A comparative study for the impact performance of shaped charge JET on UHPC targets

With the development of two-stage munitions(a precursor shaped charge(SC)and a following kinetic energy projectile)to attack the hard concrete targets,as well as the increasing applications of ultra-high performance concrete(UHPC)in both civil and military protective structures,a comparative study on the impact performance of SC formed jet on UHPC target is performed experimentally and numerically at present.Firstly,a series of jet penetration/perforation test on the UHPC,45# steel and UHPC/45# steel composite targets are conducted.By assessing the penetration depth and borehole(crater and tunnel)diameter,the influences of target material and configuration as well as the standoff distance of SC on the impact performance of jet are experimentally discussed.Then,by adopting the 2 D multi-material Arbitrary Lagrange-Euler(ALE)algorithm,Fluid-Structure Interaction(FSI)method and erosion algorithm implemented in the finite element code LS-DYNA,the formation and impact performance of jet in the present test are well reproduced.Finally,based on the validated numerical algorithms,constitutive models and the corresponding parameters,the influences of target material(UHPC,NSC and 45# steel),standoff distance,target configuration(stacked and spaced)and weight efficiency on the impact performance of jet are further discussed.The derived conclusions could provide helpful references for evaluating the ballistic performance of jet and designing the protective structures.

Mesoscopic modelling of UHPCC material under dynamic tensile loadings

This paper presents a new 3D mesoscopic model of ultra-high performance cement-based composite(UHPCC)to investigate its dynamic tensile behavior.In this model,the UHPCC is regarded as a two-phase material composed of cementitious matrix and randomly distributed fibers.The model is established using the commercial software LS-DYNA and involves generating the randomly distributed fiber elements with considerations of diameter,length,orientation and volume fraction,and then fully constraining them with the matrix.In particular,to capture the slipping effect between fibers and matrix that has a strong influence on the dynamic tensile behavior,the fibers are modelled by a fictitious material represented by the load-slip relation.The strain-rate effect of slipping force neglected in most of previous studies is considered by calibrating constitutive parameters of the fictitious material under different strain-rates based on the single fiber pullout tests.Finally,the 3D mesoscopic model is validated against three sets of tension-dominated experiments covered a wide range of loading intensity.Numerical predictions demonstrate that strain-rate effect of slipping force must be considered,and the neglect of it may lead to a great underestimation of the dynamic tensile strength of UHPCC material and would unavoidably underestimate the blast resistance of UHPCC components.

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete(RC) columns are widely used as supporting structures for high-piled wharfs.The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharfs antiknock security.In this study,the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models.Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m,under different explosive quantities(0.025 kg-1.6 kg),stand-off distances(0.0 m-7.0 m),and detonation depths(0.25 m-2.0 m).The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure,acceleration,strain,and displacement.Then,the load distribution characteristics,time history of test data,and damage models related to present conditions were obtained and discussed.Three damage models,including bending failure,bending-shear failure and punching failure,were identified.In addition,the experie nce model of shock wave loads on the surface of a RC column was proposed for engineering application.

A comparative analysis of seismic response of shallow buried underground structure under incident P,SV and Rayleigh waves

In this study,A time-domain seismic response analysis method and a calculation model of the underground structure that can realize the input of seismic P,SV and Rayleigh waves are established,based on the viscoelastic artificial boundary elements and the boundary substructure method for seismic wave input.After verifying the calculation accuracy,a comparative study on seismic response of a shallow-buried,double-deck,double-span subway station structure under incident P,SV and Rayleigh waves is conducted.The research results show that there are certain differences in the cross-sectional internal force distribution characteristics of underground structures under different types of seismic waves.The research results show that there are certain differences in the internal force distribution characteristics of underground structures under different types of seismic waves.At the bottom of the side wall,the top and bottom of the center pillar of the underground structure,the section bending moments of the underground structure under the incidences of SV wave and Rayleigh wave are relatively close,and are significantly larger than the calculation result under the incidence of P wave.At the center of the side wall and the top floor of the structure,the peak value of the cross-sectional internal force under the incident Rayleigh wave is larger than the calculation result under SV wave.In addition,the floor of the underground structure under Rayleigh waves vibrates in both the horizontal and vertical directions,and the magnification effect in the vertical direction is more significant.Considering that the current seismic research of underground structures mainly considers the effect of body waves such as the shear waves,sufficient attention should be paid to the incidence of Rayleigh waves in the future seismic design of shallow underground structures.

Dynamic Camouflage Characteristics of a Thermal Infrared Film Inspired by Honeycomb Structure

Thermal infrared camouflage technology has attracted increasing attention with the progress of infrared surveillance technologies.Inspired by honeycombs,a thermal infrared camouflage film with honeycomb sandwich structure based on fluid and temperature control is proposed to cloak objects and display false targets in the thermal infrared spectrum.The structure and manufacturing method of the film are introduced,and the fluid and temperature control system is established and tested to explore the thermal infrared characteristics of the film composed of different thermal units.The camouflage performance of the film is intuitively displayed through the temperature frequency histograms of the infrared images photographed by an infrared camera.The temperature control accuracy of the thermal infrared camouflage system and the dynamic camouflage response of the film are evaluated by the temperature distribution map of each pixel in infrared images and the salient degree values.Furthermore,the influential factors on the camouflage responding time are investigated,including the heating and cooling time of the liquid,the flow rate of pumps inside the driving module,and the energy loss along the liquid lines.An application of displaying false target is also introduced and tested.The results show that the camouflage film has a well camouflage effect and a wide adjustment temperature range,showing promise for a broad range of potential applications,such as counter-surveillance,thermal control and heat shielding.