Research on the Collaborative Education Mechanism among In-School Mentors,Enterprise Mentors,and Counselors from the Perspective of Sanquan Education

This study addresses the issues existing in the current cultivation process of outstanding graduate students and explores the collaborative education mechanism among in-school mentors,enterprise mentors,and counselors in the cultivation of outstanding engineers in the mechanical field based on the perspective of Sanquan education(i.e.,holistic,full-course,and all-round education).Through exploring this mechanism,we attempt to construct a more scientific and efficient education model to enhance students’comprehensive quality and practical skills,thereby meeting society’s demand for high-quality talents in the mechanical field.

Comparison of School Building Construction Costs Estimation Methods Using Regression Analysis, Neural Network, and Support Vector Machine

Accurate cost estimation at the early stage of a construction project is key factor in a project’s success. But it is difficult to quickly and accurately estimate construction costs at the planning stage, when drawings, documentation and the like are still incomplete. As such, various techniques have been applied to accurately estimate construction costs at an early stage, when project information is limited. While the various techniques have their pros and cons, there has been little effort made to determine the best technique in terms of cost estimating performance. The objective of this research is to compare the accuracy of three estimating techniques (regression analysis (RA), neural network (NN), and support vector machine techniques (SVM)) by performing estimations of construction costs. By comparing the accuracy of these techniques using historical cost data, it was found that NN model showed more accurate estimation results than the RA and SVM models. Consequently, it is determined that NN model is most suitable for estimating the cost of school building projects.

Research on the Teaching Reform of Building Information Modeling Course Based on“Post,Course,Competition,and Certificate”Integration

With the rapid development of information technology,the utilization of building information modeling(BIM)is increasingly prevalent in the construction industry.In order to cultivate BIM application-oriented talents capable of effectively addressing industry development demands,this study proposes a reform plan for BIM courses that integrates post,course,competition,and certificate.The reform plan implements the teaching methods of post-course integration,competition-based teaching integration,and course certificate integration in the BIM course.It also carries out curriculum reform from four aspects:curriculum system,teaching mode,teaching content,and assessment method.Reform should be implemented to enhance students’professional and practical skills,thereby enabling them to secure improved employment opportunities and prospects for career development.

Practice and Exploration of Ideological and Political Education for Postgraduate Students Under the Mentor Responsibility System

This study aims to address the problems existing in the ideological and political education of postgraduate students,and combines the implementation of the mentor responsibility system to explore the role orientation,work content,and practical effects of mentors in the ideological and political education of postgraduate students.Through questionnaire surveys,interviews,and other research methods,the current situation of ideological and political education of postgraduate students under the mentor responsibility system is analyzed,and corresponding optimization strategies are proposed.

Perception and Uses of Stakeholders＇ Power on Health and Safety Risk Management in Construction Projects in Tanzania

Key project stakeholders such as clients, consultant teams, contractors and workers have different sources of power to implement projects. How these powers influence health and safety risk management is not well documented. This article therefore assesses the perception and uses of stakeholders＇ power on health and safety in risk management in construction projects in Tanzania, specifically focuses on sources and types of power, how stakeholders perceive their power, how they use power on health and safety risk management, and what factors hinders their use of power. A case study strategy was adopted and four large on-going construction projects in Dar es Salaam Tanzania were involved. Data was collected through in-depth interviews with clients, consultants, contractors and construction workers. Findings indicate that stakeholders have different sources of power such as technical expertise, legitimate, political position, resources information to influence health and safety risk management. Nonetheless, the use of these powers was generally limited due to low level of knowledge on health and safety risk management among stakeholders, wrong perception on their roles, insufficient health and safety regulations and weak procurement system. The research recommends that, in order to realize health and safety performance through using stakeholder＇s power, there is a need of clear definition of stakeholders＇ role and responsibilities on health and safety, wide knowledge and experiences on health and safety risk management, strong regulatory system and procurement system.

Workability and Strength of Ceramsite Self-Compacting Concrete with Steel Slag Sand

This study focuses on the workability and compressive strength of ceramsite self-compacting concrete with fine aggregate partially substituted by steel slag sand(CSLSCC)to prevent the pollution of steel slag in the environment.The SF,J-ring,visual stability index,and sieve analysis tests are primarily employed in this research to investigate the workability of freshly mixed self-compacting concrete containing steel slag at various steel slag sand replacement rates.The experiment results indicate that CSLSCC with the 20%volume percentage of steel slag(VPS)performs better workability,higher strength,and higher specific strength.The 7-day compressive strength of CSLSCC with the 0.4 of the water-binder ratio(W/B),decreases with the increase of steel slag content,while the 28-day compressive strength increases significantly.The ceramsite self-compacting concrete with good comprehensive performance can be obtained when the substitution rate of steel slag sand for fine aggregate is less than 20%(volume percentage).

Simulation Evaluation of Outdoor Noise Environment in Buildings

Green campus design has become an essential strategy to enhance campus life and learning.However,noise pol-lution remains a troubling aspect that impacts teaching and learning processes,even causing harm to the health of students and teachers.Therefore,acoustic environment quality design is crucial.This article focuses on the expansion project of a school campus in Shenzhen.We simulated and analyzed the outdoor noise environment separately for the proposed teach-ing building,as well as the existing buildings like the dining hall,teaching building,and laboratory building.The results showed that the proposed teaching building was mainly affected by surrounding noise,with the worst outdoor noise being in classrooms adjacent to the teaching building in the south and the basketball court at the west of the classroom,with maximum noise values reaching 73 dB and 66 dB,respectively.In the future,these rooms should be renovated to achieve an excellent indoor soundproof environment.

Analysis of the Architectural Design Talent Development Direction by Investigating the Employment Status of Architectural Design Graduates

Based on a comprehensive investigation of the employment status of architectural design graduates at a certain university,this paper analyzes the correctness of the talent development direction of architectural design in hopes of pro-viding a valuable reference for further teaching reform and strengthening school-enterprise collaboration.The research re-sults show that architectural design is the main choice of graduates,accounting for as high as 63%,and traditional architec-tural design skills continue to be in demand in the market.Employment in fields such as interior design,BIM design,and green architecture is also included.The distribution of job positions for graduates is mainly in the areas of scheme design assistants and construction drawing design,requiring software operation,communication,scheme design,and construction drawing skills.This paper also proposes talent development measures such as optimizing the curriculum,strengthening faculty construction,and deepening school-enterprise collaboration,in order to improve the quality of talent development and the competitiveness of graduates.

Assessment and Optimization Strategies of Campus Sound Environment

A good sound environment is essential in creating a harmonious and peaceful campus,improving students’learning outcomes,promoting physical and mental health,and creating a green and healthy campus.This study investigated the impact of new buildings on existing ones by optimizing the spacing between new buildings and the sound insulation structure of building enclosures.The results indicated that building 4 was affected by the noise from new building 1 and its surroundings,with a maximum outdoor daytime noise level reaching 69 dB,and the indoor background noise level in the least favorable classroom was 43.73 dB,less than 45 dB,which was within the acceptable range.It is recommended that the sound insulation design be improved in the planning of new teaching buildings.Besides,the surrounding traffic conditions should be improved,and the usage time of sports facilities should be scheduled appropriately to prevent the noise from sporting activities from affecting the classroom activities.The findings of this study provide valuable references for future architectural acoustics design and campus planning,contributing to the creation of peaceful and comfortable campus environments.

MEMS Huygens Clock Based on Synchronized Micromechanical Resonators

With the continuous miniaturization of electronic devices,microelectromechanical system(MEMS)oscillators that can be combined with integrated circuits have attracted increasing attention.This study reports a MEMS Huygens clock based on the synchronization principle,comprising two synchronized MEMS oscillators and a frequency compensation system.The MEMS Huygens clock improved shorttime stability,improving the Allan deviation by a factor of 3.73 from 19.3 to 5.17 ppb at 1 s.A frequency compensation system based on the MEMS oscillator’s temperature-frequency characteristics was developed to compensate for the frequency shift of the MEMS Huygens clock by controlling the resonator current.This effectively improved the long-term stability of the oscillator,with the Allan deviation improving by 1.6343105 times to 30.9 ppt at 6000 s.The power consumption for compensating both oscillators simultaneously is only 2.85 mW·℃^(-1).Our comprehensive solution scheme provides a novel and precise engineering solution for achieving high-precision MEMS oscillators and extends synchronization applications in MEMS.

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.

Design of a Biomimetic Skin for an Octopus-Inspired Robot - Part I： Characterising Octopus Skin

Octopus skin samples were tested under quasi-static and scissor cutting conditions to measure the in-plane material prop- erties and fracture toughness. Samples from all eight arms of one octopus were tested statically to investigate how properties vary from arm to arm. Another nine octopus skins were measured to study the influence of body mass on skin properties. In- fluence of specimen location on skin mechanical properties was also studied. Material properties of skin, i.e. the Young＇s modulus, ultimate stress, failure strain and fracture toughness have been plotted against the position of skin along the length of arm or body. Statistical studies were carried out to help analyzing experimental data obtained. Results of this work will be used as guidelines for the design and development of artificial skins for an octopus-inspired robot.

The Working Mechanism and An Analytic Method of the Deep Embedded Large Cylinder Structure

The large cylinder is a new-type structure that has been applied to harbor and offshore engineering. An analytic method of the relationship between loads and the structure displacement is developed based on the failure mode of deep embedded large cylinder structures. It can be used to calculate directly the soil resistance and the ultimate bearing capacity of the structure under usage. A new criterion of the large cylinder structure, which discriminates the deep embedded cylinder from the shallow embedded cylinder, is defined. Model tests prove that the proposed method is feasible for the analysis of deep embedded large cylinder structures.

Design of a Biomimetic Skin for an Octopus-Inspired Robot - Part Ⅱ： Development of the Skin Artefact

In order to develop skin artefact for an octopus-inspired robot arm, which is designed to be able to elongate 60% of its original length, silicone nlbber and knitted nylon sheet were selected to manufacture an artificial skin, due to their higher elastic strain and high flexibility. Tensile and scissors cutting tests were conducted to characterise the matrix and reinforcing materials and the skin artefact. Material properties of the individual and the composite materials were compared with the measured properties of real octopus skin presented ill Part I. The Young＇s modulus of the skin should be below 20 MPa and the elastic strain range should be over 60%. The fracture toughness should be at least 0.9 kJ.m 2. Tubes made of the skin artefact filled with liquid were tested to study volume change under deformation. Finite element analysis model was developed to simulate the material and arm structure under tensile loading. Results show that the skin artefact developed has similar mechanical properties as the real octopus skin and satisfies all the design specifications of the OCTOPUS robot.

Hydration process of rice husk ash cement paste and its corrosion resistance of embedded steel bar

Thermogravimetric analysis and electrical resistivity were used to determine the hydration process of cement paste with rice husk ash(RHA)(0−15%)and water-cement ratio of 0.4 in this work.X-ray diffraction(XRD)method and scanning electron microscopy(SEM)were used to survey crystal composition and microstructures of specimens cured for 3 h,1 d,7 d and 28 d.Finally,electrical parameters(electrical resistance and AC impedance spectroscopy)of steel bars reinforced cement paste were investigated to study the effect of RHA on the corrosion resistance.Results showed that RHA could affect the cement hydration by hydration promotion and pozzolanic effect.The evaluation function for electrical resistivity and curing ages fitted well with linear increasing function.The addition of RHA higher than 5%demonstrated a decreasing role in the electrical resistivity of cement paste at earlier curing ages(3−7 d).Meanwhile,when at later curing ages(7−28 d)the result was the opposite.Moreover,RHA demonstrated positive effects on corrosion resistance of steel bars in cement paste.

Two-dimensional PSD based automatic docking of self-reconfiguration modular exploration robot system

Based on the design of a docking mechanism,this paper thoroughly investigates the space automatic doc- king of self-reconfiguration modular exploration robot system(RMERS).The method that leads robot to achieve space docking by using two-dimensional PSD is put forward innovatively for the median size robot system.At the same time,in order to enlarge the detecting extension and the precision of PSD and reduce its dependence on light- ing signal,the PSD was remade by increasing the optical device over its light-sensitive surface.The emission board and LED light scheduling were designed according to docking arithmetic,and the operating principle of docking process was analyzed based on these.The simulation experiments were carried out and their results are presented.

Improving the Unconfined Compressive Strength of Red Clay by Combining Biopolymers with Fibers

To explore an environmentally friendly improvement measure for red clay,the function and mechanism of xanthan gum biopolymer and polypropylene fibers on the strength properties of red clay were investigated by unconfined compressive strength and scanning electron microscopy tests.The test results demonstrated that the contents and curing ages of xanthan gum had significant influences on the unconfined compressive strength of red clay.Compared with untreated soil,1.5%xanthan gum content was the optimal ratio in which the strength increment was between 41.52 kPa and 64.73 kPa.On the other hand,the strength of xanthan gum-treated red clay increased,whereas the ductility decreased with the increase in curing ages,indicating that the xanthan gum-treated red clay started to gradually consolidate after 3 days of curing and stiffness significantly improved between 7 and 28 days of curing.The results also showed that the synergistic consolidation effects of the xanthan gum–polypropylene fibers could not only effectively enhance the strength of red clay but also reduce the brittle failure phenomenon.The strengths of soil treated with 2.0%xanthan gum-polypropylene fibers were 1.9–2.41 and 1.12–1.47 times than that of red clay and 1.5%xanthan gum-treated clay,respectively.The results of study provide the related methods and experiences for the field of ecological soil treatment.

A graphic monitoring method for electric power of VVVF hydraulic system

In order to online monitor the running state of variable voltage and variable frequency(VVVF)hydraulic system,this paper presents a graphic monitoring method that fuses the information of variable frequency electric parameters.This paper first analyzes how the voltage and current of the motor stator change with the operation conditions of VVVF hydraulic system.As a result,we draw the relationship between the electric parameters(voltage and current)and power frequency.Then,the signals of the voltage and current are fused as dynamic figures based on the idea of Lissajous figures,and the values of the electric parameters are related to the features of the dynamic figures.Rigorous theoretical analysis establishes the function between the electric power of the variable frequency motor(VFM)and the features of the plotted dynamic figures including area of diagram,area of bounding rectangle,tilt angle,etc.Finally,the effectiveness of the proposed method is verified by two cases,in which the speed of VFM and the load of VVVF hydraulic system are changed.The results show that the increase of the speed of VFM enhances its three-phase electric power,but reduces the tilt angle of the plotted dynamic figures.In addition,as the load of VVVF hydraulic system is increased,the three-phase electric power of VFM and the tilt angle of the plotted dynamic figures are both increased.This paper provides a new way to online monitor the running state of VVVF hydraulic system.

Impact of indoor thermal comfort on physiological parameters of human body

With the living standards gradually improved,the buildings with safe,comfortable,healthy indoor thermal environment would be the ideal pursuit. But to create the preferable indoor thermal environment,it is necessary to research physiological influence of indoor thermal environment on human body. So a typical region of hot-humid climate in Chongqing,China,was considered as the object to study physiological indexes of human body. And the indoor thermal environment parameters and physiological indexes of human body were the main measurements. 20 volunteer students were organized to take part in the experiments in the laboratory during this summer. And two methods,physical measuring and questionnaire investigation,were used in the experiments. The results show that the increase in indoor air temperature reduces the uncomfortable feeling of air draft. Indoor air temperature has visible effects on MCS (motor nerve conduction speed),SCS (sensory nerve conduction speed),HR (heart rate),the ECG (electrocardiogram)-QT segment and SSEP (short somatosensory evoked potential)-latent period of N9. Therefore,a safe,comfortable and healthful indoor environment can be created by considering these factors.

Optimization Mathematical Model of Pile Forces for Offshore Piled Breasting Dolphins

An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%～20% and the piles' bearing state is improved greatly.