The metallic Zr65Ni25Ti10（mole fraction, %） glass has been fabricated by a single roller melt-spinning method. The glass forming ability（GFA） and thermal stability of the Zr65Ni25Ti10 melt-spun ribbons were invest...The metallic Zr65Ni25Ti10（mole fraction, %） glass has been fabricated by a single roller melt-spinning method. The glass forming ability（GFA） and thermal stability of the Zr65Ni25Ti10 melt-spun ribbons were investigated by using X-ray diffraction（XRD） and differential scanning calorimetry（DSC） in the mode of continuous heating. It is shown that the reduced glass transition temperature (Trg) is 0.506 and the supercooled liquid region （ΔTx） is 30 K. Two exothermic peaks were observed in the DSC curves of the as-quenched ribbon, which indicates that the crystallization process undergoes two different stages. The phase transformation during the isothermal annealing was investigated by X-ray diffraction（XRD） and transmission electronic microscope（TEM）. It is observed that the metastable FCC Zr2Ni（Fd3m, a=12.27 ） precipitated while annealing in the suppercooled region（615 K） and the stable BCT Zr2Ni（I4/mcm, a=6.499 , c=5.270 ） precipitated while annealing at higher temperature（673 K or 723 K）. The crystallines are on nanoscale, with grain size of 1530 nm. The reason for the precipitation of the different structural Zr2Ni from the glassy matrix under different annealing conditions was discussed based on the concept of multi-component chemical short range order（MCSRO）.展开更多
The design operating conditions of rubber dams were analyzed,and it is found that the operating conditions are similar to the actual operating conditions of changes in the internal pressure ratio of a specific rubber ...The design operating conditions of rubber dams were analyzed,and it is found that the operating conditions are similar to the actual operating conditions of changes in the internal pressure ratio of a specific rubber dam bag in the process of filling and draining. Based on this,the linear relationship curve between the internal pressure head H0 and the real-time dam height H and its approximate analytical formula can be obtained,which can be used as a supplement and correction method for the measurement method of real-time dam height during rubber dam operation,and provides reference for rubber dam project managers.展开更多
文摘The metallic Zr65Ni25Ti10（mole fraction, %） glass has been fabricated by a single roller melt-spinning method. The glass forming ability（GFA） and thermal stability of the Zr65Ni25Ti10 melt-spun ribbons were investigated by using X-ray diffraction（XRD） and differential scanning calorimetry（DSC） in the mode of continuous heating. It is shown that the reduced glass transition temperature (Trg) is 0.506 and the supercooled liquid region （ΔTx） is 30 K. Two exothermic peaks were observed in the DSC curves of the as-quenched ribbon, which indicates that the crystallization process undergoes two different stages. The phase transformation during the isothermal annealing was investigated by X-ray diffraction（XRD） and transmission electronic microscope（TEM）. It is observed that the metastable FCC Zr2Ni（Fd3m, a=12.27 ） precipitated while annealing in the suppercooled region（615 K） and the stable BCT Zr2Ni（I4/mcm, a=6.499 , c=5.270 ） precipitated while annealing at higher temperature（673 K or 723 K）. The crystallines are on nanoscale, with grain size of 1530 nm. The reason for the precipitation of the different structural Zr2Ni from the glassy matrix under different annealing conditions was discussed based on the concept of multi-component chemical short range order（MCSRO）.
文摘The design operating conditions of rubber dams were analyzed,and it is found that the operating conditions are similar to the actual operating conditions of changes in the internal pressure ratio of a specific rubber dam bag in the process of filling and draining. Based on this,the linear relationship curve between the internal pressure head H0 and the real-time dam height H and its approximate analytical formula can be obtained,which can be used as a supplement and correction method for the measurement method of real-time dam height during rubber dam operation,and provides reference for rubber dam project managers.
