A new method for increasing laser induced damage threshold （LIDT） of dielectric antireflection （AR） coating is proposed. Compared with AR film stack of H2.5L （H：HfO2, L：SiO2） on BK7 substrate, SiO2 interracial...A new method for increasing laser induced damage threshold （LIDT） of dielectric antireflection （AR） coating is proposed. Compared with AR film stack of H2.5L （H：HfO2, L：SiO2） on BK7 substrate, SiO2 interracial layer with four quarter wavelength optical thickness （QWOT） is deposited on the substrate before the preparation of H2.5L film. It is found that the introduction of SiO2 interfacial layer with a certain thickness is effective and flexible to increase the LIDT of dielectric AR coatings. The measured LIDT is enhanced by about 50%, while remaining the low reflectivity with less than 0.09% at the center wavelength of 1064 nm. Detailed mechanisms of the LIDT enhancement are discussed.展开更多
文摘A new method for increasing laser induced damage threshold （LIDT） of dielectric antireflection （AR） coating is proposed. Compared with AR film stack of H2.5L （H：HfO2, L：SiO2） on BK7 substrate, SiO2 interracial layer with four quarter wavelength optical thickness （QWOT） is deposited on the substrate before the preparation of H2.5L film. It is found that the introduction of SiO2 interfacial layer with a certain thickness is effective and flexible to increase the LIDT of dielectric AR coatings. The measured LIDT is enhanced by about 50%, while remaining the low reflectivity with less than 0.09% at the center wavelength of 1064 nm. Detailed mechanisms of the LIDT enhancement are discussed.
