New glucocerebrosidase antibodies can advance research in the field of neurodegenerative disorders

In medical research,there are times when the introduction of a new tool can launch scientific discovery in new directions.While antibody development may be considered mundane,in the field of glucocerebrosidase(GCase)research,the dearth of validated antibodies for different applications has impeded progress in studies of disease pathogenesis and therapeutic development.The recent introduction of new,rigorously evaluated antibodies can now propel research into the link between glucocerebrosidase and Parkinson’s disease(PD)as well as aspects of the pathobiology of Gaucher disease(Jong et al.,2024).

Research on Quantitative Identification of Three-Dimensional Connectivity of Fractured-Vuggy Reservoirs

The fractured-vuggy carbonate oil resources in the western basin of China are extremely rich.The connectivity of carbonate reservoirs is complex,and there is still a lack of clear understanding of the development and topological structure of the pore space in fractured-vuggy reservoirs.Thus,effective prediction of fractured-vuggy reservoirs is difficult.In view of this,this work employs adaptive point cloud technology to reproduce the shape and capture the characteristics of a fractured-vuggy reservoir.To identify the complex connectivity among pores,fractures,and vugs,a simplified one-dimensional connectivity model is established by using the meshless connection element method(CEM).Considering that different types of connection units have different flow characteristics,a sequential coupling calculation method that can efficiently calculate reservoir pressure and saturation is developed.By automatic history matching,the dynamic production data is fitted in real-time,and the characteristic parameters of the connection unit are inverted.Simulation results show that the three-dimensional connectivity model of the fractured-vuggy reservoir built in this work is as close as 90%of the fine grid model,while the dynamic simulation efficiency is much higher with good accuracy.

Research on uninterruptable power supply technology for auxiliary winding of electric locomotive while passing the neutral section

Purpose–Auxiliary power system is an indispensable part of the train;the auxiliary systems of both electric locomotives and EMUs mainly are powered by one of the two ways,which are either from auxiliary windings of traction transformers or from DC-link voltage of traction converters.Powered by DC-link voltage of traction converters,the auxiliary systems were maintained of uninterruptable power supply with energy from electric braking.Meanwhile,powered by traction transformers,the auxiliary systems were always out of power while passing the neutral section of power supply grid and control system is powered by battery at this time.Design/methodology/approach–Uninterrupted power supply of auxiliary power system powered by auxiliary winding of traction transformer was studied.Failure reasons why previous solutions cannot be realized are analyzed.An uninterruptable power supply scheme for the auxiliary systems powered by auxiliary windings of traction transformers is proposed in this paper.The validity of the proposed scheme is verified by simulation and experimental results and on-site operation of an upgraded HXD3C type locomotive.This scheme is attractive for upgrading practical locomotives with the auxiliary systems powered by auxiliary windings of traction transformers.Findings–This scheme regenerates braking power supplied to auxiliary windings of traction transformers while a locomotive runs in the neutral section of the power supply grid.Control objectives of uninterrupted power supply technology are proposed,which are no overvoltage,no overcurrent and uninterrupted power supply.Originality/value–The control strategies of the scheme ensure both overvoltage free and inrush current free when a locomotive enters or leaves the neutral section.Furthermore,this scheme is cost low by employing updated control strategy of software and add both the two current sensors and two connection wires of hardware.

Research on ECMS Based on Segmented Path Braking Energy Recovery in a Fuel Cell Vehicle

Proton exchange membrane fuel cells are widely regarded as having the potential to replace internal combustion engines in vehicles.Since fuel cells cannot recover energy and have a slow dynamic response,they need to be used with different power sources.Developing efficient energy management strategies to achieve excellent fuel economy is the goal of research.This paper proposes an adaptive equivalent fuel minimum consumption strategy(AECMS)to solve the problem of the poor economy of the whole vehicle caused by the wrong selection of equivalent factors(EF)in traditional ECMS.In this method,the kinematics interval is used to update the equivalent factor by considering the penalty term of energy recovery on SOC changes.Finally,the optimized equivalent factor is substituted into the optimization objective function to achieve efficient energy regulation.Simulation results under the New European Driving Cycle show that compared with the traditional ECMS based on fixed SOC benchmarks,the proposed method improves fuel economy by 1.7%while ensuring vehicle power and increases SOC by 30%.

Analysis on the Changes of Research Hotspots in the Prevention and Treatment of COVID-19 by Traditional Chinese Medicine Based on Knowledge Graph

Objective: To grasp the changing trend of research hotspots of traditional Chinese medicine in the prevention and treatment of COVID-19, and to better play the role of traditional Chinese medicine in the prevention and treatment of COVID-19 and other diseases. Methods: The research literature from 2020 to 2022 was searched in the CNKI database, and CiteSpace software was used for visual analysis. Results: The papers on the prevention and treatment of COVID-19 by traditional Chinese medicine changed from cases, overviews, reports, and efficacy studies to more in-depth mechanism research, theoretical exploration, and social impact analysis, and finally formed a theory-clinical-society Influence-institutional change and other multi-dimensional achievement systems. Conclusion: Analyzing the changing trends of TCM hotspots in the prevention and treatment of COVID-19 can fully understand the important value of TCM, take the coordination of TCM and Western medicine as an important means to deal with public health security incidents, and promote the exploration of the potential efficacy of TCM, so as to enhance the role of TCM in Applications in social stability, emergency security, clinical practice, etc.

Research Progress of Intestinal Flora in Colorectal Cancer

Colorectal cancer, as a common malignant tumor, has been increasing in incidence year by year and has become one of the leading causes of death worldwide. Meanwhile, researchers have found a close relationship between dysbiosis of the gut microbiota and colorectal cancer, which has further triggered indepth exploration of the role of gut microbiota in the pathogenesis, diagnosis, and treatment of colorectal cancer. Studies have shown that there are specific microbial changes in colorectal cancer tissues, including enrichment or depletion of certain bacterial species, which may be associated with tumor growth, invasion, and metastasis. Additionally, gut microbiota has been found to be closely linked to tumor microenvironment, tumor immune response, chemotherapy drug metabolism, and other factors. In this context, it is imperative to study the gut microbiota in colorectal cancer. A comprehensive understanding of the interaction between gut microbiota and colorectal cancer is not only helpful in revealing novel mechanisms of colorectal cancer development, but also holds promise in providing new strategies and targets for early diagnosis, individualized treatment, and prevention of colorectal cancer. This review aims to thoroughly discuss the research progress of gut microbiota in colorectal cancer, including its compositional characteristics, its role in the occurrence and development of colorectal cancer, and its potential clinical applications. The goal is to provide references and insights for further research in this field.

Research on Preparation and Electrochemical Performance of the High Compacted Density Ni-Co-Mn Ternary Cathode Materials

The high compacted density LiNi0.5-xCo0.2Mn0.3MgxO2 cathode material for lithium-ion batteries was synthesized by high temperature solid-state method, taking the Mg element as a doping element and the spherical Ni0.5Co0.2Mn0.3 (OH)2, Li2CO3 as raw materials. The effects of calcination temperature on the structure and properties of the products were investigated. The structure and morphology of cathode materials powder were analyzed by X-ray diffraction spectroscopy (XRD) and scanning electronmicroscopy (SEM). The electrochemical properties of the cathode materials were studied by charge-discharge test and cyclic properties test. The results show that LiNi0.4985Co0.2Mn0.3 Mg0.0015O2 cathode material prepared at calcination temperature 930°C has a good layered structure, and the compacted density of the electrode sheet is above 3.68 g/cm3. The discharge capacity retention rate is more than 97.5% after 100 cycles at a charge-discharge rate of 1C, displaying a good cyclic performance.

Research on Detection Technology of Micro-Components on Circuit Board Based on Digital Image Processing

Aiming at the stability of the circuit board image in the acquisition process,this paper realizes the accurate registration of the image to be registered and the standard image based on the SIFT feature operator and RANSAC algorithm.The device detection model and data set are established based on Faster RCNN.Finally,the number of training was continuously optimized,and when the loss function of Faster RCNN converged,the identification result of the device was obtained.

Research on Modulation Signal Denoising Method Based on Improved Variational Mode Decomposition

In order to further analyze the micro-motion modulation signals generated by rotating components and extract micro-motion features,a modulation signal denoising algorithm based on improved variational mode decomposition(VMD)is proposed.To improve the time-frequency performance,this method decomposes the data into narrowband signals and analyzes the internal energy and frequency variations within the signal.Genetic algorithms are used to adaptively optimize the mode number and bandwidth control parameters in the process of VMD.This approach aims to obtain the optimal parameter combination and perform mode decomposition on the micro-motion modulation signal.The optimal mode number and quadratic penalty factor for VMD are determined.Based on the optimal values of the mode number and quadratic penalty factor,the original signal is decomposed using VMD,resulting in optimal mode number intrinsic mode function(IMF)components.The effective modes are then reconstructed with the denoised modes,achieving signal denoising.Through experimental data verification,the proposed algorithm demonstrates effective denoising of modulation signals.In simulation data validation,the algorithm achieves the highest signal-to-noise ratio(SNR)and exhibits the best performance.

Additive manufacturing of magnesium matrix composites: Comprehensive review of recent progress and research perspectives

The magnesium matrix composites(MMCs) formed by introducing reinforcements to magnesium alloys overcome the limitations of the mechanical properties to a certain extent, presenting unique and excellent properties that any component does not have, such as high specific stiffness and specific strength, good dimensional stability, outstanding shock absorption performance, excellent electromagnetic shielding and hydrogen storage characteristics, etc. As an emerging manufacturing technology, additive manufacturing(AM) is based on the design of threedimensional(3D) data model to obtain 3D objects through layer-by-layer processing, which possesses the advantages of short manufacturing cycle, high material utilization rate, high degree of design freedom, excellent mechanical properties and the ability to fabricate complex structural components. Combining the high stiffness and high strength properties of MMCs and the technical advantages of AM forming complex structural parts with high performance, the prepared AM MMCs have huge potential advantages and broad application prospects in new high-tech industries such as automobile, aerospace, consumer electronics and biomedicine, etc. This paper reviews the research progress in the field of AM MMCs, mainly introduces the main AM technologies, including selective laser melting(SLM), electron beam selective melting(EBSM), laser engineered net shaping(LENS) and wire and arc additive manufacturing(WAAM). The formation mechanism and control methods of the typical defects including balling effect, porosity, poor fusion, loss of alloy elements and cracks produced during AM are discussed. The main challenges of AM MMCs are proposed from the aspects of composition design and the preparation of powder raw material. The relationship between the microstructure and mechanical properties, corrosion performance and biocompatibility of AM MMCs are elaborated in detail. The application potential of AM MMCs in various fields at present and in the future is introduced. Finally, the development direction and urgent problems to be solved in the AM MMCs are prospected.

Research on High Speed Communication Method of ELF-EM While Drilling Based on Adaptive Combined Filtering Algorithm

In terms of the electromagnetic wave measurement while drilling,the extremely low frequency electromagnetic(ELF-EM)signal below 20Hz is usually chosen as the downhole data carrier.To improve the transmission rate of ELF-EM signal and the signal to noise ratio(SNR)at the receiving end,the DQPSK modulation was proposed as the modulation method for the communication of electromagnetic wave system.Different from the traditional IQ orthogonal modulation and coherent demodulation methods,the proposed phase selection modulation and correlation algorithm demodulation are easier to implement and more practical.With regard to the communication synchronization,a fast algorithm,which based on the normalized cross-relation number,was used for waveform matching,and the maximum point of the correlation coefficient was used as the starting point of communication synchronization.The communication simulation results show that the proposed DQPSK modulation signal based on the adaptive combined filtering algorithm has better terminal error rate and transmission rate than the traditional modulation method.Under the same carrier frequency and code width,the transmission rate of DQPSK modulation is 4 to 5 times and 2 times that of PPM modulation and 2DPSK modulation respectively.The communication modulation and demodulation modes as well as the decoding algorithm with combined adaptive filter proposed in this paper can effectively solve practical engineering problems.

Experimental research and application of cold cutting to hot stamping parts based on multiphase microstructure

Among the bottlenecks that hinder the improvement of the production efficiency of hot stamping are high strength and difficulty in edge cutting and hole punching.Starting from the preparation of hot stamping multiphase microstructure materials,this paper developed a plate quenching die system with controllable surface temperature and prepared four types of hot stamping plates with different martensite volume fractions.Then,straight edge cold cutting experiments were performed to study the influence of cutting clearance and cutting force on fracture quality.The results show that the bright zone is the largest when the cutting clearance is 0.14 mm,and the cutting experience coefficient of the hot stamping sheet with each martensite volume fraction is obtained when the cutting clearance is 0.14 mm.The research results of this paper were applied to the production of hot stamping parts.

Endoscopic features and treatments of gastric cystica profunda

BACKGROUND Gastric cystica profunda(GCP)represents a rare condition characterized by cystic dilation of gastric glands within the mucosal and/or submucosal layers.GCP is often linked to,or may progress into,early gastric cancer(EGC).AIM To provide a comprehensive evaluation of the endoscopic features of GCP while assessing the efficacy of endoscopic treatment,thereby offering guidance for diagnosis and treatment.METHODS This retrospective study involved 104 patients with GCP who underwent endoscopic resection.Alongside demographic and clinical data,regular patient followups were conducted to assess local recurrence.RESULTS Among the 104 patients diagnosed with GCP who underwent endoscopic resection,12.5%had a history of previous gastric procedures.The primary site predominantly affected was the cardia(38.5%,n=40).GCP commonly exhibited intraluminal growth(99%),regular presentation(74.0%),and ulcerative mucosa(61.5%).The leading endoscopic feature was the mucosal lesion type(59.6%,n=62).The average maximum diameter was 20.9±15.3 mm,with mucosal involvement in 60.6%(n=63).Procedures lasted 73.9±57.5 min,achieving complete resection in 91.3%(n=95).Recurrence(4.8%)was managed via either surgical intervention(n=1)or through endoscopic resection(n=4).Final pathology confirmed that 59.6%of GCP cases were associated with EGC.Univariate analysis indicated that elderly males were more susceptible to GCP associated with EGC.Conversely,multivariate analysis identified lesion morphology and endoscopic features as significant risk factors.Survival analysis demonstrated no statistically significant difference in recurrence between GCP with and without EGC(P=0.72).CONCLUSION The findings suggested that endoscopic resection might serve as an effective and minimally invasive treatment for GCP with or without EGC.

Lagrangian coherent structure analysis on transport of Acetes chinensis along coast of Lianyungang,China

Spatial heterogeneity or“patchiness”of plankton distributions in the ocean has always been an attractive and challenging scientific issue to oceanographers.We focused on the accumulation and dynamic mechanism of the Acetes chinensis in the Lianyungang nearshore licensed fishing area.The Lagrangian frame approaches including the Lagrangian coherent structures theory,Lagrangian residual current,and Lagrangian particle-tracking model were applied to find the transport pathways and aggregation characteristics of Acetes chinensis.There exist some material transport pathways for Acetes chinensis passing through the licensed fishing area,and Acetes chinensis is easy to accumulate in the licensed fishing area.The main mechanism forming this distribution pattern is the local circulation induced by the nonlinear interaction of topography and tidal flow.Both the Lagrangian coherent structure analysis and the particle trajectory tracking indicate that Acetes chinensis in the licensed fishing area come from the nearshore estuary.This work contributed to the adjustment of licensed fishing area and the efficient utilization of fishery resources.

Using restored two-dimensional X-ray images to reconstruct the three-dimensional magnetopause

Astronomical imaging technologies are basic tools for the exploration of the universe,providing basic data for the research of astronomy and space physics.The Soft X-ray Imager(SXI)carried by the Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)aims to capture two-dimensional(2-D)images of the Earth’s magnetosheath by using soft X-ray imaging.However,the observed 2-D images are affected by many noise factors,destroying the contained information,which is not conducive to the subsequent reconstruction of the three-dimensional(3-D)structure of the magnetopause.The analysis of SXI-simulated observation images shows that such damage cannot be evaluated with traditional restoration models.This makes it difficult to establish the mapping relationship between SXIsimulated observation images and target images by using mathematical models.We propose an image restoration algorithm for SXIsimulated observation images that can recover large-scale structure information on the magnetosphere.The idea is to train a patch estimator by selecting noise–clean patch pairs with the same distribution through the Classification–Expectation Maximization algorithm to achieve the restoration estimation of the SXI-simulated observation image,whose mapping relationship with the target image is established by the patch estimator.The Classification–Expectation Maximization algorithm is used to select multiple patch clusters with the same distribution and then train different patch estimators so as to improve the accuracy of the estimator.Experimental results showed that our image restoration algorithm is superior to other classical image restoration algorithms in the SXI-simulated observation image restoration task,according to the peak signal-to-noise ratio and structural similarity.The restoration results of SXI-simulated observation images are used in the tangent fitting approach and the computed tomography approach toward magnetospheric reconstruction techniques,significantly improving the reconstruction results.Hence,the proposed technology may be feasible for processing SXI-simulated observation images.

Removal of intrahepatic bile duct stone could reduce the risk of cholangiocarcinoma: A single-center retrospective study in South Korea

BACKGROUND Intrahepatic duct(IHD)stones are among the most important risk factors for cholangiocarcinoma(CCC).Approximately 10%of patients with IHD stones develop CCC;however,there are limited studies regarding the effect of IHD stone removal on CCC development.AIM To investigate the association between IHD stone removal and CCC development.METHODS We retrospectively analyzed 397 patients with IHD stones at a tertiary referral center between January 2011 and December 2020.RESULTS CCC occurred in 36 of the 397 enrolled patients.In univariate analysis,chronic hepatitis B infection(11.1%vs 3.0%,P=0.03),carbohydrate antigen 19-9(CA19-9,176.00 vs 11.96 II/mL,P=0.010),stone located in left or both lobes(86.1%vs 70.1%,P=0.042),focal atrophy(52.8%vs 26.9%,P=0.001),duct stricture(47.2%vs 24.9%,P=0.004),and removal status of IHD stone(33.3%vs 63.2%,P<0.001)were significantly different between IHD stone patients with and without CCC.In the multivariate analysis,CA19-9>upper normal limit,carcinoembryonic antigen>upper normal limit,stones located in the left or both lobes,focal atrophy,and complete removal of IHD stones without recurrence were independent factors influencing CCC development.However,the type of removal method was not associated with CCC risk.CONCLUSION Complete removal of IHD stones without recurrence could reduce CCC risk.

Research on Volt/Var Control of Distribution Networks Based on PPO Algorithm

In this paper,a model free volt/var control(VVC)algorithm is developed by using deep reinforcement learning(DRL).We transform the VVC problem of distribution networks into the network framework of PPO algorithm,in order to avoid directly solving a large-scale nonlinear optimization problem.We select photovoltaic inverters as agents to adjust system voltage in a distribution network,taking the reactive power output of inverters as action variables.An appropriate reward function is designed to guide the interaction between photovoltaic inverters and the distribution network environment.OPENDSS is used to output system node voltage and network loss.This method realizes the goal of optimal VVC in distribution network.The IEEE 13-bus three phase unbalanced distribution system is used to verify the effectiveness of the proposed algorithm.Simulation results demonstrate that the proposed method has excellent performance in voltage and reactive power regulation of a distribution network.

Antibacterial mechanism of kojic acid and tea polyphenols against Escherichia coli O157:H7 through transcriptomic analysis

Escherichia coli O157:H7 is one of the major foodborne pathogenic bacterial that cause infectious diseases in humans.The previous found that a combination of kojic acid and tea polyphenols exhibited better activity against E.coli O157:H7 than using either alone.This study aimed to explore responses underlying the antibacterial mechanisms of kojic acid and tea polyphenols from the gene level.The functional enrichment analysis by comparing kojic acid and tea polyphenols individually or synergistically against E.coli O157:H7 found that acid resistance systems in kojic acid were activated,and the cell membrane and genomic DNA were destructed in the cells,resulting in“oxygen starvation”.The oxidative stress response triggered by tea polyphenols inhibited both sulfur uptake and the synthesis of ATP,which affected the bacteria's life metabolic process.Interestingly,we found that kojic acid combined with tea polyphenols hindered the uptake of iron that played an essential role in the synthesis of DNA,respiration,tricarboxylic acid cycle.The results suggested that the iron uptake pathways may represent a novel approach for kojic acid and tea polyphenols synergistically against E.coli O157:H7 and provided a theoretical basis for bacterial pathogen control in the food industry.

Research and Prediction on the Properties of Concrete at Cryogenic Temperature Based on Gray Theory

To solve the cryogenic temperature problems faced by all-concrete liquefied natural gas(ACLNG)storage tanks during servicing,a low temperature resistant and high strength concrete(LHC)was designed from the perspectives of reducing water-binder ratio,removing coarse aggregates,optimizing composite mineral admixture and utilizing steel fibers.The variation laws of compressive and tensile strength,elastic modulus and Poisson’s ratio for C60 concrete and LHC were compared and analyzed under the temperatures from 10 to-165℃through uniaxial compression and tensile tests.The rapid freezing method was adopted to analyze the evolution process of mass and relative dynamic elastic modulus loss rates for C60 and LHC in 0-300 freeze-thaw cycles.The gas permeability test was carried out,and the laws of gas permeability coefficient varied with temperature and cryogenic freeze-thaw cycles were obtained.Then,the grey dynamic model GM(1,1)was used to predict the variation laws of physical and mechanical parameters on the basis of the test data.The test results demonstrate that the compressive strength,elastic modulus and Poisson’s ratio for both C60 and LHC increase significantly from 10 to-165℃,but the specific variation laws are difierent,and there is a phenomenon that some parameters decrease after reaching a critical temperature range for C60.The uniaxial tensile strength increases first and then decreases as temperature decreases,and finally increases slightly at-165℃for both C60 and LHC.The mass and relative dynamic elastic modulus loss rates of LHC are much lower than that of C60 under different freeze-thaw cycles.The gas permeability coefficient of C60 declines gradually with the drop of temperature,and increases gradually with the number of freeze-thaw cycles while the gas permeability coefficient of LHC basically remains stable and is much lower than that of C60.Therefore,such a conclusion can be drawn that LHC has better properties at cryogenic temperature.On the premise of providing consistent functional mode,GM(1,1)can predict the test data with high accuracy,which well reflects the variation laws of relevant parameters.

Recent Progress in Reinforcement Learning and Adaptive Dynamic Programming for Advanced Control Applications

Reinforcement learning(RL) has roots in dynamic programming and it is called adaptive/approximate dynamic programming(ADP) within the control community. This paper reviews recent developments in ADP along with RL and its applications to various advanced control fields. First, the background of the development of ADP is described, emphasizing the significance of regulation and tracking control problems. Some effective offline and online algorithms for ADP/adaptive critic control are displayed, where the main results towards discrete-time systems and continuous-time systems are surveyed, respectively.Then, the research progress on adaptive critic control based on the event-triggered framework and under uncertain environment is discussed, respectively, where event-based design, robust stabilization, and game design are reviewed. Moreover, the extensions of ADP for addressing control problems under complex environment attract enormous attention. The ADP architecture is revisited under the perspective of data-driven and RL frameworks,showing how they promote ADP formulation significantly.Finally, several typical control applications with respect to RL and ADP are summarized, particularly in the fields of wastewater treatment processes and power systems, followed by some general prospects for future research. Overall, the comprehensive survey on ADP and RL for advanced control applications has d emonstrated its remarkable potential within the artificial intelligence era. In addition, it also plays a vital role in promoting environmental protection and industrial intelligence.