The hot deformation behavior of a newly designed V micro-alloyed high manganese steel(HMnS)was investigated in order to guide the development of the hot-metal-gas-forming process.Single-pass hot compression experiment...The hot deformation behavior of a newly designed V micro-alloyed high manganese steel(HMnS)was investigated in order to guide the development of the hot-metal-gas-forming process.Single-pass hot compression experiments were conducted in the temperature range of 950–1100°C and the strain rate range of 0.05–10 s^(−1),and the stress–strain curves and the corresponding softening mechanism of the V micro-alloyed HMnS were analyzed.Results show that two types of stress–strain curves,representing the work hardening(WH)-dynamic recovery(DRV)-dynamic recrystallization(DRX)mechanism and the WH–DRV mechanism,respectively,occur during the deformation process.Moreover,the WH–DRV–DRX mechanism gradually transforms into the WH–DRV mechanism with the increasing strain rate and decreasing deformation temperature.Two types of constitutive models considering the softening mechanism difference were established and verified by additional hot-deformation experiments.Hot processing map of the HMnS was established and correlated well with the microstructure evolution result.Based on the constitutive models and processing map,the optimal processing parameter range and flow stress of HMnS for the hot-metal-gas-forming were determined.展开更多
基金the National Natural Science Foundation of China(Grant Nos.52201101 and 52274372)the National Key R&D Program of China(2021YFB3702404)the Fundamental Research Funds for the Central Universities(FRF-TP-22-013A1).
文摘The hot deformation behavior of a newly designed V micro-alloyed high manganese steel(HMnS)was investigated in order to guide the development of the hot-metal-gas-forming process.Single-pass hot compression experiments were conducted in the temperature range of 950–1100°C and the strain rate range of 0.05–10 s^(−1),and the stress–strain curves and the corresponding softening mechanism of the V micro-alloyed HMnS were analyzed.Results show that two types of stress–strain curves,representing the work hardening(WH)-dynamic recovery(DRV)-dynamic recrystallization(DRX)mechanism and the WH–DRV mechanism,respectively,occur during the deformation process.Moreover,the WH–DRV–DRX mechanism gradually transforms into the WH–DRV mechanism with the increasing strain rate and decreasing deformation temperature.Two types of constitutive models considering the softening mechanism difference were established and verified by additional hot-deformation experiments.Hot processing map of the HMnS was established and correlated well with the microstructure evolution result.Based on the constitutive models and processing map,the optimal processing parameter range and flow stress of HMnS for the hot-metal-gas-forming were determined.
