Impact of Bubbles on Mechanical Performances in a Borosilicate Glass

To analyze the impact of bubbles on the mechanical behavior of glasses,by controlling the refining time,we prepared three borosilicate glasses with the same composition and different porosity.By the analysis software integrated within the optical microscope,the diameter and number of the bubbles on the surface of three borosilicate glasses were quantified.From the hardness and crack initiation resistance(CR),we built the relationship between the porosity and the mechanical performance of these borosilicate glasses.

Preparation, Crystallization and Mechanical Properties of Potassium Aluminosilicate Glass-ceramics

In this study,transparent K_(2)O-Al_(2)O_(3)-SiO_(2)(KAS)glass-ceramics with leucite as the main crystalline phase were prepared by melting-quench method and two-step heat treatment.The effects of SiO_(2)/Al_(2)O_(3) ratio and heat treatment on crystallization and mechanical properties were studied.The crystallization kinetics and X-Ray Diffraction(XRD)results showed that SiO_(2)/Al_(2)O_(3) ratio and heat treatment system had a direct impact on the crystallization behavior of potassium aluminosilicate glass-ceramics.When heat-treated at 680℃/2 h and 780℃/1 h,cracks generated on the surface of the sample with the addition of SiO_(2)/Al_(2)O_(3)=4.8(in mol)due to the huge difference in the coefficient of thermal expansion between glass matrix and surface.When the addition of SiO_(2)/Al_(2)O_(3)(in mol)was 4,the sample with leucite as the main crystalline phase showed an excellent fracture toughness(1.46 MPa·m^(0.5))after the heat treatment of 680℃/2 h and 780℃/5 h.And there was a phase transformation from kaliophilite to leucite.The crystalline phases of the sample heat-treated at 680℃/8 h and 780℃/1 h were leucite and kaliophilite,which resulted in the visible light transmittance of 63%and the fracture toughness of 0.91 MPa·m^(0.5).Furthermore,after the heat treatment of 680℃/2 h and 780℃/5 h,the main crystalline phase of the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol)was still kaliophilite.Because leucite only grows on the surface of the sample and is hard to grow inward,it is hard to achieve the bulk crystallization of leucite in the sample with SiO_(2)/Al_(2)O_(3)=3.2(in mol).

Carbonation of Dicalcium Silicate Enhanced by Ammonia Bicarbonate and Its Mechanism

The strength development law of γ-type dicalcium silicate (γ-C_(2)S) under different carbonation processes was investigated,and the carbonation mechanism of γ-C_(2)S under the action of NH_(4)HCO_(3) was clarified by using a wide range of test methods,including XRD and SEM.A method of saturated NH_(4)HCO_(3) solution as a curing agent was identified to improve the carbonation efficiency and enhance the carbonation degree of γ-C_(2)S,and then a high-strength carbonated specimen was obtained.Microhardness analysis and SEM morphology analysis were conducted on the carbonised specimens obtained under atmospheric pressure carbonisation conditions using the curing agent.It was found that γ-C_(2)S could perform carbonisation well under atmospheric pressure,which promoted the carbonisation efficiency and decreased the carbonisation cost simultaneously.Therefore,a new carbonisation process solution was proposed for the rapid carbonisation of γ-C_(2)S.

Towards green asphalt materials with lower emission of volatile organic compounds: A review on the release characteristics and its emission reduction additives

Recently, researchers in the road field are focusing on the development of green asphalt materials with loweremission of volatile organic compounds (VOCs). The characterization methodology of asphalt VOCs and theinfluencing factors on VOCs release have always been the basic issue of asphalt VOCs emission reduction research.Researchers have proposed a variety of asphalt VOCs characterization methodologies, which also have mutuallyirreplaceable characteristics. Asphalt VOCs volatilization is affected by many factors. In this study, asphalt VOCscharacterization methodologies were summarized, including their advantages, disadvantages, characteristics andapplicable requirements. Subsequently, the influencing factors of VOCs release, such as asphalt types and environment conditions, are summarized to provide theoretical support for the emission reduction research. Theclassification and mechanism of newly-development asphalt VOCs emission reduction materials are reviewed. Thereduction efficiencies are also compared to select better materials and put forward the improvement objective ofnew materials and new processes. In addition, the prospects about development of VOCs release mechanism ofasphalt materials during the full life cycle and feasibility research of high-efficiency composite emission reductionmaterials in the future were put forward.

Effect of Bi/Si Ratio of BiBSi Glass on Its Structure, Properties and Laser Sealing Shear Strength for Vacuum Glazing

The low-melting glass of Bi2O_(3)-B2O_(3)-SiO_(2)(BiBSi)system was used for the first time for laser sealing of vacuum glazing.Under the condition of constant boron content,how the structure and properties vary with Bi/Si ratio in low-melting glass was investigated.In addition,the relationships between laser power,low-melting glass solder with different Bi/Si ratios and laser sealing shear strength were revealed.The results show that a decrease in the Bi/Si ratio can cause a contraction of the glass network of the low-melting glass,leading to an increase of its characteristic temperature and a decrease of its coefficient of thermal expansion.During laser sealing,the copper ions in the low-melting glass play an endothermic role.A change in the Bi/Si ratio will affect the valence state transition of the copper ions in the low-melting glass.The absorbance of the low-melting glass does not follow the expected correlation with the Bi/Si ratio,but shows a linear correlation with the content of divalent copper ions.The greater the concentration of divalent copper ions,the greater the absorbance of the low-melting glass,and the lower the laser power required for laser sealing.The shear strength of the low melting glass solder after laser sealing was tested,and it was found that the maximum shear strength of Z1 glass sample was the highest up to 2.67 MPa.

Effect of Calcium Silicate Hydrate Seeds on Hydration and Mechanical Properties of Cement

C-S-H series are synthesized at different temperatures and ages by pozzolanic reaction.The change of particle size distribution,phase composition,morphology and nanostructure of C-S-H with temperatures and ages,and the effects of C-S-H seeds and seeds parameters on the hydration behavior and mechanical properties development of cement were investigated by DLS,XRD,SEM,^(29)Si NMR,TAM-air isothermal calorimeter and mechanical properties test.The results show that the particle size,crystallinity,basal spacing and Q^(2)/Q^(1) ratio of C-S-H increases with the increase of synthesis temperature and age.The addition of synthesized C-S-H seeds to cement pastes results in the strong acceleration effect on cement hydration and significant improvement of the early strength of cement paste and mortar.The 1 day-C-S-H seeds synthesized at room temperature can increase the strength of cement paste by about 30 MPa at 12 h.The effect does not show a very regular change with the increase of the temperature and age of seeds synthesis.Considering the effect of C-S-H seeds on the hydration and mechanical properties of cement,and economy and short cycle of seeds synthesis,the C-S-H seeds synthesized at room temperature for 1 day or 55 ℃ water bath for 12 hours is recommended..

Effect of Nucleating Agents and Heat Treatments on the Crystallization of Magnesium Aluminosilicate Transparent Glass-ceramics

The crystallization behavior and transparent property of MgO-A1203-SiO2 （MAS） glasses with TiO2 and TiO2＋ZrO2 as nucleating agents were discussed by differential thermal analysis, X-ray diffraction, field emission-environment scanning electron microscope, energy dispersive spectrum and UV-VIS-NIR scanning spectrophotometer. It was found that the glass crystallized at 950 ℃ with ZrO2 less than 3% could obtain transparent glass ceramic, which presented purple to colorless. With the nucleating agent additives （5% TIO2＋3% ZrO2）, the colorless transparent glass-ceramics with spinel as the main crystal phase could be prepared, and the transmittance reached about 80%. As the crystallized temperature increase to 1 000 ℃, besides spinel（MgA1204）, sapphirine （Mg3.5A19Si1.5O20） and ZrTiO4 precipitated from matrix glass, and the transmitance of glass-ceramic decreased.

Effect of Polymer on Morphology and Structure of Calcium Silicate Hydrate Prepared via Precipitation Method

The effects of polyaerylamide （PAM） and polyvinyl alcohol （PVA） on morphology and structure of calcium silica~ hydrate with C/S 1.0-1.7 prepared via precipitation in solution were investigated by XRD, FT-IR and TEM techniques. The results show that incorporation of the polymers decreased the order degree, increased the interlayer spacing and disturbed the layered stacking of C-S-H. Interlayer spacing expansion depended on C/S ratios and type of polymer. Interlayer spacing expansion had a minimum at C/S 1.0 and a maximum at C/S 1.3 and 1.5. Interlayer spacing expansion of PAM was bigger than that of PVA with the same C/S. C-S-H added with PVA mainly exhibited foil-like and fibrillar morphology. The fibrils were of variable length from a few tens of nanometers to a few hundreds of nanometers. Fibrils or foils seemed to be longer in the presence of PVA.

Crystallization Behavior and Kinetics of Lithium Aluminosilicate Glasses with Various Li_(2)O Contents

The crystallization behavior of Li_(2)O-Al_(2)O_(3)-SiO_(2) glasses with various concentration of Li2O were investigated by DSC,XRD,and FE-SEM.The h/l-quartz s.s.is the main crystalline phase for all of the glass with the heat treatment of 720℃/3 h+800℃/1.5 h while the crystallinity and crystal size increase with the increase of Li2O contents.Due to the negative thermal expansion coefficient of h/l-quartz s.s.,the thermal expansion coefficient of glass-ceramics decreases with the increasing of Li2O contents.When the Li2O content is 9mol%,the near-zero CTE20-700℃=-0.09×10^(-6)℃^(-1) is obtained upon the heat treatment of 720℃/3 h+800℃/1.5 h.The crystallization activation energy of the glass with 9mol%Li2O is about 351 kJ/mol,and the crystallization mechanism is volume crystallization.

Versatile Surface Modification of Ceramsite Via Honeycomb Calcium-aluminum-silicate-hydrate and Its Functionalization by 3-thiocyanatopropyltriethoxysilane for Enhanced Cadmium(Ⅱ) Removal

A low-cost and efficient filter medium for Cd(Ⅱ) removal was prepared by anchoring-SCN functional groups(by 3-thiocyanatopropyltriethoxysilane, TCPS) on ceramsite via the approach of synthesizing a honeycomb calciumaluminum-silicate-hydrate(C-A-S-H) layer as intermediate. The specific surface area of ceramsite was increased enormously by more than 50 times because of the modification of honeycomb layer. Moreover, the abundant Si-OH bonds existing in the structure of CAS-H can serve as active sites for TCPS. The combined effects ensure that the hybrid filter medium(named ceramsite/C-A-S-H/TCPS) demonstrated a high Cd(Ⅱ) adsorption capacity of 18.27 mg·g^-1 for particle size of 0.1-0.6 mm, 12.63 mg·g^-1 for 0.6-1.25 mm and 8.64 mg·g^-1 for 1.25-2.35 mm. The Cd(Ⅱ) adsorption capacity per unit area of ceramsite/C-A-S-H/TCPS(0.1-0.6 mm) is up to 4.07 mg·m^-2, which is much higher than that of many nano-adsorbents. In addition, ceramsite/C-AS-H/TCPS could maintain a high removal efficiency(> 85%) in a wide range of p H 3-11 and showed excellent selectivity in the presence of competing ions. Furthermore, Cd(Ⅱ) could be desorbed from ceramsite/C-A-S-H/TCPS composites with nearly 100%, suggesting the potential application in recycling of heavy metal ions.

Research on the Low-carbon Cementitious Materials:Effect of Triisopropanolamine on the Hydration of Phosphorous Slag and Steel Slag

Cement,phosphorous slag(PS),and steel slag(SS)were used to prepare low-carbon cementitious materials,and triisopropanolamine(TIPA)was used to improve the mechanical properties by controlling the hydration process.The experimental results show that,by using 0.06%TIPA,the compressive strength of cement containing 60%PS or 60%SS could be enhanced by 12%or 18%at 28 d.The presence of TIPA significantly affected the hydration process of PS and SS in cement.In the early stage,TIPA accelerated the dissolution of Al in PS,and the formation of carboaluminate hydrate was facilitated,which could induce the hydration;TIPA promoted the dissolution of Fe in SS,and the formation of Fe-monocarbonate,which was precipitated on the surface of SS,resulting in the postponement of hydration,especially for the high SS content.In the later stage,under the continuous solubilization effect of TIPA,the hydration of PS and SS could refine the pore structure.It was noted that compared with portland cement,the carbon emissions of cement-PS-TIPA and cement-SS-TIPA was reduced by 52%and 49%,respectively.

Fabrication of Al_2O_3-NaCl Composite Heat Storage Materials by One-step Synthesis Method

Thermal energy storage is an attractive option for effectiveness since it gives flexibility and reduces energy consumption and costs. New composite materials for storage and transformation of heat of NaCl-Al2O3composite materials were synthesized by one-step synthesis method. The chemical composition, morphology, structure, and thermal properties were investigated by XRD, EDS, SEM, and DSC. The results show that NaCl can be absorbed by Al2O3particle from 800 to 900 ℃ for Al2O3particle surface is rich active structure. The results also indicate that the leakage of NaCl when the phase change can be prevented by Al2O3particles and the enthalpy of phase change of NaCl-Al2O3material is 362 J/g. The composites have an excellent heat storage capacity. Therefore, this study contributes to one new thought and method to prepare high temperature heat storage material and this material can be applied in future thermal engineering.

Influence of Alkalis Doping on the Hydration Reactivities of Tricalcium Silicate

Influences of alkali oxides doping on the crystal structure, defects and hydration behavior of tricalcium silicate C_3S were investigated by X-ray powder diffraction with the Rietveld method, inductively coupled plasma optical emission spectroscopy, thermoluminescence and isothermal calorimetry. All the samples were stabilized as T1 form C_3S. Changes in the crystal structure of C_3S could mainly be monitored by changes in lattice parameters, which were closely correlated with the incorporation concentration and substitution types of alkalis. Although alkalis were incorporated at trace level in C_3S, the thermoluminescence and hydration behavior of C_3S were significantly influenced. Initial hydration activity was dramatically increased and highly related to the intensity of the irradiation-induced thermoluminescence peaks at low temperatures due to their direct correlation with defects. The oxygen vacancy sites resulting from the substitution of alkalis for Ca could readily account for the acceleration of the initial hydration of C_3S.

Network Structure and Chemical Durability of Non-alkali Aluminoborosilicate Glasses Containing ZnO

The structure and chemical durability of non-alkali aluminoborosilicate glasses with various contents of ZnO were investigated.As the replacement of MgO by ZnO increases from 0 to 3.2mol%,the average number of bridge oxygen per tetrahedron (BO/T) as a measure of network connectivity increases from 2.84 to 3.04,and the chemical durability improved.The weight loss ratio (WLR) of glass etched in 10vol% HF (20 ℃,20 min) solution decreased from 4.809 to 4.509,and in 5wt% NaOH (95 ℃,6 h) solution decreased from 1.201 to 0.994.The replacement of MgO by ZnO further increased to 6.4mol%,the value of BO/T decreased to 3.04 instead,and thus the chemical durability deteriorated.The WLR of HF-acid and NaOH-alkali corrosion increased to 6.683 and 1.994,respectively.The chemical durability shows strongly dependent on the network connectivity and exhibits mixed intermediate effects during the replacement of MgO by ZnO.

Use of Different Barium Salts to Inhibit the Thaumasite Form of Sulfate Attack in Cement-based Materials

We investigated the effects of different barium compounds on the thaumasite form of sulphate attack（TSA）resistance of cement-based materials when they were used as admixtures in mortars.Moreover,we analyzed the inhibition mechanisms within different types of barium salts,namely BaCO_3 and Ba（OH）_2,on the thaumasite formation.The controlcement mortar and mortars with barium salts to cement and limestone weight ratios of 0.5%,1.0%,and 1.5% were immersed in 5%（by weight）MgSO_4 solution at 5 ℃ to mimic TSA.Appearance,mass,and compressive strength of the mortar samples were monitored and measured to assess the generaldegradation extent of these samples.The products of sulphate attack were further analyzed by XRD,FTIR,and SEM,respectively.Experimentalresults show that different degradation extent is evident in allmortars cured in MgSO_4 solution.However,barium salts can greatly inhibit such degradation.Barium in hydroxide form has better effectiveness in protection against TSA than carbonate form,which may be due to their solubility difference in alkaline cement pore solution,and the presence of these barium compounds can reduce the degree of TSA by comparison with the almost completely decomposed controlsamples.

Degradation of Formaldehyde and Benzene by TiO2 Photocatalytic Cement Based Materials

A novel photocatalytic cement based material was prepared. The distribution of TiO2 on the surface of cement was characterized by scanning electron microscope（SEM） and X-ray diffraction（XRD）, which showed the relationship of photocatalysis and presence of TiO2. TiO2 also had an impact on cement hydration, which was studied by thermal analysis. With 300 W UV illuminations, formaldehyde and benzene were degraded efficiently by the prepared photocatalytic cement based materials. 15wt% TiO2/cement showed the highest degradation efficiency and capability. The results show that formaldehyde and benzene can be degraded within 4 and 9 hours, respectively. Besides, inorganic ions can induce TiO2 agglomeration. As a result, the presence of inorganic ions in cement is unfavorable for degradation. The photocatalytic cement based materials were fabricated and the degradation efficiency of formaldehyde was measured on building roof under sunlight illumination. Formaldehyde in glass chamber can be degraded thoroughly within 10 days.

Effect of Silica Fume on the Thaumasite Form of Sulfate Attack on Cement-based Materials

Thaumasite form of sulfate attack（TSA） can be observed in cement containing limestone under sulfate condition at low temperature. Mixing with suitable mineral admixture could be a good choice to improve the TSA resistance performance of cement-based materials. We investigated the durability performance of limestone-cement mortars reinforced with silica fume（SF） in 5% MgSO_4 solution at 5 ℃. The mortars, which were immersed in aggressive condition, were prepared with 2%, 4%, 6%, 8%, and 10% cement replacement by SF at a fixed water-to-binder ratio. Appearance, compressive strength, change of length and mass and corrosion products were investigated to evaluate the TSA resistance performance of SF based specimens. The results showed that specimens in the absence of SF almost disintegrated. Increasing SF dosage can reduce the degree of deterioration of SF mortars in TSA environment. Mortar mixtures with more than 6% SF merely show slight degeneration in relation to macroscopic and microscopic tests and characterizations.

Review of advanced road materials, structures, equipment, and detection technologies

As a vital and integral component of transportation infrastructure,pavement has a direct and tangible impact on socio-economic sustainability.In recent years,an influx of groundbreaking and state-of-the-art materials,structures,equipment,and detection technologies related to road engineering have continually and progressively emerged,reshaping the landscape of pavement systems.There is a pressing and growing need for a timely summarization of the current research status and a clear identification of future research directions in these advanced and evolving technologies.Therefore,Journal of Road Engineering has undertaken the significant initiative of introducing a comprehensive review paper with the overarching theme of“advanced road materials,structures,equipment,and detection technologies”.This extensive and insightful review meticulously gathers and synthesizes research findings from 39 distinguished scholars,all of whom are affiliated with 19 renowned universities or research institutions specializing in the diverse and multidimensional field of highway engineering.It covers the current state and anticipates future development directions in the four major and interconnected domains of road engineering:advanced road materials,advanced road structures and performance evaluation,advanced road construction equipment and technology,and advanced road detection and assessment technologies.

Ferro-vanadium Slag in Improving Inner Chloride Solidification Rate of Cement Materials

We investigated the effects of ferro-vanadium slag(FVS)as a supplemental cementing material which can dissolve a large amount of active aluminum phases without excessive pretreatment or excitation to enhance the inner chloride solidified rate(CSR)of cement-based materials.Cement-FVS pastes with 0-30%content of FVS was designed,and the CSR was examined.Hydrates at different curing ages were studied by X-ray diffraction(XRD)and thermo-gravimetric analysis(TGA);hydration heat and^(29)Si nuclear magnetic resonance(^(29)Si-NMR)were tested to analyze the hydration degree of the system;mechanical properties in cement-FVS system were evaluated by compressive strength test,pore structure and the fractal regression.Results revealed that the incorporation of FVS could greatly promote the CSR of cement-FVS system.Compared with the control groups,30%dosage of FVS could increase the CSR by 69%at 3 d,47%at 7d,36%at 28 d and 34%at 60 d.It was demonstrated that the incorporation of FVS could enhance the chemical solidifying ability of chloride,and the main reason was the promoted generation of Kuzel’s salt and the Friedel’s salt in hydrate products,and the enhanced chloride migration resistance capacity by increasing the volume of gel pores in the cement-FVS system.Considering the influence of FVS on strength performance,this paper suggested that the suitable dosage of FVS as a supplemental cementing material was around 10%.The study in this paper might provide one efficient path to promote the chloride solidifying capacity of cement-based material and meanwhile the comprehensive utilization of FVS.

Influence of Associated Cations on the Transport and Adsorption of Chloride Ions in the Nano-channel of Calcium Aluminosilicate Hydrate Gel:A Molecular Dynamics Study

Molecular dynamics simulation was utilized to investigate the transport and adsorption of chloride in the nanopore of calcium aluminosilicate hydrate(C-A-S-H)with associated cation types of Ca,Mg,Na and K.The local ionic structure,atomic dynamics and bond stability were analyzed to elucidate the interaction between cations and chloride ions.The results show that interfacial chloride is absorbed through the ion pairing formation in the vicinity of C-A-S-H substrate.Interfacial cations can simultaneously interact aluminosilicate chains,water molecules and Cl^(-)ions,which restrict the motion of interfacial Cl^(-)ions.Pore solution chloride can be immobilized through the solvation effect of cations.Cations along with their hydration shell can connect to neighboring Cl^(-)ions to decrease their mobility.Owing to the varied ionic chemistry,cations show different interaction strength with neighboring water molecules and anions,which determines the chloride transport behavior in the nanopore of C-A-S-H.The chloride immobilization capacity of C-A-S-H nanopore with different associated cations is listed in following order:Mg^(2+)Ca^(2+)<Na^(+)≈K^(+),which agrees reasonably with previous experiments.