C-Si-Mn TRIP steels were produced using the thin slab casting and rolling （TSCR） process under simulation in laboratory. The results of tensile tests show that the yield strength, tensile strength, and the total elo...C-Si-Mn TRIP steels were produced using the thin slab casting and rolling （TSCR） process under simulation in laboratory. The results of tensile tests show that the yield strength, tensile strength, and the total elongation of the experimental TRIP steels are 430 MPa, 610 MPa, and 28.4%, respectively. Optical microscopy, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM） were employed to identify the microstructures of the TRIP steels. The final microstructures consist of ferrite, bainite, and retained austenite. The results of quantitative color metallography show that the fraction of the retained austenite is about 5.8%.展开更多
Spectrum analysis of natural gamma ray spectral logging （SGR） data is a critical part of surface informa- tion processing systems. Due to the low resolution, which is an inherent weakness of SGR, and the low signal-...Spectrum analysis of natural gamma ray spectral logging （SGR） data is a critical part of surface informa- tion processing systems. Due to the low resolution, which is an inherent weakness of SGR, and the low signal-to-noise ratio problem of logging measurements, SGR is usually treated with a low confidence level. The Direct Demodulation （DD） method is an advanced technique to solve modulation equations interactively under physical constraints. It has higher sensitivity and spatial resolution than the traditional methods and can effectively suppress the logging noise. Based on standard count rate spectral data obtained from the China Offshore Oil Logging Company SGR Calibration Facility, this paper presents the application of the DD method to gamma-ray logging. The results are compared with four traditional algorithmic methods, showing that the DD method is a credible choice, with higher sensitivity and higher spatial resolution in gamma-ray log interpretation. The Point-Spread-Function of the Shengli Oil Logging Company＇s natural gamma ray spectroscopy instrument is obtained for the first time. The quantities of various radionuclides in their calibration pits are also obtained. The DD method was applied successfully to gamma-ray logging, offering a new option for SGR logging algorithm selection.展开更多
基金This work was financially supported by the National Natural Science Foundation of China (No.50334010).
文摘C-Si-Mn TRIP steels were produced using the thin slab casting and rolling （TSCR） process under simulation in laboratory. The results of tensile tests show that the yield strength, tensile strength, and the total elongation of the experimental TRIP steels are 430 MPa, 610 MPa, and 28.4%, respectively. Optical microscopy, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM） were employed to identify the microstructures of the TRIP steels. The final microstructures consist of ferrite, bainite, and retained austenite. The results of quantitative color metallography show that the fraction of the retained austenite is about 5.8%.
基金Supported by National High Technology Research and Development Program of China(2013AA064702)National Major Special Well logging Company of Shengli Petroleum Administration Bureau of Sinopec Group(2011ZX05006-002)
文摘Spectrum analysis of natural gamma ray spectral logging （SGR） data is a critical part of surface informa- tion processing systems. Due to the low resolution, which is an inherent weakness of SGR, and the low signal-to-noise ratio problem of logging measurements, SGR is usually treated with a low confidence level. The Direct Demodulation （DD） method is an advanced technique to solve modulation equations interactively under physical constraints. It has higher sensitivity and spatial resolution than the traditional methods and can effectively suppress the logging noise. Based on standard count rate spectral data obtained from the China Offshore Oil Logging Company SGR Calibration Facility, this paper presents the application of the DD method to gamma-ray logging. The results are compared with four traditional algorithmic methods, showing that the DD method is a credible choice, with higher sensitivity and higher spatial resolution in gamma-ray log interpretation. The Point-Spread-Function of the Shengli Oil Logging Company＇s natural gamma ray spectroscopy instrument is obtained for the first time. The quantities of various radionuclides in their calibration pits are also obtained. The DD method was applied successfully to gamma-ray logging, offering a new option for SGR logging algorithm selection.
