Hydrogen Production with High Evolution Rate and High Yield by Immobilized Cells of Hydrogen-producing Bacteria Strain B49 in a Column Reactor

To improve the hydrogen evolution rate in continuous hydrogen production of a novel fermentative hydrogen producing bacteria strain B49 (AF481148 in EMBL), 4 % immobilized cells by polyvinyl alcohol boric acid method, with the addition of a small amount of calcium alginate in a column reactor obtain hydrogen yield of 2.31 mol H2/mol glucose and hydrogen evolution rate of 1435.4 ml/L culture·h respectively at medium retention time of 2.0 h with a medium containing 10g glucose/L. Moreover, as the cell density in gel beads is increased to 8%, hydrogen yield and hydrogen evolution rate for 10g glucose/L are 2.34 mol H2/mol glucose and 2912.4 ml/L culture·h respectively at medium retention time of 1.0 h, and for molasses wastewater COD of 7505.9 mg/L hydrogen production potential of 205.6 ml/g COD and hydrogen evolution rate of 2057.7 ml/L culture·h at hydraulic retention time of 0.75 h are observed. In the continuous culture pH value keeps around 3.9 by self regulating.

Partial Characteristics of Hydrogen Production by Fermentative Hydrogen-producing Bacterial Strain B49

To investigate the characteristics of hydrogen production by a novel fermentative hydrogen-producing bacterial strain B49 (AF481148 in EMBL), batch experiments are conducted under different conditions. Hydrogen production has a correlation with cell growth and the consumption of glucose and soluble protein. The optimum pH for cell growth is 4.5±0.15. At acidic pH 4.0±0.15, the bacteria has the maximum accumulated hydrogen volume of 2382 ml/L culture and the maximum hydrogen evolution rate of 339.9 ml/L culture·h with 1% glucose. The optimum temperature for cell growth and hydrogen production is 35℃. In addition, fermentative hydrogen-producing bacterial strain B49 can generate hydrogen from the decomposition of other organic substrates such as wheat, soybean, corn, and potato. Moreover, it can also produce hydrogen from molasses wastewater and brewage wastewater, and hydrogen yields are 137.9 ml H 2/g COD and 49.9 ml H 2/g COD, respectively.

Numerical Simulation and Analysis of Migration Law of Gas Mixture Using Carbon Dioxide as Cushion Gas in Underground Gas Storage Reservoir

One of the major technical challenges in using carbon dioxide( CO2) as part of the cushion gas of the underground gas storage reservoir( UGSR) is the mixture of CO2and natural gas. To decrease the mixing extent and manage the migration of the mixed zone,an understanding of the mechanism of CO2and natural gas mixing and the diffusion of the mixed gas in aquifer is necessary. In this paper,a numerical model based on the three dimensional gas-water two-phase flow theory and gas diffusion theory is developed to understand this mechanism. This model is validated by the actual operational data in Dazhangtuo UGSR in Tianjin City,China.Using the validated model,the mixed characteristic of CO2and natural gas and the migration mechanism of the mixed zone in an underground porous reservoir is further studied. Particularly,the impacts of the following factors on the migration mechanism are studied: the ratio of CO2injection,the reservoir porosity and the initial operating pressure. Based on the results,the optimal CO2injection ratio and an optimal control strategy to manage the migration of the mixed zone are obtained. These results provide technical guides for using CO2as cushion gas for UGSR in real projects.

Impact of Untreated Sedimentation Tank Sludge Water Recycle on Water Quality During Treatment of Low Turbidity Water

The overall purpose of this research is to examine the impact of untreated sedimentation tank sludge water( USTSW) recycle on water quality during treatment of low turbidity water in coagulation—sedimentation processes. 950 m L of raw water and different concentrations of 50 m L USTSW are injected into six 1 000 m L beakers without coagulant.The results indicate that USTSW characterized as accumulated suspended solids and organic matter has active ingredients,which possess the equivalent function of coagulant. The optimal blended water turbidity is in the range of 10-20 NTU,within which USTSW recycle achieves the highest save coagulant rate. The mechanism of strengthening coagulation effect when USTSW recycle mainly depends on the chemical effect and physical effect. What is more,through scanning electron microscopy( SEM),it is found that the floc structures with USTSW recycle are more compact than those without USTSW recycle. Besides,the water quality parameters of color,NH3-N,CODMn,UV254,total aluminum,total manganese when USTSW recycle is better than the raw water without recycle,indicating that USTSW recycle can improve water quality with strengthening coagulation effect.

Optimization of the operating conditions in a TiO_2/Fe_3O_4-SiO_2 photocatalytic reactor for the treatment of industrial wastewater containing Procion Red MX-5B

According to the design principle of the central composite experimental,the method of response surface analysis with three factors and three levels was adopted based on one factor test.A second-order quadratic equation for photocatalysis of Procion Red MX-5B was built.Response surface and contour were graphed with the decoloration rate of Procion Red MX-5B as the response value.Based on the analysis of the response surface plots and their corresponding contour plots,effects of pH value,irradiation time and catalyst loading were explored.By using this new method,the optimum decoloration condition was obtained as follows:pH value,1.3;irradiation time,49.9 min;catalyst loading,0.57 g/L.In the optimization,R-Squared and Adj R-Squared correlation coefficients for quadratic model were evaluated quite satisfactorily as 0.9310 and 0.8620,respectively.Under the optimum conditions established,the performance of 99.47% for color removal was experimentally reached.It was found that all factors considered have an important effect on the decolorization efficiency of Procion Red MX-5B.By the ANOVA analysis and model confirmation the optimal solution obtained using RSM was experimentally validated and credible with preferable instructional ability for experiments.

LARGE EDDY SIMULATION AND SPECTRUM ANALYSIS OF FLOW AROUND TWO SQUARE CYLINDERS ARRANGED SIDE BY SIDE

Large eddy simulation cooperated with the second order full extension ETG(Euler-Taylor-Galerkin) finite element method was applied to simulate the flow around two square cylinders arranged side by side at a spacing ratio of (1.5.) The second order full extension ETG finite element method was developed by Wang and He. By means of Taylor expansion of terms containing time derivative, time derivative is replaced by space derivative. The function of it is equal to introducing an artificial viscosity term. The streamlines of the flow at different moments were obtained. The time history of drag coefficient, lift coefficient and the streamwise velocity on the symmetrical points were presented. Furthermore, the symmetrical problem of the frequency spectrum of flow around two square cylinders arranged side by side were studied by using the spectral analysis technology. The data obtained at the initial stage are excluded in order to avoid the influence of initial condition on the results. The power spectrums of drag coefficient, lift coefficient, the streamwise velocity on the symmetrical points were analyzed respectively. The results show that although the time domain process of dynamic parameters is non-symmetrical, the frequency domain process of them is symmetrical under the symmetrical boundary conditions.

Numerical simulation and experimental verification of solar seasonal soil thermal storage

To analyze the characteristics of solar seasonal soil thermal storage in a solar-ground coupled heat pump system (SGCHPS) in severe cold area,the software FLUENT was used to establish the three-dimensional unsteady state fluid-solid coupling mathematical model of multi-well ground heat exchanger (MWGHE).The User-Defined Functions (UDF) of solar collector and plate heat exchanger were written and dynamically loaded into the model of MWGHE as the boundary conditions.In this way,the dynamic simulation of solar seasonal soil thermal storage was realized.The comparison of simulative and experimental results showed that the overall variation trend of simulative and experimental values achieves a good agreement with time;the relative errors of simulated parameters are all in the allowable range.Therefore,it can be obtained that the models established can be applied in the investigation of performance of solar seasonal soil thermal storage.At the same time,it provides a theoretical basis for the study of heating in SGCHPS and soil heat balance analysis after long-time thermal storage and extraction.

Design on rural eco-house in cold areas of Northern China

Many kinds of factors that influence rural housing construction in Northern China are analyzed systematically and the connections between them are weighed from ecology and sustainable angles, so that an optimized green house can be built. At the same time, the energy efficient envelope structure and the method of choosing insulation material in the cost of unit thermal resistance are proposed. Integrated quality evaluation by computer shows that thermal comfort in the house would be improved remarkably for the value of PPD drops from 35%-40% to 15%, the rate of saving energy is 51.73%, much higher than the third goal of saving energy in China, and the comprehensive ecological benefit achieves good effect so as to promote the sustainable development of rural housing and community in cold areas of Northern China.

A visualization fatigue analysis of a pipeline joint in a special medium environment

In this paper,authors have discussed predominately unidirectional Fluid Structure Interaction,i. e. a given field in which a high speed/pressure and high temperature thermal flow affect the interface between pipelines joints. Surface forces at the fluid-structure interface allow designers to investigate the effects of fluid flow on the structural deformation and stresses. Possible failure modes have been compared with different loads from steady thermal flow analysis results. CFD code SC/Tetra and FEA code ANSYS are used in this study. These studies can be used in protecting certain fatigue failures for pipeline joints under critical cyclic load conditions from both thermal expansion and hydraulic pressure in municipal and environmental engineering applications as well as oil and gas fields.

Study on limited-flux coefficient to achieve spare transportation of heat-supply network

Limited-heating is one of the heating statuses which can meet the reliability requirement of those uninterrupted heat-users under the accidental status of heat-supply network.It requires the network to be provided with both ability of spare-structure and spare-transportation,and the later one is depended on the limited-flux coefficient.This paper investigates the relationship between the limited-flux coefficient and limited-heating coefficient of indirect connection system.The optimal value of the limited-flux coefficient is presented as well.

Spatio-temporal succession of iron and manganese microbial community in biological filter layer

This paper studied the structure and dynamic change of microbial communities in bio-reactor for treating ground water which contained high concentration of iron and manganese.In this study,polymerase chain reaction(PCR) denaturing gradient gel electrophoresis(DGGE) was used to evaluate the bacterial diversity.Different samples in spatio-temporal of bacterial community suceession in sands were analyzed,and the removal of iron and manganese were discussed.The results showed that a significant change in the community structure was observed during running time and the bio-reactor which designed by ourselves:the removal rate of iron and manganese could achieve 88.93%.The mass of microrganisms was decreasing,and the type of micro-organisms tended to stable with the increase of operating time.Besides,the change of mass and types of micro-organisms in sands was related to temperature.Along the depth of filter layer,the mass and types of micro-organisms were gradually decreasing.Further,pseudomonas were found to be the main microbiology by recycling the band sequencing and phylogenetic analysis.And with time increasing the mass and kind of bacteria were growing from less to more,finally to be stable.

Analysis of Circumstance Influence Factors on HMBR for Waste-water Reclamation in Dwelling District

Circumstance influence factors on Hybrid Membrane Bio-Reactor (HMBR) process for the wastewater reclamation in dwelling district was analyzed. The main characteristic of this process is that sludge and nitrified effluent can be recycled automatically, which simplifies the operation of system and is beneficial to get the high removal of organics and nitrogen. Based on the analysis of circumstance influence factors, it is recommended that water temperature of about 20°, influent pH of 6 ～7 and DO of 1.0 mg/L - 1. 5 mg/L in the aerobic compartment. Under these conditions, COD, BODs,NH+4-N, and TN were removed effectively in HMBR and the average removal efficiencies were 94.5%,99.3%, 99.4% and 84.7%, respectively. SS and coliforms were both below the detection limits in the permeate of UF membrane module, and turbidity was less than 1NTU.The treated effluent meets the Miscellaneous Domestic Water Quality Standard (CJ25.1 - 89), and can be reused multipurposely such as watering of green belts, cleaning and toilet flushing water after disinfection.

Experimental Study on Minimization of Sludge Production by Ozonation Process

Based on the hypothesis of reducing sludge production under cryptic growth conditions, ozone was used as cell lysis agent to treat excess sludge,and then the ozonated supernatant was returned to the aeration tank. The results show that COD and NH+4-N removal efficiencies in ozonation process were 87.96% and 84.42%, respectively. Meanwhile, a low excess sludge yield coefficient of 0. 113 ( g SS/g COD removed) was obtained. Compared with that of the control test, the process configuration decreased the excess sludge production by 51.3%.

Oxidative Treatment of Some Reactive Dyes by Fenton Reagent

Nine kinds of reactive dye solutions: Reactive K-2RL, H-E2R, X-6B1Y, HE-4G, X-3B, K-2R,H-E7B, X-4RN and S-F3B were treated by using Fenton reagent. While the concentration of dye is 400mg/L, the FeSO4 dosage 100～180 mg/L, H2O2240～S40 mg/L, that is the stoichiometric numbers of Fe2+and H2O2 are between 1:9～1:12, pH=3, reaction time l h, temperature 25℃, the colority removal efficiency reach more than 95%, the COD removal efficiency 65%～8S%, and the TOC removal efficiency 70.2%. By comparing UV-VIS absorption spectrum before and after treatment, it further shows that decomposition effect of Fenton reagent on these nine kinds of reactive dyes is satisfactory.

Bench and Full Scale Study of Removal Effect and Mutagenicity on Mesocyclops Leukarti with Chlorine Dioxide

Mesocyclops Leukarti of zooplankton propagates excessively in eutrophic water body and it can not be effectively inactivated by the conventional process in drinking waterworks for its special surface structure. In this paper, a study of removal efficiency on Mesocyclops Leukarti with chlorine dioxide in a drinking waterworks was performed. Bench scale results showed that chlorine dioxide is more effective against Mesocyclops Leukarti. And Mesocyclops Leukarti could be effectively removed from water by 1.0 mg/L chlorine dioxide preoxidation cooperated with the conventional process during the full scale study. The chlorite, by-product of prechlorine dioxide, was constant at 0.45 mg/L after filtration, which was lower than the critical value of the USEPA. GC-MS examination and Ames test showed that the quantity of organics and the mutagenicity in the water treated by chlorine dioxide is obviously less than that of prechlorination.

Inactivation of Giardia by Ozone and Its Disinfect Mechanisms

This study was to investigate the effect of ozone(O3)inactivation on Giardia in water by the fluorescence staining method.In order to elucidate the dominant mechanisms of inactivation,cell surface or inner cell components damage were comparatively examined by scanning electron microscopy(SEM).Results suggested that O3had a stronger effect on inactivating capability.Firstly,when the concentration of O3was above 2.0 mg/L and the contact time was up to 5 min,it showed a significant inactivating effect.Secondly,the effect of turbidity on inactivation was also found to be significant in synthetic water;when turbidity increased,the inactivating effect decreased.Thirdly,the inactivating rates were improved with a temperature increase from 5 to 25℃,but decreased when the temperature were out of this range.The inactivating capability of O3was stronger under acidic conditions than alkalic conditions.Lastly,when the concentration of organic matter in the reactive system was increased,probably due to the competition between Giardia and organics on O3,the inactivating rate was decreased;in addition,the cellular morphology of Giardia varied with different contact times.At contact time of 30 s,cells were rotundity and sphericity;at 60 s they became folded,underwent emboly,and burst;and at 240 s,the cell membrane of Giardia shrinked and collapsed completely.

Hydrogen energy recovery from high strength organic wastewater with ethanol type fermentation using acidogenic EGSB reactor

A lab-scale expanded granular sludge bed （EGSB） reactor was employed to evaluate the feasibility of the hydrogen energy recovery potential from high strength organic wastewater. The results showed that a maximum hydrogen production rate of 7.43 m3 H2/m3 reactor·d and an average hydrogen production rate of 6.44 m3 H2/m3 reactor·d were achieved with the hydrogen content of 50%～56% in the biogas during the 90-day operation. At the acidogenic phase, COD removal rate was stable at about 15%. In the steady operation period, the main liquid end products were ethanol and acetic acid, which represented ethanol type fermentation. Among the liquid end products, the concentration percentage of ethanol and acetic acid amounted to 69.5%～89.8% and the concentration percentage of ethanol took prominent about 51.7%～59.1%, which is better than the utilization of substrate for the methanogenic bacteria. An ethanol type fermentation pathway was suggested in the operation of enlarged industrial continuous hydrogen bio-producing reactors.

Bromate removal by activated carbon adsorption:material selection and impact factors study

Studies are conducted by using activated carbon process aimed at bromate removal from the raw water.Screening of activated carbon for bromate removal was performed in different activated carbons.GAC Merck possesses the highest iodine number and surface area,the highest number of basic groups and Vmeso,thereby contains the highest adsorption velocity and adsorption capacity.Impact factors of bromate removal on activated carbon were studied.Through static absorption experiments we studied the effect of adsorption time,pH,temperature,anions and organic matter on bromate removal.With the decrease of pH,removal of bromate enhanced,suggests that it may be possible to increase bromate reduction through pH control.The increase of temperature will be favorable to adsorption of bromate on activated carbon.Anions and organic matter can inhibit the adsorption of bromate on activated carbon through competing active sites.Bromate removal can be improved by controlling key water quality parameters.

Organic matter extracted from activated sludge with ammonium hydroxide and its characterization

In order to characterize the organic properties of waste activated sludge in a wastewater treatment plant,organic matter within sludge was extracted with NH 3 ·H 2 O preferentially,and subsequently fractionated into five fractions using XAD-8/XAD-4 resins.Up to a 63.8%-71.1% of organic matter within the sludge could be efficiently extracted by NH 3 ·H 2 O.Fractionation results showed that hydrophobic acid and hydrophilic fraction were two main components among the sludge organic matter （accounting for 32.2% and 48.0% of the bulk organic matter,respectively）,whereas transphilic acid,hydrophobic neutral and transphilic neutral were quite low （accounting for 9.2%,5.8% and 4.8%,respectively）.Despite that the extractant of NH 3 ·H 2 O showed a relatively higher extraction efficiency of the aromatic components,the relatively low aromaticity of the organic fractions implied that those non-aromatic components could also be effectively extracted,especially for neutral and hydrophilic fractions.In addition,acidic fractions contained more aromatic humic-like components,whereas the neutral fractions had a greater content of aromatic proteins and soluble microbial byproduct-like components.Extraction of sludge organics with NH3·H2O and subsequential fractionation using XAD resins could be a novel method for further characterization of sludge organics.

Enhanced Biological Phosphorus Removal in Anaerobic/Aerobic Sequencing Batch Reactor Supplied with Glucose as Carbon Source

Phosphorus removal performance in an aerobic/aerobic sequencing batch reactor (SBR) supplied with glucose as carbon source was investigated. It was found that there was no phosphate release concomitant with the storing of poly-β-hydroxyalkanoate (PHA) during the anaerobic phase. Whereas, glycogen was soon built up followed by rapid consumption, at the same time, glucose was depleted rapidly. Based on the analysis of different fractions of phosphorus in activated sludge, the relative ratio of organically bound phosphorus in sludge changed at the end of anaerobic and aerobic phases. The ratios were 45.3% and 51.8% respectively. This showed that the polyphosphate broke down during the anaerobic phase to supply part of energy for PHA synthesis. The reason why there was no phosphate release might be the biosorption effect of extracellular exopolymers (EPS). It was also proved by the analysis of EPS with scanning electron microscopy (SEM) combined with energy dispersive spectrometry (EDS). The phosphorus weight percentage of EPS at the end of anaerobic phase was 9.22%.