Laboratory visualization of damage asymmetry formation of rock fracture via acoustic emission and digital imaging correlation

Rock fracture mechanics and accurate characterization of rock fracture are crucial for understanding a variety of phenomena interested in geological engineering and geoscience.These phenomena range from very large-scale asymmetrical fault structures to the scale of engineering projects and laboratory-scale rock fracture tests.Comprehensive study can involve mechanical modeling,site or post-mortem investigations,and inspection on the point cloud of the source locations in the form of earthquake,microseismicity,or acoustic emission.This study presents a comprehensive data analysis on characterizing the forming of the asymmetrical damage zone around a laboratory mixed-mode rock fracture.We substantiate the presence of asymmetrical damage through qualitative analysis and demonstrate that measurement uncertainties cannot solely explain the observed asymmetry.The implications of this demonstration can be manifold.On a larger scale,it solidifies a mechanical model used for explaining the contribution of aseismic mechanisms to asymmetrical fault structures.On a laboratory scale,it exemplifies an alternative approach to understanding the observational difference between the source location and the in situ or post-mortem inspection on the rock fracture path.The mechanical model and the data analysis can be informative to the interpretations of other engineering practices as well,but may face different types of challenges.

Petroleum resource assessment of the East Greenland Basin

The onshore and offshore parts of the East Greenland Basin are important areas for petroleum exploration at the North Pole. Although assessments by the US Geological Survey suggest a substantial petroleum potential in this area, their estimates carry a high risk because of uncertainties in the exploration data. This paper compares the reservoir-forming conditions based on data from the East Greenland Basin and the North Sea Basin. The petroleum resources of the East Greenland Basin were assessed by geochemical and analogy methods. The East Greenland Basin was a rift basin in the late Paleozoic–Mesozoic. Its basement is metamorphic rock formed by the Caledonian Orogeny in the Archean to Late Ordovician. In the basin, Devonian–Paleogene strata were deposited on the basement. Lacustrine source rock formed in the late Paleozoic and marine source rocks in the Late Jurassic. Shallow-marine sandstone reservoirs formed in the Middle Jurassic and deep-marine turbiditic sandstone reservoirs formed in the Cretaceous.The trap types are structure traps, horst and fault-block traps, salt structure traps, and stratigraphic traps. The East Greenland Basin possesses superior reservoir-forming conditions, favorable petroleum potential and preferable exploration prospects. Because of the lack of exploration data, further evaluation of the favorable types of traps, essential amount of source rock, petroleum-generation conditions and appropriate burial histories in the East Greenland Basin are required.

Prediction models of burst strength degradation for casing with considerations of both wear and corrosion

Casing wear and casing corrosion are serious problems affecting casing integrity failure in deep and ultra-deep wells.This paper aims to predict the casing burst strength with considerations of both wear and corrosion.Firstly,the crescent wear shape is simplified into three categories according to common mathematical models.Then,based on the mechano-electrochemical(M-E)interaction,the prediction model of corrosion depth is built with worn depth as the initial condition,and the prediction models of burst strength of the worn casing and corroded casing are obtained.Secondly,the accuracy of different prediction models is validated by numerical simulation,and the main influence factors on casing strength are obtained.At last,the theoretical models are applied to an ultra-deep well in Northwest China,and the dangerous well sections caused by wear and corrosion are predicted,and the corrosion rate threshold to ensure the safety of casing is obtained.The results show that the existence of wear defects results in a stress concentration and enhanced M-E interaction on corrosion depth growth.The accuracy of different mathematical models is different:the slot ring model is most accurate for predicting corrosion depth,and the eccentric model is most accurate for predicting the burst strength of corroded casing.The burst strength of the casing will be overestimated by more than one-third if the M-E interaction is neglected,so the coupling effect of wear and corrosion should be sufficiently considered in casing integrity evaluation.

Geochemical identification of a source rock affected by migrated hydrocarbons and its geological significance:Fengcheng Formation,southern Mahu Sag,Junggar Basin,NW China

The Fengcheng Formation is a crucial source rock and the primary reservoir for oil accumulation in the Mahu Sag.Crude oils are distributed throughout the Fengcheng Formation,ranging from the edge to the interior of the sag in the southern Mahu Sag.These crude oils originate from in-situ source rocks in shallowly buried areas and the inner deep sag.During migration,the crude oil from the inner deep sag affects the source rocks close to carrier beds,leading to changes in the organic geochemical characteristics of the source rocks.These changes might alter source rock evaluations and oil-source correlation.Based on data such as total organic carbon(TOC),Rock-Eval pyrolysis of source rocks,and gas chromatography-mass spectrometry(GC-MS)of the saturated fraction,and considering the geological characteristics of the study area,we define the identification characteristics of source rock affected by migrated hydrocarbons and establish the various patterns of influence that migrated hydrocarbons have on the source rock of the Fengcheng Formation in the southern Mahu Sag.The source rocks of the Fengcheng Formation are mostly fair to good,containing mainly Type II organic matter and being thermally mature enough to generate oil.Source rocks affected by migrated hydrocarbons exhibit relatively high hydrocarbon contents(S1/TOC>110 mg HC/g TOC,Extract/TOC>30%,HC:hydrocarbon),relatively low Rock-Eval Tmax values,and relatively high tricyclic terpane contents with a descending and mountain-shaped distribution.Furthermore,biomarker composition parameters indicate a higher thermal maturity than in-situ source rocks.Through a comparison of the extract biomarker fingerprints of adjacent reservoirs and mudstones in different boreholes,three types of influence patterns of migrated hydrocarbons are identified:the edge-influence of thin sandstone-thick mudstone,the mixed-influence of sandstone-mudstone interbedded,and the full-influence of thick sandstone-thin mudstone.This finding reminds us that the influence of migrated hydrocarbons must be considered when evaluating source rocks and conducting oil-source correlation.

Paleoenvironmental Characteristics of Paleogene Lacustrine Source Rocks in the Western Bozhong Sag,Bohai Bay Basin,China:Evidence from Biomarkers,Major and Trace Elements

The organic matter(OM)enrichment mechanisms and depositional environment characteristics of lacustrine source rocks in the western Bozhong Sag,Bohai Bay Basin in Northeast China remain controversial.To address these issues,based on Rock-Eval pyrolysis,kerogen macerals,H/C and O/C ratios,GC-MS,major and trace elements,the Dongying Formation Member(Mbr)3(E_(3)d_(3)),the Shahejie Formation mbrs 1 and 2(E_(2)s_(1+2)),and the Shahejie Mbr 3(E_(2)s_(3))source rocks in the western Bozhong Sag were studied.The above methods were used to reveal their geochemical properties,OM origins and depositional environments,all of which indicate that E_(2)s_(1+2)and E_(2)s_(3)are excellent source rocks,and that E_(3)d_(3)is of the second good quality.E_(3)d_(3)source rocks were formed under a warm and humid climate,mainly belong to fluvial/delta facies,the E_(3)d_(3)sediments formed under weakly oxidizing and freshwater conditions.Comparatively,the depositional environments of E_(2)s_(1+2)source rocks were arid and cold climate,representing saline or freshwater lacustrine facies,and the sediments of E_(2)s_(1+2)belong to anoxic or suboxic settings with large evaporation and salinity.During the period of E_(2)s_(3),the climate became warm and humid,indicating the freshwater lacustrine facies,and E_(2)s_(3)was characterized by freshwater and abundant algae.Moreover,compared with other intervals,the OM origin of E_(3)d_(3)source rocks has noticeable terrestrial input.The OM origin of the E_(2)s_(1+2)and E_(2)s_(3)are mainly plankton and bacteria.Tectonic subsidence and climate change have affected the changes of the depositional environment in the western Bozhong Sag,thus controlling the distribution of the source rocks,the geochemical characteristics in the three intervals of lacustrine source rocks have distinct differences.Overall,these factors are effective to evaluate the paleoenvironmental characteristics of source rocks by biomarkers,major and trace elements.The established models may have positive implications for research of lacustrine source rocks in offshore areas with few drillings.

Geochemical fingerprints and hydrocarbon potential of Paleocene mudrocks in the Tano Basin, Ghana: insights from biomarkers and stable carbon isotopes

The Paleocene mudrocks in Ghana’s Tano Basin have received limited attention despite ongoing efforts to explore hydrocarbon resources.A thorough geochemical analysis is imperative to assess these mudrocks’petroleum generation potential and formulate effective exploration strategies.In this study,a comprehensive geochemical analysis was carried out on ten Paleocene rock cuttings extracted from TP-1,a discovery well within the Tano Basin.Various analytical techniques,including total organic carbon(TOC)analysis,Rock–Eval pyrolysis,gas chromatography-mass spectrometry,and isotope ratio-mass spectrometry,were employed to elucidate their hydrocar-bon potential and organic facies.Thefindings in this study were subsequently compared to existing geochemical data on Paleocene source rocks in the South Atlantic marginal basins.The results indicated that the Paleocene samples have TOC content ranging from 0.68 to 2.93 wt%.The prevalent kerogen types identified in these samples were Type Ⅱ and Type Ⅲ.Molecular and isotope data suggest that the organic matter found in the Paleocene mudrocks can be traced back to land plants and lower aquatic organisms.These mudrocks were deposited in a transi-tional environment withfluctuating water salinity,charac-terized by sub-oxic redox conditions.Maturity indices,both bulk and molecular,indicated a spectrum of maturity levels within the Paleocene mudrocks,spanning from immature to marginally mature,with increasing maturity observed with greater depth.In comparison,the organic composition and depositional environments of Paleocene source rocks in the Tano Basin closely resemble those found in the Niger Delta Basin,Douala,and Kribi-Campo Basins,the Kwanza Formation in Angola,and certain Brazilian marginal basins.However,it is worth noting that Paleocene source rocks in some of the basins,such as the Niger Delta and Brazilian marginal basins,exhibit rela-tively higher thermal maturity levels compared to those observed in the current Paleocene samples from the Tano Basin.In conclusion,the comprehensive geochemical analysis of Paleocene mudrocks within Ghana’s Tano Basin has unveiled their marginal hydrocarbon generation potential.The shared geochemical characteristics between the Paleocene mudrocks in the Tano Basin and those in the nearby South Atlantic marginal basins offer valuable insights into source rock quality,which is crucial for shaping future strategies in petroleum exploration in this region.

Petroleum geology features and research developments of hydrocarbon accumulation in deep petroliferous basins

As petroleum exploration advances and as most of the oil-gas reservoirs in shallow layers have been explored, petroleum exploration starts to move toward deep basins, which has become an inevitable choice. In this paper, the petroleum geology features and research progress on oil-gas reservoirs in deep petroliferous basins across the world are characterized by using the latest results of worldwide deep petroleum exploration. Research has demonstrated that the deep petroleum shows ten major geological features. （1） While oil-gas reservoirs have been discovered in many different types of deep petroliferous basins, most have been discovered in low heat flux deep basins. （2） Many types of petroliferous traps are developed in deep basins, and tight oil-gas reservoirs in deep basin traps are arousing increasing attention. （3） Deep petroleum normally has more natural gas than liquid oil, and the natural gas ratio increases with the burial depth. （4） The residual organic matter in deep source rocks reduces but the hydrocarbon expulsion rate and efficiency increase with the burial depth. （5） There are many types of rocks in deep hydrocarbon reservoirs, and most are clastic rocks and carbonates. （6） The age of deep hydrocarbon reservoirs is widely different, but those recently discovered are pre- dominantly Paleogene and Upper Paleozoic. （7） The porosity and permeability of deep hydrocarbon reservoirs differ widely, but they vary in a regular way with lithology and burial depth. （8） The temperatures of deep oil-gas reservoirs are widely different, but they typically vary with the burial depth and basin geothermal gradient. （9） The pressures of deep oil-gas reservoirs differ significantly, but they typically vary with burial depth, genesis, and evolu- tion period. （10） Deep oil-gas reservoirs may exist with or without a cap, and those without a cap are typically of unconventional genesis. Over the past decade, six major steps have been made in the understanding of deep hydrocarbon reservoir formation. （1） Deep petroleum in petroliferous basins has multiple sources and many dif- ferent genetic mechanisms. （2） There are high-porosity, high-permeability reservoirs in deep basins, the formation of which is associated with tectonic events and subsurface fluid movement. （3） Capillary pressure differences inside and outside the target reservoir are the principal driving force of hydrocarbon enrichment in deep basins. （4） There are three dynamic boundaries for deep oil-gas reservoirs; a buoyancy-controlled threshold, hydrocarbon accumulation limits, and the upper limit of hydrocarbon generation. （5） The formation and distribution of deep hydrocarbon res- ervoirs are controlled by free, limited, and bound fluid dynamic fields. And （6） tight conventional, tight deep, tight superimposed, and related reconstructed hydrocarbon reservoirs formed in deep-limited fluid dynamic fields have great resource potential and vast scope for exploration. Compared with middle-shallow strata, the petroleum geology and accumulation in deep basins are more complex, which overlap the feature of basin evolution in different stages. We recommend that further study should pay more attention to four aspects： （1） identification of deep petroleum sources and evaluation of their relative contributions; （2） preservation conditions and genetic mechanisms of deep high-quality reservoirs with high permeability and high porosity; （3） facies feature and transformation of deep petroleum and their potential distribution; and （4） economic feasibility evaluation of deep tight petroleum exploration and development.

Status quo of soil petroleum contamination and evolution of bioremediation

Along with the rapid development of oil industries internationally,petroleum prospecting and exploitation activities are growing intensively.Especially in China,with the fastest economic growth in the world and shortage of petroleum resources,we are leading the practices of petroleum deep exploitation.Obviously,the risk of damage to the natural environment from these activities is high.Oil contamination in soils and groundwater is becoming a big issue along with pesticide pollution,which makes organic pollution prevention and control （OPPC） much more complex.In this paper,based on recent research on oil-contaminated soil at home and abroad,we make comments on the remediation technologies for polluted soil,emphasizing bioremediation techniques and degradation mechanisms in order to push forward research into bound organic pollution prevention and control （OPPC）,especially in China.

Whole petroleum system and ordered distribution pattern of conventional and unconventional oil and gas reservoirs

The classical source-to-trap petroleum system concept only considers the migration and accumulation of conventional oil and gas in traps driven dominantly by buoyance in a basin,although revised and improved,even some new concepts as composite petroleum system,total petroleum system,total composite petroleum system,were proposed,but they do not account for the vast unconventional oil and gas reservoirs within the system,which is not formed and distributed in traps dominantly by buoyancedriven.Therefore,the petroleum system concept is no longer adequate in dealing with all the oil and gas accumulations in a basin where significant amount of the unconventional oil and gas resources are present in addition to the conventional oil and gas accumulations.This paper looked into and analyzed the distribution characteristics of conventional and unconventional oil/gas reservoirs and their differences and correlations in petroliferous basins in China and North America,and then proposed whole petroleum system(WPS)concept,the WPS is defined as a natural system that encompasses all the conventional and unconventional oil and gas,reservoirs and resources originated from organic matter in source rocks,the geological elements and processes involving the formation,evolution,and distribution of these oil and gas,reservoirs and resources.It is found in the WPS that there are three kinds of hydrocarbons dynamic fields,three kinds of original hydrocarbons,three kinds of reservoir rocks,and the coupling of these three essential elements lead to the basic ordered distribution model of shale oil/gas reservoirs contacting or interbeded with tight oil/gas reservoirs and separated conventional oil/gas reservoirs from source rocks upward,which is expressed as“S\T-C”.Abnormal conditions lead to other three special ordered distribution models:The first is that with shale oil/gas reservoirs separated from tight oil/gas reservoirs.The second is that with two direction ordered distributions from source upward and downward.The third is with lateral distribution from source outside.

Preferential petroleum migration pathways and prediction of petroleum occurrence in sedimentary basins:A review

The aim of this paper is to review the major points of contention concerning secondary petroleum migration, to discuss the nature and primary controls of the positions of petroleum migration pathways in sedimentary basins, and to illustrate the importance of preferential petroleum migration pathways for the formation of large oil/gas fields away from generative kitchens. There is competition between the driving force （buoyancy） and the restraining force （capillary pressure controlled largely by permeability contrast） in controlling the positions of petroleum migration pathways in heterogeneous carrier beds. At a large scale, there is a critical angle of dip of the carrier beds which determines the relative importance of structural morphology or permeability contrasts in controlling the positions of petroleum migration pathways in heterogeneous carrier beds. Maximum-driving-force-controlled migration pathways occur in carrier beds with an angle of dip greater than the critical dip and the positions of petroleum migration pathways are controlled mainly by the morphology of the sealing surfaces. Minimum-restraining-force-determined migration pathways occur in carrier beds with an angle of dip smaller than the critical angle where permeability contrasts would exert a more important influence on the positions of petroleum migration pathways. Preferential petroleum migration pathways （PPMP）, defined as very restricted portions of carrier-beds that focus or concentrate petroleum from a large area of the generative kitchen, determine the distribution of oil and gas in sedimentary basins. The focusing of petroleum originating from a large area of the generative kitchens into restricted channels seems to be essential not only for long-range petroleum migration in hydrostatic conditions, but also for the formation of large oil or gas fields. Regions may miss out on petroleum migration because of its three-dimensional behavior, and two-dimensional migration modeling may be misleading in predicting petroleum occurrences in certain circumstances.

Hydrocarbon expulsion model and resource potential evaluation of high-maturity marine source rocks in deep basins:Example from the Ediacaran microbial dolomite in the Sichuan Basin,China

Hydrocarbon expulsion features and resource potential evaluation of source rocks are crucial for the petroleum exploration.High-maturity marine source rocks have not exhibited a hydrocarbon expulsion mode owing to the lack of low-maturity source rocks in deep petroliferous basins.We considered the Ediacaran microbial dolomite in the Sichuan Basin,the largest high-maturity marine gas layer in China,to exhibit a method that quantitatively characterizes the hydrocarbon expulsion of high-maturity marine source rocks.The experiment of fluid inclusion,rock pyrolysis,and vitrinite reflectance(Ro)of 119 microbial dolomite core samples obtained from the Dengying Formation were performed.A hydrocarbon expulsion model of high-maturity source rock was established,and its resource potential was evaluated.The results showed that the Ediacaran microbial dolomite in the Sichuan Basin is a good source rock showing vast resource potential.The hydrocarbon expulsion threshold is determined to be vitrinite reflectance at 0.92%.The hydrocarbon expulsion intensities in the geologic history is high with maximum of 1.6×10^(7)t/km^(2).The Ediacaran microbial dolomite expelled approximately 1.008×10^(12)t of hydrocarbons,and the recoverable resource was 1.5×10^(12)m^(3).The region can be categorized into areasⅠ,Ⅱ,Ⅲ,andⅣ,in decreasing order of hydrocarbon expulsion intensity.Areas with a higher hydrocarbon expulsion intensity have a lower drilling risk and should be prioritized for exploration in the orderⅠ>Ⅱ>Ⅲ>Ⅳ.Two areas,northern and central parts of Ediacaran in the Sichuan Basin,were selected as prospects which had the drilling priority in the future gas exploration.The production data of 55 drilled wells verified the high reliability of this method.This model in this study does not require low-maturity samples and can be used for evaluating high-maturity marine source rocks,which has broad applicability in deep basins worldwide.

Research progress and challenges of natural gas hydrate resource evaluation in the South China Sea

As an efficient clean energy,natural gas hydrate(NGH)has become a hot topic in recent researches.Since1990 s,China has made great achievements and progress in NGH exploration in the South China Sea(SCS),including determination of the favorable distribution areas and favorable strata thickness,identification of the dual source for accumulation,evaluation of the prospective gas contents,verification of the widespread existence,and confirmation of the technical recoverability of NGH resources.However,there are three major challenges in the NGH studies.First,all the 24 national key and major projects in the SCS focused on trial production engineering and geological engineering in the past 20 years,while 8 of the 10 international NGH research projects focused on resource potential.Second,resource evaluation methods are outdated and some parameter selection are subjective.Third,the existing resource evaluation results are low-level with a great uncertainty,and cannot be used to guide NGH exploration and production or strategic research.To improve the evaluation of NGH resources in the SCS,future researches should focus on four aspects:(1)improve the research on the criterion of the objective existence of NGH and the method of prediction and evaluation;(2)apply new theories and methods from the global NGH research;(3)boost the research on the difference and correlation of the conditions of hydrocarbon migration and accumulation in different basins;(4)innovate the theory and method of NGH resource potential evaluation.

Distribution and resource evaluation of natural gas hydrate in South China sea by combing phase equilibrium mechanism and volumetric method

China Geological Survey conducted the second trial production of natural gas hydrate(NGH)in the Shenhu Area in South China Sea(SCS)from 2019 to 2020.Compared with the first trial production in 2017,the second trial showed significantly increased daily gas production and total gas production,and removed some technical obstacles for large-scale NGH resource developments in the SCS.However,current NGH resource evaluation in the SCS is still at the stage of prospective gas content assessment,which is unable to guide further NGH exploration and development.This study utilized the hydrate phase balance to delineate the NGH distribution range and effective thickness and volumetric method to evaluate NGH resource.Based on the latest exploration and production data from the Shenhu Area,Monte Carlo simulation was performed to calculate the NGH resource amount with different probabilities.By assuming a 50%cumulative probability,the in-situ NGH resources in the SCS was estimated to be11.7×10^(12)m^(3) and the recoverable NGH resources was 2.8×10^(12)m^(3).These results will provide a more reliable resource basis for China to formulate comprehensive development strategies for oil and gas exploration in the SCS.

Influence of Magmatic Intrusion on Abnormal Hydrocarbon Generation and Expulsion of Source Rock:A Case Study of the Dongying Sag,Bohai Bay Basin

How gabbro affects the generation and expulsion of hydrocarbons in muddy surrounding rocks is clarified by analyzing thin section,major and trace elements,total organic carbon(TOC),pyrolysis,extracts and vitrinite reflectance data from source rocks in the Chunxi area the Dongying Sag,Bohai Bay Basin,eastern China.The results show that a magma intrusion brings copious heat to the source rocks,which promotes abnormal maturation of organic matter(OM)and rapid hydrocarbon generation.The CH_(4)and H_(2)produced by gabbro alteration play a role in hydrocarbon generation of source rocks.The hydrothermal process during magma intrusion provides many different minerals to the source rock,resulting in carbonate-rich surrounding mudstone.The carbonate and clay minerals produced by volcanic mineral alteration jointly catalyze the hydrocarbon generation of the source rock.The high-temperature baking of the intrusion results in hydrothermal pressurization and hydrocarbon generation pressurization,causing many fractures in the surrounding rock.The generated oil and gas are discharged through the fractures under diffusion and pressure.Mantle-derived CO_(2)is also conducive to the expulsion of hydrocarbons because of its strong enrichment capacity for hydrocarbons.

Alteration and Reformation of Hydrocarbon Reservoirs and Prediction of Remaining Potential Resources in Superimposed Basins

Complex hydrocarbon reservoirs developed widely in the superimposed basins of China formed from multiple structural alterations, reformation and destruction of hydrocarbon reservoirs formed at early stages. They are characterized currently by trap adjustment, component variation, phase conversion, and scale reformation. This is significant for guiding current hydrocarbon exploration by revealing evolution mechanisms after hydrocarbon reservoir formation and for predicting remaining potential resources. Based on the analysis of a number of complex hydrocarbon reservoirs, there are four geologic features controlling the degree of destruction of hydrocarbon reservoirs formed at early stages： tectonic event intensity, frequency, time and caprock sealing for oil and gas during tectonic evolution. Research shows that the larger the tectonic event intensity, the more frequent the tectonic event, the later the last tectonic event, the weaker the caprock sealing for oil and gas, and the greater the volume of destroyed hydrocarbons in the early stages. Based on research on the main controlling factors of hydrocarbon reservoir destruction mechanisms, a geological model of tectonic superimposition and a mathematical model evaluating potential remaining complex hydrocarbon reservoirs have been established. The predication method and technical procedures were applied in the Tazhong area of Tarim Basin, where four stages of hydrocarbon accumulation and three stages of hydrocarbon alteration occurred. Geohistorical hydrocarbon accumulation reached 3.184 billion tons, of which 1.271 billion tons were destroyed. The total volume of remaining resources available for exploration is -1.9 billion tons.

Distribution and geochemical significance of alkylbenzenes for crude oil with different depositional environments and thermal maturities

A total of 45 alkylbenzenes were detected and identified in crude oils with different depositional environments and thermal maturities from the Tarim Basin,Beibuwan Basin,and Songliao Basin using comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry(GC×GCTOFMS).By analyzing the distribution characteristics of C0-C5alkylbenzenes,it is found that the content of some alkylbenzenes varies greatly in crude oils.Based on the distribution characteristics of 1,2,4,5-tetramethylbenzene(Te MB)and 1,2,3,4-Te MB,the ratio of 1,2,4,5-Te MB to 1,2,3,4-Te MB is proposed to indicate the organic matter origin and depositional environment of ancient sediments.Oil samples originated mainly from lower hydrobiont,algae,bacteria and source rocks deposited under reducing/anoxic conditions have low 1,2,4,5-/1,2,3,4-Te MB values(less than 0.6),while oil samples originated mainly from terrestrial higher plants and source rocks deposited under oxic/sub-oxic conditions have higher 1,2,4,5-/1,2,3,4-Te MB values(greater than 1.0).The significant difference of 1,2,4,5-/1,2,3,4-Te MB values is controlled by 1,2,4,5-Te MB content.1,2,4,5-Te MB content in oils derived from source rocks deposited in oxidized sedimentary environment(greater than 1.0 mg/g whole oil)is higher than that in oils from source rocks deposited in reduced sedimentary environment(less than 1.0 mg/g whole oil).1,2,4,5-/1,2,3,4-Te MB ratio might not or slightly be affected by evaporative fractionation,biodegradation and thermal maturity.1,2,4,5-/1,2,3,4-Te MB ratio and 1,2,4,5-Te MB content can be used as supplementary parameter for the identification of sedimentary environment and organic matter input.It should be noted that compared to the identification of organic matter sources,the 1,2,4,5-/1,2,3,4-Te MB parameter is more effective in identifying sedimentary environments.

Interpretation and characterization of rate of penetration intelligent prediction model

Accurate prediction of the rate of penetration(ROP)is significant for drilling optimization.While the intelligent ROP prediction model based on fully connected neural networks(FNN)outperforms traditional ROP equations and machine learning algorithms,its lack of interpretability undermines its credibility.This study proposes a novel interpretation and characterization method for the FNN ROP prediction model using the Rectified Linear Unit(ReLU)activation function.By leveraging the derivative of the ReLU function,the FNN function calculation process is transformed into vector operations.The FNN model is linearly characterized through further simplification,enabling its interpretation and analysis.The proposed method is applied in ROP prediction scenarios using drilling data from three vertical wells in the Tarim Oilfield.The results demonstrate that the FNN ROP prediction model with ReLU as the activation function performs exceptionally well.The relative activation frequency curve of hidden layer neurons aids in analyzing the overfitting of the FNN ROP model and determining drilling data similarity.In the well sections with similar drilling data,averaging the weight parameters enables linear characterization of the FNN ROP prediction model,leading to the establishment of a corresponding linear representation equation.Furthermore,the quantitative analysis of each feature's influence on ROP facilitates the proposal of drilling parameter optimization schemes for the current well section.The established linear characterization equation exhibits high precision,strong stability,and adaptability through the application and validation across multiple well sections.

Formation and Evolution Mechanism of High-quality Reservoirs in the Lacustrine Hyperpycnal System:The 2nd Member of the Lower Jurassic Sangonghe Formation,Qiudong Subsag,Turpan-Hami Basin,NW China

Hyperpycnal deposits has gradually emerged as a current research hotspot,with a special focus on lacustrine hyperpycnal deposits.However,our understanding of the formation mechanism and distribution of high-quality reservoirs in hyperpycnal deposits remains insufficient.In this study,the formation mechanism and distribution of high-quality reservoirs in the second member of the Sangonghe Formation are studied through sedimentology,petrology,and geochemistry,and 10 types of lithofacies were identified in the depositional sequences of the hyperpycnal flow.These can be summarized as gravelly bed to suspended load lithofacies association(GBS),gravelly reverse to normal compound-graded(GNR),coarse-grained sandy suspended load(CSS),and fine-grained sandy suspended load(FSS)lithofacies associations.The hyperpycnal system can be divided into four individual units:restricted channel,unrestricted channel,lobe,and levee.The reservoir quality varies with lithofacies.Gravelly bed load lithofacies has coarse grain sizes,high content of rigid minerals,and soluble components,such as magmatic rock fragments.Therefore,the gravelly bed load lithofacies reservoir has developed dissolution pores and well-preserved pore throats.Its reservoir quality is good.GBS and GNR are the main lithofacies associations in the restricted channel,where type I and type II reservoirs developed.The unrestricted channel is dominated by the CSS lithofacies association,with type III reservoirs developed.The lobe is dominated by the CSS and FSS lithofacies associations,with type III and type IV reservoirs developed.High-quality reservoirs mainly develop in the restricted and unrestricted channels,whereas reservoirs in the lobe have poor quality.The levees are dominated by siltstone and gray mudstone and are generally nonreservoirs.

Theoretical insights into thermal transport and structural stability mechanisms of triaxial compressed methane hydrate

The heat transfer and stability of methane hydrate in reservoirs have a direct impact on the drilling and production efficiency of hydrate resources,especially in complex stress environments caused by formation subsidence.In this study,we investigated the thermal transport and structural stability of methane hydrate under triaxial compression using molecular dynamics simulations.The results suggest that the thermal conductivity of methane hydrate increases with increasing compression strain.Two phonon transport mechanisms were identified as factors enhancing thermal conductivity.At low compressive strains,a low-frequency phonon transport channel was established due to the overlap of phonon vibration peaks between methane and water molecules.At high compressive strains,the filling of larger phonon bandgaps facilitated the opening of more phonon transport channels.Additionally,we found that a strain of0.04 is a watershed point,where methane hydrate transitions from stable to unstable.Furthermore,a strain of0.06 marks the threshold at which the diffusion capacities of methane and water molecules are at their peaks.At a higher strain of0.08,the increased volume compression reduces the available space,limiting the diffusion ability of water and methane molecules within the hydrate.The synergistic effect of the strong diffusion ability and high probability of collision between atoms increases the thermal conductivity of hydrates during the unstable period compared to the stable period.Our findings offer valuable theoretical insights into the thermal conductivity and stability of methane hydrates in reservoir stress environments.

New model of linkage evolution for the transtensional fault systems in the Nanpu Sag of Bohai Bay Basin:Insight from seismic interpretation and analogue modelling

The evolution of faults within the same stress field is frequently influenced by numerous factors,involving the reactivation of pre-existing structures,stress transmission through ductile detachment layers,and the growth,interaction,as well as linkage of new fault segments.This study analyses a complex multi-phase oblique extension fault system in the Nanpu Sag(NPS)of the Bohai Bay Basin(BBB),China.High-resolution three-dimensional(3D)seismic data and analogue modelling indicate that the oblique extensional reactivation of pre-existing structures governs the sequential arrangement of fault segments in the caprock,and they dip synthetically to the reactivated fault at depth.During the NW-SE extension in the Eocene,the predominant movement of the pre-existing fault is strike-slip.Subsequently,during the N-S extension since the Oligocene,inclined at 20.to the pre-existing fault,forming splay fault segments and ultimately creating large en-echelon arcuate faults linked by relay ramps.Using fault throw-distance(T-D)and laser scanning,we reconstructed the fault evolution model of oblique extension reactivation in the presence of a ductile detachment basement.Our study illustrates that the arcuate faults can be categorized into linear master fault segments controlled by pre-existing structures,bending splay faults in the termination zone,and normal fault segments responding to the regional stress field.The interaction between faults occurs among normal faults and strike-slip faults,and the kinematic unification of the two fault systems is accomplished in the intersection zone.As the faults continue to evolve,the new fault segments tend to relinquish the control of pre-existing structures and concentrate more on the development of planar and continuous major faults.The ductile detachment layer significantly contributes to the uniform distribution of strain,resulting in narrow shear zones and discontinuous normal faults in its absence.