Alkali Vapor Corrosion of Different Refractories at High Temperatures

Commercial high purity corundum brick,corundum-mullite brick,mullite brick,calcium hexaaluminate brick and calcium hexaaluminate-corundum brick were studied to investigate their reaction state and alkali vapor corrosion mechanism at 1370 and 1500℃.The results show that:(1)served in hot alkali vapor,the high-purity corundum brick has no obvious slag layer but expands dramatically;(2)the corundum-mullite brick shows obvious reactive expansion at 1370℃and melting corrosion happens at 1500℃;(3)at 1370℃alkali vapor and mullite brick react and form a slag layer without volume effect;when the temperature increases to 1500℃,the reaction melting corrosion intensifies;(4)the calcium hexaaluminate brick and the calcium hexaaluminate-corundum brick form a thin slag layer in alkali vapor,and the sample surface absorbs Na+to form a dense layer with small volume effect.

In-situ Formation of MgAl_(2)O_(4):A Method of Tailoring Microstructure and Properties for Development of High-performance Refractories

The in-situ formation mechanism of MgAl_(2)O_(4) was introduced,focusing on the formation process by solid phase reaction and gas phase reaction as well as the phenomenon of secondary spinelization.The influencing factors of the in-situ MgAl_(2)O_(4) formation and its effect on the microstructure and the properties of materials were systematically summarized for the Al2O3-MgO-MgAl_(2)O_(4) system and the carbon-containing refractories systems.It was pointed out that the in-situ formation of MgAl_(2)O_(4),including secondary spinelization,can regulate the microstructure and the service performance of materials.Its expansion effect can not only offset the shrinkage caused by sintering to improve the corrosion resistance of refractories,but also seriously restrict the reliability of functional refractories.The composition,the particle size,the atmosphere,and the temperature are important factors affecting the in-situ formation of MgAl_(2)O_(4).In the carbon-containing materials systems,the solid-solid reaction and the gas-solid reaction coexist to produce MgAl_(2)O_(4),which provides an effective way to further regulate the microstructure and the properties of materials through the reaction process.

Steam Oxidation Resistance Comparison of Several Silicon Carbide Refractories at Elevated Temperatures

The oxidation tests of different SiC refractories including Si3N4-SiC bricks,Si3N4-Si2N2O-SiC bricks from China(SNO-1),Si3N4-Si2N2O-SiC bricks from overseas(SNO-2),SiAlON-SiC bricks,oxides bonded SiC bricks,self-bonded SiC bricks as well as SiC castables were carried out in the steam atmosphere(1 000 ℃,32 kg·m-3·h-1)for different durations(100,200,300,400 and 500 h).The mass,the volume,the bulk density and the apparent porosity before and after the oxidation were tested.The XRD and SEM analyses were conducted.The results indicate that:(1)under the steam atmosphere condition(1 000 ℃,32 kg·m-3·h-1),as the oxidation time increases from 0 to 500 h,the volume and the mass of the silicon carbide refractories increase,while the bulk density decreases;in terms of the apparent porosity,oxides bonded SiC bricks and SiC castables present an increasing trend,Si3N4-SiC bricks,SiAlON-SiC bricks and self-bonded SiC bricks present an increasing trend first and then a decreasing trend,and Si3N4-Si2N2O-SiC bricks present a decreasing trend or a trend of decreasing first and then increasing;(2)as for Si3N4-Si2N2O-SiC bricks,SNO-1 and SNO-2 have basically the same chemical and phase composition,SNO-2 has the lower mass change rate than SNO-1 during oxidation from 200-500 h,which indicates that SNO-2 has the better steam oxidation resistance than SNO-1.

Research on Steam Oxidation Resistance of Si3N4-bonded SiC Refractories

The steam oxidation of Si3N4-bonded SiC was determined at 1000℃for 50,100,150,200,250 and 300 h,respectively,according to ASTM C863-2000.The evolution of the phase composition and the microstructure as well as their relationship was investigated by XRD and SEM.The results show that the oxidation rate of Si3N4-bonded SiC is periodic.The presence of nitrogen element can impede the crystallization of SiO2 glass;the local enrichment of CaO impurities is unfavorable for the existence of fibrous SiO2.SiO2 mainly exists as cristobalite when the CaO/SiO2 ratio reaches a suitable level,but gradually transforms to quartz along with the oxidation time when the SiO2 content increases,or the CaO/SiO2 ratio decreases,due to the insufficient mineralization of CaO.The crystallization of SiO2 glass,especially the formation of quartz is the key factor leading to the volume expansion and structural stress.When the cracks extend and reach the surface,the degradation of the material accelerates.

Effects of Different Raw Materials and Additions on Wave Transparency of Alumina Fiber Products

Fiber products for microwave kilns were prepared using alumina fibers with alumina contents of 72 mass%and 80 mass%,and calcined alumina powder(4-6μm)as the main raw materials,silica sol as the binder,and cationic starch as the flocculant.Effects of different raw materials and their additions on the wave transparency of fiber products were researched.The results show that as the alumina fiber(72%)addition increases,the heating rate of the samples first decreases and then increases,and the corresponding wave transparency of the sample first increases and then decreases.When the alumina fibers addition is 40 mass%and the alumina powder addition is 30 mass%,the prepared microwave kiln lining material has a higher mullite content,which improves the wave transparency of the sample.The sample prepared from alumina fibers with an alumina content of 80%has a suitable glass-mullite phase ratio,performs lower overall dielectric constant and good wave transparency,and is a suitable lining material for microwave kilns.

Research of Test Method on Abrasion Resistance at Elevated Temperatures of Refractories

In this work,the factors and parameters of a test method on abrasion resistance at elevated temperatures were discussed and researched.First of all,the precision tests of the test method on abrasion resistance at elevated temperatures were conducted in 8 laboratories.The results such as the standard deviation and reproducibility show good repeatability and reliability.The relationship between the stability of refractory performance and the standard deviation of their wear value was analyzed.Then the impact of the heat treatment condition of unshaped refractories and oxidation of SiC sand as abrasive on the lost volume of the tested specimens was researched.

Current Situation and Development of Refractories for Clean Steel Production

The low cost and high efficient clean steels metallur- gy has been focused much attention in China. Among the factors affecting the cleanliness and consequent quali- ty of steel products, refractories are one of the key fac- tors. Meanwhile the restriction of resource, energy and environment is getting stronger, thus the improvement of refractories becontes much more important. In this paper, refractories selection principle Jbr clean steel production according to their thermodynamic features was ex- plained; refractories for tundLsh and flow control in con- tinuous casting, which play important roles in prohibi- ring secondary contamination of molten steel, were intro- duced. Moreover, new development of low-carbon and carbon-free refractory materials was also described.

Preparation of Light-weight Spinel Refractories by Foaming-gel Process

Light-weight magnesium -aluminate spinel materi- als were prepared by foaming-gel process with polyalumi- nium chloride （PAC） as gel. Effect of solid loading in initial slurry on microstructure, porosity, pore size distri- bution, thermal conductivity and mechanical properties was investigated. The results show that the bulk density of the light-weight magnesium -aluminate spinel mate- rials is in the range of O. 7 1.2 g cm-3 ; pore size distribution curves show single-peak characteristics and the mean pore size is in the range of 30. 83 - 61.37 μm ; with the increase of solid loading, the linear shrinkage of the green body during firing and the permanent change in dimensions on heating at l 600 ℃ for 3 h de- crease, but the bulk density increases, the mechanical properties increase obviously; the maximum compressive strength and bending strength reach 35. 25 MPa and 9. 92 MPa, respectively, while the bulk density is 1. 16 g · cm ; and the thermal conductivity at 1 000 ℃ tea- ches 0. 371 W · m-1 . K-1 while the bulk density is O. 7 -3 g · cm

Refractories for RH Degassers and Ways of Improving Their Lining Life

This paper attempts to clarify the systematic works of the refractories for the RH degassers and the ways of improving their lining life. It includes ： （ 1 ） types of RH degassers ; （2） the operating conditions of refining and the severely damaged areas in RH degassers ; （3） the reasons why side wall and bottom of lower vessel, throat and snorkels become the severe wear areas are analyzed, such as erosion and abrasion caused by the high circula- tion rate of treated molten steel, thermal and structural spalling by the violent temperature change, high corrosion by the Fe-oxides containing siliceous slag and CaF：riched desulfurization powders attack, degradation of texture by the vaporization of refractory components in vacuum and in oxygen blowing; besides the above men- tioned factors, what other reasons to make the snorkels become the most quick wear elements are also explained; （4） the studies of resistance to refining slags attack and slag penetration and its prevention ; the evaluation of va- rious refractory materials to withstand the attack of slags is based on the experimental results of rotating cylinder method, rotary drum test and induction furnace test, and the phase diagrams analyses; the measures to reduce the slag penetration are discussed, for example the deep of slag penetration can be decreased by reducing the size of brick pores ; （5） suitable refractory materials selection and recent developments for the different severe wear areas in RH, and lining maintenance; （6） refractories for RH to refine silicon steel; （7） the ways of improving RH lining life.

Roles and Progress of Refractories for Clean Steel Technology

This paper presents a general survey of roles and progress of fundamental and fitnctional refractories applied in seco Mal：y steelmaking, tundish and mold tnetallurgy along with the evolution of clean steel technology, focusing on refractories that are to create clean environments, benefit cleanliness and productive efficiency for the clean steal production, in particular, reducing the total oxygen content and inclusion defects in steel. All that arguments have revealed in abundant that the interaction between the clean steel technology and inno vation of refractories is so intimate that the philosophy of clean steel technology would not be accomplished without functioning of the innovated state of the arts refractories in it.

Chrome-free Basic Refractories for Burning Zone of Cement Rotary Kiln

Based on the relevant phase diagrams of ternary system in MgO - CaO - ZrO2 - SiO2 quarternary systems, the phase diagram of Fe - O system and the condensed phase stability area diagram of iron oxides, the corrosion resistance of MgO - CaO - ZrO2 refractories to silicate cement, and the forming conditions and prepar- ing measures of hercynite are analyzed.

Steam Oxidation Resistance of Nitride Bonded Silicon Carbide Refractories for Waste Incinerators at Elevated Temperatures

Steam oxidation resistance of Si3N4 and Si2N2O as well as SiAlON bonded SiC refractories at 900℃was tested according to ASTM-C863.Phase composition and microstructure before and after oxidation were analyzed by XRD and SEM.The results show that Si3N4 and Si2N2O bonded SiC refractory presents better steam oxidation resistance than SiAlON bonded SiC.For Si3N4 and Si2N2O bonded SiC,the oxidation speed is higher with more pronounced volume expansion in the early 100 h;afterwards,the volume expansion slows down gradually and starts to level off after 300 h.It is considered that the high silica glass phase formed during the oxidation covers Si3N4 and Si2N2O,and SiC as a protective layer and fills the open pores.But for SiAlON bonded SiC,the volume expands gradually and constantly with the increasing oxidation duration even after 500 h,due to the continuous formation of mullite transformed from oxidation products and Al2O3 in SiAlON.

Effect of H_(2)O_(2) Addition on Anti-explosion Performance of p-Al_(2)O_(3) Bonded Corundum Castables

In order to improve the anti-explosion performance ofρ-Al_(2)O_(3) bonded corundum castables,H_(2)O_(2) was added(0,0.025%,0.050%,0.075%,0.100%and 0.125%,by mass)as the anti-explosion agent.After mixing and casting,specimens were prepared.Some specimens were cured at room temperature for 12 h and demoulded for the anti-explosion performance test at different temperatures(450,500,550,600,650,700,750 and 800℃);the other specimens were cured,dried and fired,and tested in terms of the apparent porosity,the density,the cold mechanical properties,the air permeability and the pore size distribution.The results show that:(1)with the increase of the H_(2)O_(2) addition,the anti-explosion performance of castables increases gradually,the average pore size increases gradually,and the density and the strength decrease gradually;(2)by comprehensive consideration,the appropriate addition of H_(2)O_(2) shall be within 0.075%.

Effect of Different Silica Fumes on Properties of Al_(2)O_(3)-SiC-C Castables for Iron Trough

In order to improve the performance of Al_(2)O_(3)-SiC-C castables for iron trough,samples were prepared using brown corundum,dense corundum,activated alumina micropowder,ball pitch,and silicon as main raw materials,calcium aluminate cement as the binder.Several kinds of silica fumes(93SiO_(2),96SiO_(2),and 99SiO_(2))with different particle size distributions and chemical composition were added to research the effects on the properties of castables.The results show that the sample with 99SiO_(2) fume has high water requirement for molding,but the bulk density is the lowest,the apparent porosity is the highest,the oxidation resistance is the worst,and the permanent linear change on heating is low after firing at 1 450 ℃ for 3 h.The bulk density and the apparent porosity of the sample with 93SiO_(2) fume or 96SiO_(2) fume are equivalent,the hot modulus of rupture of the sample with 93SiO_(2) fume is the lowest,and the slag resistance of the sample with 96SiO_(2) fume is the best.The comprehensive performance of the sample with 96SiO_(2) fume is the best.

Main Influencing Factors on Service Life of High Chrome Refractories for Coal Water Slurry Gasifiers

The main characteristics of high chrome refractories for coal water slurry gasifiers were introduced. The damage mechanism of the refractories was analyzed by observing the microstructure of the used high chrome refractories with the aid of SEM. The main influencing factors on the service life of the refractories were summarized.

A Review on Some Applications of Magnesia in Current China Refractories Industry

Magnesia-based refractories hold a big share in the total refractories output in China because of abundance of magnesite resource. In this paper a short review has been focused on the current and future new use of magnesia in the production of magnesia-based products including low carbon MgO-C bricks, MgO- CaO bricks, MgO-based castables, MgO-CaO-Fe2O3 ramming mix and MgO-CaO-C bricks for low carbon steelmaking and clean steel making, magnesite ball for slag splashing, MgO-CaO-ZrO2 for sintering and transfering zones of cement kiln and MgAlON for special use in the steel industry.

Determination of Boron in Refractories

Refractory materials have been widely used in high-temperature industries,in which the boron content has a great influence on the performance.To control the detection quality and satisfy the requirement of production and scientific research of refractories,conditional tests involving three methods for the boron determination(alkali titrimetry,inductively coupled plasma atomic emission spectrometry(ICP-AES),and curcumin absorption spectrophotometry)were carried out in this work.The affecting factors on the determination of boron were analyzed and discussed by performing the experiment.The results show that compared with curcumin absorption spectrophotometry,alkali titrimetry and ICP-AES have the advantages of simple operation,quick analysis and high precision(relative standard deviation<5%),which are more appropriate for boron determination in refractories.

Technology Progress of Refractories for Iron Making in China

This paper reviews the present development situation of refractories for iron making system in China, which includes blast furnace, hot blast stove and coke dry quenching, etc. Varieties and performances of refractories used by the top steel and iron groups such as Baosteel, Wuhan I＆S Group and Anshan I＆S Group for iron making were exemplified and concerned problems were analyzed, together with solutions and suggestions for future refractories R＆D work.

Erosion Effect of Molten Steel on Carbon Containing Refractories for Continuous Casting

The erosion resistance of carbon containingrefractories for continuous casting to molten steel wasinvestigated by means of simulative erosion test and examining used refractories. Decarbonization and reaction between molten steel and decarbonization layer are main erosion process of carbon containingrefractories by molten steel. The reactions between molten steel and oxide in refractories determine thethickness of decarbonization layer. A dense layer formation on the working surface contacting withmolten steel during casting will suppress decarbonization and erosion process.

Influence of Glass Dust on Properties of Alumina-carbon Refractories

In order to improve the properties of alumina-carbon refractories,specimens were prepared using white fused corundum,zirconia-mullite and flake graphite as the raw materials,phenolic resin as the binder,adding different mass fractions(1.5%,2.0%,and 2.5%,respectively)of glass dust,cold isostatic pressing by 120 MPa,drying and firing at 900℃for 3 h.Effects of the glass dust addition on the apparent porosity,bulk density,cold modulus of rupture,hot modulus of rupture and thermal shock resistance were studied.The results show that the cold modulus of rupture of the specimens is improved significantly as the results of glass dust accelerating sintering.However,the hot modulus of rupture decreases.As the glass phase buffers the strain produced by thermal shock,the thermal shock resistance of alumina-carbon specimens is improved,especially for low carbon alumina-carbon materials.