Highly Defective Dark TiO_(2) Modified with Pt: Effects of Precursor Nature and Preparation Method on Photocatalytic Properties

The study focused on the modification with platinum of dark defective titania obtained via pulsed laser ablation. Both the method of Pt introduction and the nature of the Pt precursor were varied. All samples exhibited similar phase compositions, specific surface areas, and Pt contents. High-resolution transmission electron microscopy coupled with pulsed CO adsorption revealed increased dispersity when photoreduction and the hydroxonitrate complex (Me _(4) N) _(2) [Pt _(2) (OH) _(2) (NO _(3) ) _(8) ] were used. The sample featured a high content of single-atom species and subnano-sized Pt clusters. The X-ray photoelectron spectroscopy results showed that the photoreduction method facilitated the appearance of a larger number of Pt ^(2+) states, which appeared owing to the strong metal-support interaction (SMSI) eff ect of the transfer of electron density from the electron-saturated defects on the TiO _(2) surface to Pt ^(4+) . In the hydrogen evolution reaction, samples with a significant fraction of the Pt ^(2+) ionic component, capable of generating short-lived Pt^(0) single-atom sites under irradiation due to the SMSI eff ect, exhibited the highest photocatalytic activity. The 0.5Pt(C)/TiO_(2) -Ph sample exhibited the highest hydrogen yield with a quantum efficiency of 0.53, retaining its activity even after 8 h of operation.

Development and testing of a high-power S-band klystron at BINP SB RAS

This paper details the development and testing of the first working prototype of the S-band high-power klystron,accomplished at the Budker Institute of Nuclear Physics,Siberian Branch,Russian Academy of Sciences(BINP SB RAS).Upon testing,the klystron demonstrated the following parameters:an operating frequency of 2856 MHz and a peak power output of 50 MW.The paper presents the klystron's design,its constituent units,and pertinent processing procedures,along with discussions on the measurement of its parameters.

Innovative Development and Commercialization of Technologies： Experience of Technopark ＂Novosibirsk＂

This article is concerned with analyzes of experience of Technopark ＂Novosibirsk＂ as an important part of the innovation infrastructure of the Novosibirsk region. In this article the authors are formulated priorities for the development of an innovative economy： The promotion of investment growth in production infrastructure and innovation, increasing the orientation of research institutions to the needs of the real economy, the development of entrepreneurship in all sectors of the economy and the creation of necessary conditions. The article considers the key elements of innovation infrastructure. Also program ＂Development of high-tech industry and which Technopark ＂Novosibirsk＂ implements the this article is given a brief description of the complex target innovation in the industry to the city of Novosibirsk in 2020＂, in concept of technopark of distributed type, when the Technopark is built in the form of structural and autonomous innovation and technology centers established by the territorial-branch principle in conjunction with partner organizations. The analysis of the stories of success （and failure） of residents of Technopark is described in this article. Based on this analysis, which highlights the main factors contributing to the achievement of commercially meaningful results. These include training as an essential component of the innovation infrastructure. Describes the international educational programs implemented by the Innovative Technology Center ＂Education＂ at the Novosibirsk State University of Economics and Management. It is noted that the most important result of the operation of Technopark ＂Novosibirsk＂ was working out a model of public-private partnership that has allowed Technopark flourish, creating a network of specialized centers of innovation and technology. Finally the authors conclude that at the present time in Russia on almost all the basic elements of support for innovative entrepreneurship are created. At the same time a significant part of the difficulties cause problems originating from the external environment of business innovation

The evolution of refertilized lithospheric mantle beneath the northeastern Siberian craton:Links between mantle metasomatism,thermal state and diamond potential

Although the diamond potential of cratons is linked mainly to thick and depleted Archean lithospheric keels, there are examples of craton-edge locations and circum-cratonic Proterozoic terranes underlain by diamondiferous mantle. Here, we use the results of comprehensive major and trace-element studies of detrital garnets from diamond-rich Late Triassic(Carnian) sedimentary rocks in the northeastern Siberia to constrain the thermal and chemical state of the pre-Triassic mantle and its ability to sustain the diamond storage. The studied detrital mantle-derived garnets are dominated by low-to mediumCr lherzolitic(~45%) and low-Cr megacrystic(~39%) chemistries, with a significant proportion of eclogitic garnets(~11%), and only subordinate contribution from harzburgitic garnets(~5%) with variable CrOcontents(1.2–8.4 wt.%). Low-Cr megacrysts display uniform, “normal” rare-earth element(REE)patterns with no Eu/Eu* anomalies, systematic Zr and Ti enrichment(mainly within 2.5–5), which are evidence of their crystallization from deep metasomatic melts. Lherzolitic(G9) garnets exhibit normal or humped to MREE-depleted sinusoidal REE patterns and elevated Nd/Y(up to 0.33–0.41) and Zr/Y ratios(up to 7.62). Rare low-to high-Cr harzburgitic(G10) garnets have primarily “depleted”, sinusoidal REEpatterns, low Ti, Y and HREE, but vary significantly in Zr-Hf, Ti and MREE-HREE contents, Nd/Y(within 0.1–2.4) and Zr/Y(1.53–19.9) ratios. The observed trends of chemical enrichment from the most depleted,harzburgitic garnets towards lherzolitic(including high-Ti high-Cr G11-type) garnets and megacrysts result from either voluminous high-temperature metasomatism by plume-derived silicate melts or recurrent mobilization of less voluminous kimberlitic or related carbonated mantle melts, rather than the initially primitive, fertile nature of the Proterozoic SCLM. Calculated Ni-in-garnet temperatures(primarily within ~1150–1250 ℃) indicate their derivation from at least ~220 km thick Cr-undersaturated lithosphere at the relevant Devonian to Triassic thermal flow of ~45 m W/m^(2) or cooler. We suggest the existence of rare harzburgitic domains in the primarily lherzolitic diamond-facies SCLM beneath the northeastern Siberian craton at least by Triassic, whereas the abundance of eclogitic garnets, predominance of E-type inclusions in placer diamonds and specific morphologies argue for diamondiferous eclogites occurring within a ~50–65 kbar diamond window of the Olenek province by the same time.

Thermodynamic Modeling of Uranium (VI) Reductive Immobilization in Groundwater of NPCC Sludge Storages (Novosibirsk, Russia)

The Biochemical Reduction Of Both Nitrate And Sulfate In U-Containing Aquifers Of The Novosibirsk Plant Of Chemical Concentrates (NPCC) Was Investigated Experimentally And Thermodynamically. It Was Observed That Decrease In Eh Up To -397 Mv Has A Distinct Effect On The Denitrification And Uranium Precipitation As UO2(S). Nitrate Was Denitrified With A Temporary Accumulation Of The Intermediate Nitrite On The Day 4th. According To The X-Ray Fluorescence Analysis And Thermodynamic Calculations, More Than Half Of The Uranium Is Deposited In The First Stage As UO2+X oxides, And The Rest, Together With The Sulfides In The Reducing Environment. Findings Suggest That Accurately Thermodynamic Predicting Of Groundwater NO3-;?And SO42- Fate Is Primarily Limited By Failing To Account For A Kinetic Of Redox Fluctuations In The Experiment: 1) Measured Eh +190 Mv Is Low Despite The High Amount Of Nitrates (1124 Mg/L), But NH4+ Predominates In Solution According To Calculations, 2) Sulfate Reduction Lagged Behind Nitrate Reduction By Approximately 50 Days Unlike Model Simulation.

Stress-strain State and Vibration Frequencies of Blades of the Main Mine Fan Impeller

The paper discusses geometrical characteristics and strength parameters of fan blades equipped with replaceable active part it end ended to improve the fan adjustability owing to replacement or removal of the active part, which allows the fan to maintain a wide range of ventilation modes.

Antitumor efficacy of multi-target in situ vaccinations with CpG oligodeoxynucleotides,anti-OX40,anti-PD1 antibodies,and aptamers

To overcome immune tolerance to cancer,the immune system needs to be exposed to a multi-target action intervention.Here,we investigated the activating effect of CpG oligodeoxynucleotides(ODNs),mesyl phosphoramidate CpG ODNs,anti-OX40 antibodies,and OX40 RNA aptamers on major populations of immunocompetent cells ex vivo.Comparative analysis of the antitumor effects of in situ vaccination with CpG ODNs and anti-OX40 antibodies,as well as several other combinations,such as mesyl phosphoramidate CpG ODNs and OX40 RNA aptamers,was conducted.Antibodies against programmed death 1(PD1)checkpoint inhibitors or their corresponding PD1 DNA aptamers were also added to vaccination regimens for analytical purposes.Four scenarios were considered:a weakly immunogenic Krebs-2 carcinoma grafted in CBA mice;a moderately immunogenic Lewis carcinoma grafted in C57Black/6 mice;and an immunogenic A20 B cell lymphoma or an Ehrlich carcinoma grafted in BALB/c mice.Adding anti-PD1 antibodies(CpG+αOX40+αPD1)to in situ vaccinations boosts the antitumor effect.When to be used instead of antibodies,aptamers also possess antitumor activity,although this effect was less pronounced.The strongest effect across all the tumors was observed in highly immunogenic A20 B cell lymphoma and Ehrlich carcinoma.

Experimental and ab initio study of Ba_(2)Na_(3)(B_(3)O_(6))_(2)F stability in the pressure range of 0–10 GPa

Both numerical and experimental studies of the stability and electronic properties of barium–sodium metaborate Ba_(2)Na_(3)(B_(3)O_(6))_(2)F(P63/m) at pressures up to 10 GPa have been carried out. Electronic-structure calculations with HSE06 hybrid functional showed that Ba_(2)Na_(3)(B_(3)O_(6))_(2)F has an indirect band gap of 6.289 eV. A numerical study revealed the decomposition of Ba_(2)Na_(3)(B_(3)O_(6))_(2)F into the BaB_(2)O_(4),Na BO_(2), and NaF phases above 3.4 GPa at 300 K. Subsequent high-pressure high-temperature experiments performed using ‘Discoverer-1500’DIA-type apparatus at pressures of 3 and 6 GPa and temperature of 1173 K confirmed the stability of Ba_(2)Na_(3)(B_(3)O_(6))_(2)F at 3 GPa and its decomposition into BaB_(2)O_(4), NaBO_(2), and NaF at 6 GPa, which was verified by energy-dispersive X-ray analysis and Raman spectroscopy. The observed Raman bands of the Ba_(2)Na_(3)(B_(3)O_(6))_(2)F phase were assigned by comparing the experimental and calculated spectra. The experimental Raman spectra of decomposition reaction products obtained at 6 GPa suggest the origin of a new high-pressure modification of barium metaborate BaB_(2)O_(4).

Algorithms for automatic measurement of SIS-type hysteretic underdamped Josephson junction’s parameters by current-voltage characteristics

Some electrical parameters of the SIS-type hysteretic underdamped Josephson junction(JJ)can be measured by its current-voltage characteristics(IVCs).Currents and voltages at JJ are commensurate with the intrinsic noise level of measuring instruments.This leads to the need for multiple measurements with subsequent statistical processing.In this paper,the digital algorithms are proposed for the automatic measurement of the JJ parameters by IVC.These algorithms make it possible to implement multiple measurements and check these JJ parameters in an automatic mode with the required accuracy.The complete sufficient statistics are used to minimize the root-mean-square error of parameter measurement.A sequence of current pulses with slow rising and falling edges is used to drive JJ,and synchronous current and voltage readings at JJ are used to realize measurement algorithms.The algorithm performance is estimated through computer simulations.The significant advantage of the proposed algorithms is the independence from current source noise and intrinsic noise of current and voltage meters,as well as the simple implementation in automatic digital measuring systems.The proposed algorithms can be used to control JJ parameters during mass production of superconducting integrated circuits,which will improve the production efficiency and product quality.

The role of wild goose(Anser) populations of Russia and theTibet Plateau in the spread of the avian influenza virus

Wild birds of the orders Anseriformes and Charadriiformes represent a natural reservoir of low pathogenic avian influenza(LPAI) viruses(family Orthomyxoviridae).Wild geese(order Anseriformes)relating to waterfowls undertake extensive migration flights reaching thousands of kilometers.Isolation of the avian influenza virus(AIV) from wild geese is quite low or absent.The aims of this study are to monitor the AIV in different wild goose species,nesting on Russian territory and the Tibet Plateau and to analyze the derived data for the purpose of determining the role of these wild bird species in spreading pathogens.In our study 3245 samples from nine wild goose species in nine regions of Russia and on the territory of the Tibet Plateau(the Xizang Autonomous Region) were tested and no AIV were detected.Our study shows the non-essential role of wild geese in the spread of the AIV over long distances and reaches theconclusion that geese are probably not natural reservoirs for the primary viruses.However,further inquiry of AIV in wild goose populations is required.Studies of wild geese and AIV ecology will allow us to obtainmore information about pathogen-host relationships and to make arrangements for the maintenance ofwild goose populations.

泛代数上的Grbner-Shirshov基理论（英文）

综述了域上或交换代数上的线性(Ω-)代数的相应的簇(范畴)的Grbner-Shirshov基理论的新成果,如:结合代数(包括群(半群)代数),自由代数的张量积,李代数,Di-代数,pre-李代数,Rota-Baxter代数,metabelian李代数,L-代数,半环代数,范畴代数,等.其中包含了许多应用,尤其是给出了一些著名结论的新的证明.

Ophiolites of the Central Asian Orogenic Belt:Geochemical and petrological characterization and tectonic settings

We present a compilation of published data(field,petrography,ages and geochemistry)from 73 ophiolitic complexes of the Central Asian Orogenic Belt.The ophiolitic complexes,ranging in age from Neoproterozoic to Triassic.have been geochemically classified as subduction-related and subductionunrelated categories applying recent,well-established discrimination diagrams.The subductionunrelated category is further subdivided into Mid-Ocean Ridge type(MOR),a common rift-drift stage and Plume type,and the subduction-related category is subdivided into Backarc(BA),Forearc(FA).Backarc to Forearc(BA-FA)and Volcanic Arc(VA)types.The four subduction-related types define highly different geochemical features,with the BA and FA types defining end members showing subduction influence of 10%-100%and 90%-100%subduction influence,respectively,and the two other types(BAFA and VA)define values between the two end members.The subduction-related category comprises79%of the examined ophiolites,of which the BA type ophiolites is by far the dominant group,followed by the BA-FA type,and with FA and VA types as subordinate groups.The Neoproterozoic and Ordovician complexes exhibit the highest,whereas those of Silurian age exhibit the lowest subduction-influence.Of the remaining 21%subduction-unrelated ophiolites,the MOR type dominates.Both the subductionrelated and subduction-unrelated types,in particular the latter,are commonly associated with alkaline basalts taken to represent ocean island magmatism.Harzburgite,dunite,gabbro and basalt are the common lithologies in all ophiolite types,whereas the BA-FA,FA and VA types generally contain intermediate to felsic rocks,and in the FA type boninites occur.The subduction-related ophiolites types generally show low metamorphic grade,whereas greenschist.amphibolite and blueschist grades occur in the subduction-unrelated and BA types.The highly different subduction contribution(from 0 to 100%in the MOR and FA,respectively),attest to variable dips of the subducting slab,as well as variable flux of subduction-related elements into the mantle above subducting slabs,from where the ophiolite magmas got their geochemical fingerprints.As most MOR ophiolites get subducted to the deep mantle,the subduction-related ophiolites have become a dominant ophiolitic type on Earth’s surface through all times supporting the idea about the early start of Plate Tectonics.

西伯利亚北极地区含油气盆地的水文地球化学特征

通过对过去40年收集的西伯利亚北极地区水文地球化学数据进行分析及综合解释,对数据进行了分类、评价和统计分析,评估区域背景值和异常值,估算水源之间接近程度的各种相关系数。西伯利亚沉积盆地的古水文地质重建表明,油气藏的水体有3种成因类型:(1)海相沉积过程中形成的水体;(2)渗入盆地内并经历了各个地质时期表生作用的大气降水成因的水体;(3)烃类混合物冷凝形成的水体。油气藏的水文地球化学模式受控于水-岩-气-有机质体系漫长的地质演化过程。西伯利亚北极地区沉积盆地内分布总矿化度为0.2~350.0 g/L的含氯化钠-碳酸氢盐、氯化钠、氯化钙地下水和其他类型的地下水。通过对西伯利亚北极地区地下水的对比分析,发现含有氯化钠组分的样品总矿化度超过250 g/L,表明卤水的形成与蒸发岩的浸出有关。水文地球化学数据分析显示,地下水的成分随其演化而发生非常大的变化,阿纳巴尔—拉普帖夫、西西伯利亚等盆地中生界的地下水处于其化学演化的初始阶段。

Triggers and sources of volatile-bearing plumes in the mantle transition zone

The paper discusses generation of volatile-bearing plumes in the mantle transition zone(MTZ) in terms of mineral-fluid petrology and their related formation of numerous localities of intra-plate bimodal volcanic series in Central and East Asia.The plume generation in the MTZ can be triggered by the tectonic erosion of continental crust at Pacific-type convergent margins and by the presence of water and carbon dioxide in the mantle.Most probable sources of volatiles are the hyclrated/carbonated sediments and basalts and serpentinite of oceanic slabs,which can be subducted down to the deep mantle.Tectonic erosion of continental crust supplies crustal material enriched in uranium and thorium into the mantle,which can serve source of heat in the MTZ.The heating in the MTZ induces melting of subducted slabs and continental crust and mantle upwelling,to produce OIB-type mafic and felsic melts,respectively.

Synergistic effect of combination of surfactant and oxide powder on enhancement of gas hydrates nucleation

In the present work we studied the induction periods of hydrate formation of natural gas in pure water, aqueous solutions of surfactants, and in the presence of surfactant together with aluminum oxide nanopowder, the activity of which as hydrate formation inducer was studied previously. Sodium dodecyl sulfate（SDS） or neonol AF-9-12 were used as the surfactants. It was demonstrated that the addition of either surfactants or aluminum oxide powder under our experimental conditions causes a decrease in the induction period of hydrate formation from;05 min for pure water to 30–35 min for water with additives. In the case of the simultaneous presence of surfactants and aluminum oxide powder in the system, induction period decreased to;0 min. So, the synergistic effect of the combination of surfactant and oxide powder on gas hydrate nucleation was demonstrated. Possible reasons of this effect have been discussed.

Advances in femtosecond laser direct writing of fiber Bragg gratings in multicore fibers:technology,sensor and laser applications

In this article,we review recent advances in the technology of writing fiber Bragg gratings(FBGs)in selected cores of multicore fibers(MCFs)by using femtosecond laser pulses.The writing technology of such a key element as the FBG opens up wide opportunities for the creation of next generation fiber lasers and sensors based on MCFs.The advantages of the technology are shown by using the examples of 3D shape sensors,acoustic emission sensors with spatially multiplexed channels,as well as multicore fiber Raman lasers.

Experimental and numerical investigations of interface properties of Ti6Al4V/CP-Ti/Copper composite plate prepared by explosive welding

Explosive welding technique is widely used in many industries.This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods.Interlayer plays an important role to improve the welding quality and control energy loss during the collision process.In this paper,the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer.Microstructure details of welded composite plate were observed through optical and scanning electron microscope.Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices.Moreover,the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of CueTi,i.e.CuTi,Cu_(2)Ti,CuTi_(2),Cu_(4)Ti,etc.To study the mechanical properties of composite plates,mechanical tests were conducted,including the tensile test,bending test,shear test and Vickers hardness test.Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method,Euler and Arbitrary Lagrangian-Eulerian method.The multi-physics process of explosive welding,including detonation,jetting and interface morphology,was observed with simulation.Moreover,simulated plastic strain,temperature and pressure profiles were analysed to understand the welding conditions.Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates.At the collision point,both alloys behave like fluids,resulting in the formation of a wavy morphology with vortices,which is in good agreement with the experimental results.

The Mg-carbonate-Fe interaction:Implication for the fate of subducted carbonates and formation of diamond in the lower mantle

The fate of subducted carbonates in the lower mantle and at the core-mantle boundary was modelled via experiments in the MgCO3-Fe^0 system at 70-150 GPa and 800-2600 Kin a laser-heated diamond anvil cell.Using in situ synchrotro n X-ray diffraction and ex situ transmission electron microscopy we show that the reduction of Mg-carbonate can be exemplified by:6 MgCO3+19 Fe=8 FeO+10(Mg0.6Fe^0.4)O+Fe7 C3+3 C.The presented results suggest that the interaction of carbonates with Fe^0 or Fe^0-bearing rocks can produce Fe-carbide and diamond,which can accumulate in the D"region,depending on its carbon to Fe ratio.Due to the sluggish kinetics of the transformation,diamond can remain metastable at the core-mantle boundary(CMB)unless it is in a direct contact with Fe-metal.In addition,it can be remobilized by redox melting accompanying the generation of mantle plumes.

Comparison of explosive welding of pure titanium/SUS 304 austenitic stainless steel and pure titanium/SUS 821L1 duplex stainless steel

Pure commercial titanium was welded with two types of stainless steel,namely SUS 304 austenitic stainless steel and SUS 821L1 duplex stainless steel.The wavy interface of SUS 821L1 was smaller than that of SUS 304.The vortex zone was observed from both longitudinal and transverse directions,and its composition was analyzed.The interface of Ti/SUS 821L11 was able to bear 401−431 MPa shear load while that of Ti/SUS 304 could withstand 352−387 MPa.The weldability window was used to analyze experimental phenomenon.Furthermore,the smoothed particle hydrodynamics(SPH)numerical simulation method was used to simulate the wavy interface.The trend of wavelength and amplitude change with strength and the stand-offs was consistent with the experimental results.

Experimental study of compressible boundary layer on a cone at angles of attack

Experimental study was conducted for boundarylayers on a sharp 5° half-angle cone of 400mm length at angles of attack. The model was tested in the T-326 hypersonic wind tunnel （ITAM） at freestream Mach number M = 5.95. Mean and fluctuation wall characteristics of the boundary layer are measured at 0°, 2°, 3° and 4° angles of attack for different stagnation pressures. Pulsation measurements are carried out by means of ALTP sensor. Pressure and temperature distributions along the model are obtained, and transition beginning and end locations have been found. Boundary layer stabilization with the increase of angle of attack and the decrease of stagnation pressure is observed. High frequency pulsations inherent to hypersonic boundary layer （second mode） have been detected.