A 37 GHz Millimeter-Wave Antenna Array for 5G Communication Terminals

This work presents,design and specific absorption rate(SAR)analysis of a 37GHz antenna,for 5th Generation(5G)applications.The proposed antenna comprises of 4-elements of rectangular patch and an even distribution.The radiating element is composed of copper material supported by Rogers RT5880 substrate of thickness,0.254 mm,dielectric constant(εr),2.2,and loss tangent,0.0009.The 4-elements array antenna is compact in size with a dimension of 8mm×20mm in length and width.The radiating patch is excited with a 50 ohms connector i.e.,K-type.The antenna resonates in the frequency band of 37 GHz,that covers the 5G applications.The antenna behavior is studied both in free space and in the proximity of the human body.Three models of the human body,i.e.,belly,hand,and head(contain skin,fat,muscles,and bone)are considered for on-body simulations.At resonant frequency,the antenna gives a boresight gain of 11.6 dB.The antenna radiates efficiently with a radiated efficiency of more than 90%.Also,it is observed that the antenna detunes to the lowest in the proximity of the human body,but still a good impedance matching is achieved considering the−10 dB criteria.Moreover,SAR is also being presented.The safe limit of 2 W/kg for any 10 g of biological tissue,specified by the European International Electro Technical Commission(IEC)has been considered.The calculated values of SAR for human body models,i.e.,belly,hand and head are 1.82,1.81 and 1.09 W/kg,respectively.The SAR values are less than the international recommendations for the three models.Furthermore,the simulated and measured results of the antenna are in close agreement,which makes it,a potential candidate for the fifth-generation smart phones and other handheld devices.

A broadband cross-polarization conversion anisotropic metasurface based on multiple plasmon resonances

A compact broadband cross-polarization conversion metasurface functioning in the microwave regime is realized and experimentally demonstrated. The metasurface consists of a two-dimensional periodic arrangement of anisotropic double- slit split-ring-resonator-based unit cells printed on top of a dielectric substrate, backed by metallic cladding. The proposed metasurface converts an x- or y-polarized wave into its orthogonal polarization over a fractional bandwidth of 100% from 5- 15 GHz, both for normal as well as oblique incidence. Moreover, the sub-wavelength unit-cell size, thin dielectric substrate, and unique unit-cell design collectively make the response of the metasurface same for both polarizations and insensitive to the incidence angle. The designed structure is fabricated and tested. The measurement and simulation results are found to be consistent with each other.

AMC Integrated Multilayer Wearable Antenna for Multiband WBAN Applications

In this paper,a compact,efficient and easy to fabricate wearable antenna integrated with Artificial Magnetic Conductor(AMC)is presented.Addition of slots and bevels/cuts in the rectangular monopole patch antenna yield a wide bandwidth along with band notches.The proposed antenna is backed with an AMC metasurface that changes the bidirectional radiation pattern to a unidirectional,thus,considerably reducing the Specific Absorption Ratio(SAR).The demonstrated antenna has a good coverage radiating away from the body and presents reduced radiation towards the body with a front-to-back ratio of 13 dB and maximum gain of 3.54 dB.The proposed design operates over a wide frequency band of 2.9 to 12 GHz(exceeding the designated 3.1−10.6 GHz Ultra-Wideband(UWB)band).The band notches were created using slots on the radiating patch in the sub-bands from 5.50 to 5.67 GHz and 7.16 to 7.74 GHz.The overall dimensions of the structure are 33×33×6.75 mm3.The antenna’s radiation performance increased considerably with the addition of the AMC layer.The SAR values for the antenna are reduced by 85.3%when the AMC is used and are 0.083 W/kg which is well below the FCC SAR limits.The simple design,miniaturized profile,low SAR and wide operating bands with multiple band notches make the presented antenna an appealing choice for several UWB wearable body area network(WBAN)applications.