Experiment Research on Fouling Resistance Grey Forecast Model for Circulating Water in Electromagnetic Field

以自行设计的实验平台为基础，通过获得的不同频率电磁场作用下实验管的污垢热阻及水质参数，建立了电磁场作用下循环水污垢热阻的新陈代谢不等时距加权预测模型和拓灰色预测模型。利用实验数据分析了2种模型的预测精度，拓灰色预测模型较不等时距加权预测模型预测精度更高，计及实验不确定度，预测结果表明2种模型的预测精度均在92％以上，能较精确预测污垢热阻的变化趋势，适应水质参数及环境的变化，为建立多水质参数的数学模型及探索电磁抑垢机制提供参考。

Gas–liquid two-phase flow in serpentine microchannel with different wall wettability

Gas–liquid flow in serpentine microchannel with different surface properties exhibits drastically different flow behavior. With water and air as working fluids, the method of numerical simulation was adopted in this paper based on CLSVOF(coupled level set and volume of fluid method) multiphase model. After verifying the reasonability of the model through experiment, by changing wall properties and Re number(Re<1500), the influences of contact angle and surface roughness on flow regime and Po number were discussed. Moreover, the difference of pressure drop between curve and straight microchannel was also calculated. Beyond that, the combined effect of curve channel and wall properties on flow resistance was analyzed. This paper finds that wall properties have great influence on gas–liquid flow in microchannels not only on flow regime but also flow characteristics. Meanwhile, the pressure drop in curve microchannels is larger than straight. It is more beneficial for fluid flowing when the straight part of microchannel is hydrophilic smooth wall and curve part is hydrophobic with large roughness.

Multi-scale Chaotic Analysis of the Characteristics of Gas-Liquid Two-phase Flow Patterns

Using the high-speed camera the time sequences of the classical flow patterns of horizontal gas-liquid pipe flow are recorded, from which the average gray-scale values of single-frame images are extracted. Thus obtained gray-scale time series is decomposed by the Empirical Mode Decomposition (EMD) method, the various scales of the signals are processed by Hurst exponent method, and then the dual-fractal characteristics are obtained. The scattered bubble and the bubble cluster theories are applied to the evolution analysis of two-phase flow patterns. At the same time the various signals are checked in the chaotic recursion chart by which the two typical characteristics (diagonal average length and Shannon entropy) are obtained. Resulting term of these properties, the dynamic characteristics of gas-liquid two-phase flow patterns are quantitatively analyzed. The results show that the evolution paths of gas-liquid two-phase flow patterns can be well characterized by the integrated analysis on the basis of the gray-scale time series of flowing images from EMD, Hurst exponents and Recurrence Plot (RP). In the middle frequency section (2nd, 3rd, 4th scales), three flow patterns decomposed by the EMD exhibit dual fractal characteristics which represent the dynamic features of bubble cluster, single bubble, slug bubble and scattered bubble. According to the change of diagonal average lengths and recursive Shannon entropy characteristic value, the structure deterministic of the slug flow is better than the other two patterns. After the decomposition by EMD the slug flow and the mist flow in the high frequency section have obvious peaks. Anyway, it is an effective way to understand and characterize the dynamic characteristics of two-phase flow patterns using the multi-scale non-linear analysis method based on image gray-scale fluctuation signals.

Identification Method of Gas-Liquid Two-phase Flow Regime Based on Image Multi-feature Fusion and Support Vector Machine

流动政体的知识为确定是很重要的二阶段的流动系统的压力落下，稳定性和安全。基于图象多特征熔化和支持向量机器，在二阶段的流动识别流动政体的一个新方法被介绍。第一，煤气液体的二阶段的流动想象包括冒泡的流动，塞子流动，蛞蝓流动，成层的流动，起浪的流动，环形的流动和薄雾流动被数字高速度录像系统在水平试管捕获。图象时刻 invariants 和灰色的水平同现矩阵质地特征用处理技术的图象被提取。改进一个多重分类器系统的表演，不平的集合理论被用于减少无关紧要的因素。而且，支持向量机器被使用这些特徵向量作为流动政体样品，和流动政体减少尺寸训练聪明的鉴定被认识到。测试结果证明与不平的集合理论被减少的图象特征能最优地反映支持向量机器能快速并且精确地识别的七典型流动政体，并且成功的训练之间的差别在水平试管的煤气液体的二阶段的流动的七典型流动政体。图象多特征熔化方法提供了一个新方法识别煤气液体的二阶段的流动，并且比单个特征的完成了更高的鉴定能力。全面鉴定精确性是 100% ，并且处理时间的图象的估计是为联机流动政体鉴定的 8 ms。

Influence of laser scanning speed on Cu-Zr-Al composite coatings on Mg alloys

To improve the surface properties of magnesium alloys, a study was conducted on Cu-Zr-A1 composite coatings on AZ91HP magnesium alloy by laser cladding. The influence of laser scanning speed on the microstructures and properties of the coatings was discussed. The coatings consist of amorphous phase, CusZr3, and Cul0ZrT. With the increase of laser scanning speed, the amorphous phase content of the coatings increases and reaches 60.56wt% with the laser scanning speed of 2.0 m/min. Because of the influence of laser scanning speed on the amorphous and crystal phases, the coatings show the maximum elastic modulus, hardness, and wear resistance at the laser scanning speed of 1.0 m/min. At the laser scanning speed of 2.0 m/min, the coatings have the best corrosion resistance.

Comparison of Algorithms for an Electronic Nose in Identifying Liquors

When the electronic nose is used to identify different varieties of distilled liquors, the pattern recognition algorithm is chosen on the basis of the experience, which lacks the guiding principle. In this research, the different brands of distilled spirits were identified using the pattern recognition algorithms （principal component analysis and the artificial neural network）. The recognition rates of different algorithms were compared. The recognition rate of the Back Propagation Neural Network （BPNN） is the highest. Owing to the slow convergence speed of the BPNN, it tends easily to get into a local minimum. A chaotic BPNN was tried in order to overcome the disadvantage of the BPNN. The convergence speed of the chaotic BPNN is 75.5 times faster than that of the BPNN.

Optimum Tilt Angle of Flow Guide in Steam Turbine Exhaust Hood Considering the Effect of Last Stage Flow Field

Abstract Heat transfer and vacuum in condenser are influenced by the aerodynamic performance of steam tur- bine exhaust hood. The current research on exhaust hood is mainly focused on analyzing flow loss and optimal design of its structure without consideration of the wet steam condensing flow and the exhaust hood coupled with the front and rear parts. To better understand the aerodynamic performance influenced by the tilt angle of flow guide inside a diffuser, taking a 600 MW steam turbine as an example, a numerical simulator CFX is adopted to solve compressible three-dimensional （3D） Reynolds time-aver- aged N-S equations and standard k-e turbulence model. And the exhaust hood flow field influenced by different tilt angles of flow guide is investigated with consideration of the wet steam condensing flow and the exhaust hood coupled with the last stage blades and the condenser throat. The result shows that the total pressure loss coefficient and the static pressure recovery coefficient of exhaust hood change regularly and monotonously with the gradual increase of tilt angle of flow guide. When the tilt angle of flow guide is within the range of 30~ to 40~, the static pressure recovery coefficient is in the range of 15.27% to 17.03% and the total pressure loss coefficient drops to approximately 51%, the aerodynamic performance of exhaust hood is significantly improved. And the effectiveenthalpy drop in steam turbine increases by 0.228% to 0.274%. It is feasible to obtain a reasonable title angle of flow guide by the method of coupling the last stage and the condenser throat to exhaust hood in combination of the wet steam model, which provides a practical guidance to flow guide transformation and optimal design in exhaust hood.

Simulation Study on Influence of Steam on Co-gasification of Biomass and Coal in a Fluidized Bed

生物质与煤共气化可解决生物质不易稳定流化以及气化气焦油含量高的问题。文中利用Aspen Plus软件对流化床生物质与煤共气化进行模拟。为了更真实地反映流化床内的实际反应情况，采用嵌入 FORTRAN 气化反应动力学及流体动力学子程序的连续搅拌釜式反应器来代替惯用的Gibbs反应器，结果表明该模型的模拟值与试验值吻合较好。利用灵敏度分析功能研究了水蒸气/物料质量比（S/F）对产气组分、热值和气化效率等参数的影响，结果表明：增大水蒸气与物料质量比有利于氢气产率的提高，当S/F值取0.35~0.45时，气化效率和产气热值较高。

基于相空间重构与数据缩减分频段小波的小通道气液两相流动力学特性分析（英文）

A new method of nonlinear analysis is established by combining phase space reconstruction and data reduction sub-frequency band wavelet. This method is applied to two types of chaotic dynamic systems(Lorenz and Rssler) to examine the anti-noise ability for complex systems. Results show that the nonlinear dynamic system analysis method resists noise and reveals the internal dynamics of a weak signal from noise pollution. On this basis, the vertical upward gas–liquid two-phase flow in a 2 mm × 0.81 mm small rectangular channel is investigated. The frequency and energy distributions of the main oscillation mode are revealed by analyzing the time–frequency spectra of the pressure signals of different flow patterns. The positive power spectral density of singular-value frequency entropy and the damping ratio are extracted to characterize the evolution of flow patterns and achieve accurate recognition of different vertical upward gas–liquid flow patterns(bubbly flow:100%, slug flow: 92%, churn flow: 96%, annular flow: 100%). The proposed analysis method will enrich the dynamics theory of multi-phase flow in small channel.

Removing Cd^(2+) by Composite Adsorbent Nano-Fe_3O_4/Bacterial Cellulose

A new composite adsorbent, nano-Fe3O4/bacterial cellulose（BC）, was prepared through blending method. The process of adsorbing Cd2＋ including its isotherm and kinetics measured was studied. The results show that the adsorption efficiency is improved because of huge surface area and surface coordination of nano-Fe3O4 particles. Its adsorption capacity is 27.97 mg/g and the maximum of Cd2＋ removal is 74%. The adsorption kinetics can be described by pseudo-second rate model and the adsorption equilibrium by Langmuir type. The superparamagnetism of nano-Fe3O4 particles can help to solve the difficult separation of single BC adsorbent and lead to the quick separation of composite adsorbent from the liquid if a magnetic field was applied. Cd2＋ can be desorbed effectively by EDTA and HCl from the composite adsorbent, which can make it be reused.

Biodegradation Kinetics for Pre-treatment of Klebsiella pneumoniae Waste with Autothermal Thermophilic Aerobic Digestion

Biodegradation parameters and kinetic characteristics for pre-treating waste strains of Klebsiella pneu-moniae were studied in laboratory scale with an insulated reactor by an innovative technique,autothermal thermo-philic aerobic digestion(ATAD) . Based on an Arrhenius-type equation,an empirical model was developed to corre-late the removal of total suspended solid(TSS) with the initial TSS concentration,influent reaction temperature,aeration rate and stirring rate. The reaction temperatures of the ATAD system could be raised from the ambient temperatures of 25 °C to a maximum temperature of 65 °C. The exponentials for the initial TSS concentration,aeration rate and stirring rate were 1.579,-0.8175 and-0.6549,respectively,and the apparent activation energy was 6.8774 kJ·mol-1. The correlation coefficient for the pre-exponential factor was 0.9223. The TSS removal effi-ciency predicted by the model was validated with an actual test,showing a maximum relative deviation of 10.79%. The new model has a good practicability.

Improved Simulation Method for Soil-Geogrid Interaction of Reinforced Earth Structure in FEM

The interaction between geogrid and soil is crucial for the stability of geogrid-reinforced earth structure. In finite element (FE) analysis, geogrids are usually assumed as beam or truss elements, and the interaction between geogrid and soil is considered as Coulomb friction resistance, which cannot reflect the true stress and displacement developed in the reinforcement. And the traditional Lagrangian elements used to simulate soil always become highly distorted and lose accuracy in high-stress blocks. An improved geogrid model that can produce shear resistance and passive resistance and a soil model using the Eulerian technique, in combination with the coupled Eulerian-Lagrangian (CEL) method, are used to analyze the interaction between geogrid and soil of reinforced foundation test in ABAQUS. The stress in the backfill, resistance of geogrid, and settlement of foundation were computed and the results of analysis agree well with the experimental results. This simulation method is of referential value for FE analysis of reinforced earth structure.

Review of research on sonar imaging technology in China

Over the past 20 years,sonar imaging technology particularly for the high-technology sector has been a focus of research,in which many developed countries,especially those with coast lines,have been competing with each other.It has seen a rapid development with increasing widespread applications that has played an important and irreplaceable role in underwater exploration with great prospects for social,economic,scientific,and military benefits.The fundamental techniques underlying sonar imaging,including multi-beamforming,synthetic-aperture and inverse synthetic-aperture sonar,acoustic lensing,and acoustical holography,are described in this paper.This is followed by a comprehensive and systematic review on the advantages and disadvantages of these imaging techniques,applicability conditions,development trends,new ideas,new methods,and improvements in old methods over recent years with an emphasis on the situation in China,along with a bold and constructive prediction to some development characteristics of sonar imaging technology in the near future in China.The perspectives presented in this paper are offered with the idea of providing some degree of guidance and promotion of research on sonar imaging technology.

Analysis and Modeling of Wangqing Oil Shale Drying Characteristics in a Novel Fluidized Bed Dryer with Asynchronous Rotating Air Distributor

In order to replace the conventional distributor, a novel asynchronous rotating air distributor, which can optimize the drying ability of fluidized bed and strengthen the drying performance of oil shale particles, is creatively designed in this study. The rotating speed of the asynchronous rotating air distributor with an embedded center disk and an encircling disk is regulated to achieve the different air supply conditions. The impacts of different drying conditions on the drying characteristic of Wangqing oil shale particles are studied with the help of electronic scales. The dynamics of experimental data is analyzed with 9 common drying models. The results indicate that the particles distribution in fluidized bed can be improved and the drying time can be reduced by decreasing the rotating speed of the embedded center disk and increasing the rotating speed of the encircling disk. The drying process of oil shale particles involves a rising drying rate period, a constant drying rate period and a falling drying rate period. Regulating the air distributor rotating speed reasonably will accelerate the shift of particles from the rising drying rate period to the falling drying rate period directly. The two-term model fits properly the oil shale particles drying simulation among 9 drying models at different air supply conditions. Yet the air absorbed in the particles' pores is diffused along with the moisture evaporation, and a small amount of moisture remains on the wall of fluidized bed in each experiment, thus, the values of drying simulation are less than the experimental values.

Numerical Analysis of Cylindrical Cavity Expansion in Sand Considering Particle Crushing and Intermediate Principal Stress

Considering the effects of particle crushing and intermediate principal stress on material yielding strength, the spatial mobilization plane(SMP) yielding criterion and state parameter model including a general critical state line are selected in the analysis of cylindrical cavity expansion.Meanwhile, combining Rowe's flow rule and Bolton's simplification to stress-dilatancy relationship to reflect soil shear dilatancy and softening behavior, this paper analyzes the problem of cylindrical cavity expansion in sand by discretizing the plastic zone, which is applicable to cavity expansions from zero initial radius and finite initial radius simultaneously and can determine stress field, strain field and limit cavity pressure.A series of comparative analyses are made with the results ignoring crushing and based on MohrCoulomb criterion to examine the effects of crushing as well as the coupled effects of crushing and intermediate principal stress on cavity expansion.Results indicate that crushing causes a reduction in limit cavity pressure and void ratio, and results in less stiff response in expansion curves, the amounts of which increase with initial density and mean effective stress.The consideration of crushing can weaken the effects of intermediate principal stress on expansion, while the consideration of intermediate principal stress makes crushing effects become more prominent.The limit cavity pressure can be reduced by over 40% for dense sand with high initial stress based on SMP criterion when crushing is considered.

Robust and Active Fault-tolerant Control for a Class of Nonlinear Uncertain Systems

A novel integrated design strategy for robust fault diagnosis and fault-tolerant control （FTC） of a class of nonlinear uncertain systems is proposed. The uncertainties considered in this paper are more general than those in other existing works, and faults are described in a new formulation. It is proven that the states of a closed-loop system converge asymptotically to zero even if there are uncertainties and faults in a system. Simulation results on a simple pendulum are presented for illustration.

Reliable Memory Feedback Design for a Class of Nonlinear Fuzzy Systems with Time-varying Delay

This paper is concerned with the robust reliable memory controller design for a class of fuzzy uncertain systems with timevarying delay. The system under consideration is more general than those in other existent works. The controller, which is dependent on the magnitudes and derivative of the delay, is proposed in terms of linear matrix inequality （LMI）. The closed-loop system is asymptotically stable for all admissible uncertainties as well as actuator faults. A numerical example is presented for illustration.