Monitoring shear deformation of sliding zones is of great significance for understanding the landslide evolution mechanism,in which fiber optic strain sensing has shown great potential.However,the cor-relation between...Monitoring shear deformation of sliding zones is of great significance for understanding the landslide evolution mechanism,in which fiber optic strain sensing has shown great potential.However,the cor-relation between strain measurements of quasi-distributed fiber Bragg grating(FBG)sensing arrays and shear displacements of surrounding soil remains elusive.In this study,a direct shear model test was conducted to simulate the shear deformation of sliding zones,in which the soil internal deformation was captured using FBG strain sensors and the soil surface deformation was measured by particle image velocimetry(PIV).The test results show that there were two main slip surfaces and two secondary ones,developing a spindle-shaped shear band in the soil.The formation of the shear band was successfully captured by FBG sensors.A sinusoidal model was proposed to describe the fiber optic cable deformation behavior.On this basis,the shear displacements and shear band widths were calculated by using strain measurements.This work provides important insight into the deduction of soil shear deformation using soil-embedded FBG strain sensors.展开更多
Anti-slide piles are one of the most important reinforcement structures against landslides,and evalu-ating the working conditions is of great significance for landslide mitigation.The widely adopted analytical methods...Anti-slide piles are one of the most important reinforcement structures against landslides,and evalu-ating the working conditions is of great significance for landslide mitigation.The widely adopted analytical methods of pile internal forces include cantilever beam method and elastic foundation beam method.However,due to many assumptions involved in calculation,the analytical models cannot be fully applicable to complex site situations,e.g.landslides with multi-sliding surfaces and pile-soil interface separation as discussed herein.In view of this,the combination of distributed fiber optic sensing(DFOS)and strain-internal force conversion methods was proposed to evaluate the working conditions of an anti-sliding pile in a typical retrogressive landslide in the Three Gorges reservoir area,China.Brillouin optical time domain reflectometry(BOTDR)was utilized to monitor the strain distri-bution along the pile.Next,by analyzing the relative deformation between the pile and its adjacent inclinometer,the pile-soil interface separation was profiled.Finally,the internal forces of the anti-slide pile were derived based on the strain-internal force conversion method.According to the ratio of calculated internal forces to the design values,the working conditions of the anti-slide pile could be evaluated.The results demonstrated that the proposed method could reveal the deformation pattern of the anti-slide pile system,and can quantitatively evaluate its working conditions.展开更多
Thermo-poro-mechanical responses along sliding zone/surface have been extensively studied.However,it has not been recognized that the potential contribution of other crucial engineering geological interfaces beyond th...Thermo-poro-mechanical responses along sliding zone/surface have been extensively studied.However,it has not been recognized that the potential contribution of other crucial engineering geological interfaces beyond the slip surface to progressive failure.Here,we aim to investigate the subsurface multiphysics of reservoir landslides under two extreme hydrologic conditions(i.e.wet and dry),particularly within sliding masses.Based on ultra-weak fiber Bragg grating(UWFBG)technology,we employ specialpurpose fiber optic sensing cables that can be implanted into boreholes as“nerves of the Earth”to collect data on soil temperature,water content,pore water pressure,and strain.The Xinpu landslide in the middle reach of the Three Gorges Reservoir Area in China was selected as a case study to establish a paradigm for in situ thermo-hydro-poro-mechanical monitoring.These UWFBG-based sensing cables were vertically buried in a 31 m-deep borehole at the foot of the landslide,with a resolution of 1 m except for the pressure sensor.We reported field measurements covering the period 2021 and 2022 and produced the spatiotemporal profiles throughout the borehole.Results show that wet years are more likely to motivate landslide motions than dry years.The annual thermally active layer of the landslide has a critical depth of roughly 9 m and might move downward in warmer years.The dynamic groundwater table is located at depths of 9e15 m,where the peaked strain undergoes a periodical response of leap and withdrawal to annual hydrometeorological cycles.These interface behaviors may support the interpretation of the contribution of reservoir regulation to slope stability,allowing us to correlate them to local damage events and potential global destabilization.This paper also offers a natural framework for interpreting thermo-hydro-poro-mechanical signatures from creeping reservoir bank slopes,which may form the basis for a landslide monitoring and early warning system.展开更多
Understanding the paleoenvironment and phytogeographical history of the Tibetan Plateau,China relies on discovering new plant fossils.The Qaidam Basin has long been regarded as an ideal‘field laboratory’to investiga...Understanding the paleoenvironment and phytogeographical history of the Tibetan Plateau,China relies on discovering new plant fossils.The Qaidam Basin has long been regarded as an ideal‘field laboratory’to investigate the paleoclimate and paleobiological evolution of the northern Tibetan Plateau.However,fossil angiosperms from the Qaidam Basin are rare,and our knowledge of its paleovegetation is poor.Here,we report fossil leaves and fruits of Betulaceae found from the Oligocene Shangganchaigou Formation of northwestern Qaidam Basin(Huatugou area).Comparative morphological analysis led us to assign the fruits to the Betula subgenus Betula and the leaves to Carpinus grandis.These findings,together with other reported fossil plants from the same locality,reveal a close floristic linkage between the Qaidam Basin and Europe during the Oligocene.The northern pathway of this floristic exchange may have crossed through the Qaidam Basin during the late Paleogene.This floristic linkage may have been facilitated by the continuous narrowing of the Turgai Strait and stronger westerlies,which transported moisture and provided favorable climatic conditions.Indeed,fossil plants collected from the Qaidam Basin suggest that during the Oligocene this region had warm and humid deciduous broad-leaf forest,which differs from the region’s modern vegetation and indicates that the Qaidam Basin may have been a suitable region for these plants to flourish and spread during the Oligocene.展开更多
When the geological environment of rock masses is disturbed,numerous non-persisting open joints can appear within it.It is crucial to investigate the effect of open joints on the mechanical properties of rock mass.How...When the geological environment of rock masses is disturbed,numerous non-persisting open joints can appear within it.It is crucial to investigate the effect of open joints on the mechanical properties of rock mass.However,it has been challenging to generate realistic open joints in traditional experimental tests and numerical simulations.This paper presents a novel solution to solve the problem.By utilizing the stochastic distribution of joints and an enhanced-fractal interpolation system(IFS)method,rough curves with any orientation can be generated.The Douglas-Peucker algorithm is then applied to simplify these curves by removing unnecessary points while preserving their fundamental shape.Subsequently,open joints are created by connecting points that move to both sides of rough curves based on the aperture distribution.Mesh modeling is performed to construct the final mesh model.Finally,the RB-DEM method is applied to transform the mesh model into a discrete element model containing geometric information about these open joints.Furthermore,this study explores the impacts of rough open joint orientation,aperture,and number on rock fracture mechanics.This method provides a realistic and effective approach for modeling and simulating these non-persisting open joints.展开更多
Biochar is a carbon sink material with the potential to improve water retention in various soils.However,for the long‐term maintenance of green infrastructure,there is an additional need to regulate the water content...Biochar is a carbon sink material with the potential to improve water retention in various soils.However,for the long‐term maintenance of green infrastructure,there is an additional need to regulate the water contents in the covers to maintain vegetation growth in semiarid conditions.In this study,biochar‐amended soil was combined with subsurface drip irrigation,and the water preservation characteristics of this treatment were investigated through a series of one‐dimensional soil column tests.To ascertain the best treatment method specific to semiarid climatic conditions,the test soil was amended with 0%,1%,3%,and 5%biochar.Automatic irrigation devices equipped with soil moisture sensors were used to control the subsurface water content with the aim of enhancing vegetation growth.Each soil column test lasted 150 h,during which the volumetric water contents and soil suction data were recorded.The experimental results reveal that the soil specimen amended with 3%biochar is the most water‐saving regardless of the time cost.Soil with a higher biochar content(e.g.,5%)consumes a more significant amount of water due to the enhancement of the water‐holding capacity.Based on the experimental results,it can be concluded that the appropriate ratio can be determined within 1%–3%,which can reduce not only the amount of irrigated/used water but also the time cost.Such technology can be explored for water content regulation in green infrastructure and the development of barriers for protecting the environment around deep underground waste containment.展开更多
Underground Thermal Energy Storage(UTES)store unstable and non-continuous energy underground,releasing stable heat energy on demand.This effectively improve energy utilization and optimize energy allocation.As UTES te...Underground Thermal Energy Storage(UTES)store unstable and non-continuous energy underground,releasing stable heat energy on demand.This effectively improve energy utilization and optimize energy allocation.As UTES technology advances,accommodating greater depth,higher temperature and multi-energy complementarity,new research challenges emerge.This paper comprehensively provides a systematic summary of the current research status of UTES.It categorized different types of UTES systems,analyzes the applicability of key technologies of UTES,and evaluate their economic and environmental benefits.Moreover,this paper identifies existing issues with UTES,such as injection blockage,wellbore scaling and corrosion,seepage and heat transfer in cracks,etc.It suggests deepening the research on blockage formation mechanism and plugging prevention technology,improving the study of anticorrosive materials and water treatment technology,and enhancing the investigation of reservoir fracture network characterization technology and seepage heat transfer.These recommendations serve as valuable references for promoting the high-quality development of UTES.展开更多
In order to clarify the reservoir characteristics and main controlling factors of the flow three section of the K oil field in the Weixinan Depression, a study on the reservoir characteristics and main controlling fac...In order to clarify the reservoir characteristics and main controlling factors of the flow three section of the K oil field in the Weixinan Depression, a study on the reservoir characteristics and main controlling factors of the flow three section of the K oil field in the Weixinan Depression has been carried out by utilizing the data of cores, casting thin sections, physical property tests and logging wells. The results show that the lithology of the reservoir in the flow three section of the study area is dominated by coarse sandstone and medium sandstone, followed by conglomerate-bearing sandstone and sand conglomerate. The porosity is mainly distributed in the range of medium-high porosity, and the permeability is mainly medium seepage, and the overall physical properties are good. The three sections of the stream in the study area mainly include four sedimentary microphases, namely, underwater diversion channel, estuarine dam, mat sand and inter-diversion bay. The underwater diversion channel has the best physical properties, characterized by coarse grains and low mud content. The medium and coarse sand content of various lithologic reservoirs is the main factor in the formation of high-quality reservoirs. Rock-forming action is an important factor affecting the physical properties of local reservoirs, comparing the compaction, cementation and dissolution between different sedimentary microphases, the underwater diverging river has the lowest rate of compaction and pore reduction, the highest rate of pore increase by dissolution, and the best physical properties. Therefore, the weakly cemented-strongly dissolved coarse sandstone phase developed in the microphase of the underwater diversion channel in section 3 of the flow in the study area is the most favorable reservoir.展开更多
Dissolution mechanism and favorable reservoir distribution prediction are the key problems restricting oil and gas exploration in deep-buried layers.In this paper,the Enping Formation and Zhuhai Formation in Baiyun Sa...Dissolution mechanism and favorable reservoir distribution prediction are the key problems restricting oil and gas exploration in deep-buried layers.In this paper,the Enping Formation and Zhuhai Formation in Baiyun Sag of South China Sea was taken as a target.Based on the thin section,scanning electron microscopy,X-ray diffraction,porosity/permeability measurement,and mercury injection,influencing factors of dissolution were examined,and a dissolution model was established.Further,high-quality reservoirs were predicted temporally and spatially.The results show that dissolved pores constituted the main space of the Paleogene sandstone reservoir.Dissolution primarily occurred in the coarse-and medium-grained sandstones in the subaerial and subaqueous distributary channels,while dissolution was limited in fine-grained sandstones and inequigranular sandstones.The main dissolved minerals were feldspar,tuffaceous matrix,and diagenetic cement.Kaolinization of feldspar and illitization of kaolinite are the main dissolution pathways,but they occur at various depths and temperatures with different geothermal gradients.Dissolution is controlled by four factors,in terms of depositional facies,source rock evolution,overpressure,and fault activities,which co-acted at the period of 23.8–13.8 Ma,and resulted into strong dissolution.Additionally,based on these factors,high-quality reservoirs of the Enping and Zhuhai formations are predicted in the northern slope,southwestern step zone,and Liuhua uplift in the Baiyun Sag.展开更多
Total Electron Content(TEC)and electron density enhancement were observed on the day before 17 March 2015 great storm in the China Region.Observations from ground-and space-based instruments are used to investigate th...Total Electron Content(TEC)and electron density enhancement were observed on the day before 17 March 2015 great storm in the China Region.Observations from ground-and space-based instruments are used to investigate the temporal and spatial evolution of the pre-storm enhancement.TEC enhancement was observed from 24°N to 30°N after 10:00 UT at 105°E,110°E and 115°E longitudes on March 16.The maximum magnitude of TEC enhancement was more than 10 TECU and the maximal relative TEC enhancement exceeded 30%.Compared with geomagnetic quiet days,the electron density of Equatorial Ionization Anomaly(EIA)northern peak from Swarm A/C satellites on March 16 was larger and at higher latitudes.NmF2 enhanced during 11:30—21:00 UT at Shaoyang Station and increased by 200%at~16:00 UT.However,TEC and electron density enhancement were not accompanied by a significant change of hmF2.Most research has excluded some potential mechanisms as the main driving factors for storm-time density enhancements by establishing observational constraints.In this paper,we observed pre-storm enhancement in electron density at different altitudes and Equatorial Electrojet(EEJ)strength results derived from ground magnetometers observations suggest an enhanced eastward electric field from the E region probably played a significant role in this event.展开更多
Jinshan gold deposit is located in northeastern Jiangxi,South China,which is related to the ductile shear zone.It has a gold reserve of more than 200 tons,with 80%of gold occurring in pyrite. The LREE of gold-bearing ...Jinshan gold deposit is located in northeastern Jiangxi,South China,which is related to the ductile shear zone.It has a gold reserve of more than 200 tons,with 80%of gold occurring in pyrite. The LREE of gold-bearing pyrite is as higher as 171.664 ppm on average,with relatively higher light rare earth elements(LREE;159.556 ppm) and lower HREE(12.108 ppm).TheΣLREE/ΣHREE ratio is 12.612 and(La/Yb)_N is 11.765.These indicate that pyrite is rich in LREE.The(La/Sm)_N ratio is 3.758 and that of(Gd/Yb)_N is 1.695.These are obvious LREE fractionations.The rare earth element(REE) distribution patterns show obvious Eu anomaly with averageδEu values of 0.664,andδCe anomalies of 1.044.REE characteristics are similar to those of wall rocks(regional metamorphic rocks),but different from those of the Dexing granodiorite porphyry and Damaoshan biotite granite.These features indicate that the ore-forming materials in the Jinshan gold deposit derived from the wall rocks, and the ore-forming fluids derived from metamorphic water.The Co/Ni ratio(average value 0.38) of pyrite suggests that the Jinshan gold deposit formed under a medium-low temperature.It is inferred from the values of high-field strength elements,LREE,Hf/Sm,Nb/La,and Th/La of the pyrite that the ore-forming fluids of the Jinshan gold deposit derived from metamorphic water with Cl〉F.展开更多
We present a 3D model of shear velocity of crust and upper mantle in China and surrounding regions from surface wave tomography. We combine dispersion measurements from ambient noise correlation and traditional earthq...We present a 3D model of shear velocity of crust and upper mantle in China and surrounding regions from surface wave tomography. We combine dispersion measurements from ambient noise correlation and traditional earthquake data. The stations include the China National Seismic Network, global networks, and all the available PASSCAL stations in the region over the years. The combined data sets provide excellent data coverage of the region for surface wave measurements from 8 to 120 s, which are used to invert for 3D shear wave velocity structure of the crust and upper mantle down to about 150 kin. We also derive new models of the study region for crustal thickness and averaged S velocities for upper, mid, and lower crust and the uppermost mantle. The models provide a fundamental data set for understanding continental dynamics and evolution. The tomography results reveal significant features of crust and upper mantle structure, including major basins, Moho depth variation, mantle velocity contrast between eastern and western North China Craton, widespread low-velocity zone in mid- crust in much of the Tibetan Plateau, and clear velocity contrasts of the mantle lithosphere between north and southern Tibet with significant E-W variations. The low velocity structure in the upper mantle under north and eastern TP correlates with surface geological boundaries. A patch of high velocity anomaly is found under the eastern part of the TP, which may indicate intact mantle lithosphere. Mantle lithosphere change from the western to The Tanlu Fault appears boundary. shows striking systematic eastern North China Craton. to be a major lithosphere展开更多
The rare earth elements(REE) composition of the polymetallic crusts and nodules obtained from the South China Sea(SCS) were analyzed through inductively coupled plasma mass spectrometry.Results revealed great diff...The rare earth elements(REE) composition of the polymetallic crusts and nodules obtained from the South China Sea(SCS) were analyzed through inductively coupled plasma mass spectrometry.Results revealed great differences in the REE abundances(∑REE) of the SCS polymetallic crusts and nodules; the crusts show the highest ∑REE, whereas the nodules exhibit the lowest ∑REE. The similarity in their NASC-normalized patterns, the enriched light REE(LREE), the markedly positive Ce anomaly(δCe), and the non-or weakly positive Eu anomaly(δEu), suggest that the polymetallic crusts and nodules are of hydrogenetic origin. Moreover, the REE contents and their relevant parameters are quite different among the various layers of the crusts and nodules, which probably results from the different marginal sea environments and mineral assemblages of the samples. The growth profiles of the SCS polymetallic crusts and nodules reveal the tendency ∑REE and δCe to slightly increase from the outer to the inner layers, suggesting that the growth environments of these samples changed smoothly from an oxidizing to a relatively reducing environment; in addition, the crust ST1 may have experienced a regressive event(sea-level change) during its growth, although the REE composition of the seawater remained relatively stable. On the basis of the regional ∑REE distribution in the SCS crusts and nodules,the samples collected near the northern margin were influenced by terrigenous material more strongly compared with the other samples, and the REE contents are relatively low. Therefore, the special geotectonic environment is a significant factor influencing the abundance of elements, including REE and other trace elements. Compared with the oceanic seamount crusts and deep-sea nodules from other oceans,the SCS polymetallic crusts and nodules exhibit special REE compositions and shale-normalized patterns, implying that the samples are of marginal sea-type Fe-Mn sedimentary deposits, which are strongly affected by the epicontinental environment, and that they grew in a more oxidative seawater environment. This analysis indicates that the oxidized seawater environment and the special nano property of their Fe-Mn minerals enrich the REE adsorption.展开更多
Under the new development philosophy of carbon peaking and carbon neutrality,CO_(2)and O_(2)in situ leaching(ISL)has been identified as a promising technique for uranium mining in China,not only because it solves carb...Under the new development philosophy of carbon peaking and carbon neutrality,CO_(2)and O_(2)in situ leaching(ISL)has been identified as a promising technique for uranium mining in China,not only because it solves carbon dioxide utilization and sequestration,but it also alleviates the environmental burden.However,significant challenges exist in assessment of CO_(2)footprint and water-rock interactions,due to complex geochemical processes.Herein this study conducts a three-dimensional,multicomponent reactive transport model(RTM)of a field-scale CO_(2)and O_(2)ISL process at a typical sandstone-hosted uranium deposit in Songliao Basin,China.Numerical simulations are performed to provide new insight into quantitative interpretation of the greenhouse gas(CO_(2))footprint and environmental impact(SO_(4)^(2–))of the CO_(2)and O_(2)ISL,considering the potential chemical reaction network for uranium recovery at the field scale.RTM results demonstrate that the fate of the CO_(2)could be summarized as injected CO_(2)dissolution,dissolved CO_(2)mineralization and storage of CO_(2)as a gas phase during the CO_(2)and O_(2)ISL process.Furthermore,compared to acid ISL,CO_(2)and O_(2)ISL has a potentially smaller environmental footprint,with 20%of SO_(4)^(2–)concentration in the aquifer.The findings improve our fundamental understanding of carbon utilization in a long-term CO_(2)and O_(2)ISL system and provide important environmental implications when considering complex geochemical processes.展开更多
Defects in cast-in-situ piles have an adverse impact on load transfer at the pile‒soil interface and pile bearing capacity. In recent years, thermal integrity profiling (TIP) has been developed to measure temperature ...Defects in cast-in-situ piles have an adverse impact on load transfer at the pile‒soil interface and pile bearing capacity. In recent years, thermal integrity profiling (TIP) has been developed to measure temperature profiles of cast-in-situ piles, enabling the detection of structural defects or anomalies at the early stage of construction. However, using this integrity testing method to evaluate potential defects in cast-in-situ piles requires a comprehensive understanding of the mechanism of hydration heat transfer from piles to surrounding soils. In this study, small-scale model tests were conducted in laboratory to investigate the performance of TIP in detecting pile integrity. Fiber-optic distributed temperature sensing (DTS) technology was used to monitor detailed temperature variations along model piles in sand. Additionally, sensors were installed in sand to measure water content and matric suction. An interpretation method against available DTS-based thermal profiles was proposed to reveal the potential defective regions. It shows that the temperature difference between normal and defective piles is more obvious in wet sand. In addition, there is a critical zone of water migration in sand due to the water absorption behavior of cement and temperature transfer-induced water migration in the early-age concrete setting. These findings could provide important insight into the improvement of the TIP testing method for field applications.展开更多
For long-distance water conveyance shield tunnels in operation,the high internal water pressure may cause excessive deformation of composite linings,affecting their structural integrity and serviceability.However,the ...For long-distance water conveyance shield tunnels in operation,the high internal water pressure may cause excessive deformation of composite linings,affecting their structural integrity and serviceability.However,the deformation and failure characteristics of lining structures under internal water pressure are not well investigated in the literature,particularly for three-layer composite linings.This study presents an in situ experimental investigation on the response of two types of composite linings(i.e.separated and combined lining structures)subjected to internal pressures,in which a fiber optic nerve system(FONS)equipped with distributed strain and displacement sensing nerves was employed to monitor the performance of the two composite linings during testing.The experimental results clearly show that the damage of the tunnel lining under different internal pressures was mainly located in the self-compaction concrete layer.The separated lining structure responded more aggressively to the variations in internal pressures than the combined one.Moreover,two evaluation indices,i.e.radial displacement and effective stiffness coefficient,are proposed for describing the changes in the structural bearing performance.The effective stiffness coefficients of the two types of lining structures were reduced by 39.4%and 29.5%,respectively.Considering the convenience of field monitoring,it is suggested that the average strains at different layers can be used as characteristic parameters for estimating the health conditions of lining structures in service.The analysis results provide a practical reference for the design and health evaluation of water conveyance shield tunnels with composite linings.展开更多
The coal metamorphism in Central Hunan pro-vides valuable information about hydrothermal activity and water/rock reactions.Learning how to collect age data on hydrothermal fluid systems is necessary for understanding ...The coal metamorphism in Central Hunan pro-vides valuable information about hydrothermal activity and water/rock reactions.Learning how to collect age data on hydrothermal fluid systems is necessary for understanding the history and genetic mechanisms of large-scale coal-generated graphite deposits.The Shihangli graphite deposit,formed by significant siliceous hydrothermal alteration,is the most distinctive in Central Hunan.Re–Os dating of pyrite from the Shihangli graphite deposit demonstrates that the coal-generated graphite mineraliza-tion age is-127.6±3.8 Ma.Based on in-situ mineral analysis,the hydrothermal pyrite in the Shihangli graphite deposit is mostly enriched in Sb,As,Au,W,Ag,Cu,Pb,and Zn.Based on the pyrite Re–Os isochron,the initial(^(187)Os/^(188)Os)values of pyrite were 1.03±0.24 and the Os(t)values varied from 571.8 to 755.1.Pyrite from the Shihangli graphite deposit comprises a Pb isotope composition similar to that of the Madiyi Formation bulk rock and stibnite from the Xikuangshan Sb deposit.Based on the Re–Os,Sr,S,and Pb isotopic compositions of sul-fides in the graphite and Sb deposits in Central Hunan,the Madiyi Formation was likely the primary source of ore-forming elements(Sb,Au,and As).The Re–Os and Pb isotope compositions of pyrite most likely reflect when large-scale fluid migration and coal-generated graphite mineralization occurred in Central Hunan.展开更多
The shape of rockfalls significantly affects the performance of the impact cushion,which is manifested by the difference in the impact force and the penetration depth of the rockfall during the collision.In this study...The shape of rockfalls significantly affects the performance of the impact cushion,which is manifested by the difference in the impact force and the penetration depth of the rockfall during the collision.In this study,we built the collision numerical model between rockfalls and cushions based on the results from previous studies,and simulated the collision process of rockfalls with four different shapes(cylindrical,cuboid,spherical,and cubic)and different cushions.Essential parameters when rockfalls impact cushions are calculated,including the maximum impact forces on the surface and bottom of the cushions and the maximum penetration depth of the rockfall.The results showed that the maximum impact force on the surface and the bottom of the cushions varies with the rockfall shapes.The maximum impact force on the cushion surface caused by cylindrical rockfall is the smallest,followed by the cuboid rockfall,the cube rockfall,and the spherical rockfall.The maximum impact force at the cushion bottom also follows this trend.However,the penetration depth of cuboid rockfall is the smallest,followed by the cylindrical rockfall,the cubic rockfall,and the spherical rockfall.The results of this study provide more extensive theoretical support for rockfall disaster prevention using gravel cushions.展开更多
In order to evaluate the stress sensitivity of carbonate reservoirs,a series of rock stress sensitivity tests were carried out under in-situ formation temperature and stress condition.Based on the calibration of capil...In order to evaluate the stress sensitivity of carbonate reservoirs,a series of rock stress sensitivity tests were carried out under in-situ formation temperature and stress condition.Based on the calibration of capillary pressure curve,the variable fractal dimension was introduced to establish the conversion formula between relaxation time and pore size.By using the nuclear magnetic resonance(NMR)method,the pore volume loss caused by stress sensitivity within different scales of pore throat was quantitatively analyzed,and the microscopic mechanism of stress sensitivity of carbonate gas reservoirs was clarified.The results show that fractures can significantly affect the stress sensitivity of carbonate reservoirs.With the increase of initial permeability,the stress sensitivity coefficient decreases and then increases for porous reservoirs,but increases monotonously for fractured-porous reservoirs.The pore volume loss caused by stress sensitivity mainly occurs for mesopores(0.02–0.50μm),contributing more than 50%of the total volume loss.Single high-angle fracture contributes 9.6%of the stress sensitivity and 15.7%of the irreversible damage.The microscopic mechanism of the stress sensitivity of carbonate gas reservoirs can be concluded as fracture closure,elastic contraction of pores and plastic deformation of rock skeleton.展开更多
The Dongnan Cu–Mo deposit,located in the southeast of the Zijinshan ore field(the largest porphyry–epithermal system in Southeast China),represents the complex magmatic and metallogenesis events in the region.The pe...The Dongnan Cu–Mo deposit,located in the southeast of the Zijinshan ore field(the largest porphyry–epithermal system in Southeast China),represents the complex magmatic and metallogenesis events in the region.The petrogenesis and metallogenesis of granitoids from the deposit are not determined,especially the interactions between ore-bearing(granodiorite porphyry)and barren samples(granodiorite and diorite).In the paper,the whole rock geochemical features shared a similar affinity to the middle-lower content and revealed that they derived from partial melting of the Cathaysian basement with the contribution of mantle materials,even represented that they generated in the plate subduction;LA-ICP-MS zircon U–Pb ages show that these granodiorites,granodioritic porphyry and diorite,were generated during 114–103 Ma.The ore-bearing samples mostly presented ε_(Hf)(t)of negative values(peak value is-4 to-3)with old two-stage Hf model ages(t_(DM)^(2))(peak value is 1.10–1.15 Ga),while the barren sample showed slightly negative ε_(Hf)(t)(peak value is-1 to 0)values with young t_(DM)^(2)(peak value is 1.00–1.05 Ga).The value of zircon Ce^(4+)/Ce^(3+)ratio mostly higher than 450 was first verified for the ore-bearing samples in the Dongnan Cu–Mo deposit,and the values of ore-bearing were found to be higher than those from the barren,which suggests that the ore-bearing formed in more oxidized parental magma with higher oxygen fugacity.Based on the geochemical characteristic of the element and isotope,we concluded that the Early Cretaceous multiphases magmatic activities,low melting temperature and low pressure of pluton,and high oxygen fugacity of zircon,were the favorable conditions for metallogenesis of Dongnan Cu–Mo deposit.展开更多
基金This work was financially supported by the National Natural Science Foundation of China(Grant Nos.42225702 and 42077235)the Open Research Project Program of the State Key Laboratory of Internet of Things for Smart City(University of Macao)(Grant No.SKL-IoTSC(UM)-2021-2023/ORP/GA10/2022)。
文摘Monitoring shear deformation of sliding zones is of great significance for understanding the landslide evolution mechanism,in which fiber optic strain sensing has shown great potential.However,the cor-relation between strain measurements of quasi-distributed fiber Bragg grating(FBG)sensing arrays and shear displacements of surrounding soil remains elusive.In this study,a direct shear model test was conducted to simulate the shear deformation of sliding zones,in which the soil internal deformation was captured using FBG strain sensors and the soil surface deformation was measured by particle image velocimetry(PIV).The test results show that there were two main slip surfaces and two secondary ones,developing a spindle-shaped shear band in the soil.The formation of the shear band was successfully captured by FBG sensors.A sinusoidal model was proposed to describe the fiber optic cable deformation behavior.On this basis,the shear displacements and shear band widths were calculated by using strain measurements.This work provides important insight into the deduction of soil shear deformation using soil-embedded FBG strain sensors.
基金The authors gratefully acknowledge the financial support pro-vided by the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.41907232)the National Science Fund for Distinguished Young Scholars of China(Grant No.42225702)the State Key Program of National Natural Science Foundation of China(Grant No.41230636).
文摘Anti-slide piles are one of the most important reinforcement structures against landslides,and evalu-ating the working conditions is of great significance for landslide mitigation.The widely adopted analytical methods of pile internal forces include cantilever beam method and elastic foundation beam method.However,due to many assumptions involved in calculation,the analytical models cannot be fully applicable to complex site situations,e.g.landslides with multi-sliding surfaces and pile-soil interface separation as discussed herein.In view of this,the combination of distributed fiber optic sensing(DFOS)and strain-internal force conversion methods was proposed to evaluate the working conditions of an anti-sliding pile in a typical retrogressive landslide in the Three Gorges reservoir area,China.Brillouin optical time domain reflectometry(BOTDR)was utilized to monitor the strain distri-bution along the pile.Next,by analyzing the relative deformation between the pile and its adjacent inclinometer,the pile-soil interface separation was profiled.Finally,the internal forces of the anti-slide pile were derived based on the strain-internal force conversion method.According to the ratio of calculated internal forces to the design values,the working conditions of the anti-slide pile could be evaluated.The results demonstrated that the proposed method could reveal the deformation pattern of the anti-slide pile system,and can quantitatively evaluate its working conditions.
基金We acknowledge the funding support from the National Science Fund for Distinguished Young Scholars of National Natural Science Foundation of China(Grant No.42225702)the National Natural Science Foundation of China(Grant No.42077235).
文摘Thermo-poro-mechanical responses along sliding zone/surface have been extensively studied.However,it has not been recognized that the potential contribution of other crucial engineering geological interfaces beyond the slip surface to progressive failure.Here,we aim to investigate the subsurface multiphysics of reservoir landslides under two extreme hydrologic conditions(i.e.wet and dry),particularly within sliding masses.Based on ultra-weak fiber Bragg grating(UWFBG)technology,we employ specialpurpose fiber optic sensing cables that can be implanted into boreholes as“nerves of the Earth”to collect data on soil temperature,water content,pore water pressure,and strain.The Xinpu landslide in the middle reach of the Three Gorges Reservoir Area in China was selected as a case study to establish a paradigm for in situ thermo-hydro-poro-mechanical monitoring.These UWFBG-based sensing cables were vertically buried in a 31 m-deep borehole at the foot of the landslide,with a resolution of 1 m except for the pressure sensor.We reported field measurements covering the period 2021 and 2022 and produced the spatiotemporal profiles throughout the borehole.Results show that wet years are more likely to motivate landslide motions than dry years.The annual thermally active layer of the landslide has a critical depth of roughly 9 m and might move downward in warmer years.The dynamic groundwater table is located at depths of 9e15 m,where the peaked strain undergoes a periodical response of leap and withdrawal to annual hydrometeorological cycles.These interface behaviors may support the interpretation of the contribution of reservoir regulation to slope stability,allowing us to correlate them to local damage events and potential global destabilization.This paper also offers a natural framework for interpreting thermo-hydro-poro-mechanical signatures from creeping reservoir bank slopes,which may form the basis for a landslide monitoring and early warning system.
基金the China Postdoctoral Science Foundation (No. 2022M723151)the Second Tibetan Plateau Scientific Expedition Research Program (No. 2019QZKK0704)+1 种基金the National Natural Science Foundation of China (No. 42172005, 41272026, 41972008, 31870200)the Strategic Priority Research Program (B) of the Chinese Academy of Sciences (XDB26000000)
文摘Understanding the paleoenvironment and phytogeographical history of the Tibetan Plateau,China relies on discovering new plant fossils.The Qaidam Basin has long been regarded as an ideal‘field laboratory’to investigate the paleoclimate and paleobiological evolution of the northern Tibetan Plateau.However,fossil angiosperms from the Qaidam Basin are rare,and our knowledge of its paleovegetation is poor.Here,we report fossil leaves and fruits of Betulaceae found from the Oligocene Shangganchaigou Formation of northwestern Qaidam Basin(Huatugou area).Comparative morphological analysis led us to assign the fruits to the Betula subgenus Betula and the leaves to Carpinus grandis.These findings,together with other reported fossil plants from the same locality,reveal a close floristic linkage between the Qaidam Basin and Europe during the Oligocene.The northern pathway of this floristic exchange may have crossed through the Qaidam Basin during the late Paleogene.This floristic linkage may have been facilitated by the continuous narrowing of the Turgai Strait and stronger westerlies,which transported moisture and provided favorable climatic conditions.Indeed,fossil plants collected from the Qaidam Basin suggest that during the Oligocene this region had warm and humid deciduous broad-leaf forest,which differs from the region’s modern vegetation and indicates that the Qaidam Basin may have been a suitable region for these plants to flourish and spread during the Oligocene.
基金supported by the National Key R&D Program of China (2018YFC0407004)the Fundamental Research Funds for the Central Universities (Nos.B200201059,2021FZZX001-14)the National Natural Science Foundation of China (Grant No.51709089)and 111 Project.
文摘When the geological environment of rock masses is disturbed,numerous non-persisting open joints can appear within it.It is crucial to investigate the effect of open joints on the mechanical properties of rock mass.However,it has been challenging to generate realistic open joints in traditional experimental tests and numerical simulations.This paper presents a novel solution to solve the problem.By utilizing the stochastic distribution of joints and an enhanced-fractal interpolation system(IFS)method,rough curves with any orientation can be generated.The Douglas-Peucker algorithm is then applied to simplify these curves by removing unnecessary points while preserving their fundamental shape.Subsequently,open joints are created by connecting points that move to both sides of rough curves based on the aperture distribution.Mesh modeling is performed to construct the final mesh model.Finally,the RB-DEM method is applied to transform the mesh model into a discrete element model containing geometric information about these open joints.Furthermore,this study explores the impacts of rough open joint orientation,aperture,and number on rock fracture mechanics.This method provides a realistic and effective approach for modeling and simulating these non-persisting open joints.
基金Foundation of China(Grant No.52261160382)for financial support.
文摘Biochar is a carbon sink material with the potential to improve water retention in various soils.However,for the long‐term maintenance of green infrastructure,there is an additional need to regulate the water contents in the covers to maintain vegetation growth in semiarid conditions.In this study,biochar‐amended soil was combined with subsurface drip irrigation,and the water preservation characteristics of this treatment were investigated through a series of one‐dimensional soil column tests.To ascertain the best treatment method specific to semiarid climatic conditions,the test soil was amended with 0%,1%,3%,and 5%biochar.Automatic irrigation devices equipped with soil moisture sensors were used to control the subsurface water content with the aim of enhancing vegetation growth.Each soil column test lasted 150 h,during which the volumetric water contents and soil suction data were recorded.The experimental results reveal that the soil specimen amended with 3%biochar is the most water‐saving regardless of the time cost.Soil with a higher biochar content(e.g.,5%)consumes a more significant amount of water due to the enhancement of the water‐holding capacity.Based on the experimental results,it can be concluded that the appropriate ratio can be determined within 1%–3%,which can reduce not only the amount of irrigated/used water but also the time cost.Such technology can be explored for water content regulation in green infrastructure and the development of barriers for protecting the environment around deep underground waste containment.
基金supported by the National Nature Science Foundation of China under grant No.42272350the Foundation of Shanxi Key Laboratory for Exploration and Exploitation of Geothermal Resources under grant No.SX202202.
文摘Underground Thermal Energy Storage(UTES)store unstable and non-continuous energy underground,releasing stable heat energy on demand.This effectively improve energy utilization and optimize energy allocation.As UTES technology advances,accommodating greater depth,higher temperature and multi-energy complementarity,new research challenges emerge.This paper comprehensively provides a systematic summary of the current research status of UTES.It categorized different types of UTES systems,analyzes the applicability of key technologies of UTES,and evaluate their economic and environmental benefits.Moreover,this paper identifies existing issues with UTES,such as injection blockage,wellbore scaling and corrosion,seepage and heat transfer in cracks,etc.It suggests deepening the research on blockage formation mechanism and plugging prevention technology,improving the study of anticorrosive materials and water treatment technology,and enhancing the investigation of reservoir fracture network characterization technology and seepage heat transfer.These recommendations serve as valuable references for promoting the high-quality development of UTES.
文摘In order to clarify the reservoir characteristics and main controlling factors of the flow three section of the K oil field in the Weixinan Depression, a study on the reservoir characteristics and main controlling factors of the flow three section of the K oil field in the Weixinan Depression has been carried out by utilizing the data of cores, casting thin sections, physical property tests and logging wells. The results show that the lithology of the reservoir in the flow three section of the study area is dominated by coarse sandstone and medium sandstone, followed by conglomerate-bearing sandstone and sand conglomerate. The porosity is mainly distributed in the range of medium-high porosity, and the permeability is mainly medium seepage, and the overall physical properties are good. The three sections of the stream in the study area mainly include four sedimentary microphases, namely, underwater diversion channel, estuarine dam, mat sand and inter-diversion bay. The underwater diversion channel has the best physical properties, characterized by coarse grains and low mud content. The medium and coarse sand content of various lithologic reservoirs is the main factor in the formation of high-quality reservoirs. Rock-forming action is an important factor affecting the physical properties of local reservoirs, comparing the compaction, cementation and dissolution between different sedimentary microphases, the underwater diverging river has the lowest rate of compaction and pore reduction, the highest rate of pore increase by dissolution, and the best physical properties. Therefore, the weakly cemented-strongly dissolved coarse sandstone phase developed in the microphase of the underwater diversion channel in section 3 of the flow in the study area is the most favorable reservoir.
基金The National Natural Science Foundation of China under contract No.42202157the China National Offshore Oil Corporation Co.,Ltd.Major Production and Scientific Research Program under contract No.2019KT-SC-22。
文摘Dissolution mechanism and favorable reservoir distribution prediction are the key problems restricting oil and gas exploration in deep-buried layers.In this paper,the Enping Formation and Zhuhai Formation in Baiyun Sag of South China Sea was taken as a target.Based on the thin section,scanning electron microscopy,X-ray diffraction,porosity/permeability measurement,and mercury injection,influencing factors of dissolution were examined,and a dissolution model was established.Further,high-quality reservoirs were predicted temporally and spatially.The results show that dissolved pores constituted the main space of the Paleogene sandstone reservoir.Dissolution primarily occurred in the coarse-and medium-grained sandstones in the subaerial and subaqueous distributary channels,while dissolution was limited in fine-grained sandstones and inequigranular sandstones.The main dissolved minerals were feldspar,tuffaceous matrix,and diagenetic cement.Kaolinization of feldspar and illitization of kaolinite are the main dissolution pathways,but they occur at various depths and temperatures with different geothermal gradients.Dissolution is controlled by four factors,in terms of depositional facies,source rock evolution,overpressure,and fault activities,which co-acted at the period of 23.8–13.8 Ma,and resulted into strong dissolution.Additionally,based on these factors,high-quality reservoirs of the Enping and Zhuhai formations are predicted in the northern slope,southwestern step zone,and Liuhua uplift in the Baiyun Sag.
基金Fundamental Research Funds for the Central Universities(No.B230201012)National Natural Science Foundation of China(No.42104009)China Postdoctoral Science Foundation(No.2022M720988)。
文摘Total Electron Content(TEC)and electron density enhancement were observed on the day before 17 March 2015 great storm in the China Region.Observations from ground-and space-based instruments are used to investigate the temporal and spatial evolution of the pre-storm enhancement.TEC enhancement was observed from 24°N to 30°N after 10:00 UT at 105°E,110°E and 115°E longitudes on March 16.The maximum magnitude of TEC enhancement was more than 10 TECU and the maximal relative TEC enhancement exceeded 30%.Compared with geomagnetic quiet days,the electron density of Equatorial Ionization Anomaly(EIA)northern peak from Swarm A/C satellites on March 16 was larger and at higher latitudes.NmF2 enhanced during 11:30—21:00 UT at Shaoyang Station and increased by 200%at~16:00 UT.However,TEC and electron density enhancement were not accompanied by a significant change of hmF2.Most research has excluded some potential mechanisms as the main driving factors for storm-time density enhancements by establishing observational constraints.In this paper,we observed pre-storm enhancement in electron density at different altitudes and Equatorial Electrojet(EEJ)strength results derived from ground magnetometers observations suggest an enhanced eastward electric field from the E region probably played a significant role in this event.
基金supported by the National Natural Science Foundation of China(No. 40373025)
文摘Jinshan gold deposit is located in northeastern Jiangxi,South China,which is related to the ductile shear zone.It has a gold reserve of more than 200 tons,with 80%of gold occurring in pyrite. The LREE of gold-bearing pyrite is as higher as 171.664 ppm on average,with relatively higher light rare earth elements(LREE;159.556 ppm) and lower HREE(12.108 ppm).TheΣLREE/ΣHREE ratio is 12.612 and(La/Yb)_N is 11.765.These indicate that pyrite is rich in LREE.The(La/Sm)_N ratio is 3.758 and that of(Gd/Yb)_N is 1.695.These are obvious LREE fractionations.The rare earth element(REE) distribution patterns show obvious Eu anomaly with averageδEu values of 0.664,andδCe anomalies of 1.044.REE characteristics are similar to those of wall rocks(regional metamorphic rocks),but different from those of the Dexing granodiorite porphyry and Damaoshan biotite granite.These features indicate that the ore-forming materials in the Jinshan gold deposit derived from the wall rocks, and the ore-forming fluids derived from metamorphic water.The Co/Ni ratio(average value 0.38) of pyrite suggests that the Jinshan gold deposit formed under a medium-low temperature.It is inferred from the values of high-field strength elements,LREE,Hf/Sm,Nb/La,and Th/La of the pyrite that the ore-forming fluids of the Jinshan gold deposit derived from metamorphic water with Cl〉F.
基金partly supported by the Natural Science Foundation of China(41274056)the National Science Foundation of the United States(EAR-1215824),and Department of Geology,UIUC
文摘We present a 3D model of shear velocity of crust and upper mantle in China and surrounding regions from surface wave tomography. We combine dispersion measurements from ambient noise correlation and traditional earthquake data. The stations include the China National Seismic Network, global networks, and all the available PASSCAL stations in the region over the years. The combined data sets provide excellent data coverage of the region for surface wave measurements from 8 to 120 s, which are used to invert for 3D shear wave velocity structure of the crust and upper mantle down to about 150 kin. We also derive new models of the study region for crustal thickness and averaged S velocities for upper, mid, and lower crust and the uppermost mantle. The models provide a fundamental data set for understanding continental dynamics and evolution. The tomography results reveal significant features of crust and upper mantle structure, including major basins, Moho depth variation, mantle velocity contrast between eastern and western North China Craton, widespread low-velocity zone in mid- crust in much of the Tibetan Plateau, and clear velocity contrasts of the mantle lithosphere between north and southern Tibet with significant E-W variations. The low velocity structure in the upper mantle under north and eastern TP correlates with surface geological boundaries. A patch of high velocity anomaly is found under the eastern part of the TP, which may indicate intact mantle lithosphere. Mantle lithosphere change from the western to The Tanlu Fault appears boundary. shows striking systematic eastern North China Craton. to be a major lithosphere
基金financially supported by the National12th Five Year Plan Project(No.DY-125-13-R-05)Natural Sciences Foundation of China(No.40343019.40473024)+2 种基金project from the State Key Laboratory for Mineral Deposits Research in Nanjing University(No.20-15-07)the Project Supported by Guangdong Province Universities and Colleges Pearl River Scholar Funded Scheme(2011)the Fundamental Research Funds for Central Universities(No.121gjc05,091gpy09)
文摘The rare earth elements(REE) composition of the polymetallic crusts and nodules obtained from the South China Sea(SCS) were analyzed through inductively coupled plasma mass spectrometry.Results revealed great differences in the REE abundances(∑REE) of the SCS polymetallic crusts and nodules; the crusts show the highest ∑REE, whereas the nodules exhibit the lowest ∑REE. The similarity in their NASC-normalized patterns, the enriched light REE(LREE), the markedly positive Ce anomaly(δCe), and the non-or weakly positive Eu anomaly(δEu), suggest that the polymetallic crusts and nodules are of hydrogenetic origin. Moreover, the REE contents and their relevant parameters are quite different among the various layers of the crusts and nodules, which probably results from the different marginal sea environments and mineral assemblages of the samples. The growth profiles of the SCS polymetallic crusts and nodules reveal the tendency ∑REE and δCe to slightly increase from the outer to the inner layers, suggesting that the growth environments of these samples changed smoothly from an oxidizing to a relatively reducing environment; in addition, the crust ST1 may have experienced a regressive event(sea-level change) during its growth, although the REE composition of the seawater remained relatively stable. On the basis of the regional ∑REE distribution in the SCS crusts and nodules,the samples collected near the northern margin were influenced by terrigenous material more strongly compared with the other samples, and the REE contents are relatively low. Therefore, the special geotectonic environment is a significant factor influencing the abundance of elements, including REE and other trace elements. Compared with the oceanic seamount crusts and deep-sea nodules from other oceans,the SCS polymetallic crusts and nodules exhibit special REE compositions and shale-normalized patterns, implying that the samples are of marginal sea-type Fe-Mn sedimentary deposits, which are strongly affected by the epicontinental environment, and that they grew in a more oxidative seawater environment. This analysis indicates that the oxidized seawater environment and the special nano property of their Fe-Mn minerals enrich the REE adsorption.
基金supported by the National Natural Science Foundation of China(Grant No.U2167212)。
文摘Under the new development philosophy of carbon peaking and carbon neutrality,CO_(2)and O_(2)in situ leaching(ISL)has been identified as a promising technique for uranium mining in China,not only because it solves carbon dioxide utilization and sequestration,but it also alleviates the environmental burden.However,significant challenges exist in assessment of CO_(2)footprint and water-rock interactions,due to complex geochemical processes.Herein this study conducts a three-dimensional,multicomponent reactive transport model(RTM)of a field-scale CO_(2)and O_(2)ISL process at a typical sandstone-hosted uranium deposit in Songliao Basin,China.Numerical simulations are performed to provide new insight into quantitative interpretation of the greenhouse gas(CO_(2))footprint and environmental impact(SO_(4)^(2–))of the CO_(2)and O_(2)ISL,considering the potential chemical reaction network for uranium recovery at the field scale.RTM results demonstrate that the fate of the CO_(2)could be summarized as injected CO_(2)dissolution,dissolved CO_(2)mineralization and storage of CO_(2)as a gas phase during the CO_(2)and O_(2)ISL process.Furthermore,compared to acid ISL,CO_(2)and O_(2)ISL has a potentially smaller environmental footprint,with 20%of SO_(4)^(2–)concentration in the aquifer.The findings improve our fundamental understanding of carbon utilization in a long-term CO_(2)and O_(2)ISL system and provide important environmental implications when considering complex geochemical processes.
基金The authors grate fully acknowledge the financial support provided by the National Natural Science Foundation of China(Grant Nos.42225702 and 42077235)the Open Research Project Program of the State Key Laboratory of Internet of Things for Smart City(University of Macao),China(Grant No.SKUoTSC(UM)-2021-2023/0RP/GA10/2022).
文摘Defects in cast-in-situ piles have an adverse impact on load transfer at the pile‒soil interface and pile bearing capacity. In recent years, thermal integrity profiling (TIP) has been developed to measure temperature profiles of cast-in-situ piles, enabling the detection of structural defects or anomalies at the early stage of construction. However, using this integrity testing method to evaluate potential defects in cast-in-situ piles requires a comprehensive understanding of the mechanism of hydration heat transfer from piles to surrounding soils. In this study, small-scale model tests were conducted in laboratory to investigate the performance of TIP in detecting pile integrity. Fiber-optic distributed temperature sensing (DTS) technology was used to monitor detailed temperature variations along model piles in sand. Additionally, sensors were installed in sand to measure water content and matric suction. An interpretation method against available DTS-based thermal profiles was proposed to reveal the potential defective regions. It shows that the temperature difference between normal and defective piles is more obvious in wet sand. In addition, there is a critical zone of water migration in sand due to the water absorption behavior of cement and temperature transfer-induced water migration in the early-age concrete setting. These findings could provide important insight into the improvement of the TIP testing method for field applications.
基金This work was financially supported by the National Natural Science Foundation of China(Grant Nos.42225702 and 42077235)the Postgraduate Research&Practice Innovation Program of Jiangsu Province,China(Grant No.KYCX22_0162)the scientific research project of Guangdong Yue Hai Pearl River Delta Water Supply Co.,Ltd.The authors thank Guangqing Wei,Lixiang Jia,and Zhen Zhang,all of Suzhou Nanzee Sensing Co.,Ltd.,for their assistance in the tests.The valuable suggestions provided by Professor Baojun Wang,Nanjing University,are also gratefully acknowledged.
文摘For long-distance water conveyance shield tunnels in operation,the high internal water pressure may cause excessive deformation of composite linings,affecting their structural integrity and serviceability.However,the deformation and failure characteristics of lining structures under internal water pressure are not well investigated in the literature,particularly for three-layer composite linings.This study presents an in situ experimental investigation on the response of two types of composite linings(i.e.separated and combined lining structures)subjected to internal pressures,in which a fiber optic nerve system(FONS)equipped with distributed strain and displacement sensing nerves was employed to monitor the performance of the two composite linings during testing.The experimental results clearly show that the damage of the tunnel lining under different internal pressures was mainly located in the self-compaction concrete layer.The separated lining structure responded more aggressively to the variations in internal pressures than the combined one.Moreover,two evaluation indices,i.e.radial displacement and effective stiffness coefficient,are proposed for describing the changes in the structural bearing performance.The effective stiffness coefficients of the two types of lining structures were reduced by 39.4%and 29.5%,respectively.Considering the convenience of field monitoring,it is suggested that the average strains at different layers can be used as characteristic parameters for estimating the health conditions of lining structures in service.The analysis results provide a practical reference for the design and health evaluation of water conveyance shield tunnels with composite linings.
基金the National Key Research and Development Program of China(2016YFC0600207,2014CB440904)National Natural Science Foundation of China(Nos.42062006,41962007)the Integrated Exploration Project of China Geological Survey(No.12120114034501).
文摘The coal metamorphism in Central Hunan pro-vides valuable information about hydrothermal activity and water/rock reactions.Learning how to collect age data on hydrothermal fluid systems is necessary for understanding the history and genetic mechanisms of large-scale coal-generated graphite deposits.The Shihangli graphite deposit,formed by significant siliceous hydrothermal alteration,is the most distinctive in Central Hunan.Re–Os dating of pyrite from the Shihangli graphite deposit demonstrates that the coal-generated graphite mineraliza-tion age is-127.6±3.8 Ma.Based on in-situ mineral analysis,the hydrothermal pyrite in the Shihangli graphite deposit is mostly enriched in Sb,As,Au,W,Ag,Cu,Pb,and Zn.Based on the pyrite Re–Os isochron,the initial(^(187)Os/^(188)Os)values of pyrite were 1.03±0.24 and the Os(t)values varied from 571.8 to 755.1.Pyrite from the Shihangli graphite deposit comprises a Pb isotope composition similar to that of the Madiyi Formation bulk rock and stibnite from the Xikuangshan Sb deposit.Based on the Re–Os,Sr,S,and Pb isotopic compositions of sul-fides in the graphite and Sb deposits in Central Hunan,the Madiyi Formation was likely the primary source of ore-forming elements(Sb,Au,and As).The Re–Os and Pb isotope compositions of pyrite most likely reflect when large-scale fluid migration and coal-generated graphite mineralization occurred in Central Hunan.
基金supported by the National Key Research and Development Program of China(2022YFC3080100)the National Natural Science Foundation of China(Grant No.52104125)+2 种基金opening research fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.SKLGME021009)the Basic Research Program of Guizhou ProvinceZK[2022]General 166opening fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Chengdu University of Technology)(Grant No.SKLGP2022K007)。
文摘The shape of rockfalls significantly affects the performance of the impact cushion,which is manifested by the difference in the impact force and the penetration depth of the rockfall during the collision.In this study,we built the collision numerical model between rockfalls and cushions based on the results from previous studies,and simulated the collision process of rockfalls with four different shapes(cylindrical,cuboid,spherical,and cubic)and different cushions.Essential parameters when rockfalls impact cushions are calculated,including the maximum impact forces on the surface and bottom of the cushions and the maximum penetration depth of the rockfall.The results showed that the maximum impact force on the surface and the bottom of the cushions varies with the rockfall shapes.The maximum impact force on the cushion surface caused by cylindrical rockfall is the smallest,followed by the cuboid rockfall,the cube rockfall,and the spherical rockfall.The maximum impact force at the cushion bottom also follows this trend.However,the penetration depth of cuboid rockfall is the smallest,followed by the cylindrical rockfall,the cubic rockfall,and the spherical rockfall.The results of this study provide more extensive theoretical support for rockfall disaster prevention using gravel cushions.
基金Supported by the PetroChina Technological Research Project(2021DJ3301)Scientific Research Project of Shaanxi Provincial Department of Education,China(20JK0848)。
文摘In order to evaluate the stress sensitivity of carbonate reservoirs,a series of rock stress sensitivity tests were carried out under in-situ formation temperature and stress condition.Based on the calibration of capillary pressure curve,the variable fractal dimension was introduced to establish the conversion formula between relaxation time and pore size.By using the nuclear magnetic resonance(NMR)method,the pore volume loss caused by stress sensitivity within different scales of pore throat was quantitatively analyzed,and the microscopic mechanism of stress sensitivity of carbonate gas reservoirs was clarified.The results show that fractures can significantly affect the stress sensitivity of carbonate reservoirs.With the increase of initial permeability,the stress sensitivity coefficient decreases and then increases for porous reservoirs,but increases monotonously for fractured-porous reservoirs.The pore volume loss caused by stress sensitivity mainly occurs for mesopores(0.02–0.50μm),contributing more than 50%of the total volume loss.Single high-angle fracture contributes 9.6%of the stress sensitivity and 15.7%of the irreversible damage.The microscopic mechanism of the stress sensitivity of carbonate gas reservoirs can be concluded as fracture closure,elastic contraction of pores and plastic deformation of rock skeleton.
基金provided by the Opening Foundation of State Key Laboratory of Continental Dynamics(Grant No.21LCD08),Northwest University,China.
文摘The Dongnan Cu–Mo deposit,located in the southeast of the Zijinshan ore field(the largest porphyry–epithermal system in Southeast China),represents the complex magmatic and metallogenesis events in the region.The petrogenesis and metallogenesis of granitoids from the deposit are not determined,especially the interactions between ore-bearing(granodiorite porphyry)and barren samples(granodiorite and diorite).In the paper,the whole rock geochemical features shared a similar affinity to the middle-lower content and revealed that they derived from partial melting of the Cathaysian basement with the contribution of mantle materials,even represented that they generated in the plate subduction;LA-ICP-MS zircon U–Pb ages show that these granodiorites,granodioritic porphyry and diorite,were generated during 114–103 Ma.The ore-bearing samples mostly presented ε_(Hf)(t)of negative values(peak value is-4 to-3)with old two-stage Hf model ages(t_(DM)^(2))(peak value is 1.10–1.15 Ga),while the barren sample showed slightly negative ε_(Hf)(t)(peak value is-1 to 0)values with young t_(DM)^(2)(peak value is 1.00–1.05 Ga).The value of zircon Ce^(4+)/Ce^(3+)ratio mostly higher than 450 was first verified for the ore-bearing samples in the Dongnan Cu–Mo deposit,and the values of ore-bearing were found to be higher than those from the barren,which suggests that the ore-bearing formed in more oxidized parental magma with higher oxygen fugacity.Based on the geochemical characteristic of the element and isotope,we concluded that the Early Cretaceous multiphases magmatic activities,low melting temperature and low pressure of pluton,and high oxygen fugacity of zircon,were the favorable conditions for metallogenesis of Dongnan Cu–Mo deposit.