Characteristics of water inflow and chemical grouting treatment of a Liu Yuanzi Coal Mine shaft in the Ordos Basin

During shaft constructing, a borehole water inflow of 30 m3/h was encountered in Liu Yuanzi Coal Mine in the southwestern Ordos Basin, whose aquifer is mainly cretaceous. On the basis of regional hydrogeological conditions, a mercury intrusion method and scanning electron microscope were used in this study. We conclude that the loose, porous and easily collapsible clay particles of the cretaceous aquifer rock mass were the major geological cause for water hazards during the construction of the shaft. We propose an approach of chemical grouting from the working surface and in the end succeeded in blocking the water.

Parameter identification and global sensitivity analysis of Xin'anjiang model using meta-modeling approach

Parameter identification, model calibration, and uncertainty quantification are important steps in the model-building process, and are necessary for obtaining credible results and valuable information. Sensitivity analysis of hydrological model is a key step in model uncertainty quantification, which can identify the dominant parameters, reduce the model calibration uncertainty, and enhance the model optimization efficiency. There are, however, some shortcomings in classical approaches, including the long duration of time and high computation cost required to quantitatively assess the sensitivity of a multiple-parameter hydrological model. For this reason, a two-step statistical evaluation framework using global techniques is presented. It is based on （1） a screening method （Morris） for qualitative ranking of parameters, and （2） a variance-based method integrated with a meta-model for quantitative sensitivity analysis, i.e., the Sobol method integrated with the response surface model （RSMSobol）. First, the Morris screening method was used to qualitatively identify the parameters＇ sensitivity, and then ten parameters were selected to quantify the sensitivity indices. Subsequently, the RSMSobol method was used to quantify the sensitivity, i.e., the first-order and total sensitivity indices based on the response surface model （RSM） were calculated. The RSMSobol method can not only quantify the sensitivity, but also reduce the computational cost, with good accuracy compared to the classical approaches. This approach will be effective and reliable in the global sensitivity analysis of a complex large-scale distributed hydrological model.

Forward Modeling of the Relationship Between Reflection Coefficient and Incident Angle of the P Wave in a Coal Seam

Although the Zoeppritz equation is suitable for a single interface in a thick deposit, it has some limitations for composite reflection waves from both the floor and the roof of coal seams. Based on the ray model, the relationship of the overall reflection coefficient of composite reflection P waves, from coal seam versus incidence angle (AVO), is dis- cussed. The result shows that: 1) the overall reflection coefficient of composite reflection waves from coal seams is a negative value and is determined mainly by the lithology of roof and floor, which is different from the reflection coeffi- cient of a single interface; 2) if the incidence angle ranges from 0° to 6°, the reflection coefficient of composite waves of a coal seam does not change with the incidence angle and 3) if the incidence angle ranges from 6–60° , the reflection coefficient increases monotonically.

Failure modes of coal containing gas and mechanism of gas outbursts

In order to explain the mechanism for gas outburst, the process of evolving fractures in coal seams is described using system dynamics with variable boundaries. We discuss the failure modes of coal containing gas and then established the flow rules after failure. The condition under which states of deformation convert is presented and the manner in which these convert is proposed. In the end, the process of gas outbursts is explained in detail. It shows that a gas outburst is a process in which the boundaries of coal seams are variable because of coal failure. If the fractures are not connected or even closed owing to coal/rock stress, fractured zones will retain a certain level of carrying capacity because of the self-sealing gas pressure. When the accumulation of gas energy reaches its limit, coal seams will become unstable and gas outbursts take place.

Geochemical and Petrological Studies on the Early Carboniferous Sidingheishan Mafic-Ultramafic Iintrusion in the Southern Margin of the Central Asian Orogenic Belt,NW China

The Sidingheishan mafic-ultramafic intrusion is located in the eastern part of the Northern Tianshan Mountain, along the southern margin of the Central Asian Orogenic Belt in northern Xinjiang autonomous region of China. The Sidingheishan intrusion is mainly composed of wehrlite, olivine websterite, olivine gabbro, gabbro and hornblende gabbro. At least two pulses of magma were involved in the formation of the intrusion. The first pulse of magma produced an olivine-free unit and the second pulse produced an olivine-bearing unit. The magmas intruded the Devonian granites and granodiorites.An age of 351.4±5.8 Ma(Early Carboniferous) for the Sidingheishan intrusion has been determined by U-Pb SHRIMP analysis of zircon grains separated from the olivine gabbro unit. A U-Pb age of 359.2±6.4 Ma from the gabbro unit has been obtained by LA-ICP-MS. Olivine of the Sidingheishan intrusion reaches 82.52 mole% Fo and 1414 ppm Ni. On the basis of olivine-liquid equilibria, it has been calculated that the MgO and FeO included in the parental magma of a wehrlite sample were approximately10.43 wt% and 13.14 wt%, respectively. The Sidingheishan intrusive rocks are characterized by moderate enrichments in Th and Sm, slight enrichments in light REE, and depletions in Nb, Ta, Zr and Hf. The εNd(t) values in the rock units vary from +6.70 to +9.64, and initial87Sr/86Sr ratios range between 0.7035 and0.7042. Initial206Pb/204Pb,207Pb/204Pb and208Pb/204Pb values fall in the ranges of 17.23-17.91,15.45-15.54 and 37.54-38.09 respectively. These characteristics are collectively similar to the Heishan intrusion and the Early Carboniferous subduction related volcanic rocks in the Santanghu Basin, North Tianshan and Beishan area. The low(La/Gd)PMvalues between 0.26 and 1.77 indicate that the magma of the Sidingheishan intrusion was most likely derived from a depleted spinel-peridotite mantle.(Th/Nb)PMratios from 0.59 to 20.25 indicate contamination of the parental magma in the upper crust.Crystallization modeling methods suggest that the parental magma of the Sidingheishan intrusion was generated by flush melting of the asthenosphere and subsequently there was about 10 vol%contamination from a granitic melt. This was followed by about 5 vol% assimilation of upper crustal rocks. Thus, the high-Mg basaltic parental magma of Sidingheishan intrusion is interpreted to have formed from partial melting of the asthenosphere during the break-off of a subducted slab.

Evolution of a hydrodynamic field and its effect on hydrocarbon accumulation in the Biyang depression, Henan province

The hydro-geologic stages in the Biyang Depression, Henan Province, were defined and factors controlling the evolution of the hydrodynamic field in this area were analyzed. The evolution of the paleo-hydrodynamic field was studied by using the method of sedimentary-water-head and the changing patterns of the present hydrodynamic field as determined from measured pressure data. The results show that the evolution of the hydrodynamic field is one of inheritance and that it controls hydrocarbon accumulation. The deposition center in the southeast of the depression is always a high-value zone for water-head and a dynamic- source zone of the hydrodynamic field. The slope zone in the northwest of the depression is always a low-value zone for water-head and is the main discharge area for groundwater; this is the hydrocarbon accumulation zone. Hydrocarbon accumulation is controlled by the hydrodynamic field. The reservoir shows a ring-shaped horizontal pattern. Accumulation occurs in a pressure equilibrium zone at the frontal surface between sedimentary water and infiltrating water. The hydrocarbon accumulations occur in two vertically different discharge units, Eh31 and Eh32, under the action of overpressure.

Geoelectric response of porous media in water and grout injection processes

Significant changes in spontaneous potential and exciting currents are observed during water and grout injection in a simulated porous media. Obvious correlations between the seepage flow field and the electric field in the porous media are identified.In this work, a detailed experimental study of geoelectric field variation occurring in water migration was reported by analyzing water and grout injection processes in a simulated porous media. The spontaneous potential varies linearly with the thickness of unsaturated porous media. Very interestingly, the spontaneous potential generated in the second grout injection exhibits some"memory" of previous grouting paths. The decreases in spontaneous potential observed during grout injection is very probably due to that the spontaneous potential variations are primarily caused by electro-filtration potential, as indicated by the far larger viscosity of grout compared to that of water. The geoelectric response can be utilized to effectively identify the grouting paths in water-bearing rocks.

SHRIMP Zircon U-Pb Age of the Sidingheishan Mafic-Ultramafic Intrusion in the Southern Margin of the Central Asian Orogenic Belt,NW China and its Petrogenesis implication

Objective The Sidingheishan mafic-ultramafic intrusion is located in the eastern part of the North Tianshan Mountains. This work used zircon U-Pb age data, bulk rock major and trace elements, Sr-Nd-Pb isotope data to assess mantle source characteristics and crustal assimilation of the parental magma of the Sidingheishan intrusion. We have also discussed the tectonic evolution of the southern margin of the Central Asian Orogenic belt in the Late Paleozoic.

Carboniferous tectono-magmatic evolution of the northern Luliang arc: evidence from geochemistry and petrography of Carboniferous volcanic rocks in the northern Luliang Uplift,NW China

The Northern Junggar Basin experienced extensive subduction and a complex tectono-magmatic evolution during the Late Paleozoic,resulting in a heterogeneous distribution of volcanic rocks in the Junggar Basin.In this study,the Carboniferous tectono-magmatic evolution of the northern Luliang arc was described by exploring the petrography and geochemistry of Carboniferous volcanic rocks collected from well Y-2 and outcrop WW' in the northern Luliang Uplift.The distribution,types,and formation ages of these volcanic rocks were characterized and the volcanic sequence in well Y-1 was divided into upper and lower parts according to vertical variations in selected geochemical data.Then the petrogenesis and tectonic settings of different volcanic rocks were evaluated and this was used to infer the tectonomagmatic evolution of the northern Luliang arc during the Carboniferous.The results indicate that:(1) Carboniferous high-K calc-alkali andesite-dacite associations are distributed in the west of the northern Luliang Uplift,and Lower Carboniferous calc-alkali basalt-dacite-rhyolite assemblages are preserved in its east.(2) The intermediateacid volcanic rocks in wells Y-1 and Y-2 were derived from calc-alkali basaltic magma through melting of the juvenile lower crust,and geochemical variations indicate increasing addition of slab melting in a subduction-related arc environment.The bimodal volcanic rocks from outcrop WW' were derived from lithospheric underplating of basaltic magma in an intra-arc extensional setting.(3) The closure of the eastern Keramaili Oceanic basin occurred before the Early Carboniferous,and the tectono-magmatic difference between the east and the west of the northern Luliang Uplift appeared before the Carboniferous period.

Characteristics of the ore forming fluid from the zinc poly-metallic deposit in the Mopan mine area,Guangxi Nandan

Fluid inclusions from samples from the layered and veined mineralized belt in the Mopan mine area were studied using microscopic temperature measurements and laser Raman spectroscopy.Further studies were conducted on the nature and source of the ore forming fluid and on the mechanism of deposit formation.The results show that there are three types of inclusions that occur in both the layered and veined ore body.These are liquid inclusions,CO 2 inclusions with a liquid phase,and NaCl-H 2 O multiphase inclusions.The fluid inclusions in both the layered and veined ore bodies have similar characteristics.The ore forming fluid is strongly reducing,was exposed to low to medium temperatures,salinity,and pressures.The source of this ore forming fluid was a mix of submarine volcanic spring(blow-piping),magmatic hydrothermal jet,and underground water.

Microbial degradation and its influence on components of coalbed gases in Enhong syncline, China

Coalbed gases (CBG) in Enhong syncline are characterized by high concentration of C2+ (C2-5 ), with the highest content of ethane over 30%. However, the concentrations of C2+ are not evenly distributed in the syncline. Based on the analysis of δ13C1 , δ13C2 , δ13C3 , δ13CO2 , δDCH4 of CBG and their origin diagrams in the normal and abnormal areas, this research shows that gases in both areas are thermogenic gases and the reason for the uneven distribution of C2+ is that the microbial degradation action on gases is stronger in the normal area than in the abnormal area. The secondary biologic gases in the normal area are mainly characterized by that the carbon isotopes become obviously lighter in methane and become heavier in ethane, whereas the molecular and isotopic compositions of CO2 change little. These features indicate that the secondary biologic gases are mainly generated by the microbial degradation of C2+ , not generated by the reduction of CO2 . The degradation process is selective to make the residual ethane being enriched in 13C and the generated methane rich in 12C.

Geochronology, geochemistry and geological significance of Early Cretaceous volcanic rocks from Niangniangshan Formation,Ningwu Basin, middle and lower reaches of the Yangtze River

Ningwu Basin is one of the Mesozoic continental volcanic basins in the middle and lower reaches of the Yangtze River.The volcanic rocks of the Longwangshan,dawangshan,Gushan and Niangniangshan formations,as well as the homologous subvolcanic rocks or small intrusions,are developed from old to new in the Ningwu Basin.Zircon U-Pb dating results show the latialite phonolite of Niangniangshan Formation was erupted at 128±1 Ma(i.e.,Early Cretaceous).The latialite phonolite contains moderate SiO2 contents(57.28%-60.96%)with high Na 2O+K 2O contents,belonging to shoshonite series.The samples have high REE contents,and display right-inclined REE distribution pattern.They are characterized by enrichment in some large ion lithophile elements(e.g.,LILEs,Rb,K),and depletion in some high field strength elements(e.g.,HFSEs,Nb,Ta,Ti).All volcanic samples have relatively depleted Nd isotopic compositions(ISr=0.707197--0.707878;εNd(t)=-0.5--0.9),indicating no genetic relationship with the lower crust of Yangtze plate,but a drift trend towards the EMII.The geochemical data suggest that the Early Cretaceous latialite phonolite was derived from the partial melting of an enriched lithospheric mantle metasomatized by subduction-related fluids in an arc-related setting.Based on the temporal and spatial distribution and geochemical variation characteristics of the regional volcanic rocks,it is suggested that the tectonic system within the study area changed from a subduction-related compression to an extensional environment in the early Early Cretaceous,which was caused by the ridge subduction of the Paleo-Pacific Ocean.

Prediction Technology of Buried Water-Bearing Structures in Coal Mines Using Transient Electromagnetic Method

Buried water-conducting and water-bearing structures in front of the driving head may easily lead to water bursts in coal mines. Therefore,it is very important for the safety of production to make an accurate and timely forecast about water bursts. Based on the smoke ring effect of transient electromagnetic fields,the principle of transient electro-magnetic method used in detecting buried water-bearing structures in coal mines in advance,is discussed. Small multi-turn loop configurations used in coal mines are proposed and a field procedure of semicircular sector scanning is presented. The application of this method in one coal mine indicates that the technology has many advantages compared with others. The method is inexpensive,highly accurate and efficient. Suggestions are presented for future solutions to some remaining problems.

An attribute recognition model based on entropy weight for evaluating the quality of groundwater sources

In our study, entropy weight coefficients, based on Shannon entropy, were determined for an attribute recognition model to model the quality of groundwater sources. The model follows the theory previously proposed by Chen Q S. In the model, firstly, the author establishes the attribute space matrix and determines the weight based on Shannon entropy theory; secondly, calculates attribute measure; thirdly, evaluates that with confidence criterion and score criterion; finally, an application example is given. The results show that the water quality of the groundwater sources for the city comes up to the grade II or III standard. There is no pollution that obviously exceeds the standard and the water can meet people’s needs .The results from an evaluation of this model are in basic agreement with the observed situation and with a set pair analysis (SPA) model.

Time-depth conversion of transient electromagnetic method used in coal mines

Accuracy of time-depth conversion in data processing of transient electromagnetic prospecting always affects the accu- rate positioning of water bodies in coal mines. In order to improve the accuracy of time-depth conversion, we established a mathe- matical model of time-depth conversion for a transient electromagnetic method based on the theory of "double smoke ring effect" of full space transient electromagnetic field transmission. Using a 3-layer as well as a 4-layer geo-electric model for roadway floors, we performed the time-depth conversion of theoretical curves of apparent resistance varying over time. In these curves, the depth corresponding to extreme value points is nearly the same as the depth of a geo-electric model. The position of water body deter- mined by our time-depth conversion method agrees well with the result of borehole drilling, indicating that the established time-depth conversion model can clearly improve the accuracy of spatial positioning of water bodies in coal mines.

The mixing of multi-source fluids in the Wusihe Zn–Pb ore deposit in Sichuan Province, Southwestern China

The Sichuan-Yunnan-Guizhou(SYG)metallogenic province of southwest China is one of the most important Zn-Pb ore zones in China,with^200 Mt ZnPb ores at mean grades of 10 wt.%Zn and 5 wt.%Pb.The source and mechanism of the regional Zn-Pb mineralization remain controversial despite many investigations that have been conducted.The Wusihe Zn-Pb deposit is a representative large-scale Zn-Pb deposit in the northern SYG,which mainly occurs in the Dengying Formation and yields Zn-Pb resources of^3.7 Mt.In this paper,Zn and S isotopes,and Fe and Cd contents of sphalerite from the Wusihe deposit were investigated in an attempt to constrain the controls on Zn and S isotopic variations,the potential sources of ore-forming components,and the possible mineralization mechanisms.Both theδ66Zn andδ34S values in sphalerite from the Wusihe deposit increase systematically from the bottom to the top of the strata-bound orebodies.Such spatial evolution inδ66Zn andδ34S values of sphalerite can be attributed to isotopic Rayleigh fractionation during sphalerite precipitation with temperature variations.The strong correlations between the Zn-S isotopic compositions and Fe-Cd concentrations in sphalerite suggest that their variations were dominated by a similar mechanism.However,the Rayleigh fractionation mechanism cannot explain the spatial variations of Fe and Cd concentrations of sphalerite in this deposit.It is noted that the bottom and top sphalerites from the strata-bound orebodies document contrasting Zn and S isotopic compositions which correspond to the Zn and S isotopic characteristics of basement rocks and host rocks,respectively.Therefore,the mixing of two-source fluids with distinct Zn-S isotopic signatures was responsible for the spatial variations of Zn-S isotopic compositions of sphalerite from the Wusihe deposit.The fluids from basement rocks are characterized by relatively lighter Zn(~0.2‰)and S(~5‰)isotopic compositions while the fluids from host rocks are marked by relatively heavier Zn(~0.6‰)and S(~15‰)isotopic compositions.

Application of Muskingum routing method with variable parameters in ungauged basin

This paper describes a flood routing method applied in an ungauged basin, utilizing the Muskingum model with variable parameters of wave travel time K and weight coefficient of discharge x based on the physical characteristics of the river reach and flood, including the reach slope, length, width, and flood discharge. Three formulas for estimating parameters of wide rectangular, triangular, and parabolic cross sections are proposed. The influence of the flood on channel flow routing parameters is taken into account. The HEC-HMS hydrological model and the geospatial hydrologic analysis module HEC-GeoHMS were used to extract channel or watershed characteristics and to divide sub-basins. In addition, the initial and constant-rate method, user synthetic unit hydrograph method, and exponential recession method were used to estimate runoff volumes, the direct runoff hydrograph, and the baseflow hydrograph, respectively. The Muskingum model with variable parameters was then applied in the Louzigou Basin in Henan Province of China, and of the results, the percentages of flood events with a relative error of peak discharge less than 20% and runoff volume less than 10% are both 100%. They also show that the percentages of flood events with coefficients of determination greater than 0.8 are 83.33%, 91.67%, and 87.5%, respectively, for rectangular, triangular, and parabolic cross sections in 24 flood events. Therefore, this method is applicable to ungauged basins.

Physical simulation of hydrodynamic conditions in high rank coalbed methane reservoir formation

In order to select highly productive and enriched areas of high rank coalbed methane reservoirs, based on hydrologic geology as one of the main factors controlling coalbed methane （CBM） reservoir formations, the effect of hydrodynamic forces controlling CBM reservoir formations was studied by a physical simulation experiment in which we used CBM reservoir simulation facilities. The hydrodynamic conditions of high coal rank reservoirs in the Qinshui basin were analyzed. Our experiment shows the following results： under strong hydrodynamic alternating action, 6C~ of coalbed methane reservoir changed from the start at -2.95% ~ -3.66%, and the lightening process occurred in phases; the CI-I4 volume reduced from 96.35% to 12.42%; the CO2 vo- lume decreased from 0.75% in sample 1 to 0.68% in sample 2, then rose to 1.13% in sample 3; the N2 volume changed from 2.9% in sample 1 to 86.45% in sample 3. On one hand, these changes show the complexity of CBM reservoir formation; on the other hand, they indicate that strong hydrodynamic actions have an unfavorable impact on CBM reservoir formation. It was found that the gas volume and hydrodynamic intensity were negatively correlated and low hydrodynamic flow conditions might result in highly productive and enriched areas of high rank CBM.

Climatological analysis of the seeing at Fuxian Solar Observatory

There is a significant seasonal variation in the seeing of Fuxian Solar Observatory(FSO). The seeing in summer and autumn is better than that in winter and spring. The overall seeing is divided into the boundary layer seeing and free atmosphere seeing to investigate the climatic phenomena or meteorological events that might lead to seasonal variation in the seeing. The overall seeing was measured by the solar difference image motion monitor(SDIMM). The boundary layer seeing is calculated from the temperature difference between air and water. The analysis results show that the seasonal variation in seeing is caused by the alternation of subtropical high and westerly jet. The decrease of seeing in winter and spring at FSO is probably related to the westerly jet. A complete analysis of the seeing at FSO is given in this paper. It is also the first time to describe FSO's boundary layer seeing and its measurement method.