An organic light-emitting diode （OLED） device with high efficiency and brightness is fabricated by inserting CuOJCu dual inorganic buffer layers between indium-tin-oxide （ITO） and hole-transport layer （HTL）. The...An organic light-emitting diode （OLED） device with high efficiency and brightness is fabricated by inserting CuOJCu dual inorganic buffer layers between indium-tin-oxide （ITO） and hole-transport layer （HTL）. The CuOx/Cu buffer layer limits the operating current density obviously, while the brightness and efficiency are both enhanced greatly. The highest brightness of the optimized device is achieved to be 14 000 cd/m2 at current efficiency of 3 cd/A and bias voltage of 15 V, which is about 50% higher than that of the compared device without CuOJCu buffer layer. The highest efficiency is achieved to be 5.9 cd/A at 11.6 V with 3 400 cd/m^2, which is almost twice as high as that of the compared device.展开更多
In this paper,a 64 mm×64 mm matrix polymer solar cell(PSC) was fabricated by air-brush spray deposition.Although the open-circuit voltage(Voc) and the fill factor(FF) both need to be improved,the efficiency of ma...In this paper,a 64 mm×64 mm matrix polymer solar cell(PSC) was fabricated by air-brush spray deposition.Although the open-circuit voltage(Voc) and the fill factor(FF) both need to be improved,the efficiency of matrix PSCs still reaches about 1.82%,and especially the current density achieves nearly 20 m A/cm2.The results verify that air-brush spray deposition is a suitable method to prepare large area PSC devices,and the process we use in this paper can be easily transplanted to roll-to-roll production.展开更多
基金supported by the National Natural Science Foundation of China(No.61274063)
文摘An organic light-emitting diode （OLED） device with high efficiency and brightness is fabricated by inserting CuOJCu dual inorganic buffer layers between indium-tin-oxide （ITO） and hole-transport layer （HTL）. The CuOx/Cu buffer layer limits the operating current density obviously, while the brightness and efficiency are both enhanced greatly. The highest brightness of the optimized device is achieved to be 14 000 cd/m2 at current efficiency of 3 cd/A and bias voltage of 15 V, which is about 50% higher than that of the compared device without CuOJCu buffer layer. The highest efficiency is achieved to be 5.9 cd/A at 11.6 V with 3 400 cd/m^2, which is almost twice as high as that of the compared device.
基金supported by the National Natural Science Foundation of China(No.61274063)
文摘In this paper,a 64 mm×64 mm matrix polymer solar cell(PSC) was fabricated by air-brush spray deposition.Although the open-circuit voltage(Voc) and the fill factor(FF) both need to be improved,the efficiency of matrix PSCs still reaches about 1.82%,and especially the current density achieves nearly 20 m A/cm2.The results verify that air-brush spray deposition is a suitable method to prepare large area PSC devices,and the process we use in this paper can be easily transplanted to roll-to-roll production.
