A wavelength division multiplexer based on curved polymer planar waveguide is proposed. According to the coupled modetheory and the waveguide structure, the performance of the curved waveguide coupler (CWC) is analyze...A wavelength division multiplexer based on curved polymer planar waveguide is proposed. According to the coupled modetheory and the waveguide structure, the performance of the curved waveguide coupler (CWC) is analyzed. The results showthat CWC can accommodate wider multiplexing bandwidth than parallel straight waveguide coupler (SWC) due to thecompensation effect of the effective coupling length. The two variables, curvature radius and minimum spacing, increasethe design flexibility of the waveguide device. A 4-channel wavelength division multiplexing (WDM) system based onCWC is designed. The deviation of the center wavelength, due to the errors of curvature radius and minimum spacingduring fabrication process, is investigated. The smaller the curvature radius and the minimum spacing are, the larger thecentral wavelength deviation caused by the error of the curvature radius and the minimum spacing is, which provides someuseful theoretical basis for the design and the fabrication of polymer waveguide devices.展开更多
A novel method, sputtering K9 glass film, is proposed to solve the surface corrosion of Er-doped phosphate glass during ion-exchange processing for optical waveguide fabrication. The corrosion causes are analyzed to b...A novel method, sputtering K9 glass film, is proposed to solve the surface corrosion of Er-doped phosphate glass during ion-exchange processing for optical waveguide fabrication. The corrosion causes are analyzed to be the intrinsically weak stabilization of phosphate glass structure, hydrophile and weakly acidic property of phosphate radical. Experimental results show that the K9 glass film could not only protect the Er-doped phosphate glass surface from being corroded but also give no influence on the waveguide fabrication. The effect of thickness of K9 glass film on the optical property of waveguide is also investigated and the op- timal thickness is found to be 60―80 nm. It provides a good base for further fabri- cation of active phosphate glass optical waveguide devices.展开更多
基金This work was partially supported by the National Natural ScienceFoundation of China (No.60577014)the Young Teacher Cultiva-tion Foundation of Dalian University of Technology (No. 893210)the Doctor Start-up Foundation of Dalian University of Tech-nology (No. 893322).
文摘A wavelength division multiplexer based on curved polymer planar waveguide is proposed. According to the coupled modetheory and the waveguide structure, the performance of the curved waveguide coupler (CWC) is analyzed. The results showthat CWC can accommodate wider multiplexing bandwidth than parallel straight waveguide coupler (SWC) due to thecompensation effect of the effective coupling length. The two variables, curvature radius and minimum spacing, increasethe design flexibility of the waveguide device. A 4-channel wavelength division multiplexing (WDM) system based onCWC is designed. The deviation of the center wavelength, due to the errors of curvature radius and minimum spacingduring fabrication process, is investigated. The smaller the curvature radius and the minimum spacing are, the larger thecentral wavelength deviation caused by the error of the curvature radius and the minimum spacing is, which provides someuseful theoretical basis for the design and the fabrication of polymer waveguide devices.
基金the Optical Science and Technology Foundation of Shanghai Technology Committee (Grant No. 022261009)the Young Teacher Cultivation Foundation of Dalian University of Technology (Grant No. 893210)the Doctor Startup Foundation of Dalian University of Tech-nology (Grant No. 893322)
文摘A novel method, sputtering K9 glass film, is proposed to solve the surface corrosion of Er-doped phosphate glass during ion-exchange processing for optical waveguide fabrication. The corrosion causes are analyzed to be the intrinsically weak stabilization of phosphate glass structure, hydrophile and weakly acidic property of phosphate radical. Experimental results show that the K9 glass film could not only protect the Er-doped phosphate glass surface from being corroded but also give no influence on the waveguide fabrication. The effect of thickness of K9 glass film on the optical property of waveguide is also investigated and the op- timal thickness is found to be 60―80 nm. It provides a good base for further fabri- cation of active phosphate glass optical waveguide devices.
