Photon-in/photon-out endstation for studies of energy materials at beamline 02B02 of Shanghai Synchrotron Radiation Facility

A new photon-in/photon-out endstation at beamline 02B02 of the Shanghai Synchrotron Radiation Facility for studying the electronic structure of energy materials has been constructed and fully opened to users.The endstation has the capability to perform soft x-ray absorption spectroscopy in total electron yield and total fluorescence yield modes simultaneously.The photon energy ranges from 40 eV to 2000 eV covering the K-edge of most low Z-elements and the L-edge of 3d transition-metals.The new self-designed channeltron detector allows us to achieve good fluorescence signals at the low photon flux.In addition,we synchronously collect the signals of a standard reference sample and a gold mesh on the upstream to calibrate the photon energy and monitor the beam fluctuation,respectively.In order to cross the pressure gap,in situ gas and liquid cells for soft x-ray absorption spectroscopy are developed to study the samples under realistic working conditions.

Characteristics of Sn-Doped Ge2Sb2Te5 Films Used for Phase-Change Memory

Sn-doped Ge2Sb2Te5 thin films deposited on Si（100）/SiO2 substrates by rf magnetron sputtering are investigated by a differential scanning calorimeter, x-ray diffraction and sheet resistance measurement. The crystallization temperatures of the 3.58 at.%, 6.92 at.% and 10.04 at.% Sn-doped Ge2Sb2Te5 thin films have decreases of 5.3, 6.1 and 0.9℃, respectively, which is beneficial to reduce the switching current for the amorphous-to-crystalline phase transition. Due to Sn-doping, the sheet resistance of crystalline Ge2Sb2Te5 thin films increases about 2-10 times, which may be useful to reduce the switching current for the amorphous-to-crystalline phase change. In addition, an obvious decreasing dispersibility for the sheet resistance of Sn-doped Ge2Sb2Te5 thin films in the crystalline state has been observed, which can play an important role in minimizing resistance difference for the phase-change memory cell element arrays.

Simulation of Phase-Change Random Access Memory with Ring-Type Contactor for Low Reset Current by Finite Element Modelling

A three-dimensional finite element models for phase change random access memory （PCRAM） is established to simulate thermal and electrical behaviours during RESET operation. The RESET behaviours of the conventional structure （CS） and the ring-type contact in bottom electrode （RIB） are compared with each other. The simulation results indicate that the RIB cell has advantages of high heat efficiency for melting phase change material in cell, reduction of contact area and lower RESET current with maintaining good resistance contrast. The RESET current decreases from 1.26mA to 1.2mA and the heat consumption in CST material during programming increases from 12% to 37% in RIB structure. Thus the RIB structure PCRAM cell is suitable for future device with high heat efficiency and smaller RESET current.

Effect of Mo doping on phase change performance of Sb_(2)Te_(3)

Mo,as a dopant,is doped into SbTe to improve its thermal stability.It is shown in this paper that the Mo-doped Sb_(2)Te_(3)(Mo_(0.26)Sb_(2)Te_(3),MST)material possesses phase change memory(PCM)applications.MST has better thermal stability than Sb_(2)Te_(3)(ST)and will crystallize only when the annealing temperature is higher than 250℃.With the good thermal stability,MST-based PCM cells have a fast crystallization time of 6 ns.Furthermore,endurance up to 4×10^(5) cycles with a resistance ratio of more than one order of magnitude makes MST a promising candidate for PCM applications.

Influence of Tilted Angle on Effective Linear Energy Transfer in Single Event Effect Tests for Integrated Circuits at 130 nm Technology Node

A heavy-ion irradiation experiment is studied in digital storage cells with different design approaches in 130？nm CMOS bulk Si and silicon-on-insulator （SOI） technologies. The effectiveness of linear energy transfer （LET） with a tilted ion beam at the 130？nm technology node is obtained. Tests of tilted angles θ=0 ° , 30 ° and 60 ° with respect to the normal direction are performed under heavy-ion Kr with certain power whose LET is about 40？MeVcm 2 /mg at normal incidence. Error numbers in D flip-flop chains are used to determine their upset sensitivity at different incidence angles. It is indicated that the effective LETs for SOI and bulk Si are not exactly in inverse proportion to cosθ , furthermore the effective LET for SOI is more closely in inverse proportion to cosθ compared to bulk Si, which are also the well known behavior. It is interesting that, if we design the sample in the dual interlocked storage cell approach, the effective LET in bulk Si will look like inversely proportional to cosθ very well, which is also specifically explained.

Understanding fundamentals of electrochemical reactions with tender X-rays:A new lab-based operando X-ray photoelectron spectroscopy method for probing liquid/solid and gas/solid interfaces across a variety of electrochemical systems

Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrolyte/electrode interfaces is essential for developing advanced renewable energy technologies.However,the direct probing of real-time interfacial changes,i.e.,the surface intermediates,chemical environment,and electronic structure,under operating conditions is challenging and necessitates the use of in situ methods.Herein,we present a new lab-based instrument commissioned to perform in situ chemical analysis at liquid/solid interfaces using ambient pressure X-ray photoelectron spectroscopy(APXPS).This setup takes advantage of a chromium source of tender X-rays and is designed to study liquid/solid interfaces by the“dip and pull”method.Each of the main components was carefully described,and the results of performance tests are presented.Using a three-electrode setup,the system can probe the intermediate species and potential shifts across the liquid electrolyte/solid electrode interface.In addition,we demonstrate how this system allows the study of interfacial changes at gas/solid interfaces using a case study:a sodium–oxygen model battery.However,the use of APXPS in electrochemical studies is still in the early stages,so we summarize the current challenges and some developmental frontiers.Despite the challenges,we expect that joint efforts to improve instruments and the electrochemical setup will enable us to obtain a better understanding of the composition–reactivity relationship at electrochemical interfaces under realistic reaction conditions.

Improvement of total-dose irradiation hardness of silicon-on-insulator materials by modifying the buried oxide layer with ion implantation

The hardening of the buried oxide （BOX） layer of separation by implanted oxygen （SIMOX） silicon-on-insulator （SOI） wafers against total-dose irradiation was investigated by implanting ions into the BOX layers. The tolerance to total-dose irradiation of the BOX layers was characterized by the comparison of the transfer characteristics of SOI NMOS transistors before and after irradiation to a total dose of 2.7 Mrad（SiO2）. The experimental results show that the implantation of silicon ions into the BOX layer can improve the tolerance of the BOX layers to total-dose irradiation. The investigation of the mechanism of the improvement suggests that the deep electron traps introduced by silicon implantation play an important role in the remarkable improvement in radiation hardness of SIMOX SOI wafers.

Nano-scale gap filling and mechanism of deposit-etch-deposit process for phase-change material

Ge2Sb2Te5 gap filling is one of the key processes for phase-change random access memory manufacture. Physical vapor deposition is the mainstream method of Ge2Sb2Te5 film deposition due to its advantages of film quality, purity, and accurate composition control. However,the conventional physical vapor deposition process cannot meet the gap- filling requirement with the critical device dimension scaling down to 90 nm or below. In this study, we find that the deposit-etch-deposit process shows better gap-filling capability and scalability than the single-step deposition process, especially at the nano-scale critical dimension. The gap-filling mechanism of the deposit-etch-deposit process was briefly discussed. We also find that re-deposition of phase-change material from via the sidewall to via the bottom by argon ion bombardment during the etch step was a key ingredient for the final good gap filling. We achieve void-free gap filling of phase-change material on the 45-nm via the two-cycle deposit-etch-deposit process. We gain a rather comprehensive insight into the mechanism of deposit-etch-deposit process and propose a potential gap-filling solution for over 45-nm technology nodes for phase-change random access memory.

Modulating surface oxygen species via facet engineering for efficient conversion of nitrate to ammonia

Electrochemical reduction of nitrate,a common pollutant in aquatic environment,to valuable ammonia(NO3-RR) using renewably-sourced electricity has attracted widespread interests,with past efforts mainly focused on designing electrocatalysts with high activity and selectivity.The detailed correlation between catalyst properties and NO3-RR kinetics,nevertheless,is still not fully understood.In this work,we modulate the surface oxygen species of Cu_(2)O via facet engineering,and systematically study the impact of these oxygen species on the NO_(3)^(-)RR activity.Combining advanced spectroscopic techniques,densi ty fu n ctional theory calculations and molecular dynamics simulations,we find that while oxygen vacancies on Cu_(2)O(111) surface promote the adsorption of reactants and reaction intermediates,hydroxyl groups effectively inhibit the side reaction of hydrogen evolution and facilitate the hydrogenation process of NO3-RR.These two effects work in concert to render Cu_(2)O(111) facet the highest NO3-RR activity relative to those from other facets.Our study provides critical insights into the synergistic effect of exposed facets and surface oxygen species on heterogeneous catalysis,and offers a generalizable,facet engineeringbased strategy for improving the performance of a variety of electrocatalysts important for renewable energy conversion.

Development of series SQUID array with on-chip filter for TES detector

A cold preamplifier based on superconducting quantum interference devices(SQUIDs)is currently the preferred readout technology for the low-noise transition edge sensor(TES).In this work,we have designed and fabricated a series SQUID array(SSA)amplifier for the TES detector readout circuit.In this SSA amplifier,each SQUID cell is composed of a first-order gradiometer formed using two equally large square washers,and an on-chip low pass filter(LPF)as a radiofrequency(RF)choke has been developed to reduce the Josephson oscillation interference between individual SQUID cells.In addition,a highly symmetric layout has been designed carefully to provide a fully consistent embedded electromagnetic environment and achieve coherent flux operation.The measured results show smooth V-Φcharacteristics and a swing voltage that increases linearly with increasing SQUID cell number N.A white flux noise level as low as 0.28μφ;/Hz;is achieved at 0.1 K,corresponding to a low current noise level of 7 pA/Hz;.We analyze the measured noise contribution at mK-scale temperatures and find that the dominant noise derives from a combination of the SSA intrinsic noise and the equivalent current noise of the room temperature electronics.

Formation of multifaceted nano-groove structure on rutile TiO_(2) photoanode for efficient electron-hole separation and water splitting

Photoelectrochemical(PEC)water-splitting using solar energy holds great promise for the renewable energy future,and a key challenge in the development of industry viable PEC devices is the unavailability of high-efficient photoanodes.Herein,we designed a TiO_(2) model photocatalyst with nano-groove pattern and different surface orientation using low-energy Ar+irradiation and photoetching of TiO_(2),and significantly improved the intrinsic activity for PEC water oxidation.High-resolution transmission electron microscopy directly manifests that the grooves consist of highly stepped surface with<110>steps and well-crystallized.Transient absorption spectroscopy reveals the groove surface that allows for increased recovery lifetime,which ensures promoted electron-hole separation efficiency.Surface photovoltage directly shows the carrier separation and transportation behaviors,verified by selective photodeposition,demonstrating the groove surface on TiO_(2) contributes to electron-hole separation.This work proposes an efficient and scalable photoanode strategy,which potentially can open new opportunities for achieving efficient PEC water oxidation performance.

Continuous Wave Performance and Tunability of MBE Grown 2.1μm InGaAsSb/AlGaAsSb MQW lasers

InCaAsSb/AlGaAsSb multi quantum well ridge waveguide lasers at 2.1 μm wavelength are fabricated by using molecular beam epitaxy. Continuous wave performance and tunability of the lasers are evaluated in a wide temperature range extend to 80℃. Output power of the laser at 30℃ exceeds 30 m W/facet at driving current of 0.5 A, the characteristic temperature To is 89K in 0-50℃ range. No fast degradation is observed in accelerated aging test at 90℃ for those lasers with lower Al content in cladding layers. Temperature tunability of the lasers is 1.36 nm/K. Single-mode output with side mode suppression ratios greater than 20 dB is achieved in a certain driving current region; current tunability is 8 × 10^-3 nm/mA regardless of mode hopping.

Growth Optimization, Strain Compensation and Structure Design of InAs/GaSb Type-II Superlattices for Mid-Infrared Imaging

InAs/GaSb type-II superlattce (T2SL) photodetector structures at the MWIR regime were grown by molecular beam epitaxy. The growth temperature and group-V soaking times were optimized with respect to interface and transport quality. Novel strain compensation schemes with insertion of InSb layers were proposed and tested to be efficient to tune the overall strain between tensile and compressive without degradation of interface and optical quality. The effect of the proposed methods is modeled by analytic functions.? Band structure calculations were also carried out for the proposed T2SL structures to assist optimizing sample designs. Single pixel photodiodes with a low dark current were demonstrated.

Pulse Wavelength Scan of Room-Temperature Mid-Infrared Distributed Feedback Quantum Cascade Lasers for N2O Gas Detection

The tunable diode laser absorption spectroscopy under a pulse wavelength scan scheme is adapted to home-made room-temperature mid-infrared distributed feedback quantum cascade lasers; and identification of N2O spectral fingerprint is demonstrated experimentally. By driving the laser at 800ns pulse duration, a wave number tuning of about 1.6cm^-1 is produced, which make both 1289.04cm^-1 and 1289.86cm^-1 absorption fingerprints of N2O gas to be definitely assigned. The measured relative absorption intensity is consistent with the HITRAN data precisely.

Investigation of SOI Substrates Incorporated with Buried MoSi2 for High Frequency SiGe HBTs

Highly arsenic-doped Si-on-insulator （SOI） substrate incorporated with buried MoSi2 layers is fabricated aiming at decreasing the collector series resistance of SiGe heterojunction bipolar transistors （HBTs） on SOI, thereby enhancing cutoff frequency （fT） performance and increasing the maximum value of fT （fTMAX ）. The .fT performance at medium current is enhanced and current required for fT = 15 GHz is reduced by half The value of fTMAX is improved by 30%.

Simulation of Voltage SET Operation in Phase-Change Random Access Memories with Heater Addition and Ring-Type Contactor for Low-Power Consumption by Finite Element Modeling

A three-dimensional finite element model for phase change random access memory is established to simulate electric, thermal and phase state distribution during （SET） operation. The model is applied to simulate the SET behaviors of the heater addition structure （HS） and the ring-type contact in the bottom electrode （RIB） structure. The simulation results indicate that the small bottom electrode contactor （BEC） is beneficial for heat efficiency and reliability in the HS cell, and the bottom electrode contactor with size Fx=80 nm is a good choice for the RIB cell. Also shown is that the appropriate SET pulse time is lOOns for the low power consumption and fast operation.

Combination of a reaction cell and an ultra-high vacuum system for the in situ preparation and characterization of a model catalyst

An in-depth understanding of the structure-activity relationship between the surface structure,chemical composition,adsorption and desorption of molecules,and their reaction activity and selectivity is necessary for the rational design of high-performance catalysts.Herein,we present a method for studying catalytic mechanisms using a combination of in situ reaction cells and surface science techniques.The proposed system consists of four parts:preparation chamber,temperatureprogrammed desorption(TPD)chamber,quick load-lock chamber,and in situ reaction cell.The preparation chamber was equipped with setups based on the surface science techniques used for standard sample preparation and characterization,including an Ar+sputter gun,Auger electron spectrometer,and a low-energy electron diffractometer.After a well-defined model catalyst was prepared,the sample was transferred to a TPD chamber to investigate the adsorption and desorption of the probe molecule,or to the reaction cell,to measure the catalytic activity.A thermal desorption experiment for methanol on a clean Cu(111)surface was conducted to demonstrate the functionality of the preparation and TPD chambers.Moreover,the repeatability of the in situ reaction cell experiment was verified by CO_(2) hydrogenation on the Ni(110)surface.At a reaction pressure of 800 Torr at 673 K,turnover frequencies for the methanation reaction and reverse water-gas shift reaction were 0.15 and 7.55 Ni atom^(-1) s^(-1),respectively.

Baseline optimization of SQUID gradiometer for magnetocardiography

SQUID gradiometer techniques are widely used in noise cancellation for biomagnetic measurements.An appropriate gradiometer baseline is very important for the biomagnetic detection with high performance.By placing several magnetometers at different heights along the vertical direction,we could simultaneously obtain the synthetic gradiometers with different baselines.By using the traditional signal-to-noise ratio（SNR） as a performance index,we successfully obtain an optimal baseline for the magnetocardiography（MCG） measurement in a magnetically shielded room（MSR）.Finally,we obtain an optimal baseline of 7 cm and use it for the practical MCG measurement in our MSR.The SNR about 38 dB is obtained in the recorded MCG signal.

Performance study of aluminum shielded room for ultra-low-field magnetic resonance imaging based on SQUID： Simulations and experiments

The aluminum shielded room has been an important part of ultra-low-field magnetic resonance imaging （ULF MRI） based on the superconducting quantum interference device （SQUID）. The shielded room is effective to attenuate the external radio-frequency field and keep the extremely sensitive detector, SQUID, working properly. A high-performance shielded room can increase the signal-to-noise ratio （SNR） and improve image quality. In this study, a circular coil with a diameter of 50 cm and a square coil with a side length of 2.0 m was used to simulate the magnetic fields from the nearby electric apparatuses and the distant environmental noise sources. The shielding effectivenesses （SE） of the shielded room with different thicknesses of aluminum sheets were calculated and simulated. A room using 6-mm-thick aluminum plates with a dimension of 1.5 m x 1.5 m x 2.0 m was then constructed. The SE was experimentally measured by using three-axis SQUID magnetometers, with tranisent magnetic field induced in the aluminum plates by the strong pre-polarization pulses. The results of the measured SE agreed with that from the simulation. In addition, the introduction of a 0.5-mm gap caused the obvious reduction of SE indicating the importance of door design. The nuclear magnetic resonance （NMR） signals of water at 5.9 kHz were measured in free space and in a shielded room, and the SNR was improved from 3 to 15. The simulation and experimental results will help us design an aluminum shielded room which satisfies the requirements for future ULF human brain imaging. Finally, the cancellation technique of the transient eddy current was tried, the simulation of the cancellation technique will lead us to finding an appropriate way to suppress the eddy current fields.

Optimization of pick-up coils for weakly damped SQUID gradiometers

The performance of a superconducting quantum interference device（SQUID） gradiometer is always determined by its pick-up coil geometry, such as baseline and radius. In this paper, based on the expressions for the coupled flux threading a magnetometer obtained by Wikswo, we studied how the gradiometer performance parameters, including the current dipole sensitivity, spatial resolution and signal-to-noise ratio（SNR）, are affected by its pick-up coil via Mat Lab simulation.Depending on the simulation results, the optimal pick-up coil design region for a certain gradiometer can be obtained.To verify the simulation results, we designed and fabricated several first-order gradiometers based on the weakly damped SQUID with different pick-up coils by applying superconducting connection. The experimental measurements were conducted on a simple current dipole in a magnetically shielding room. The measurement results are well in coincidence with the simulation ones, indicating that the simulation model is useful in specific pick-up coil design.