Outboard abnormal noise source localization method with curved surface projection based on time delay matching and weighting criterion

An improved localization method consisting of ＂filtering-time delay estimationhyperbolic localization＂ is proposed. Combining the empirical mode decomposition（EMD）and time delay estimation method based on generalized average magnitude difference function,the original signals are decomposed into intrinsic mode function（IMF） components. The energy distribution criterion and spectrum consistency criterion are used to select the IMFs, which can represent the physical characteristics of the source signal. Several sets of signals are applied to estimate the time delay, and then a vector matching criterion is proposed to select the correct time delay estimation. Considering the hydrophones location, a shell model is established and projected to a plane according to the quadrant before the hyperbolic localization. Results of mooring and sailing tests show that the proposed method improves the localization accuracy,and reduces the error caused by time delay estimation.

Structure normal velocity reconstruction withsparse measurement points

To achieve normal velocity reconstruction of a vibrating surface with sparse mea- surement points, a reconstruction method is proposed by exploiting of acoustic radiation modes as expansion functions, which are capable of describing the geometric shape of a vibrating surface. Firstly, acoustic radiation modes of the vibrating surface are calculated and the rela- tionship between normal velocity and acoustic radiation modes is built. Then actual measured normal velocity values are expressed by corresponding acoustic radiation modes and the expan- sion coefficients are calculated. Subsequently, all normal velocity values can be reconstructed by the obtained expansion coefficients. Experimental validations have been performed by a double-layer steel cylindrical shell with enclosed ends in an anechoic water tank. Two cases with different wavenumber components distribution were designed by a vibration shaker and a rotor device respectively. Two experimental results both show that actual vibration distribution cannot be revealed exactly by the sparse measurement points, which corresponds to severe loss of vibration related wavenumber components. On the other hand, normal velocity and corresponding wavenumber components can be restored accurately in both two wavenumber components distribution cases according to the proposed method, which demonstrates obvious effectiveness of the proposed method.