conditions on Heavy Rainfall Simulation over the Yellow Sea and the Korean Peninsula:Comparison of ECMWF and NCEP Analysis Data Effects and Verification with Dropsonde Observation

This study evaluated the simulation performance of mesoscale convective system(MCS)-induced precipitation,focusing on three selected cases that originated from the Yellow Sea and propagated toward the Korean Peninsula.The evaluation was conducted for the European Centre for Medium-Range Weather Forecasts(ECMWF)and National Centers for Environmental Prediction(NCEP)analysis data,as well as the simulation result using them as initial and lateral boundary conditions for the Weather Research and Forecasting model.Particularly,temperature and humidity profiles from 3D dropsonde observations from the National Center for Meteorological Science of the Korea Meteorological Administration served as validation data.Results showed that the ECMWF analysis consistently had smaller errors compared to the NCEP analysis,which exhibited a cold and dry bias in the lower levels below 850 hPa.The model,in terms of the precipitation simulations,particularly for high-intensity precipitation over the Yellow Sea,demonstrated higher accuracy when applying ECMWF analysis data as the initial condition.This advantage also positively influenced the simulation of rainfall events on the Korean Peninsula by reasonably inducing convective-favorable thermodynamic features(i.e.,warm and humid lower-level atmosphere)over the Yellow Sea.In conclusion,this study provides specific information about two global analysis datasets and their impacts on MCS-induced heavy rainfall simulation by employing dropsonde observation data.Furthermore,it suggests the need to enhance the initial field for MCS-induced heavy rainfall simulation and the applicability of assimilating dropsonde data for this purpose in the future.

Analysis of Differences in Electrochemical Performance Between Coin and Pouch Cells for Lithium-Ion Battery Applications

Small coin cell batteries are predominantly used for testing lithium-ion batteries(LIBs)in academia because they require small amounts of material and are easy to assemble.However,insufficient attention is given to difference in cell performance that arises from the differences in format between coin cells used by academic researchers and pouch or cylindrical cells which are used in industry.In this article,we compare coin cells and pouch cells of different size with exactly the same electrode materials,electrolyte,and electrochemical conditions.We show the battery impedance changes substantially depending on the cell format using techniques including Electrochemical Impedance Spectroscopy(EIS)and Galvanostatic Intermittent Titration Technique(GITT).Using full cell NCA-graphite LIBs,we demonstrate that this difference in impedance has important knock-on effects on the battery rate performance due to ohmic polarization and the battery life time due to Li metal plating on the anode.We hope this work will help researchers getting a better idea of how small coin cell formats impact the cell performance and help predicting improvements that can be achieved by implementing larger cell formats.

Assembly structures of coastal woody species of eastern South America:Patterns and drivers

Tropical regions have provided new insights into how ecological communities are assembled.In dry coastal communities,water stress has been hypothesized to determine plant assembly structure by favoring preadapted lineages from neighboring ecosystems,consistent with functional clustering.However,it is unclear whether this hypothesis is sufficient to explain how coastal communities in tropical ecosystems are assembled.Here,we test whether water stress or other factors drive community assembly in woody plant communities across the coastal zone of Brazil,a tropical ecosystem.We characterized functional and phylogenetic structures of these communities and determined the underlying environmental factors(e.g.,water stress,historical climate stability,edaphic constraints,and habitat heterogeneity)that drive their community assembly.Assemblages of coastal woody species show geographically varied patterns,including stochastic arrangements,clustering,and overdispersion of species relative to their traits and phylogenetic relatedness.Topographic complexity,water vapor pressure,and soil nutrient availability best explained the gradient in the functional structure.Water deficit,water vapor pressure,and soil organic carbon were the best predictors of variation in phylogenetic structure.Our results support the water-stress conservatism hypothesis on functional and phylogenetic structure,as well as the effect of habitat heterogeneity on functional structure and edaphic constraints on functional and phylogenetic structure.These effects are associated with increased phenotypic and phylogenetic divergence of woody plant assemblages,which is likely mediated by abiotic filtering and niche opportunities,suggesting a complex pattern of ecological assembly.

The Use of Insulin Negatively Impacts the Mortality of Severe COVID-19 in Patients with Type 2 Diabetes—A Systematic Review

Obesity and type 2 diabetes are among the most important risk factors for severe coronavirus disease-19. Some studies have suggested that the use of insulin as a therapeutic agent to treat hyperglycemia and the metabolic abnormalities associated with type 2 diabetes during the acute phase of severe coronavirus disease-19 could have a negative impact on the disease’s progression;however, there is no consensus on this issue. Here, we performed a systematic review in an attempt to answer this important question. We included 29 articles published from December 2019 to August 2023, which reported the outcomes of 3,070,657 patients with severe coronavirus disease-19 that had the diagnosis of diabetes and were treated with either insulin or other glucose-reducing agents. The results show that using insulin as a pharmacological intervention to treat type 2 diabetes in patients with severe coronavirus disease-19 increases the likelihood of mortality by 193%.

Effect of Aqueous Extract of Boscia senegalensis on Hyperglycemia, Hyperlipidemia and Oxidative Stress Induced in Rats

Boscia aqueous extract. senegalensis on hyperglycemia, hyperlipidemia and oxidative stress induced in rats. The aqueous extract was prepared from B. senegalensis seed powders under the extraction conditions: time (10 min), temperature (55˚C) and the ratio of mass of flour/volume of water (3/10 g/mL). Male wistar rats aged 6 to 8 weeks were acclimated and divided into 8 groups of 5 rats each: two normal control groups which received a normal standard diet (3810 kcal/kg), and six test groups which were subjected to a hyperlipidemic diet (5310 Kcal/kg). All groups of animals were fed in this manner for 8 weeks to induce hyperglycemia, hyperlipidemia and oxidative stress. After induction the animals were treated either with distilled water for the normal and negative control groups or with atorvastatin for the positive control group or with the extract of B. senegalensis. (125, 250 and 500 mg/kg) for the test groups. Fasting blood glucose was taken every 7 days during induction. After sacrifice, biochemical and oxidative stress parameters were measured. The aqueous extract of B. senegalensis significantly decreased (p B. senegalensis at a dose of 500 mg/kg has the capacity to reduce blood sugar, improve the quality of the lipid profile and reduce oxidative stress. Thus, the results reveal that the aqueous extract of B. senegalensis has powerful hypoglycemic, hypolipidemic and antioxidant properties.

Thermomechanical Characterization of Three Soils of Abeche in Chad

The study carried out concerns the valorization of agricultural waste for the development of biosourced materials that can be used as insulation in homes. This article is devoted to the influence of gum arabic on the mechanical and thermal properties of clay soils in the town of Abéché. The mechanical tests were carried out using the CBR press equipped with two devices (bending device and compression device). Thermal property such as thermal conductivity was determined by the hot wire method and thermal resistance was derived by calculation. Thus, the tests were carried out on test pieces made from a mixture of clay and gum arabic in solution. The experimental program includes seven formulations (0%, 2%, 4%, 6%, 8%, 10% and 12%). The results obtained showed that the best flexural and compressive strengths are obtained by using gum arabic with a rate of 8% and a maximum stress of 4.3 MPa. In addition, the thermal results also showed that the thermal conductivity decreases when the percentage of gum arabic increases, which makes it possible to increase the thermal resistance, thus confirming the capacity of gum arabic to provide thermal insulation.

Moving Target Landing of a Quadrotor Using Robust Optimal Guaranteed Cost Control

Dear Editor,This letter proposes a robust control strategy for the autonomous landing of a quadrotor on a moving target.Specifically,a force command that consists of a cascade dynamics estimator and an optimal guaranteed cost control law is exploited for the position-loop tracking.Then,an orientation constraint torque command is employed for the attitude-loop tracking such that the quadrotor refrains from flipping during the landing operation.

Remarkably slow corrosion rate of high-purity Mg microalloyed with 0.05wt% Sc

We report that the corrosion resistance of Mg is significantly improved by adding 0.05wt%Sc.Corrosion rates evaluated from weight loss values after room-temperature immersion in 0.6 M NaCl solution for two weeks were 0.27 and 4.0 mm y^(-1)for the high-purity Mg samples with and without microalloyed 0.05wt%Sc,respectively.The beneficial effect of Sc microalloying on the corrosion resistance of Mg is discussed in connection with Sc-induced microstructural modifications.

A REMARK ON LARGE TIME ASYMTOTICS FOR SOLUTIONS OF A NONHOMOGENEOUS VISCOUS BURGERS EQUATION

The existence, uniqueness and regularity of solutions to the Cauchy problem posed for a nonhomogeneous viscous Burger's equation were shown in Chung, Kim and Slemrod [1] by assuming suitable conditions on initial data. Moreover, they derived the asymptotic behaviour of solutions of the Cauchy problem by imposing additional conditions on initial data. In this article, we obtain the same asymptotic behaviour of solutions to the Cauchy problem without imposing additional condition on initial data.

Identification and comparison of the local physicochemical structures of transition metal-based layered double hydroxides for high performance electrochemical oxygen evolution reactions

Layered double hydroxides(LDHs) have attracted considerable attention as a cost effective alternative to the precious iridium-and ruthenium-based electrocatalysts for an oxygen evolution reaction(OER),a bottleneck of water electrolysis for sustainable hydrogen production.Despite their excellent OER performance,the structural and electronic properties of LDHs,particularly during the OER process,remain to be poorly understood.In this study,a series of LDH catalysts is investigated through in situ X-ray absorption fine structure analyses and density functional theory(DFT) calculations.Our experimental results reveal that the LDH catalyst with equal amounts of Ni and Fe(NF-LDH) exhibits the highest OER activity and catalytic life span when compared with its counterparts having equal amounts of Ni and Co(NC-LDH)and Ni only(Ni-LDH).The NF-LDH shows a markedly enhanced OER kinetics compared to the NC-LDH and the Ni-LDH,as proven by the lower overpotentials of 180,240,and 310 mV,respectively,and the Tafel slopes of 35.1,43.4,and 62.7 mV dec^(-1),respectively.The DFT calculations demonstrate that the lowest overpotential of the NF-LDH is associated with the active sites located at the edge planes of NF-LDH in contrast to those located at the basal planes of Ni-LDH and NC-LDH.The current study pinpoints the active sites on various LDHs and presents strategies for optimizing the OER performance of the LDH catalysts.

Recent progress on MOF/MXene nanoarchitectures:A new era in coordination chemistry for energy storage and conversion

The development of urbanization and industrialization leads to rapid depletion of fossil fuels.Therefore,the production of fuel from renewable resources is highly desired.Electrotechnical energy conversion and storage is a benign technique with reliable output and is eco-friendly.Developing an exceptional electrochemical catalyst with tunable properties like a huge specific surface area,porous channels,and abundant active sites is critical points.Recently,Metal-organic frameworks(MOFs)and two-dimensional(2D)transition-metal carbides/nitrides(MXenes)have been extensively investigated in the field of electrochemical energy conversion and storage.However,advances in the research on MOFs are hampered by their limited structural stability and conventionally low electrical conductivity,whereas the practical electrochemical performance of MXenes is impeded by their low porosity,inadequate redox sites,and agglomeration.Consequently,researchers have been designing MOF/MXene nanoarchitectures to overcome the limitations in electrochemical energy conversion and storage.This review explores the recent advances in MOF/MXene nanoarchitectures design strategies,tailoring their properties based on the morphologies(0D,1D,2D,and 3D),and broadening their future opportunities in electrochemical energy storage(batteries,supercapacitors)and catalytic energy conversion(HER,OER,and ORR).The intercalation of MOF in between the MXene layers in the nanoarchitectures functions synergistically to address the issues associated with bare MXene and MOF in the electrochemical energy storage and conversion.This review gives a clear emphasis on the general aspects of MOF/MXene nanoarchitectures,and the future research perspectives,challenges of MOF/MXene design strategies and electrochemical applications are highlighted.

Corrosion characteristics of single-phase Mg-3Zn alloy thin film for biodegradable electronics

Biodegradable metals as electrodes, interconnectors, and device conductors are essential components in the emergence of transient electronics, either for passive implants or active electronic devices, especially in the fields of biomedical electronics. Magnesium and its alloys are strong candidates for biodegradable and implantable conducting materials because of their high conductivity and biocompatibility, in addition to their well-understood dissolution behavior. One critical drawback of Mg and its alloys is their considerably high dissolution rates originating from their low anodic potential, which disturbs the compatibility to biomedical applications. Herein, we introduce a single-phase thin film of a Mg-Zn binary alloy formed by sputtering, which enhances the corrosion resistance of the device electrode, and verify its applicability in biodegradable electronics. The formation of a homogeneous solid solution of single-phase Mg-3Zn was confirmed through X-ray diffraction and transmission electron microscopy. In addition, the dissolution behavior and chemistry was also investigated in various biological fluids by considering the effect of different ion species. Micro-tensile tests showed that the Mg-3Zn alloy electrode exhibited an enhanced yield strain and elongation in relation to a pure Mg electrode. Cell viability test revealed the high biocompatibility rate of the Mg-3Zn binary alloy thin film. Finally, the fabrication of a wireless heater demonstrated the integrability of biodegradable electrodes and highlighted the ability to prolong the lifecycle of thermotherapy-relevant electronics by enhancing the dissolution resistance of the Mg alloy.

Controls of fracturing on porosity in pre-salt carbonate reservoirs

This work aims to improve the understanding of how fracture zones affect carbonate reservoir properties based on observations of a pre-salt well located in the Santos Basin,Brazil.The identification of fracture zones allowed for the observation of a relationship between the occurrence of rock fractures and the silicification,as the latter plays an important role in determining porosity(higher silica content may increase brittleness of the rocks therefore increasing the likelihood of creating fractures zones and fractures may be filled up reducing the total porosity).To support the proposed observation,an integrated study was conducted using borehole imaging,spectroscopy logs,and sidewall core samples.The porosities were defined using nuclear magnetic resonance log analysis,alongside sidewall core samples,and thin sections.The integration of rock samples and well data with seismic analysis was performed to analyze the presence of a regional fault system that could explain high fracture densities as well as observed silica content characteristics.The results show how different types of cement filling up the formation pores affect fracture densities and total porosity.Furthermore,it was possible to infer that the amount of silica content observed in well logs and thin sections relates to hydrothermal fluids reaching out the reservoir through regional fault systems detected in the seismic section.Therefore,this paper supports the comprehension of how diagenetic processes can significantly affect the properties of presalt reservoirs.

Recent Advances in Patterning Strategies for Full‑Color Perovskite Light‑Emitting Diodes

Metal halide perovskites have emerged as promising light-emitting materials for next-generation displays owing to their remarkable material characteristics including broad color tunability,pure color emission with remarkably narrow bandwidths,high quantum yield,and solution processability.Despite recent advances have pushed the luminance efficiency of monochromic perovskite light-emitting diodes(PeLEDs)to their theoretical limits,their current fabrication using the spincoating process poses limitations for fabrication of full-color displays.To integrate PeLEDs into full-color display panels,it is crucial to pattern red–green–blue(RGB)perovskite pixels,while mitigating issues such as cross-contamination and reductions in luminous efficiency.Herein,we present state-of-the-art patterning technologies for the development of full-color PeLEDs.First,we highlight recent advances in the development of efficient PeLEDs.Second,we discuss various patterning techniques of MPHs(i.e.,photolithography,inkjet printing,electron beam lithography and laserassisted lithography,electrohydrodynamic jet printing,thermal evaporation,and transfer printing)for fabrication of RGB pixelated displays.These patterning techniques can be classified into two distinct approaches:in situ crystallization patterning using perovskite precursors and patterning of colloidal perovskite nanocrystals.This review highlights advancements and limitations in patterning techniques for PeLEDs,paving the way for integrating PeLEDs into full-color panels.

Stochastic seismic inversion and Bayesian facies classification applied to porosity modeling and igneous rock identification

We apply stochastic seismic inversion and Bayesian facies classification for porosity modeling and igneous rock identification in the presalt interval of the Santos Basin. This integration of seismic and well-derived information enhances reservoir characterization. Stochastic inversion and Bayesian classification are powerful tools because they permit addressing the uncertainties in the model. We used the ES-MDA algorithm to achieve the realizations equivalent to the percentiles P10, P50, and P90 of acoustic impedance, a novel method for acoustic inversion in presalt. The facies were divided into five: reservoir 1,reservoir 2, tight carbonates, clayey rocks, and igneous rocks. To deal with the overlaps in acoustic impedance values of facies, we included geological information using a priori probability, indicating that structural highs are reservoir-dominated. To illustrate our approach, we conducted porosity modeling using facies-related rock-physics models for rock-physics inversion in an area with a well drilled in a coquina bank and evaluated the thickness and extension of an igneous intrusion near the carbonate-salt interface. The modeled porosity and the classified seismic facies are in good agreement with the ones observed in the wells. Notably, the coquinas bank presents an improvement in the porosity towards the top. The a priori probability model was crucial for limiting the clayey rocks to the structural lows. In Well B, the hit rate of the igneous rock in the three scenarios is higher than 60%, showing an excellent thickness-prediction capability.

Organic X-Ray Image Sensors Using a Medium Bandgap Polymer Donor with Low Dark Current

The development of portable X-ray detectors is necessary for diagnosing fractures in unconscious patients in emergency situations.However,this is quite challenging because of the heavy weight of the scintillator and silicon photodetectors.The weight and thickness of X-ray detectors can be reduced by replacing the silicon layer with an organic photodetectors.This study presents a novel bithienopyrroledione-based polymer donor that exhibits excellent photodetection properties even in a thick photoactive layer(~700 nm),owing to the symmetric backbone and highly soluble molecular structure of bithienopyrroledione.The ability of bithienopyrroledione-based polymer donor to strongly suppress the dark current density(Jd~10−10 A cm^(−2))at a negative bias(−2.0 V)while maintaining high responsivity(R=0.29 A W−1)even at a thickness of 700 nm results in a maximum shot-noise-limited specific detectivity of D_(sh)^(*)=2.18×10^(13)Jones in the organic photodetectors.Printed organic photodetectors are developed by slot-die coating for use in X-ray detectors,which exhibit D_(sh)^(*)=2.73×10^(12)Jones with clear rising(0.26 s)and falling(0.29 s)response times upon X-ray irradiation.Detection reliability is also proven by linear response of the X-ray detector,and the X-ray detection limit is 3 mA.

Multiphase cooperation for multilevel strain accommodation in a single-crystalline BiFeO3 thin film

The functionalities and diverse metastable phases of multiferroic BiFeO3(BFO)thin films depend on the misfit strain.Although mixed phase-induced strain relaxation in multiphase BFO thin films is well known,it is unclear whether a singlecrystalline BFO thin film can accommodate misfit strain without the involvement of its polymorphs.Thus,understanding the strain relaxation behavior is key to elucidating the lattice strain–property relationship.In this study,a correlative strain analysis based on dark-field inline electron holography(DIH)and quantitative scanning transmission electron microscopy(STEM)was performed to reveal the structural mechanism for strain accommodation of a single-crystalline BFO thin film.The nanoscale DIH strain analysis results indicated a random combination of multiple strain states that acted as a primary strain relief,forming irregularly strained nanodomains.The STEM-based bond length measurement of the corresponding strained nanodomains revealed a unique strain accommodation behavior achieved by a statistical combination of multiple modes of distorted structures on the unit-cell scale.The globally integrated strain for each nanodomain was estimated to be close to1.5%,irrespective of the nanoscale strain states,which was consistent with the fully strained BFO film on the SrTiO3 substrate.Density functional theory calculations suggested that strain accommodation by the combination of metastable phases was energetically favored compared to single-phase-mediated relaxation.This discovery allows a comprehensive understanding of strain accommodation behavior in ferroelectric oxide films,such as BFO,with various low-symmetry polymorphs.