A new numerical simulation model for high pressure squeezing moulding

High pressure squeeze is the most popular moulding process applied in modern moulding machines.Because of the unique characters of moulding sand and nonlinearity of squeezing process,the mechanical model is of key importance for computer simulation.Drucker-Prager/Cap is a typical soil mechanical theory model and it was used to simulate the squeezing process in this study,while ABAQUS software is used to simulate dynamic stress/strain evolution during the process.The simulation agrees well with the experimental results.We conclude that Drucker-Prager/Cap is an appropriate model for the squeezing compaction of moulding sand,and that the associated nonlinearity can be solved well with ABAQUS software.

Experimental confirmation of physical metal penetration generation and press casting production considering molten metal's pressure control

This paper presents a technique for controlling the pressure of a molten metal when using a new type of iron casting method called sand mold press casting to realize high productivity and obtain high-quality products.The past test results using this method showed a casting yield of 90% to 95%,while conventional methods only show a casting yield of 60% to 70%.Although the press casting method does not require a sprue cup or runner channel casting defects such as metal penetration are often caused by the high pressure in the high-velocity pressing part of this casting process.Therefore,we proposed a pressure control method with a mathematical model of molten metal pressure,and with it we achieved experimental confirmation of the successful production of brake drums at different pressing temperatures.Results show that the proposed pressing control method can realize sound,penetration-free casting production.However,the theoretical analysis and design of this pressing process had not previously been studied sufficiently,and therefore this paper presents the theoretical design algorithm for the process as well as its experimental confirmation.

3D numerical simulation of high pressure squeezing process with revised Drucker-Prager/Cap model

In order to investigate the sand mold strength after the aeration sand filling-high pressure squeeze moldingprocess,a tree-dimentional(3D)numerical simulation was introduced.The commercial finite element method(FEM)software ABAQUScombined with a revised Drucker-Prager/Cap model was used to simulate the squeeze compaction process.Additionally,the sand bulk density after the aeration sand filling process was tested by a specially designed experiment,which divided the whole sand bulk in the molding chamber into5x9regions and it was used as the input to simulate the squeeze process.During the simulation process,the uniform modeling simulation and the patition modeling simulation methods were used a d the3D numercal simulation results were compared with correlative benchmark testings.From the3D numerica simulation results,it can be concluded that the uniform sand bulk density distribution can obtain a high quality sandmold and the revised Drncker-Pager/Cap model is suitable for handling the situation with the complex paaern.The3D numerical simulation results can predict well the sand mold strength distribution and can be used as guidelines for the production practice.

Modelling and Control of Pressurized Molten Metal in Press Casting

This paper presents a modeling and control of molten metal＇s pressure in pressing process using an innovative iron casting developed by our group. In this method, molten metal is directly poured into a lower mold, and then pressed to fill cavity by an upper mold being lowered down. For complex liquid flow during pressing, the liquid＇s pressure changing inside vertical path with various contraction and expansion geometries is newly modeled via the unstationary Bernoulli equation. The mathematical model is derived for a control design of pressing. To conduct the pressing velocity design algorithm, an unknown parameter of proposed model considering viscous flow is identified by using CFD （Computational Fluid Dynamics） with heat flow calculation. Control performance using a multi-switching velocity pattern is confirmed as an effective control design using the pressure model, because the pressure fluctuation has discontinuous variation points. Substituting detailed information for mold shape, poured volume and initial temperature into a developed control input generator, an optimum pressing velocity design and a robust design for defect-free production are proposed by the design algorithm based on the construction of an inverse system comprised of the sequential switching from higher to lower speed. Consequently, the effectiveness of the pressing control with reasonable pressure suppression has been demonstrated through CFD.