An In-Situ Formed Tunneling Layer Enriches the Options of Anode for Efficient and Stable Regular Perovskite Solar Cells

Perovskite solar cells(PSCs)are taking steps to commercialization.However,the halogen-reactive anode with high cost becomes a stumbling block.Here,the halogen migration in PSCs is utilized to in situ generate a uniform tunneling layer between the hole transport materials and anodes,which enriches the options of anodes by breaking the Schottky barrier,enabling the regular PSCs with both high efficiency and stability.Specifically,the regular PSC that uses silver iodide as the tunneling layer and copper as the anode obtains a champion power conversion efficiency of 23.24%(certified 22.74%)with an aperture area of 1.04 cm^(2).The devices are stable,maintaining 98.6%of the initial effi-ciency after 500 h of operation at the maximum power point with continuous 1 sun illumination.PSCs with different tunneling layers and anodes are fabricated,which confirm the generality of the strategy.

Two-Dimensional Materials for Highly Efficient and Stable Perovskite Solar Cells

Perovskite solar cells(PSCs)offer low costs and high power conversion efficiency.However,the lack of long-term stability,primarily stemming from the interfacial defects and the sus-ceptible metal electrodes,hinders their practical application.In the past few years,two-dimensional(2D)materials(e.g.,graphene and its derivatives,transitional metal dichalcogenides,MXenes,and black phosphorus)have been identified as a promising solution to solving these problems because of their dangling bond-free surfaces,layer-dependent electronic band structures,tunable functional groups,and inherent compactness.Here,recent progress of 2D material toward efficient and stable PSCs is summarized,including its role as both interface materials and electrodes.We discuss their beneficial effects on perovskite growth,energy level alignment,defect passivation,as well as blocking external stimulus.In particular,the unique properties of 2D materials to form van der Waals heterojunction at the bottom interface are emphasized.Finally,perspectives on the further development of PSCs using 2D materials are provided,such as designing high-quality van der Waals heterojunction,enhancing the uniformity and coverage of 2D nanosheets,and developing new 2D materials-based electrodes.

The Main Progress of Perovskite Solar Cells in 2020-2021

Perovskite solar cells(PSCs)emerging as a promising photovoltaic technology with high efficiency and low manufacturing cost have attracted the attention from all over the world.Both the efficiency and stability of PSCs have increased steadily in recent years,and the research on reducing lead leakage and developing eco-friendly lead-free perovskites pushes forward the commercialization of PSCs step by step.This review summarizes the main progress of PSCs in 2020 and 2021 from the aspects of efficiency,stability,perovskite-based tandem devices,and lead-free PSCs.Moreover,a brief discussion on the development of PSC modules and its challenges toward practical application is provided.

Heterogeneous FASnI3 Absorber with Enhanced Electric Field for High-Performance Lead-Free Perovskite Solar Cells

Lead-free tin perovskite solar cells(PSCs)have undergone rapid development in recent years and are regarded as a promising ecofriendly photovoltaic technology.However,a strategy to suppress charge recombination via a built-in electric field inside a tin perovskite crystal is still lacking.In the present study,a formamidinium tin iodide(FASnI;)perovskite absorber with a vertical Sn;gradient was fabricated using a Lewis base-assisted recrystallization method to enhance the built-in electric field and minimize the bulk recombination loss inside the tin perovskites.Depth-dependent X-ray photoelectron spectroscopy revealed that the Fermi level upshifts with an increase in Sn;content from the bottom to the top in this heterogeneous FASnI;film,which generates an additional electric field to prevent the trapping of photo-induced electrons and holes.Consequently,the Sn;-gradient FASnI;absorber exhibits a promising efficiency of 13.82%for inverted tin PSCs with an open-circuit voltage increase of 130 mV,and the optimized cell maintains over 13%efficiency after continuous operation under 1-sun illumination for 1,000 h.

Stable perovskite solar cells with 23.12% efficiency and area over 1 cm^(2) by an all-in-one strategy

To realize the commercialization of perovskite solar cells(PSCs), it is required to overcome the remaining challenges in device enlargement and operational stability. Here, we report an all-in-one strategy by integrating the oxidation of hole-transport material(HTM) with the formation of the passivation layer, which simultaneously solved the stability issues caused by HTM oxidation and realized the uniform defects in passivation over a large area. The resulting devices achieved a certified PCE of23.12% on average with an aperture area of 1.04 cm^(2) and are reproducible with high operational stability because of the exclusion of air exposure, hygroscopic Li-TFSI, and the lithium-based wastes, maintaining ca. 90% of their initial PCEs after operation at the maximum power point under continuous 1 sun illumination for 1,600 h. Our strategy simplifies the fabrication process of PSCs, which is compatible with commercial-scale methods, offering facile access to efficient and stable large-area PSCs.

Recent progress in perovskite solar cells:from device to commercialization

Perovskite solar cells(PSCs) are undergoing rapid development and the power conversion efficiency reaches 25.7% which attracts increasing attention on their commercialization recently.In this review,we summarized the recent progress of PSCs based on device structures,perovskite-based tandem cells,large-area modules,stability,applications and industrialization.Last,the challenges and perspectives are discussed,aiming at providing a thrust for the commercialization of PSCs in the near future.