Effects of Effluent from a Dumpsite on the Physicochemical Properties of River Achichum in Bamendakwe, Northwest Cameroon

This study was aimed to assess the effects of effluent from a dumpsite on the physicochemical properties of river Achichum in Bamendakwe in the Bamenda I municipality, Northwest Region of Cameroon. The quality of water used for domestic purposes by the population of this area is mostly appreciated through its organoleptic assessment while no attention is paid to the physicochemical and microbiological properties. Samples (upstream, effluent, and downstream) were collected in the months of September 2022 and February 2023 and examined for organoleptic, physicochemical and bacteriological characteristics using standard methods. The river was contaminated to different extents by nitrates (28.56 - 149.91 mg/L), sulphates (246.89 - 725.42 mg/L) and heavy metals (0.01 - 0.04 mg/L for lead and 0.98 - 2.15 mg/L for aluminum). This contamination could be due to an inflow of the untreated effluent into the river. The river contained a high pollution level of lead and aluminum. Bacteriological investigations revealed that all the analyzed samples from the river contained indicators of faecal pollution such as Enterobacteria spp., E. coli, Streptococcus spp., Salmonella spp., Shigella spp., Staphylococcus spp. and Vibrio spp. Consequently, its utilization exposes consumers to health risks. Thus, water from the river should be treated prior to consumption.

Kinetic, Isotherm and Thermodynamic Studies of the Adsorption of Thymol Blue onto Powdered Activated Carbons from <i>Garcinia cola Nut</i>Shells Impregnated with H₃PO₄and KOH: Non-Linear Regression Analysis

In this work, activated carbons (ACs) prepared by chemical activation of garcinia cola nut shell impregnated with H3PO4 (CBH2/1) and KOH (CBK1/1) were used to study the kinetics, equilibrium and thermodynamics of the adsorption of thymol blue from aqueous solution. The characterization of ACs showed the BET measurements gave surface area and total pore volume respectively of 328.407 m2·g-1 and 0.1032 cm3·g-1 for CBH2/1 and 25.962 m2·g-1 and 0.03 cm3·g-1for CBK1/1;elemental analysis showed a high percentage of carbon in both ACs. Influence of parameters such as initial pH, contact time, adsorbent mass, initial concentration, ionic strength and the effect of temperature on the removal of thymol blue from aqueous solution were studied in batch mode. The studies showed that equilibrium adsorption was attained after 60 minutes for the two ACs, adsorption capacity increased with increasing concentration of thymol blue, and maximum adsorption capacity was obtained at an acidic environment with pH 2. Avrami’s non-linear kinetic expression was the best suited for describing the adsorption kinetics of thymol blue onto ACs, while equilibrium data showed that the three-parameter isotherms better described the adsorption process since R2 > 0.96, and the error functions were lowest for all of them. Maximum adsorption capacity values obtained using the three-parameter Fritz-Schlunder equation were 32.147 mg·g-1 for CBH2/1 and 67.494 mg·g-1 for CBK1/1. The values of the model parameters g and mFS respectively, obtained using the Redlich-Peterson and Fritz-Schlunder III isotherms below 1, showed that the adsorption of thymol blue by the ACs occurred on heterogeneous surfaces. Thermodynamic analyses of the data of the adsorption of thymol blue onto ACs revealed that the adsorption process was temperature dependent, endothermic and spontaneous.