The Origin of Mesozoic A-type Granitoids,Fujian Province,Southeast China:Insights from Geochronology,Mineralogy and Geochemistry

The magma sources,origins and precise forming ages of the miarolite from Qishan and Kuiqi intrusions are still uncertain.New results reveal that,miarolites from the Qishan and Kuiqi intrusions yield crystallization ages of~101 and~98 Ma,and they have a high formation temperature(~910℃)and low oxygen fugacity value,indicating crystallization condition at low pressure in the upper crust with temperature of 678℃.The Qishan and Kuiqi miarolites are characterized by enrichment in SiO_(2) and high-K alkali,depletion in Ca and Mg,and belong to the high-K weak peraluminous rock series.The samples are enriched in HFSEs(i.e.,Ta,Zr and Hf)and LILEs(i.e.,Ba,P and Sr),depleted in Ba and Sr with the negative anomaly of Eu.In the primitive mantle normalized trace element spider diagram,the samples show a right-inclined‘seagull-type’pattern,combined the ratios of(La/Yb)_(N),10000×Al/Ga,Rb/Nb and Nb/Ta etc.,they were proved to be alkaline A-type granite.Combined the characterize of the trace elements,they were derived from clay-rich source accompanied pelite melting,and subjected to K-feldspar crystallization fractional.The values of ε_(Hf)(t)and tDM2 are distributed in the range of-2.8 to 3.3 with~1.2 Ga,and-6.0 to 4.0 with~1.2 Ga,revealing that they were generated from the Mesoproterozoic Cathaysia basement rocks.The comprehensive research reveals the Kuiqi and Qishan intrusions derived from crust-mantle mixing and partial melting of the crust,respectively,resulting from lithospheric extension generated by the Paleo-Pacific Plate subducted into the European-Asian Plate.

Biomineralization of soil with crude soybean urease using different calcium salts

Calcium salt is an important contributing factor for calcium-based biomineralization.To study the effect of calcium salt on soil biomineralization using crude soybean urease,the calcium salts,including the calcium chloride (CaCl_(2)),calcium acetate ((CH_(3)COO)_(2)Ca) and calcium nitrate (Ca(NO_(3))_(2)),were used to prepare the biotreatment solution to carry out the biomineralization tests in this paper.Two series of biomineralization tests in solution and sand column,respectively,were conducted.Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were performed to determine the microscopic characteristics of the precipitated calcium carbonate (CaCO_(3)) crystals.The experimental results indicate that the biomineralization effect is the best for the CaCl2 case,followed by (CH_(3)COO)_(2)Ca,and worst for Ca(NO_(3))_(2) under the test conditions of this study (i.e.1 mol/L of calcium salt-urea).The mechanism for the effect of the calcium salt on the biomineralization of crude soybean urease mainly involves: (1) inhibition of urease activity,and (2) influence on the crystal size and morphology of CaCO_(3).Besides Ca^(2+) ,the anions in solution can inhibit the activity of crude soybean urease,and NO_(3)− has a stronger inhibitory effect on the urease activity compared with both CH_(3)COO^(−) and Cl^(−) .The co-inhibition of Ca^(2+) and NO_(3)− on the activity of urease is the key reason for the worst biomineralization of the Ca(NO_(3))_(2) case in this study.The difference in biomineralization between the CaCl_(2) and (CH_(3)COO)_(2) Ca cases is strongly correlated with the crystal morphology of the precipitated CaCO_(3).

Predicting dynamic compressive strength of frozen-thawed rocks by characteristic impedance and data-driven methods

In cold regions,the dynamic compressive strength(DCS)of rock damaged by freeze-thaw weathering significantly influences the stability of rock engineering.Nevertheless,testing the dynamic strength under freeze-thaw weathering conditions is often both time-consuming and expensive.Therefore,this study considers the effect of characteristic impedance on DCS and aims to quickly determine the DCS of frozen-thawed rocks through the application of machine-learning techniques.Initially,a database of DCS for frozen-thawed rocks,comprising 216 rock specimens,was compiled.Three external load parameters(freeze-thaw cycle number,confining pressure,and impact pressure)and two rock parameters(characteristic impedance and porosity)were selected as input variables,with DCS as the predicted target.This research optimized the kernel scale,penalty factor,and insensitive loss coefficient of the support vector regression(SVR)model using five swarm intelligent optimization algorithms,leading to the development of five hybrid models.In addition,a statistical DCS prediction equation using multiple linear regression techniques was developed.The performance of the prediction models was comprehensively evaluated using two error indexes and two trend indexes.A sensitivity analysis based on the cosine amplitude method has also been conducted.The results demonstrate that the proposed hybrid SVR-based models consistently provided accurate DCS predictions.Among these models,the SVR model optimized with the chameleon swarm algorithm exhibited the best performance,with metrics indicating its effectiveness,including root mean square error(RMSE)﹦3.9675,mean absolute error(MAE)﹦2.9673,coefficient of determination(R^(2))﹦0.98631,and variance accounted for(VAF)﹦98.634.This suggests that the chameleon swarm algorithm yielded the most optimal results for enhancing SVR models.Notably,impact pressure and characteristic impedance emerged as the two most influential parameters in DCS prediction.This research is anticipated to serve as a reliable reference for estimating the DCS of rocks subjected to freeze-thaw weathering.

Spatio-temporal Variation Characteristics of Extreme Climate Events and Their Teleconnections to Large-scale Ocean-atmospheric Circulation Patterns in Huaihe River Basin,China During 1959–2019

Huaihe River Basin(HRB) is located in China’s north-south climatic transition zone,which is very sensitive to global climate change.Based on the daily maximum temperature,minimum temperature,and precipitation data of 40 meteorological stations and nine monthly large-scale ocean-atmospheric circulation indices data during 1959–2019,we present an assessment of the spatial and temporal variations of extreme temperature and precipitation events in the HRB using nine extreme climate indices,and analyze the teleconnection relationship between extreme climate indices and large-scale ocean-atmospheric circulation indices.The results show that warm extreme indices show a significant(P < 0.05) increasing trend,while cold extreme indices(except for cold spell duration) and diurnal temperature range(DTR) show a significant decreasing trend.Furthermore,all extreme temperature indices show significant mutations during 1959-2019.Spatially,a stronger warming trend occurs in eastern HRB than western HRB,while maximum 5-d precipitation(Rx5day) and rainstorm days(R25) show an increasing trend in the southern,central,and northwestern regions of HRB.Arctic oscillation(AO),Atlantic multidecadal oscillation(AMO),and East Atlantic/Western Russia(EA/WR) have a stronger correlation with extreme climate indices compared to other circulation indices.AO and AMO(EA/WR) exhibit a significant(P < 0.05) negative(positive)correlation with frost days and diurnal temperature range.Extreme warm events are strongly correlated with the variability of AMO and EA/WR in most parts of HRB,while extreme cold events are closely related to the variability of AO and AMO in eastern HRB.In contrast,AMO,AO,and EA/WR show limited impacts on extreme precipitation events in most parts of HRB.

Development and applications of the quasi‐dynamic triaxial apparatus for deep rocks

The mechanical behaviors of deep rocks have always posed a challenge for the implementation and safe operation of major underground engineering projects.To this end,this study modified the existing mainstream rock mechanics instruments equipped with a dynamic disturbance loading system and developed a second‐generation TFD‐2000/D triaxial instrument.The first‐generation device is equipped with an independent disturbance system and an advanced EDC‐580 all‐digital servo controller,which can apply disturbing load independently,implement the function of cyclic disturbance,and combine dynamic and static disturbances.The instrument was found to be reliable for use in analyzing the damage process of rocks in the disturbance test of marbles.The second‐generation instrument tackles three limitations of the first‐generation instrument:(i)it upgrades the strain measurement system and uses extensometers with linear variable differential transformers to accurately measure deformation;(ii)it uses the self‐balanced chamber to replace the Hoek–Franklin triaxial cell and auto‐balancing triaxial pressure chamber;and(iii)the loading rod is independently equipped with an EDC‐580 all‐digital servo controller,which measures precise loads.The experimental findings confirmed that the second‐generation instrument can be used for rock mechanics testing under cyclic disturbance loading,the disturbance–stress relaxation cycle,and the creep–fatigue cycle.In this sense,the second‐generation instrument can be a useful addition to deep rock mechanical instruments and provide a valuable reference.

Compressive performance of innovative reinforced pillars in closed/abandoned mines

Pillar is closely related to the stability and reliability of underground spaces in closed/abandoned mines.The present research introduced a new technique to strengthen square cement mortar columns via fiber-reinforced polymer(FRP)strips to verify the strengthening effect of FRP on pillars.Compared to a fully wrapped FRP jacket,the advantages of FRP strip are cost-effective and easy-to-construct.A series of compression tests as well as theoretical analysis were carried out to explore the mechanical behavior of square cement mortar specimens partially strengthened with FRP strips.The results verified the effectiveness of FRP strips in enhancing the stress and strain of cement mortar.Different from unconfined cement mortar specimens,these FRP-strengthened cement mortar specimens are featured with the double-peaked behaviors,mainly attributed to the stress state transformation from a one-dimensional to a three-dimensional stress state.It also indicated that the enhancement of stress increased with the FRP strip width.Moreover,the brittle-ductile transition ductile failure characteristics were also observed in FRP-confined cement mortar specimens.The ultimate ductility of the cement mortar specimen decreases gradually with the growth of the FRP strip width.The main contribution of this research is to enrich the strengthening techniques for residual pillars.

Identification of the Caroline Plate boundary:constraints from magnetic anomaly

The Caroline Plate is located among the Pacific Plate,the Philippine Sea Plate,and the India Australia Plate,and plays a key role in controlling the spreading direction of the Philippine Sea Plate.The Caroline Submarine Plateau(or Caroline Ridge)and the Eauripik Rise on the south formed a remarkable T-shaped large igneous rock province,which covered the northern boundary between the Caroline Plate and the Pacific Plate.However,relationship between these tectonic units and magma evolution remains unclear.Based on magnetic data from the Earth Magnetic Anomaly Grid(2-arc-minute resolution)(V2),the normalized vertical derivative of the total horizontal derivative(NVDR-THDR)technique was used to study the boundary of the Caroline Plate.Results show that the northern boundary is a transform fault that runs 1400 km long in approximately 28 km wide along the N8°in E-W direction.The eastern boundary is an NNW-SSE trending fault zone and subduction zone with a width of tens to hundreds of kilometers;and the north of N4°is a fracture zone of dense faults.The southeastern boundary may be the Lyra Trough.The area between the southwestern part of the Caroline Plate and the Ayu Trough is occupied by a wide shear zone up to 100 km wide in nearly S-N trending in general.The Eauripik transform fault(ETF)in the center of the Caroline Plate and the fault zones in the east and west basins are mostly semi-parallel sinistral NNW-SSE–trending faults,which together with the eastern boundary Mussau Trench(MT)sinistral fault,the northern Caroline transform fault(CTF),and the southern shear zone of the western boundary,indicates the sinistral characteristics of the Caroline Plate.The Caroline hotspot erupted in the Pacific Plate near the CTF and formed the west Caroline Ridge,and then joined with the Caroline transform fault at the N8°.A large amount of magma erupted along the CTF,by which the east Caroline Ridge was formed.At the same time,a large amount of magma developed southward via the eastern branch of the ETF,forming the northern segment of the Eauripik Rise.Therefore,the magmatic activity of the T-shaped large igneous province is obviously related to the fault structure of the boundary faults between the Caroline Plate and Pacific Plate,and the active faults within the Caroline Plate.

Influence of lithospheric thickness distribution on oil and gas basins,China seas and adjacent areas

The distribution of oil and gas resources is intricately connected to the underlying structure of the lithosphere.Therefore,investigating the characteristics of lithospheric thickness and its correlation with oil and gas basins is highly important.This research utilizes recently enhanced geological–geophysical data,including topographic,geoid,rock layer thickness,variable rock layer density,and interface depth data.Employing the principles of lithospheric isostasy and heat conduction,we compute the laterally varying lithospheric thickness in the China seas and adjacent areas.From these results,two pivotal parameters for different types of oil and gas basins were statistically analyzed:the minimum lithospheric thickness and the relative fluctuation in lithospheric thickness.A semiquantitative analysis was used to explore the connection between these parameters and the hydrocarbon abundance within the oil and gas basins.This study unveils distinct variations in lithospheric thickness among basins,with oil and gas rich basins exhibiting a thicker lithosphere in the superimposed basins of central China and a thinner lithosphere in the rift basins of eastern China.Notably,the relative fluctuations in lithospheric thickness in basins demonstrate significant disparities:basins rich in oil and gas often exhibit greater thickness fluctuations.Additionally,in the offshore basins of China,a conspicuous negative linear correlation is observed between the minimum lithospheric thickness and the relative fluctuation in lithospheric thickness.This study posits that deep-seated thermal upwelling results in lithospheric undulations and extensional thinning in oil and gas basins.Concurrently,sustained deep-seated heat influences sedimentary materials in basins,creating favorable conditions for oil and gas generation.The insights derived from this study contribute to a quantitative understanding of the intricate relationships between deep lithospheric structures and oil and gas basins.These findings provide valuable guidance for future oil and gas exploration in the studied areas.

Petrology of Spinel-Lherzolite Xenoliths from Mazéléand Others Northen Xenoliths Localities of Cameroon Volcanic Line: Exchange Reactions and Equilibrium State

The alkaline volcanism of the Cameroon Volcanic Line in its northern domain has raised many fresh enclaves of peridotites. The samples selected come from five (05) different localities (Liri, in the plateau of Kapsiki, Mazélé in the NE of Ngaoundéré, Tello and Ganguiré in the SE of Ngaoundéré and Likok, locality located in the west of Ngaoundé). The peridotite enclaves of the above localities show restricted mineralogical variation. Most are four-phase spinel-lherzolites, indicating that this is the main lithology that forms the lithospheric mantle below the shallow zone. No traces of garnet or primary plagioclase were detected, which strongly limits the depth range from which the rock fragments were sampled. The textures and the wide equilibrium temperatures (884˚C - 1115˚C) indicate also entrainment of lherzolite xenoliths from shallow depths within the lithosphere and the presence of mantle diapirism. The exchange reactions and equilibrium state established in this work make it possible to characterize the chemical composition of the upper mantle of each region and test the equilibrium state of the phases between them. Variations of major oxides and incompatible elemental concentrations in clinopyroxene indicate a primary control by partial melting. The absence of typical “metasomatic” minerals, low equilibration temperatures and enriched LREE patterns indicate that the upper mantle below septentrional crust of Cameroun underwent an event of cryptic metasomatic enrichment prior to partial melting. The distinctive chemical features, LREE enrichment, strong U, Ce and Pr, depletion relative to Ba, Nb, La, Pb, and T, fractionation of Zr and Hf and therefore ligh high Zr/Hf ratio, low La/Yb, Nb/La and Ti/Eu are all results of interaction of refractory peridotite residues with carbonatite melts.

Mobility of Major and Trace Elements during the Bauxitization Processes in Ngaoundal Area (Adamawa Cameroon): Implication on Mining Perspectives

This study was focused to assess major and trace elements in bauxitic duricrusts from Ngaoundal and its surroundings in order to establish their mining interest. To this end, fieldworks, mineralogical and geochemical analyses were carried out. Four facies of duricrust were identified and characterized from the summit to the top of the slope of the Ngaoundal mountain: scoriaceous, pisolitic, nodular and massive. Mineralogical and geochemical analyses performed on 16 samples, revealed a significant concentration of Al2O3 mainly in the scoriaceous facies (over 45% in grade), moderate in Fe2O3 (averaging 23.69%) and SiO2 (averaging 21.7%). Trace elements were generally low, excluding Cr (421 ppm on average), Zr (327 ppm on average and V (213 ppm on average). In addition, the limited quantities of alkalis (Na2O, K2O) and alkaline earths metals (MgO, CaO) coupled with the very high values of Chemical Index of Alteration (CIA) and Mineralogical Index of Alteration (MIA), (more than 99%) attest to the intense weathering of the studied materials. Allitization and monosiallitization constituted the crystallochemical phenomena that have led to the development of bauxitic minerals. More than 90% of gibbsite in scoriaceous facies, 52.21% - 76.01% of kaolinite in pisolitic facies and more than 40% of hematite in nodular facies were quantified. The relationships between the constitutive components indicated their interdependency during the bauxitization phenomenon. The mineralogical and geochemical properties highlighted the mining interest of the studied duricrusts to be valorized.

Non-Destructive Detection and Evaluation of Heavy Metal Pollution in Tailings Reservoir

Heavy metal pollution is a negative effect generated in the process of utilizing non-ferrous mineral. Studies about heavy metal migration detection are very important. A new method for rapid detection of heavy metal migration based on ground penetrating radar (GPR) was provided. Comparative tests were studied from field to lab with GPR and X-ray fluorescence analysis (XRF). A tailings reservoir in the Xiangjiang River basin at Hunan Province was taken as experimental site. The downward transfer rule of heavy metal migration was confirmed through tests on systematically arranged survey lines and sampling points in tailings site. Results showed: 1) Through GPR image recognition, tailings reservoir had 3 layers. Reclaimed soil layer (the first layer) and tailings layer (the second layer) had a clear interface. However, tailings layer (the second layer) and subsoil layer (the third layer) had an obscure interface on radar images. It was concluded that heavy metal component had migrated downwards. 2) Chemical component analysis verified image recognition conclusions. Concentrations of As, Cd and Pb were significantly out of limit, while concentration of Cr was under limit according to analysis results on samples from different depths. 3) Pollution degree was evaluated. Downward migration was the main form of heavy metal migration in tailings site, upward migration occurred through adsorption at the same time.

Joint Management of Shared Resources, Issues and Conflicts of the Nso and Oku Tribes in the Ngongbaa Montane Forest Area, NWR of Cameroon

Wherever people live together in or near homelands that harbour joint natural resources such as forest, water, minerals, oil etc., they must collaborate, co-exist and share these resources irrespective of their genetic, social, cultural, and political peculiarities. This is not always the case when self-interest, ethnic divisions, elitist politics, economic interest and power tussle set in. The Nso and Oku people who reside in the Ngongbaa Forest area constitute an example of joint management of resources where at one period, their relationship over the management of the Oku Mountain Forest was cordial and at another, the relationship became conflictive. This study was designed to study the influence of the KIFP forest management policies on the Nso indigenous forest Management system in Ngongbaa Forest, and its implications. The data collected for the study was secured through the administration of a questionnaire to residents of 10 villages adjacent to the Ngongbaa Forest, and forest users who carried out livelihood activities there between 1963 and 2015. These forest user groups include beekeepers, rat trappers, grazers, mushroom gatherers, ground honey/tree honey harvesters, carvers, etc. The investigation also extended to the traditional leaders of Nso and Oku who are in charge of the land tenure systems. The findings show that the Oku Mountain Forest is jointly owned by the Nso and Oku people. The Nso own the eastern half of the forest known as Ngongbaa Forest while the Oku own the western half, known as the Kilum Forest. The cordial relationship that existed between these people ensured the conservation of the forest. But the conflicts that later set in, especially due to the creation of the Kilum Mountain Forest Project in 1987 later changed to the Kilum Ijim Forest Project (KIFP) in 1992 sidelined the local communities which was contrary to the dispositions of the new Cameroon forest law enacted in 1994. Thus, the indigenous conservation practices became ignored which the local population never digested well. This seriously jeopardized the wellbeing of the forest in general.

Rare-Element Pegmatites Rocks Rich and Li of the Aïr Massif of the Tchirozerine: Mineralogy and Chemical Composition Agadez Region-Northem Niger

The lithium potential in the Aïr massif is represented by mineral index of spodumene pegmatites and, lepidolite pegmatites. The mineral deposits of lithium occur in cluster or veins that cut the host rock or are located near the contact between the greenstone belt and granitic massif. The evidence of lithium is in the form of clusters or disseminated and stockwerk. Mineralogical characteristics show similarities between the Air Massif pegmatites and indicate the same homogenous source during the magma-generation process. The pegmatite rocks attracted the attention due to their wide exposure and composition, well appearance, and economically hosting of significant rare earth metals such as Sn and W. The mineralogical and petrographical investigations on the eight pegmatites rocks samples observed have a relative similarity, while a little difference in the shapes attributed to the ratio in the pegmatite rocks of the minerals. The occurrence of the kink band indicates the influence of the tectonic processes which affected the Aïr massif after the emplacement of late magmatic or post-magmatic pegmatites by injection into fractured rocks in the upper part of the crust. The Air Massif pegmatite has higher concentrations Li and of all trace elements except Hf and occasionally Zr, Ti, Sn and Mg of for the economic exploration.

Structural Controls and Predictive Mapping of Tin, Niobium and Tantalum Mineralization Associated with the Mayo Darlé Stanniferous Granitoids;Contributions of Geostatistics

The aim of this study of the spatial dispersion of tin, niobium and tantalum mineralization associated with the Mayo Darlé granitoids was to produce prospecting guides through predictive maps of Sn, Nb and Ta in the region. It was based on a database (in appendix) obtained after analysis of rock samples (greisens and quartz veins) collected in the field, using a portable X-ray fluorescence (XRF) spectrometer. Two approaches were used: 1) structural studies in the field using the directions of veins and fractures 2) the use of variographic maps, an essential element in geostatistics for determining directional anisotropies. A joint synthesis of the modelling results shows that tin, tantalum and niobium mineralization at Mayo Darlé is concentrated along strike intervals N315E to N320E, with mineralization also occurring along strike N35E for high-grade Sn, medium-grade Ta and low-grade Nb. In short, mineral concentrations disperse progressively in space: positively from east to west for tantalum and niobium, and inversely for tin.

Characterization of Sediment from Ourokessoum, North Cameroon: Morphostructural, Mineralogical, and Physicochemical Properties

The present study examines the morphological, physicochemical, and mineralogical specificity of clay sediments in the Hamakoussou Basin with the objective of exploring their potential applications. Field data collection was followed by a series of physicochemical and mineralogical tests on the clay samples. Results show that the clay layers, which range in thickness from 11 - 120 cm, exhibit gray, yellowish, or greenish colors. From a physicochemical perspective, these clay layers are found to be basic with a pH ranging from 8.5 for the higher Hama2 layer to 7.6 for the lower Hama1 layer. The sum of exchangeable bases (S) is medium to high with higher values in the Hama1 layer (53.45 meq/100g) and lower values in the Hama3 layer (17.09 meq/100g). Similarly, the cation exchange capacity (CEC) varies from 62.32 meq/100g for the higher Hama1N4 clay layer to 35.6 meq/100g for the lower Hama1N3 clay layer. Mineralogically, the clay materials are primarily composed of smectites, with illite, kaolinite, calcite, quartz, feldspar, hematite, and goethite also present. This study emphasizes the versatility of clay in various industries and scientific domains. It is known for its impermeability, plasticity, and fossil-preserving capabilities, making it a valuable material for economic, practical, and academic applications.

Compression failure conditions of concrete-granite combined body with different roughness interface

Bedrock and concrete lining are typical composite structures in the engineering field and the stability of the geological body and engineering body is directly connected to the mechanical properties of the composite body.Under this background,the study provides the transverse isotropic equivalent model of concrete-granite double-layer composite based on the notion of strain energy equivalence.Assuming that the strength failure of concrete and granite meets the Mohr-Coulomb criterion,then the strength failure model of the combined body considering the joint roughness coefficient(JRC)is derived,and the influences of JRC,the height ratio of concrete to granite,and confining pressure on the strength failure characteristics of the combined body are emphatically analyzed.Finally,the model applicability is illustrated by the uniaxial and triaxial compression tests on concrete monomer,granite monomer and concretegranite composite samples(CGCSs)with different JRCs.The results revealed that the compressive strength of the composite is closer to the concrete with lower strength in the combined body under different confining pressures.Adding interface roughness causes to raise the compressive strength of the composite due to interfacial adhesion between concrete and granite,and a slowing growth trend is observed in compressive strength as roughness.The model can provide a certain reference for the stability design and evaluation of engineering rock mass.

Integrated gravity and magnetic study on patterns of petroleum basin occurrence in the China seas and adjacent areas

The China seas and adjacent areas contain numerous petroleum basins.One of the main challenges for future oil and gas exploration is to identify the inherent patterns of petroleum basin distribution.The formation and evolution of petroleum basins along with the migration and accumulation of oil and gas are often closely related to the tectonic environment.The gravity and magnetic fields with high lateral resolution and wide coverage provide important data for regional tectonic research.Based on the gravity data in the Global Satellite Gravity Anomaly Database(V31.1)and magnetic data from the Earth Magnetic Anomaly Grid(2-arc-minute resolution)(V2),this study uses integrated gravity and magnetic field technique to obtain integrated gravity and magnetic field result for the China seas and adjacent areas,and then adopts the normalized vertical derivative of the total horizontal derivative technique to conduct partition.Finally,it identifies the relationship between the partition characteristics and tectonics as well as the patterns of petroleum basin occurrence.The research shows that the partition of gravity and magnetic field integrated result has a good correlation with the Neo-Cathaysian tectonic system and tectonic units.The petroleum basins are characterized according to three blocks arranged from north to south and four zones arranged from east to west.The north-south block structure causes the uneven distribution of oil and gas resources in the mainland area and the differences in the hydrocarbon-bearing strata.Petroleum basins are more abundant in the north than in the south.The ages of the main oil-and gas-bearing strata are“Paleozoic–Mesozoic,Paleozoic–Mesozoic–Cenozoic,and Paleozoic–Mesozoic”,in order from north to south.The difference in the overall type of oil and gas resources in all basins is controlled by the east–west zonation.From east to west,the oil and gas resource type exhibits a wave-like pattern of“oil and gas,gas,oil and gas,gas”.The vertical distribution is characterized by an upper oil(Mesozoic–Cenozoic)and lower gas(Mesozoic–Paleozoic)structure.Within the study area,the Paleozoic marine strata should be the main strata of future natural gas exploration.

Study on the distribution characteristics of faults and their control over petroliferous basins in the China seas and its adjacent areas

As one of the main controlling factors of oil and gas accumulation,faults are closely related to the distribution of oil and gas reservoirs.Studying how faults control petroliferous basins is particularly important.In this work,we investigated the plane positions of major faults in the China seas and its adjacent areas using the normalized vertical derivative of the total horizontal derivative(NVDR-THDR)of the Bouguer gravity anomaly,the fusion results of gravity and magnetic anomalies,and the residual Bouguer gravity anomaly.The apparent depths of major faults in the China seas and its adjacent areas were inverted using the Tilt-Euler method based on the Bouguer gravity anomaly.The results show that the strikes of the faults in the China seas and its adjacent areas are mainly NE and NW,followed by EW,and near-SN.Among them,the lengths of most ultra-crustal faults are in the range of 1000–3000 km,and their apparent depths lie between 10 km and 40 km.The lengths of crustal faults lie between 300 km and 1000 km,and their apparent depths are between 0 km and 20 km.According to the plane positions and apparent depths of the faults,we put forward the concept of fault influence factor for the first time.Based on this factor,the key areas for oil and gas exploration were found as follows:the east of South North China Basin in the intracontinental rift basins;the southeast region of East China Sea Shelf Basin,the Taixinan and Qiongdongnan basins in the continental margin rift basins;Zhongjiannan Basin in the strike-slip pull-apart basins;the Liyue,Beikang,and the Nanweixi basins in the rifted continental basins.This work provides valuable insights into oil and gas exploration,mineral resource exploration,and deep geological structure research in the China seas and its adjacent areas.

Influence of the Moho surface distribution on the oil and gas basins in China seas and adjacent areas

Owing to the strategic significance of national oil and gas resources,their exploration and production must be prioritized in China.Oil and gas resources are closely related to deep crustal structures,and Moho characteristics influence oil and gas distribution.Therefore,it is important to study the relationship between the variation of the Moho surface depth undulation and hydrocarbon basins for the future prediction of their locations.The Moho depth in the study area can be inverted using the Moho depth control information,the Moho gravity anomaly,and the variable density distribution calculated by the infinite plate.Based on these results,the influences of Moho characteristics on petroleum basins were studied.We found that the Moho surface depth undulation deviation and crustal thickness undulation deviation in the hydrocarbon-rich basins are large,and the horizontal gradient deviation of the Moho surface shows a positive linear relationship with oil and gas resources in the basin.The oil-bearing mechanism of the Moho basin is further discussed herein.The Moho uplift area and the slope zone correspond to the distribution of oil and gas fields.The tensile stress produced by the Moho uplift can form tensile fractures or cause tensile fractures on the surface,further developing into a fault or depression basin that receives deposits.The organic matter can become oil and natural gas under suitable chemical and structural conditions.Under the action of groundwater or other dynamic forces,oil and natural gas are gradually transported to the uplift or the buried hill in the depression zone,and oil and gas fields are formed under the condition of good caprock.The research results can provide new insights into the relationship between deep structures and oil and gas basins as well as assist in the strategic planning of oil and gas exploration activities.

Intelligent identification of landslides in loess areas based on the improved YOLO algorithm:a case study of loess landslides in Baoji City

Loess landslides are one of the geological hazards prevalent in mountainous areas of Loess Plateau,seriously threatening people's lives and property safety.Accurate identification of landslides is a prerequisite for reducing the risk of landslide hazards.Traditional landslide interpretation methods often have the disadvantage of being laborious and difficult to use on a large scale compared with the recently developed deep learning-based landslide detection methods.In this study,we propose an improved deep learning model,landslide detectionyou only look once(LD-YOLO),based on the existing you only look once(YOLO)model for the intelligent identification of old and new landslides in loess areas.Specifically,remote sensing images of landslides in Baoji City,Shaanxi Province,China are acquired from the Google Earth Engine platform.The landslide images of Baoji City(excluding Qianyang County)are used to establish a loess landslide dataset for training the model.The landslide data of Qianyang County is used to verify the detection performance of the model.The focal and efficient IoU(Focal-EIoU)loss function and efficient channel attention(ECA)mechanism are incorporated into the 7th version of YOLO(YOLOv7)model to construct the LD-YOLO model,which makes it more suitable for the landslide detection task.The experiments yielded an improved LD-YOLO model with average precision of 92.05%,precision of 92.31%,recall of 90.28%,and F1-score of 91.28%for loess landslide detection.The landslides in Qianyang County were divided into two test sets,new landslides and old landslides,which were used to test the detection performance of LD-YOLO for both types of landslides.The results show that LD-YOLO detects old landslides with a detection precision of 82.75%and a recall of 80%.When detecting new landslides,the detection precision is 94.29%and the recall is 91.67%.It indicates that our proposed LD-YOLO model has strong detection performance for both new and old landslides in loess areas.Through a proposed solution that can realize the accurate detection of landslides in loess areas,this paper provides a valuable reference for the application of deep learning methods in landslide identification.