Nd-Pb Isotopes of Basement Rocks,Granitoids and Basalts from the Western Margin of the Yangtze Craton:Implications for Crustal Evolution

Neodymium (Nd) depleted mantle model ages indicate that the Kangding complexes in the northern segment of the western Yangtze craton, argued as representative of the craton's basement, actually formed after 1.6 Ga. An Sm-Nd isochron of 706 Ma constrains the upper limit formation of the complex from Shaba, Sichuan Province. Lead (Pb) isotopic compositions imply that the southern and northern basements of the western Yangtze craton can not be correlated. The southern basement is characterized by higher ~206Pb/~204Pb ratios (≥17.69) than the northern ones (<17.69). However, Hercynian granitoids, gabbros as well as the Permian basalts in the northern segment show no difference from the southern segment in Pb isotopic compositions. This suggests that the southern and northern segments were controlled by one common mantle domain during the Late Paleozoic. Based on Nd model ages of sediments and metasediments, as well as the ages of their relict zircons, we infer that the Yangtze craton is mainly composed of 2.0 Ga crustal components. The Kangding complex represents the accretion products to the Yangtze craton in Neoproterozoic.

Late Paleozoic Sequence-Stratigraphic Frameworks and Sea Level Changes in Dianqiangui Basin and Its Adjacent Areas with Systematic Revision of Regional Unconformities

The formation process of the Dianqiangui basin, a special basin, occurred after the Caledonian orogeny, in the south of Guizhou, the west of Guangxi and the southeast of Yunnan, experienced three periods: it began in the Devonian, persisted in the Carboniferous, and became fiercer in the Permian. Controlled by syndepositional fault-zones, varieties of isolated carbonate platforms, large and small, were developed in the background of a deep-water basin, namely, an inter-platform ditch. And a special paleogeographical Late Paleozoic pattern marked by “platform-basin-hill-trough” was produced in both the Dianqiangui basin and its adjacent areas. Affected by regional tectonic activities and the global changes in the sea level, the platform carbonates and coal measures superimposed each other cyclically on the attached platform. The reef-building on the isolated platform and the margin of the attached platform corresponds to the development of the shale succession in the deep-water basin. All of these elementary characteristics reflect a regular and sophisticated filling succession of the Dianqiangui basin, a result of the dual controls of the regionally tectonic activities and the eustacy. Based on the two elementary features of the third-order sequences, i.e. the regularity of sedimentary-facies succession in space and the simultaneity of environmental changes in time, 25 third-order sequences could be discerned in the Upper Paleozoic strata in the Dianqiangui basin and its adjacent areas. On the basis of the two kinds of facies-changing surfaces and the two kinds of diachronisms in stratigraphic records, the regional Late Paleozoic sequence-stratigraphic framework in the Dianqiangui basin and its adjacent areas can be established. There are two types of facies-changing surfaces and two types of diachronisms in stratigraphic records: the static type, a result of the change in sedimentary facies in space, and the dynamic type, a result of the change in time. These two types of facies-changing surfaces led to the generation of the two types of diachronisms: the diachronism of facies-changing surfaces that was formed by the static facies-changing surfaces, and the diachronism of punctuated surfaces that was formed by the dynamic facies-changing surfaces. The two types of facies-changing surfaces and the two types of diachronisms in stratigraphic records are the key to the establishment of the sequence-stratigraphic framework. The sequence boundaries could be divided geologically into four types: tectonic unconformity, sedimentary unconformity, drowned unconformity and their correlative surfaces. All of these four types can be further grouped into exposed punctuated surfaces and deepened punctuated surfaces. The tectonic unconformity is similar to Type Ⅰ sequence boundary, and the sedimentary unconformity is similar to Type Ⅱ sequence boundary defined by Vail et al.. In terms of sequence stratigraphy, the tectonic unconformities of the Ziyun movement, the Qiangui epeirogeny and the Dongwu revolution as well as the drowned unconformity in the transitional period from the Permian to the Triassic can be systematically defined and their geological characteristics are briefly presented.

Late-Stage Ductile Deformation in Xiongdian-Suhe HP Metamorphic Unit, North-Western Dabie Shan, Central China

New structural and petrological data unveil a very complicated ductile deformation history of the Xiongdian-Suhe HP metamorphic unit, north-western Dabie Shan, central China. The fine-grained symplectic amphibolite-facies assemblage and coronal structure enveloping eclogite-facies garnet, omphacite and phengite etc., representing strain-free decompression and retrogressive metamorphism, are considered as the main criteria to distinguish between the early-stage deformation under HP metamorphic conditions related to the continental deep subduction and collision, and the late-stage deformation under amphibolite to greenschist-facies conditions occurred in the post-eclogite exhumation processes. Two late-stages of widely developed, sequential ductile deformations D 3 and D 4, are recognized on the basis of penetrative fabrics and mineral aggregates in the Xiongdian-Suhe HP metamorphic unit, which shows clear, regionally, consistent overprinting relationships. D 3 fabrics are best preserved in the Suhe tract of low post-D 3 deformation intensity and characterized by steeply dipping layered mylonitic amphibolites associated with doubly vergent folds. They are attributed to a phase of tectonism linked to the initial exhumation of the HP rocks and involved crustal shortening with the development of upright structures and the widespread emplacement of garnet-bearing granites and felsic dikes. D 4 structures are attributed to the main episode of ductile extension (D 1 4) with a gently dipping foliation to the north and common intrafolial, recumbent folds in the Xiongdian tract, followed by normal sense top-to-the north ductile shearing (D 2 4) along an important tectonic boundary, the so-called Majiawa-Hexiwan fault (MHF), the westward continuation of the Balifan-Mozitan-Xiaotian fault (BMXF) of the northern Dabie Shan. It is indicated that the two stages of ductile deformation observed in the Xiongdian-Suhe HP metamorphic unit, reflecting the post-eclogite compressional or extrusion wedge formation, the subhorizontal ductile extension and crustal thinning as well as the top-to-the north shearing along the high-angle ductile shear zones responsible for exhumation of the HP unit as a coherent slab, are consistent with those recognized in the Dabie-Sulu UHP and HP metamorphic belts, suggesting that they were closely associated in time and space. The Xiongdian-Suhe HP metamorphic unit thus forms part of the Triassic (250-230 Ma) collision orogenic belt, and can not connect with the South Altun-North Qaidam-North Qinling UHP metamorphic belt formed during the Early Paleozoic (500-400 Ma).

Paleotectonic Setting of Dongyan Group of Middle and Upper Proterozoic in Central Fujian Province

The central Fujian Province, situated on the juncture of paleo-uplift of Wuyishan, Yongmei Late Paleozoic depression and the eastern volcanic rift-faulting zone, is mainly composed of the outcropped metamorphic basements in the Middle-Late and Early Proterozoic, which constitute two upper and lower giant thick formations of Precambrian volcanic-sedimentary cycles, respectively. The formation of Dongyan Group is an important Middle-Upper Proterozoic component, and the Dongyan Group is directly related to massive sulfide deposit in this area. In recent years, plenty of lead, zinc, copper, silver and gold deposits have been found and explored. The Precambrian paleorift setting of the central Fujian Province served as a favorite metallogenic background for the formation of large- and superlarge-scale volcanic massive sulfide (VMS) lead and zinc polymetal deposits. The Dongyan Group consists chiefly of a set of ancient volcanic sedimentary formations that are composed mainly of greenschist. Its major lithologic types comprise greenschist, marble, quartzite and granofels class including various components. The metamorphic rocks of Dongyan Group are the main composition of Middle and Upper Proterozoic volcanic-sedimentary cycle. The original rock of Dongyan Group, a stable rock association, is volcanic sedimentation and normal marine sedimentation. But the original volcanic rocks, basic and acid, are bimodal. The volcanic rocks were formed in the extensional continental rift setting.

Thermal History of Rocks in the Shiwandashan Basin, Southern China: Evidence from Apatite Fission Track Analysis

Based on interpretations of the apatite fission track analysis data for 10 outcrop samples and forward modeling of confined fission track length distributions, the thermal history of rocks in the Shiwandashan basin and its adjacent area, southern China, has been qualitatively and semi quantitatively studied. The results reflect several features of the thermal history. Firstly, all the samples have experienced temperatures higher than 60-70 ℃. Secondly, the time that the basement strata (T 1 b ) on the northwestern side of the Shiwandashan basin were uplifted and exhumed to the unannealed upper crust (with a paleogeotemperature of below 60-70 ℃) is much earlier than the basement rocks ( γ 1 5) on the southeastern side of the basin. Thirdly, the thermal history of samples from the basin can be divided into six stages, i.e., the fast burial and heating stage (220-145 Ma), the transient cooling stage (145-135 Ma), the burial and heating stage (135-70 Ma), the rapid cooling stage (70-50 Ma), the relatively stable stage (50-20 Ma) and another rapid cooling stage (20 Ma to present).

"Three-Component" Digital Prospecting Method: A New Approach for Mineral Resources Quantitative Prediction and Assessment

Three-component' method consists of three close-connected aspects: geological anomaly, diversity of mineralization and mineral deposit spectrum. All these three concepts are not new separately, but it is a new approach to combine these three aspects in one single concept for quantitative mineral resources prediction and assessment and it is also the first time to conduct a more detailed study in each aspect. Investigation and clarification of geological anomalies, diversity of mineralization and spectrum of mineral deposits are realized by digitization and quantification of ore forming controlling factors, ore-existing symbols or marks, characteristics of mineralization and regulation of ore-genesis and laws of distribution. These procedures lead to construction of a 'digital model' for mineral resources prediction and assessment.

Opening of the Tethys in southwest China and its significance to the breakup of East Gondwanaland in late Paleozoic:Evidence from SHRIMP U-Pb zircon analyses for the Garzêophiolite block

SHRIMP U-Pb zircon analyses for a gabbro sample from the Garzê ophiolite block yielded a mean 206Pb/238U age of 292±4 Ma, which indicated that the spread- ing time of the Garzê-Litang Tethys was most likely at the earliest Permian. Combined with previous studies, we sug- gest that the opening of the Tethys in southwest China was derived from breakup of the East Gondwanaland in the late Paleozoic.

Algorithm of emissivity spectrum and temperature separation based on TASI data

建立了适合于TASI的热红外高光谱发射率的经验关系,以此修正了分离方法(TES)中的MMD模型,在对温度和发射率进行精度评价的基础上,将反演结果应用于城市地表温度的日较差分析。结果表明:(1)反演的温度与实测温度的平均绝对误差为1.8K,平均相对误差为0.59%;(2)地面实测宽波段发射率与反演发射率的平均差值为0.036,差值的标准差为0.032;(3)同种地物的发射率曲线的反演结果与实验室测量发射率曲线的波形是一致的;(4)温度日较差分析结果是合理的。因此,本文的反演精度能满足研究需求,将该方法应用于TASI数据的温度与发射率的分离是可行的。