Characterization of nanoscale iron and its degradation of 2,4-dichlorophenol

Nanoscale iron was detected by TEM, X-ray diffraction and X-ray photoelectron spectroscopy. It was found that the size of the nanoscale iron particles is in the range of 30?40 nm according to TEM image, and it contains abundant Fe3O4 as passivating layers on the surface of the core-shell structure. To improve its performance, dilute HCl was used for the removal of the passivating layers, and the degradation of 2,4-dichlorophenol (2,4-DCP) was measured for the nanoscale iron samples treated and untreated. Experimental results demonstrated that the removal of 2,4-DCP by untreated nanoscale iron is mainly due to the adsorption of 2, 4-DCP by nanoscale iron, and there are no degradation products detected by HPLC in the process. However, excellent dechlorination of 2,4-DCP was gained by HCl-treated nanoscale iron, and 2-chlorophenol, 4-chlorophenol and phenol were detected during the process. It was concluded that dechlorination is the key reaction pathway for the degradation of 2,4-DCP by activated nanoscale iron, and phenol is found to be the main product.

Dechlorination of 2,4-dichlorophenol by nickel nanoparticles under the acidic conditions

Metal nanoparticles are effective for remediation of contamination with a range of compounds including chlorinated organics.However,the sorption process of the passivation oxide layers on the metal nanoparticle surfaces may result in incomplete degradation of contaminants.This phenomenon can be prevented by an acidic washing procedure or reaction in an acidic medium.In this paper,nickel nanoparticles manufactured via the carbonyl powder process were analyzed using scanning electron microscopy,transmission electron microscopy,X-ray diffraction and energy-dispersive X-ray spectroscopy.The sorption and degradation of 2,4-dichlorophenol (2,4-DCP) by nickel nanoparticles under acidic conditions was then investigated.Transmission electron microscopy and XRD results showed that the nickel nanoparticles range in size from 10 to 20 nm,and a thin passivation layer of NiO is present on the surface.This oxide layer can be removed by pretreatment washing with acidic solutions.It was indicated that dechlorination was the key reaction pathway for degradation of 2,4-DCP by nickel nanoparticles under acidic conditions.The main degradation products were 4-Chlorophenol,2-Chlorophenol,and Phenol,and among these,Phenol was dominant.The acidic medium promoted degradation by providing an appropriate pH,and H+ may be involved in the reaction.Dechlorination of 2,4-DCP by nickel nanoparticles under the acidic condition follows the second order kinetic model,and the rate constants at 298,306,316 K are 0.02,0.2 and 0.3 (g L h)-1,respectively.

Modifying glass fiber surface with grafting acrylamide by UV-grafting copolymerization for preparation of glass fiber reinforced PVDF composite membrane

Experimental design and response surface methodology（RSM） were used to optimize the modification of conditions for glass surface grafting with acrylamide（AM） monomer for preparation of a glass fiber reinforced poly（vinylidene fluoride）（PVDF） composite membrane（GFRP-CM）. The factors considered for experimental design were the UV（ultraviolet）-irradiation time, the concentrations of the initiator and solvent, and the kinds and concentrations of the silane coupling agent. The optimum operating conditions determined were UV-irradiation time of 25 min, an initiator concentration of 0–0.25 wt.%,solvent of N-Dimethylacetamide（DMAC）, and silane coupling agent KH570 with a concentration of 7 wt.%. The obtained optimal parameters were located in the valid region and the experimental confirmation tests conducted showed good accordance between predicted and experimental values. Under these optimal conditions, the water absorption of the grafted modified glass fiber was improved from 13.6% to 23%; the tensile strength was enhanced and the peeling strength of the glass fiber reinforced PVDF composite membrane was improved by 23.7% and 32.6% with an AM concentration at 1 wt.% and 2 wt.%. The surface composition and microstructure of AM grafted glass fiber were studied via several techniques including Field Emission Scanning Electron Microscopy（FESEM）, Fourier transform infrared spectroscopy-attenuated total reflectance（FTIR-ATR） and energy dispersive X-ray spectroscopy（EDX）. The analysis of the EDX and FTIR-ATR results confirmed that the AM was grafted to the glass fiber successfully by detecting and proving the existence of nitrogen atoms in the GFRP-CM.

River basin water resource compensation characteristics by set pair analysis： the Dongiiang example

Flood and drought coexist in many river basins, thus analyses of water resource compensation characteristics become important, since they are the foundation for rational utilization of floodwaters. In this research, set pair analysis （SPA）, a relatively new uncertainty analysis method, is used to study the dry and wet compensation characteristics of water resource para- meters. In addition, fuzzy membership and grey correlation degree are adopted to test the result of set pair analysis. The Dongjiang River is taken as an example and the analyzed parameters include precipitation and mean discharge from different hydrological stations. The results show that there is a high homeotype-encountering chance for precipitation and mean discharge between different stations for both dry and wet conditions; thus the compensation capacity is small. Although the mean discharge is synchronous with the precipitation in the river basin, there exists a certain degree of shift, indicating possible utilization of floodwater on a small scale. The results from SPA are consistent with that from a traditional analysis method, showing that SPA is a promising alternative method for studying river basin water resource compensation characteristics, in particular for exploring potential complements embedded in non- complementary general features.