Distribution of Na+and Mechanical Properties of Hardened Body of Alkali-activated Cementitious Materials

To explore the distribution of and the mechanical properties(compressive strength)of the hardened body of alkali slag-fly ash cementitious materials,this study was conducted by using the XRD,FTIR,SEM/EDS,and other test methods in three conditions:airtight drying(AD),airtight immersion(AI),and airtight soaking(AS).The 1D distribution law of free of hardened body under standard curing conditions was explored.The experimental results show that under standard curing conditions,the 1D distribution of within 0d-3 d shows a∨-shaped distribution,within 3-7 d show a∧-shaped distribution,and within 7-28 d tends to be balanced.The test results of leaching rate show that the free was the most stable under AD conditions and the hardened body bound the most by XRD,FTIR and SEM/EDS.And the compressive strength of the hardened body was the highest.The compressive strength of 28th reached 95.9 MPa.The definite distribution of provides an important reference for the strength development and durability evaluation of the hardened body of alkaliexcited cementitious materials.

Beneficiation of low-grade diasporic bauxite with hydrocyclone

Low-grade diasporic bauxite was treated with hydrocyclone of small cone-angle.The effects of apex diameter,feed pressure and feed concentration on separation indexes were tested,and then the separation process was discussed by hydrokinetics tentatively.The results show that the increase of apex diameter changes the spacial locality of the envelope of zero vertical velocity, resulting in decrease of the ratio of Al2O3/SiO2 in overflow and increase of the recovery of Al2O3 in underflow,while feed pressure and feed concentration have no remarkable effect on the spacial locality of the envelope of zero vertical velocity,however,the separation indexes are improved by the increase of feed pressure,but are worsened by the increase of feed concentration.

Stability analysis of an unsaturated soil slope considering rainfall infiltration based on the Green-Ampt model

Based on the principle of saturated infiltration and the Green-Ampt model,an unsaturated infiltration model for a soil slope surface was established for either constant moisture content,or depth-varying moisture content and the slope.Infiltration parameters in the partially saturated slope were revealed under sustained rainfall.Through analysis of the variation of initial moisture content in the slope,the ponding time,infiltration depth,and infiltration rate were deduced for an unsaturated soil slope subject to rainfall infiltration.There is no ponded water on the surface of the slope under sustained low-intensity rainfall.The results show that the infiltration parameters of an unsaturated slope are influenced by the initial moisture content and the wetting front saturation,the soil cohesion and rainfall intensity under sustained rainfall.More short-term slope failures can occur with the decrease of cohesion of the soil of the slope.The ponding time and infiltration depth differ considering constant or different initial moisture content respectively in the soil slope.Then,best-fit curves of the infiltration rate,ponding time,and infiltration depth to the wetting front saturation were obtained with constant or different initial moisture contents.And the slope failure time is roughly uniform when subject to a rainfall intensity I>5 mm/h.