Application of 9-component S-wave 3D seismic data to study sedimentary facies and reservoirs in a biogasbearing area:A case study on the Pleistocene Qigequan Formation in Taidong area,Sanhu Depression,Qaidam Basin,NW China

To solve the problems in restoring sedimentary facies and predicting reservoirs in loose gas-bearing sediment,based on seismic sedimentologic analysis of the first 9-component S-wave 3D seismic dataset of China,a fourth-order isochronous stratigraphic framework was set up and then sedimentary facies and reservoirs in the Pleistocene Qigequan Formation in Taidong area of Qaidam Basin were studied by seismic geomorphology and seismic lithology.The study method and thought are as following.Firstly,techniques of phase rotation,frequency decomposition and fusion,and stratal slicing were applied to the 9-component S-wave seismic data to restore sedimentary facies of major marker beds based on sedimentary models reflected by satellite images.Then,techniques of seismic attribute extraction,principal component analysis,and random fitting were applied to calculate the reservoir thickness and physical parameters of a key sandbody,and the results are satisfactory and confirmed by blind testing wells.Study results reveal that the dominant sedimentary facies in the Qigequan Formation within the study area are delta front and shallow lake.The RGB fused slices indicate that there are two cycles with three sets of underwater distributary channel systems in one period.Among them,sandstones in the distributary channels of middle-low Qigequan Formation are thick and broad with superior physical properties,which are favorable reservoirs.The reservoir permeability is also affected by diagenesis.Distributary channel sandstone reservoirs extend further to the west of Sebei-1 gas field,which provides a basis to expand exploration to the western peripheral area.

Hydrocarbon accumulation characteristics in basement reservoirs and exploration targets of deep basement reservoirs in onshore China

Based on the global basement reservoir database and the dissection of basement reservoirs in China,the characteristics of hydrocarbon accumulation in basement reservoirs are analyzed,and the favorable conditions for hydrocarbon accumulation in deep basement reservoirs are investigated to highlight the exploration targets.The discovered basement reservoirs worldwide are mainly buried in the Archean and Precambrian granitic and metamorphic formations with depths less than 4500 m,and the relatively large reservoirs have been found in rift,back-arc and foreland basins in tectonic active zones of the Meso-Cenozoic plates.The hydrocarbon accumulation in basement reservoirs exhibits the characteristics in three aspects.First,the porous-fractured reservoirs with low porosity and ultra-low permeability are dominant,where extensive hydrocarbon accumulation occurred during the weathering denudation and later tectonic reworking of the basin basement.High resistance to compaction allows the physical properties of these highly heterogeneous reservoirs to be independent of the buried depth.Second,the hydrocarbons were sourced from the formations outside the basement.The source-reservoir assemblages are divided into contacted source rock-basement and separated source rock-basement patterns.Third,the abnormal high pressure in the source rock and the normal–low pressure in the basement reservoirs cause a large pressure difference between the source rock and the reservoirs,which is conducive to the pumping effect of hydrocarbons in the deep basement.The deep basement prospects are mainly evaluated by the factors such as tectonic activity of basement,source-reservoir combination,development of large deep faults(especially strike-slip faults),and regional seals.The Precambrian crystalline basements at the margin of the intracontinental rifts in cratonic basins,as well as the Paleozoic folded basements and the Meso-Cenozoic fault-block basements adjacent to the hydrocarbon generation depressions,have favorable conditions for hydrocarbon accumulation,and thus they are considered as the main targets for future exploration of deep basement reservoirs.

Experiment of dynamic seepage of tight/shale oil under matrix fracture coupling

A physical simulation method with a combination of dynamic displacement and imbibition was established by integrating nuclear magnetic resonance(NMR)and CT scanning.The microscopic production mechanism of tight/shale oil in pore throat by dynamic imbibition and the influencing factors on the development effect of dynamic imbibition were analyzed.The dynamic seepage process of fracking-soaking-backflow-production integration was simulated,which reveals the dynamic production characteristics at different development stages and their contribution to enhancing oil recovery(EOR).The seepage of tight/shale reservoirs can be divided into three stages:strong displacement and weak imbibition as oil produced rapidly by displacement from macropores and fractures,weak displacement and strong imbibition as oil produced slowly by reverse imbibition from small pores,and weak displacement and weak imbibition at dynamic equilibrium.The greater displacement pressure results in the higher displacement recovery and the lower imbibition recovery.However,if the displacement pressure is too high,the injected water is easy to break through the front and reduce the recovery degree.The higher the permeability,the greater the imbibition and displacement recovery,the shorter the time of imbibition balance,and the higher the final recovery.The fractures can effectively increase the imbibition contact area between matrix and water,reduce the oil-water seepage resistance,promote the oil-water displacement between matrix and fracture,and improve the oil displacement rate and recovery of the matrix.The soaking after fracturing is beneficial to the imbibition replacement and energy storage of the fluid;also,the effective use of the carrying of the backflow fluid and the displacement in the mining stage is the key to enhancing oil recovery.

Numerical Simulation of Oil-Water Two-Phase Flow in Low Permeability Tight Reservoirs Based on Weighted Least Squares Meshless Method

In response to the complex characteristics of actual low-permeability tight reservoirs,this study develops a meshless-based numerical simulation method for oil-water two-phase flow in these reservoirs,considering complex boundary shapes.Utilizing radial basis function point interpolation,the method approximates shape functions for unknown functions within the nodal influence domain.The shape functions constructed by the aforementioned meshless interpolation method haveδ-function properties,which facilitate the handling of essential aspects like the controlled bottom-hole flow pressure in horizontal wells.Moreover,the meshless method offers greater flexibility and freedom compared to grid cell discretization,making it simpler to discretize complex geometries.A variational principle for the flow control equation group is introduced using a weighted least squares meshless method,and the pressure distribution is solved implicitly.Example results demonstrate that the computational outcomes of the meshless point cloud model,which has a relatively small degree of freedom,are in close agreement with those of the Discrete Fracture Model(DFM)employing refined grid partitioning,with pressure calculation accuracy exceeding 98.2%.Compared to high-resolution grid-based computational methods,the meshless method can achieve a better balance between computational efficiency and accuracy.Additionally,the impact of fracture half-length on the productivity of horizontal wells is discussed.The results indicate that increasing the fracture half-length is an effective strategy for enhancing production from the perspective of cumulative oil production.

Progress, challenge and significance of building a carbon industry system in the context of carbon neutrality strategy

Carbon dioxide storage and utilization has become an inevitable trend and choice for sustainable development under the background of global climate change and carbon neutrality.Carbon industry which is dominated by CO_(2) capture,utilization and storage/CO_(2) capture and storage(CCUS/CCS)is becoming a new strategic industry under the goal of carbon neutrality.The sustainable development of carbon industry needs to learn from the experiences of global oil and gas industry development.There are three types of“carbon”in the earth system.Black carbon is the CO_(2) that has not been sequestered or used and remains in the atmosphere for a long time;grey carbon is the CO_(2) that has been fixed or permanently sequestered in the geological body,and blue carbon is the CO_(2) that could be converted into products for human use through biological,physical,chemical and other ways.The carbon industry system covers carbon generation,carbon capture,carbon transportation,carbon utilization,carbon sequestration,carbon products,carbon finance,and other businesses.It is a revolutionary industrial field to completely eliminate“black carbon”.The development of carbon industry technical system takes carbon emission reduction,zero carbon,negative carbon and carbon economy as the connotation,and the construction of a low-cost and energy-efficient carbon industry system based on CCUS/CCS are strategic measures to achieve the goal of carbon neutrality and clean energy utilization globally.This will promote the“four 80%s”transformation of China's energy supply,namely,to 2060,the percentage of zero-carbon new energy in the energy consumption will be over 80%and the CO_(2) emission will be decreased by 80%to ensure the carbon emission reduction of total 80×10^(8) t from the percentage of carbon-based fossil energy in the energy consumption of over 80%,and the percentage of CO_(2) emission from energy of over 80%in 2021.The carbon industry in China is facing three challenges,large CO_(2) emissions,high percentage of coal in energy consumption,and poor innovative system.Three strategic measures are proposed accordingly,including:(1)unswervingly develop carbon industrial system and ensure the achievement of carbon neutrality as scheduled by 2060;(2)vigorously develop new energy sources and promote a revolutionary transformation of China’s energy production and consumption structure;(3)accelerate the establishment of scientific and technological innovation system of the whole CO_(2) industry.It is of great significance for continuously optimization of ecological environment and construction of green earth and ecological earth to develop the carbon industry system,utilize clean energy,and achieve the strategic goal of global carbon neutrality.

Characteristics and discovery significance of the Upper Triassic–Lower Jurassic marine shale oil in Qiangtang Basin,China

Mesozoic marine shale oil was found in the Qiangtang Basin by a large number of hydrocarbon geological surveys and shallow drilling sampling.Based on systematic observation and experimental analysis of outcrop and core samples,the deposition and development conditions and characteristics of marine shale are revealed,the geochemical and reservoir characteristics of marine shale are evaluated,and the layers of marine shale oil in the Mesozoic are determined.The following geological understandings are obtained.First,there are two sets of marine organic-rich shales,the Lower Jurassic Quse Formation and the Upper Triassic Bagong Formation,in the Qiangtang Basin.They are mainly composed of laminated shale with massive mudstone.The laminated organic-rich shale of the Quse Formation is located in the lower part of the stratum,with a thickness of 50–75 m,and mainly distributed in southern Qiangtang Basin and the central-west of northern Qiangtang Basin.The laminated organic-rich shale of the Bagong Formation is located in the middle of the stratum,with a thickness of 250–350 m,and distributed in both northern and southern Qiangtang Basin.Second,the two sets of laminated organic-rich shales develop foliation,and various types of micropores and microfractures.The average content of brittle minerals is 70%,implying a high fracturability.The average porosity is 5.89%,indicating good reservoir physical properties to the level of moderate–good shale oil reservoirs.Third,the organic-rich shale of the Quse Formation contains organic matters of types II1 and II2,with the average TOC of 8.34%,the average content of chloroform bitumen'A'of 0.66%,the average residual hydrocarbon generation potential(S1+S2)of 29.93 mg/g,and the Ro value of 0.9%–1.3%,meeting the standard of high-quality source rock.The organic-rich shale of the Bagong Formation contains mixed organic matters,with the TOC of 0.65%–3.10%and the Ro value of 1.17%–1.59%,meeting the standard of moderate source rock.Fourth,four shallow wells(depth of 50–250 m)with oil shows have been found in the organic shales at 50–90 m in the lower part of the Bagong Formation and 30–75 m in the middle part of the Quse Formation.The crude oil contains a high content of saturated hydrocarbon.Analysis and testing of outcrop and shallow well samples confirm the presence of marine shale oil in the Bagong Formation and the Quse Formation.Good shale oil intervals in the Bagong Formation are observed in layers 18–20 in the lower part of the section,where the shales with(S0+S1)higher than 1 mg/g are 206.7 m thick,with the maximum and average(S0+S1)of 1.92 mg/g and 1.81 mg/g,respectively.Good shale oil intervals in the Quse Formation are found in layers 4–8 in the lower part of the section,where the shales with(S0+S1)higher than 1 mg/g are 58.8 m thick,with the maximum and average(S0+S1)of 6.46 mg/g and 2.23 mg/g,respectively.

Development,sand control mechanism and hydrocarbon accumulation of beach-bar sandstone in a saline lake basin:A case from the Neogene of southwestern Qaidam Basin,NW China

Based on the data of field outcrops,drilling cores,casting thin sections,well logging interpretation,oil/gas shows during drilling,and oil/gas testing results,and combined with modern salt-lake sediments in the Qinghai Lake,the Neogene saline lake beach-bars in southwestern Qaidam Basin are studied from the perspective of sedimentary characteristics,development patterns,sand control factors,and hydrocarbon accumulation characteristics.Beach-bar sand bodies are widely developed in the Neogene saline lake basin,and they are lithologically fine sandstone and siltstone,with wavy bedding,low-angle cross bedding,and lenticular-vein bedding.In view of spatial-temporal distribution,the beach-bar sand bodies are stacked in multiple stages vertically,migratory laterally,and extensive and continuous in NW-SE trending pattern in the plane.The stacking area of the Neogene beach-bar sandstone is predicted to be 3000 km^(2).The water salinity affects the sedimentation rate and offshore distance of beach-bar sandstone,and the debris input from the source area affects the scale and enrichment of beach-bar sandstone.The ancient landform controls the morphology and stacking style of beach-bar sandstone,and the northwest monsoon driving effect controls the long-axis extension direction of beach-bar sandstone.The beach-bars have a reservoir-forming feature of“one reservoir in one sand body”,with thick beach-bar sand bodies controlling the effective reservoir distribution and oil-source faults controlling the oil/gas migration and accumulation direction.Three favorable exploration target zones in Zhahaquan,Yingdong-eastern Wunan and Huatugou areas are proposed based on the analysis of reservoir-forming elements.

Low organic matter abundance and highly efficient hydrocarbon generation of saline source rock in the Qaidam Basin,NW China

The geochemical analysis and experimental simulation are comprehensively used to systematically study the hydrocarbon generation material,organic matter enrichment and hydrocarbon generation model of Paleogene source rock in the Western Qaidam Depression,Qaidam Basin,NW China.Three main factors result in low TOC values of saline lacustrine source rock of the Qaidam Basin:relatively poor nutrient supply inhibits the algal bloom,too fast deposition rate causes the dilution of organic matter,and high organic matter conversion efficiency causes the low residual organic carbon.For this type of hydrogen-rich organic matter,due to the reduction of organic carbon during hydrocarbon generation,TOC needs to be restored based on maturity before evaluating organic matter abundance.The hydrocarbon generation of saline lacustrine source rocks of the Qaidam Basin is from two parts:soluble organic matter and insoluble organic matter.The soluble organic matter is inherited from organisms and preserved in saline lacustrine basins.It generates hydrocarbons during low-maturity stage,and the formed hydrocarbons are rich in complex compounds such as NOS,and undergo secondary cracking to form light components in the later stage;the hydrocarbon generation model of insoluble organic matter conforms to the traditional“Tissot”model,with an oil generation peak corresponding to Ro of 1.0%.

A high resolution inversion method for fluid factor with dynamic dryrock V_(P)/V_(S) ratio squared

As an important indicator parameter of fluid identification,fluid factor has always been a concern for scholars.However,when predicting Russell fluid factor or effective pore-fluid bulk modulus,it is necessary to introduce a new rock skeleton parameter which is the dry-rock VP/VS ratio squared(DVRS).In the process of fluid factor calculation or inversion,the existing methods take this parameter as a static constant,which has been estimated in advance,and then apply it to the fluid factor calculation and inversion.The fluid identification analysis based on a portion of the Marmousi 2 model and numerical forward modeling test show that,taking the DVRS as a static constant will limit the identification ability of fluid factor and reduce the inversion accuracy.To solve the above problems,we proposed a new method to regard the DVRS as a dynamic variable varying with depth and lithology for the first time,then apply it to fluid factor calculation and inversion.Firstly,the exact Zoeppritz equations are rewritten into a new form containing the fluid factor and DVRS of upper and lower layers.Next,the new equations are applied to the four parameters simultaneous inversion based on the generalized nonlinear inversion(GNI)method.The testing results on a portion of the Marmousi 2 model and field data show that dynamic DVRS can significantly improve the fluid factor identification ability,effectively suppress illusion.Both synthetic and filed data tests also demonstrate that the GNI method based on Bayesian deterministic inversion(BDI)theory can successfully solve the above four parameter simultaneous inversion problem,and taking the dynamic DVRS as a target inversion parameter can effectively improve the inversion accuracy of fluid factor.All these results completely verified the feasibility and effectiveness of the proposed method.

Carbon and oxygen isotopic constraints on paleoclimate and paleoelevation of the southwestern Qaidam basin, northern Tibetan Plateau

We investigate the growth of the northern Tibetan Plateau and associated climate change by applying oxygen and carbon isotopic compositions in Cenozoic strata in the southwestern Qaidam basin. The X-ray diffraction and isotopic studies reveal that the carbonate minerals are mainly authigenic and they do not preserve any evidence for detrital carbonate and diagenesis. The isotope data show large fluctuations in the δ^(18)O and δ^(13)C values in the middle-late Eocene, indicating relatively warm and seasonal dry climate.The positive correlation of the δ^(18)O and δ^(13)C values in the Oligocene and the positive shift of the δ^(13)C values from the Eocene to Oligocene suggest that the climate changed to arid in the Oligocene. However,the δ^(18) values show negative shift, which is closely related to the global cooling event. During the Miocene, the δ^(13)C values vary between-2‰ and-4‰, whereas the δ^(18)O values show continuous negative shift. The mean δ^(18) values decrease from-8.5‰, in the early Miocene to-10.0‰, in the late Miocene. The stable isotope-based paleoaltimetry results suggest that the elevation of the southwestern Qaidam basin was approximately 1500 m in the middle-late Eocene and Oligocene. Subsequently, during Miocene the crustal uplift process started and the elevation reached approximately 2000 m in the early Miocene and 2500 m in the late Miocene, which suggests large-scale growth of the northern Tibet Plateau during the Miocene.

Cenozoic uplift of the Tibetan Plateau:Evidence from the tectonic-sedimentary evolution of the western Qaidam Basin

Geologists agree that the collision of the Indian and Asian plates caused uplift of the Tibet Plateau. However, controversy still exists regarding the modes and mechanisms of the Tibetan Plateau uplift. Geology has recorded this uplift well in the Qaidam Basin. This paper analyzes the tectonic and sedimentary evolution of the western Qaidam Basin using sub-surface seismic and drill data. The Cenozoic intensity and history of deformation in the Qaidam Basin have been reconstructed based on the tectonic developments, faults growth index, sedimentary facies variations, and the migration of the depositional depressions. The changes in the sedimentary facies show that lakes in the western Qaidam Basin had gone from inflow to still water deposition to withdrawal. Tectonic movements controlled deposition in various depressions, and the depressions gradually shifted southeastward. In addition, the morphology of the surface structures in the western Qaidam Basin shows that the Cenozoic tectonic movements controlled the evolution of the Basin and divided it into （a） the southern fault terrace zone, （b） a central Yingxiongling orogenic belt, and （c） the northern fold-thrust belt; divided by the XI fault （Youshi fault） and Youbei fault, respectively. The field data indicate that the western Qaidam Basin formed in a Cenozoic compressive tectonic environment caused by the India--Asia plate collision. Further, the Basin experienced two phases of intensive tectonic deformation. The first phase occurred during the Middle Eocene--Early Miocene （Xia Ganchaigou Fm. and Shang Ganchaigou Fro., 43.8- 22 Ma）, and peaked in the Early Oligocene （Upper Xia Ganchaigou Fro., 31.5 Ma）. The second phase occurred between the Middle Miocene and the Present （Shang Youshashan Fro. and Qigequan Fro., 14.9-0 Ma）, and was stronger than the first phase. The tectonic--sedimentary evolution and the orienta- tion of surface structures in the western Qaidam Basin resulted from the Tibetan Plateau uplift, and recorded the periodic northward growth of the Plateau. Recognizing this early tectonic--sedimentary evolution supports the previous conclusion that northern Tibet responded to the collision between India and Asia shortly after its initiation. However, the current results reveal that northern Tibet also experi- enced another phase of uplift during the late Neogene. The effects of these two stages of tectonic activity combined to produce the current Tibetan Plateau.

Cenozoic Stratigraphy Deformation History in the Central and Eastern of Qaidam Basin by the Balance Section Restoration and its Implication

The Qaidam Basin, located in the northern margin of the Qinghai-Tibet Plateau, is a large Mesozoic-Cenozoic basin, and bears huge thick Cenozoic strata. The geologic events of the Indian- Eurasian plate-plate collision since -55 Ma have been well recorded. Based on the latest progress in high-resolution stratigraphy, a technique of balanced section was applied to six pieces of northeast- southwest geologic seismic profiles in the central and eastern of the Qaidam Basin to reconstruct the crustal shortening deformation history during the Cenozoic collision. The results show that the Qaidam Basin began to shorten deformation nearly synchronous to the early collision, manifesting as a weak compression, the deformation increased significantly during the Middle and Late Eocene, and then weakened slightly and began to accelerate rapidly since the Late Miocene, especially since the Quaternary, reflecting this powerful compressional deformation and rapid uplift of the northern Tibetan Plateau around the Qaidam Basin.

Geochemical characteristics and genetic types of crude oils from the Tertiary system in the southern part of western Qaidam Basin,Northwest China

Crude oil samples taken from the southern part of western Qaidam Basin were analyzed with GC/MS in order to understand the geochemical characteristics of crude oils.The results reveal that most crude oils are characterized by high abundance of gammacerane and C35 homohopane,which are the representative characteristics of saline lacustrine crude oils.Based on the variation of the ratios of gammacerane/C30 hopane(G/H) and C35 homoho-pane/C34 homohopane(C35/C34H),two crude oil groups,A and B,are identified.Group-A crude oils mainly occurr in the north of the study area,with higher ratios of G/H(>0.8) and C35/C34H(>1.2),whereas group-B crude oils,selected from the south of the study area,show lower ratios of G/H(<0.8) and C35/C34H(<1.0).In addition,group-A crude oils are distinguished into three subgroups in accordance with their different ratios of G/H and C35/C34H and different distribution characteristics of n-alkanes,isoprenoids and steranes.These may be helpful for understanding the distribution characteristics of crude oils in the southern part of western Qaidam Basin and providing clues to the forthcoming exploration of crude oils and gas.

Geological characteristics,evaluation criteria and discovery significance of Paleogene Yingxiongling shale oil in Qaidam Basin,NW China

Major breakthroughs of shale oil exploration have been made recently in the upper member of Paleogene Lower Ganchaigou Formation of Yingxiongling area, Qaidam Basin. However, the low total organic carbon content of saline-lacustrine source rock, and unclear genetic mechanism, evaluation criteria and resources potential of the shale oil have restricted the exploration and evaluation of Yingxiongling shale oil. Through analysis of large amounts of cores, well drilling, seismic, laboratory test data and integrated study, focusing on the shale and mixed types of shale oil reservoirs characterized by high-frequency interbedded organic-rich laminated shale and limy dolomite, it is concluded that the shale oil in the upper member of Lower Ganchaigou Formation in the Yingxiongling area have six geological characteristics:(1) two-stage hydrocarbon generation of hydrogen-rich source rock and large amount of retained oil;(2) multiple types of reservoir space and good reservoir properties;(3)source-reservoir integration, thick “sweet spot” and high oil-bearing grade;(4) high pressure coefficient between and under salt layers, and sufficient formation energy;(5) high content of light components, high gas-oil ratio, and good quality of the crude oil;(6) high content of brittle minerals and good fracability. The evaluation criterion of shale oil is preliminarily established based on the eight parameters: total organic carbon content, maturity, effective porosity, oil saturation, brittle mineral content,pressure coefficient, lamellation density, and burial depth. Combined with parameters of E32 source rock thickness, area, vertical distribution of oil layers, and free hydrocarbon content, the shale oil resources have been preliminarily estimated as 21×10^(8) t.The structurally stable area is the predominant objective of shale oil exploration and the favorable exploration area for Yingxiongling shale oil is nearly 800 km^(2).

Thermal History since the Paleozoic in the Eastern Qaidam Basin,Northwest China

The Qaidam Basin is the one of the three major petroliferous basins in northeastern Tibetan Plateau, which has experienced multiphase superimposition and transformation. The study of thermal history not only plays an important role on revealing the tectonic origin of the Qaidam Basin and the forming mechanism and uplift history of the Tibetan Plateau,but also can provide scientific evidence for the assessment of oil and gas resources. This work used balanced cross-section technique and apatite fission track ages with modeling of fission track length distribution to infer that the eastern Qaidam Basin has experienced significant tectonic movement in the Early Jurassic movement(～200 Ma), which caused the carboniferous uplift and denudation, the geological movement in the Late Cretaceous, characterized by early stretching and late northeast-southwest extrusion; the Himalayan movement in multi-stage development in eastern Qaidam Basin, which can be divided into the early Himalayan movement(41.1–33.6 Ma) and the late Himalayan movement(9.6–7.1 Ma, 2.9–1.8 Ma), and large-scale orogeny caused pre-existing faults reactivated in late Himalayan movement. On the basis of burial history reconstruction, the thermal history of eastern Qaidam Basin was restored. The result shows that the thermal history in eastern Qaidam Basin shows slow cooling characteristics; the paleo-geothermal gradient of eastern Qaidam Basin was 38–41.5℃/km, with an average value of 39.0℃/km in the Late Paleozoic, 29–35.2℃/km, with an average value of 33.0℃/km in the Early Paleogene; the geothermal gradient of the Qaidam Basin increased in the Late Paleogene, which was similar to the present geothermal gradient in the Late Neogene. The characteristics of the tectono-thermal evolution since Paleozoic in the eastern Qaidam Basin are mainly controlled by magmatic thermal events in the study area.

The Existence and Significance of Two Kinds of Effective Reservoirs in Deep Water Area of the Western Qaidam Basin

Objective Deep-water deposit has become one of the greatest potential and economic areas for petroleum exploration.In the western Qaidam Basin,the deep-water sedimentary area account for nearly 2/3 of the basin area,but the related reports is less.Scholars generally believed that the salt water medium can inhibit the extension of the sand(Qian et al.,1984).

AModel for the Optimization of the Shale Gas HorizontalWell Section Based on the Combination of Different Weighting Methods in the Frame of the Game Theory

Existing“evaluation indicators”are selected and combined to build a model to support the optimization of shale gas horizontal wells.Towards this end,different“weighting methods”,including AHP and the so-called entropy method,are combined in the frame of the game theory.Using a relevant test case for the implementation of the model,it is shown that the horizontal section of the considered well is in the middle sweet spot area with good physical properties and fracturing ability.In comparison with the FSI(flow scanner Image)gas production profile,the new model seems to display better abilities for the optimization of horizontal wells.

GENERATION AND ACCUMULATION OF QUATERNARY SHALLOW GAS IN EASTERN QAIDAM BASIN, NW CHINA

This study presents an overview on the geological setting and geochemical characteristics of Pleistocene shallow gas accumulations in eastern Qaidam Basin, NW China. Five largest gas accumulations discovered in this region have a combined enclosure area of about 87 km2 and {7.9} trillion cubic feet (tcf) of proven plus controlled gas reserves. The dominance of methane ({>99.9%}) and the {δ{}{13}C} and δD values of methane ({-68.51‰} to {-65.00‰} and {-227.55‰} to {-221.94‰}, respectively) suggest that these gases are biogenic, derived from the degradation of sedimentary organic matter by methanogens under relatively low temperatures (<75℃). A sufficient supply and adequate preservation of organic matter in the Pleistocene sediments is made possible by the lake basin’s high altitude (2600-3000 m), high water salinity (>15%) and strong stratification. The deposition and extensive lateral occurrence of shore and shallow lake sands/silts in beach sand sheets and small sand bars provided excellent reservoirs for the biogenic gas generated from adjacent rocks. Effective but dynamic gas seals were provided by such factors as intermittent vertical variations in the sediment lithologies, hydraulic trapping due to mudstone water saturation, the hydrocarbon gradient created as a result of gas generation from potential caprocks, and the presence of a regional caprock consisting of 400-800-m-thick mudstones and evaporites. It appears that the most favorable traps for large gas accumulations occur on structural slopes near the major gas kitchen, and the prolific gas pools are often those large gentle anticlines with little faulting complication.

Mixed carbonate rocks lithofacies features and reservoirs controlling mechanisms in a saline lacustrine basin in Yingxi area,Qaidam Basin,NW China

Taking the mixed pre-salt carbonate rocks in the upper member of Eocene Xiaganchaigou Formation(E_(3)^(2))of Yingxi area in the Qaidam Basin as an example,the lithofacies and controlling mechanisms of reservoir formation are analyzed based on a large dataset of cores,thin sections and geochemical analysis.The reservoirs in E_(3)^(2)pre-salt layers have five types of lithofacies,of them,mixed granular calcareous dolostone,massive calcareous dolostone,plaque calcareous dolostone,and laminated dolomtic limestone are of sedimentary origin,and breccia calcareous dolostone is of tectonic origin.The four types of sedimentary lithofacies are divided into two types of saline sedimentary sequence lithofacies combinations,low-energy type in the sag area and low to high-energy type in the slope and paleo-uplift zone in the depression.Affected by high-frequency supply of continental clastic material,the two types of salty sedimentary sequences are mostly incomplete subtypes of lithofacies.Lithofacies have strong impacts on pre-salt reservoirs in E_(3)^(2):(1)Lithofacies type and sedimentary sequence controlled the formation and distribution of dolomite intercrystalline pores and dissolved pores during the pene-sedimentary period.(2)The structure of laminated dolomitic limestone controlled the formation of large-scale laminated fractures and high permeability channels during the diagenetic period.(3)Granular,massive,plaque calcareous dolostones have low mud content and strong brittleness,in the late tectonic reactivation period,the distribution of the three types of lithofacies,together with their distance from the top large slip faults and secondary faults,controlled the formation and distribution of high-efficiency fracture-cave brecciaed calcareous dolostone reservoirs.The above research led to the composite lithofacies-tectonic formation model of pre-salt reservoir in E_(3)^(2)of Yingxi area.The tempo-spatial distribution of tectonic breccia calcareous dolostone reservoirs,laminated dolomitic limestone shale oil reservoirs and granular,massive calcareous dolostone dissolved-intercrystalline pore tight reservoirs in various structural belts of the studied area have been figured out.These findings gave new insights into tight-shale oil accumulation theory in mixed carbonate successions from saline lacustrine basins,aiding in high efficient exploration and development of petroleum in the studied area.

Reservoir Characteristics of Fine-grained Sedimentary Rocks in Saline Lakes in the Cenozoic Upper Ganchaigou Formation,Southwestern Qaidam Basin,NW China

Cenozoic fine-grained sedimentary rocks in the southwestern Qaidam Basin,as typical salinized lacustrine sediments,are significantly different from those in other freshwater lakes under the impact of the high salinity in the lake.Many fine-grained sedimentary rock samples were selected from the lower member of Neogene(N_(1))in the Gaskule Oilfield,Qaidam Basin,northwest China,with the aim to analyze and test their petrology,pore structure,and organic geochemical characteristics and determine its genesis and geological significance.Based on previous results,a new genesis of mixed sedimentary rocks is proposed.The Cenozoic lacustrine fine-grained sedimentary rocks in SW Qaidam Basin belong to mixed sedimentary rocks,which can be divided into three types,including carbonate and terrigenous clastic-bearing mudstone,carbonate-bearing to terrigenous clastic mixed sedimentary rocks,and carbonate-terrigenous clastic mixed sedimentary rocks.The geneses of mixing are quite different from that of mixed marine rocks.According to the sedimentary characteristics of the salinized lakes,three new geneses of mixed deposits are proposed:syn-sedimentary mixing,varve interbedded mixing,and biogenic mixing.The reservoir spaces of the Cenozoic lacustrine fine-grained sedimentary rocks in SW Qaidam Basin include residual intergranular pores,intercrystalline pores,microfractures,and minor dissolved pores.The reservoirs have super-low porosity and ultra-low permeability,with a porosity of 1.82%-21.04%,averaging 7.71%,and permeability of(0.0028-254.86)×10^(−3)μm^(2),averaging 2.82×10^(−3)μm^(2).The test results of total organic carbon(TOC)content show that the highest content of organic carbon reached 1.41%,and those of vitrinite reflectance show that Ro ranges from 0.525%-0.824%,with an average of 0.806%.The organic geochemical characteristics show that the fine-grained mixed sedimentary rocks of SW Qaidam Basin have the potential for self-generation and self-storage.As an unconventional reservoir,it has potential industrial value.This is the first study of fine-grained sedimentary rocks in the Qaidam Basin,which offers certain theoretical and practical values.