A Double-Phase High-Frequency Traveling Magnetic Field Developed for Contactless Stirring of Low-Conducting Liquid Materials

The use of low electrically conducting liquids is more and more widespread.This is the case for molten glass,salt or slag processing,ionic liquids used in biotechnology,batteries in energy storage and metallurgy.The present paper deals with the design of a new electromagnetic induction device that can heat and stir low electricallyconducting liquids.It consists of a resistance-capacity-inductance circuit coupled with a low-conducting liquid load.The device is supplied by a unique electric power source delivering a single-phase high frequency electric current.The main working principle of the circuit is based on a double oscillating circuit inductor connected to the solid-state transistor generator.This technique,which yields a set of coupled oscillating circuits,consists of coupling a forced phase and an induced phase,neglecting the influence of the electric parameters of the loading part(i.e.,the low-conductivity liquid).It is shown that such an inductor is capable to provide a two-phase AC traveling magnetic field at high frequency.To better understand the working principle,the present work improves a previous existing simplified theory by taking into account a complex electrical equivalent diagram due to the different mutual couplings between the two inductors and the two corresponding induced current sets.A more detailed theoretical model is provided,and the key and sensitive elements are elaborated.Based on this theory,equipment is designed to provide a stirring effect on sodium chloride-salted water at 40 S/m.It is shown that such a device fed by several hundred kiloHertz electric currents is able to mimic a linear motor.A set of optimized operating parameters are proposed to guide the experiment.A pure electromagnetic numerical model is presented.Numerical modelling of the load is performed in order to assess the efficiency of the stirrer with a salt water load.Such a device can generate a significant liquid motion with both controlled flow patterns and adjustable amplitude.Based on the magnetohydrodynamic theory,numerical modeling of the salt water flow generated by the stirrer confirms its feasibility.

Study of the Influence of Traveling Field Frequency and Wave Length on Pressure-Flow Rate Characteristic and Modeling of MHD Coupling in Annular Linear Induction Pump

The paper studies specific pumping characteristics of the annular linear pumps with travelling field(ALIP)for liquid sodium.This research represents a preliminary step in the study and development of very large electromagnetic pumps able to provide high flow rates.Since in such cases the magnetic Reynolds number are quite large,it is necessary to take into account the full magnetohydrodynamic interaction between the electromagnetic field and the liquid metal flow inside the pumping channel.The case where the velocity field is uniform in the channel cross section is firstly considered. Then,the coupling between the electromagnetic aspects with the hydrodynamic ones in a 2D axisyrnmetric fmite element model is studied,in order to compare the magnetic convection and the magnetic diffusion.

Innovative Solutions in Induction Heating for Better Energy Efficiency:Presentation of ISIS Project

The Energy Climate Package is the EU response to the Global Warming Challenge.Induction heating processes can contribute to the energy saving goal:20%saving within 2020.European induction manufacturer already propose many efficient solutions at industrial scale.To improve induction devices for an always better energy efficiency, EDF R&D set up a French cooperative project called ISIS with a financial support of the French National Research Agency.Its objective is to promote induction heating as Best Available Technology(BAT)and to develop innovative solutions to increase its efficiency.The ISIS innovations concern the electroheat conversion of induction devices(auto-adaptive multi-coil power supply,low losses coils)and the recovering of fatally lost energy.This paper shows the mid-term results of this project.Firsts control algorithms were successfully tested on a 100 kW 3-coil power supply.A homogenization technique is proposed to model a multi-strand coil.A heat recovery test bench is build and equipped with a PFC control loop to fit with the production fluctuations.